Error 3314 Can't Trap In A Form
Jul 13, 2005
Hi, this a great forum and i'm asking for help :)
1.i trapped error 3314 and other errors at my custm buttons(save,edit...) but...
at my 2 forms(one single and the other continuous, access gives me an error about an empty field in a table (primary id), when i press tab (it moves to next record).
The same action has my continuous form when i click at an empty field at next record or pressing tab with empty values at primary fields.
What can i do to post my own messages?
2. I have a text box (a) that takes value form an other text box (b): b=2*a. both text boxes send values to a table
How can i prevent user from chanching the value on (b) text box?
thanks in advance
Dimitris Greece (sorry for my bad english)
View Replies
ADVERTISEMENT
Aug 23, 2005
I have a form with 22 data fields.
There are 4 entry flow paths.
(1) is 1 to 9, 10, 20 to 22
(2) is 1 to 9, 11 to 14, 20 to 22
(3) is 1 to 9, 15 to 17, 20 to 22
(4) is 1 to 9, 15 to 17, and stop at 19.
If information is in Field 10, then I need to prohibit entry in the other 3 paths.
How can I do this?
View 1 Replies
View Related
Apr 4, 2006
Hi, I have a button in a form that loads a report, if there is no data in the report then 2 error messages are displayed, however as these messages have no affect and they do no harm as such I would like to prevent them from being displayed. The error messages are error 91 “invalid use of isnull” error and error 2501 “cancel event error message”
I’ve been able to prevent either error 91 from being displayed or alternatively 2501 using a single if statement but not both of them together using two if statements.
(If error 94 is displayed, I would still like the report to open, error 2501 is displayed after the report is closed if there’s no data & i just want this message not to be shown)
Any ideas what im doing wrong? :confused: any help much appreciated
Regards
Kevin
Below code works ok (to trap just the one error message):
Err_cmdPreview_Click:
If Err.Number = 2501 Then ' ignore cancel event error
Else
MsgBox Err.Number & " - " & Err.Description
End If
Resume Exit_cmdPreview_Click
End Sub
But the below code here doesn’t work (when I use 2 if statements to try & trap both of the error messages)
Err_cmdPreview_Click:
If Err.Number = 94 Then ' ignore isnull error
DoCmd.OpenReport stDocName, acNormal
Else
If Err.Number = 2501 Then ' ignore cancel event error
Else
MsgBox Err.Number & " - " & Err.Description
End If
Resume Exit_cmdPreview_Click
End Sub
View 6 Replies
View Related
Jun 30, 2005
I'm using Pat Hartman's code to select items from a list box and then append the records to a table. If a user doesn't select anything before clicking the buttom I'm trying to give them an error message. I've tried it in various places but can't get it to work. The attached is giving me the error message regardless of whether they have selected anything or not.
On Error GoTo Err_CreateAttendanceRecords_Click
Dim i As Variant
Dim dbs As DAO.Database
Dim rst As DAO.Recordset
Dim qd As DAO.QueryDef
Set dbs = CurrentDb
Set qd = dbs.QueryDefs!qrynewvaluations2
Set rst = qd.OpenRecordset
If i = 0 Then
MsgBox "You must select at least one property before continuing"
Exit Function
End If
For Each i In ctlref.ItemsSelected
rst.AddNew
rst!valprop = ctlref.ItemData(i)
rst!valdate = Me.txtValDAte
rst.Update
Next i
Set rst = Nothing
Set qd = Nothing
MsgBox "Records Created"
exit_createattendancerecords_Click:
Exit Function
Err_CreateAttendanceRecords_Click:
Select Case Err.Number
Case 3022 'ignore duplicate keys
Resume Next
Case Else
MsgBox Err.Number & "-" & Err.Description
Resume exit_createattendancerecords_Click
End Select
Any suggestions?
Thanks
Dawn
View 4 Replies
View Related
Jun 20, 2005
If you open the attached sample you will see what my problem is.
I have Form /Subform with look up combo that will not allow duplicate entries in same subform record. This works fine, access displays an error when a duplicate has been added as it should. What I want to do is trap that error myself and display a msgbox that will allow the entry to undo (the msgbox undo etc I can handle, it the trapping of the error)
Thanks in advance.
View 4 Replies
View Related
Sep 16, 2005
:confused:
I would like to trap event name where an error has taken place in.
I do not want to type in every event name by hand for each error messge.
Exit_Command27_Click:
Exit Sub
Err_Command27_Click:
Call ErrorLog(Me.Name, EventName, Err, Err.description)
Resume Exit_Command27_Click
View 2 Replies
View Related
Dec 1, 2005
How do I programmatically force an error dialog to make a certain choice?
I'm able to trap the dialog via the following code:
Private Sub Form_Error(DataErr As Integer, Response As Integer)
If DataErr = 7787 Then 'record updated by another "user" (subform)
MsgBox "Error trapped!"
Response = acDataErrContinue
Else
Response = acDataErrDisplay
End If
End Sub
Problem is, if I bypass the 7787 error in this manner, it defaults to dropping the changes, rather than saving the record, which is what I want. (Both are choices on the dialog.)
Any help would be most appreciated.
View 7 Replies
View Related
Feb 26, 2007
i am using access against an Oracle DB through an ODBC driver, and when appending records to a local table, if access gets an Oracle record error "#deleted", the append query aborts. . . that's fine, but I can't figure out how to trap the error to get the rest of the records. . .
ugh! see attached graphic
thanks
sportsguy
View 3 Replies
View Related
May 16, 2015
I have a Composite Index to prevent duplicates I get the error message. How can I trap this?
I resolved it with this PHP Code:
'Trap Error.
Dim DataErr As Integer
Dim Response As Integer
Dim Message As String
If DataErr = 3022 Then 'Duplicate value entered
Response = acDataErrContinue
End IfÂ
View 2 Replies
View Related
Sep 23, 2014
I am importing .txt files into Access table via VBA code (i.e., not via Saved Import Spec). Is there a way to trap the error if a particular field does not get imported due to incorrect format? When you import via Saved Import Spec and there are errors in formatting, Access generates an 'ImportErrors' table, which tells you which fields could not be updated.
Is there a way to generate a similar 'ImportErrors' table with VBA error checking?
View 4 Replies
View Related
Oct 18, 2006
I know this topic has been covered over and over but I've searched and searched and can't find my answer. I did find one post with a link to a possible answer but the link was broken.
My form has a required field. When a user attempts to X out of the form I have code in the Before Update event that checks this field and if it is blank:
MsgBox "Payment Terms must be filled in before closing the form"
Me.PaymentTerms.SetFocus
Cancel = True
The message box appears, but then the
You can't save this record at this time...blah blah blah.....
dialog appears and then the form closes.
How can I prevent the user from closing the form if this field is blank? It seems like once the X is clicked there is no turning back. I realize that I could remove the close button (X) from the form and use a command button instead but this may only mess up the users who have been using this DB for years. Is there any way to go backward once the close button has been clicked?
Thanks for your help.
View 6 Replies
View Related
Jun 20, 2006
Hi,
I need a way at preventing users from using the scroll funtion on mouses from creating a multitude of balnk records and hence was looking at ghudson better mouse trap as a way of doing this... this is the way forward isnt it?
Looking at the code it starts with...
'For those of us not using Access XP, we have a challenge to prevent
'our users from advancing to another record if they do not use the controls
'we want them to use or to prevent them from bypassing our validation
'procedures too ensure the current record is okay to be saved.
How do you prevent this from happening in Access XP?? Access XP = 2002 does it not?
Regards
H.
View 3 Replies
View Related
Jul 28, 2006
First off sorry about the really bad layout…..I don’t know how to do all the fancy stuff but really wanted to share this because it seams like a lot of people wanted help with this.
So here is what I have going on.
I have a form to add a record, and I have a number of fields, then an “Add Record” button and a “Cancel Record” Button. What I wanted to do was:
A: Stop the form from going to another “New Record Form” when moving the mouse wheel
B: Stop the form from going to another “New Record Form” when pressing the “Tab” key
Here is what you got to do to solve the mouse problem:
1.) Create a field in the form that has the Name “MouseWheel Move”, and set the “Visible” property to “No”
2.) Enter the Fallowing:
Private Sub Form_Load()
Me![MouseWheel Move] = "No"
End Sub
3.) Enter The Fallowing:
Private Sub Form_MouseWheel(ByVal Page As Boolean, ByVal Count As Long)
Me![MouseWheel Move] = "Yes"End Sub
4.) Enter The Fallowing:
Private Sub Form_BeforeUpdate(Cancel As Integer)
If Me![MouseWheel Move] = "Yes" Then
DoCmd.CancelEvent
Me![MouseWheel Move] = "No"
End If
End Sub
Here is what you got to do to solve the Tab problem:
The last item on my form is my “Cancel” button; so when the focus is on my “Cancel” button (ie. the last item on the form) and I press tab I want the focus to go to the first field on my form.
Private Sub Cancel_Button_KeyDown(KeyCode As Integer, Shift As Integer)
If KeyCode = 9 Then
Me![Field Name for the First Item on the Form].SetFocus
End If
End Sub
One more thing, I am using Microsoft Access 2002 (10.6771.6735) SP3 and it works fine
View 8 Replies
View Related
Mar 1, 2006
Hi everyone
I posted this question about an hour ago but I seem to have been logged out by the time that I actually pressed "send", so I don't know whether it was posted correctly - I can't find it!
I've created four buttons on a form to negotiate my way through the records. When I come to the end, a message box is shown stating that the next record cannot be found (it doesn't exist). Can I trap this message and use it to activate some code? I thought about a form popping up (in "corporate" colours to match the remainder of the database) or a form asking whether I want to add another record.
I looked at the code that Access generated when I made the buttons, and I saw the following:
Err_MyButton_Click:
MsgBox Err.Description
Resume Exit_MyButton_Click
I "remmed" out the middle line, but the automatic message box still appeared. I added a line of code: <MsgBox Err.Number>, but that didn't give a result, so I guess that the message box that's being shown isn't generated via this snippet of code.
I know that I could disable the relevant button when the record number reaches the end or add another button to add a new record, but I'd like to trap this automatic message box. Can I do so, and, if so, how?
Thanks for your time.
View 1 Replies
View Related
Jun 28, 2005
Hi guys . i wonder how i can trap the following errors in access 2000 forms.
I have the database tables in sql server 2000 and front end is made by access 2000
forms. I be happy if some one show me how i can trap these errors and promt aproperte message
to the user when they violate them using forms.Thanks
1)Violation of not null constraint
2)primary key violation
3)Trigger violation
4)and other erros
View 1 Replies
View Related
Sep 22, 2006
I'm using GHudson's A Better Mouse Trap code. It works great. However, I added other code from http://www.databasedev.co.uk/image-form.html to get and save the path to image files and now I think there is a conflict between the sets of code.
The Images tab on the form frm_CreateNewSpec is where I have problems. The error messages are definitely from Mouse Trap...I just don't know how to resolve the problem.
I've probably missed something simple, but don't know what.
Any and all assistance is greatly appreciated by this novice.
Randy
View 2 Replies
View Related
Nov 13, 2014
I got an error msg on form with closing. I have a main form (SalesReturnOrDamaged) and subform (SalesReturnOrDamagedSubform).
i have used a VBA code on main form Close Command button as per shown in Code Tag. But that is not working and shown an error msg as per screenshot. how to change that VBA code for empty form close without save the record?
Code:
Private Sub Close_Click()
On Error GoTo Err_Close_Click
If Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![ItemCode].Value = "" Then
Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![Product].Value = ""
Forms![SalesReturnOrDamaged]![SalesReturnOrDamagedSubform].Form![MRP].Value = 0 Or ""
[code]......
View 1 Replies
View Related
Nov 1, 2006
Hi, i have a problem with a form, i don't know how to make a reference to a form property. The code is the following:
Private Sub cmdCautare_Click()
Dim strSQL As String, strOrder As String, strWhere As String
strSQL = "SELECT tblDosare.DosarID, tblDosare.DenumireDosar, tblDosare.CodDosar, tblDosare.DataDosar, tblInstante.Localitate, tblStadiu.Data, tblStadiu.Stadiu FROM tblInstante INNER JOIN (tblDosare INNER JOIN tblStadiu ON tblDosare.DosarID = tblStadiu.Dosar) ON tblInstante.InstantaID = tblDosare.Instanta"
strWhere = "WHERE"
strOrder = "ORDER BY DosarID"
If Not IsNull(Me.txtDenumire) Then
strWhere = strWhere & "(DenumireDosar) Like '*" & Me.txtDenumire & "*'"
End If
Forms!frmRezultateCautare.RowSource = strSQL & " " & strWhere & "" & strOrder
DoCmd.OpenForm "frmRezultateCautare", acNormal
End Sub
The problem is on this line:
Forms!frmRezultateCautare.RowSource = strSQL & " " & strWhere & "" & strOrder
The error message is the following: MS Access can't find the form 'frmRezultateCautare' referred to in a macro expression or Visual Basic code.
The form contains a list and is used to display the search results w.r. to the criteria from a main search form. If anyone can help i will apreciate it.
Thanks
View 1 Replies
View Related
Mar 5, 2005
Hello Access World Pros!
I have a problem with some errors on a form/query that has been running circles around me for 4 hours now on a saturday night!!
Im trying to implement an error control message when a user does not select an employeeID on the main form, whilst they are on the subform. But with no joy! Also, I run into errors when a user enter the same item twice on the same subform! Access exclaims that there are duplicate values.
Please look at the simple access db attached and use the "acq" form. Maybe someone out there can enlighten me coz in all honesty im stumped!!
Cheerz :D
View 2 Replies
View Related
Mar 11, 2005
Help
I have been asked to amend an error occuring on a database which uses a QBF form to filter items in a very large table. The problem which is occuring, from what I can see, is that the first record in the table is automatically visible in the combo box which is used to select the filters.
If then someone changes the field in a combo box to filter on a different area the first record (ID) in the table is automatically edited.
I assume it is something to with Bound and unbound but dont know enough about access to know how to do it.
How can I allow users to select different options from a combo box without it amending data in the table.
Ange
View 2 Replies
View Related
May 10, 2005
HI when i use my form I get the following error when i use one part of it. The error is
You can't reference a property or method for a control unless that control has focus
Can't someone help me please
Thanks
Chris Lynch
View 3 Replies
View Related
Mar 20, 2006
I have created a subform where you select a vendor from a combo box and this then allows you to view all software of the selected vendor in a tabular view. When I use this form and then try to go into design view or close the form, i get the following error message:
'The changes you requested to the table were not successful because they would create duplicate values in the index, primary key, or relationship. Change the data in the field or fields that contain duplicate data, remove the index, or redefine the index to permit duplicate entries and try again'
I have tried removing the index and changing the index to permit duplicates but this has not worked.
Could anyone tell me abit more about this error and how to get rid of it?
Many Thanks
View 2 Replies
View Related
Nov 29, 2004
I Cannot Seem To Understan Why My Formulas On My Form Keep Giving Me The #error Message....
View 3 Replies
View Related
Mar 16, 2008
Okay, I know this is probably simple, but I am getting an error in putting a total on a form. I have the following:
Subform name is EntryDetail Subform
I have a field in the footer called TotalEntry that calculates the total entry. The formula is =sum([EntryAmt])
Form name is Entry
I have a textbox with the control =[Entry Subform].Form!TotalEntry
The text box shows #Name?
I am attaching a copy of the database.
Any ideas?
View 3 Replies
View Related
Jan 26, 2005
I have a button that opens another form to enter data on. But when I click the button I am getting the error msg: "Can't find project or library." And the debugger goes to the following sub routine and highlights Date in 3rd line(tried to bold).
This only happens on 1 user's machine. The other 4 computers open it flawlessly. All 5 have the same setup/security. Don't know why it works on 4 and not the last one. Any ideas?
(Access97.)
Private Sub Form_Open(Cancel As Integer)
Dim x As Long
Me.txtEntryDate.Value = Date
Me.lblErrMsg.Caption = ""
CurrentRateCode = ""
CurrentUnitFactor = 0
CurrentCartonFactor = 0
Set PTdb = CurrentDb()
Dim rsVASRate As Recordset
Set rsVASRate = PTdb.OpenRecordset("SELECT * FROM tblVASRateCodes", dbOpenDynaset)
x = 0
Do Until rsVASRate.EOF
VASRate(x).RateCode = rsVASRate(0)
VASRate(x).UnitFactor = rsVASRate("UnitValue")
VASRate(x).CartonFactor = rsVASRate("CartonValue")
x = x + 1
rsVASRate.MoveNext
Loop
VASRateTableCount = x - 1
rsVASRate.Close
DoCmd.RunSQL ("DELETE * FROM tblVASData") 'clear VAS data summary table
If TableExists("tblVASEntry") Then
DoCmd.RunSQL ("DELETE * FROM tblVASEntry") 'clear VAS data entry table
Me.subform_VASEntry.Requery
Else
DoCmd.RunSQL ("CREATE TABLE tblVASEntry (VEID IDENTITY PRIMARY, 'Rate Code' INTEGER, Units INTEGER, Cartons INTEGER);")
End If
End Sub
View 1 Replies
View Related
Mar 31, 2005
I have a form with most of the fields being date fields. If I put a text box instead of DTpicker it works fine but when I use DTpicker it gives me an error like this "Can't set value to NULL when checkbox property = FALSE". And also when I use DTPicker it inputs time also which I don't like. I want only short date to be inputed in the table. Any idea why it is doing so. Can you please help me with this. Also suggest me if this is the right way of inputing data to the table or should I use ADO's or DAO's concept to input the data in the database.
I have to generate some reports based on this form. Could anyone suggest me please.
Any suggetions on this form it would be great!!
Thanks
vs
View 4 Replies
View Related
