Error: There Are No Registered Wizards Of This Type...
Oct 18, 2005
In Microsoft Access 2000 I'm getting the following error message when I click on visual basic Event Procedure for the first time.
"There are no registered wizards of this type."
"Rerun Microsoft Access or Microsoft Office Setup to reinstall the wizards. If you want to preserve your security or custom settings, back up the 'workgrp file name here' workgroup information file.
For more information on backing up files, search the Microsoft Windows Help Index for 'backing up files'."
After I click OK on the error it goes back to Access. If I click the event procedure again visual basic opens up though VB the screen isn't what it suppose to be. The Object and Procedure pull downs at the top of the page disappear behind my toolbars and I can't get it to setup correctly. If I try to maneuver them correctly they still don't line up. This error seems to be messing that screen up.
This is only happening in one of my databases. In my other database the Object and Procedure pull downs at the top of the page are coming up correctly. If I start a new database that works fine too. I'm not sure why its doing it only on this database
I'm worried my VB is corrupted. Looking for any insight on what caused this and how to fix this.
I am running Office 2010 but at one time also had Office 2013 installed on my Windows 7 64 bit OS PC. The first attachment (AccessProblem) shows the error message that I get when it hits the
Set olApp = CreateObject("Outlook.Application")
line. I get the automation error - library not registered error. The second attachment (Access2Problem) shows the references that I have.
I have never used wizards with access (or anything else for that matter). What is general view? Are they actually good news or do they get binned with witches and warlocks? I could use some of the techniques involved but where does one find an intro - preferably using access.
I'm somewhat new to Access, so I'm using the wizards to get me started to make forms and reports.
When you first click on the "Create Form by Using Wizard" it asks you to select the fields you want to use from the selected Table or Query. Unfortunately no fields show in the "Available fields" box.
I know I have fields in each table or query. I even tried to make a dummy table using their field names incase mine contained invalid characters.
I've tried it in both the Form wizard and the Report wizard.
The fields of all the tables and queries used to show up when I first install Access.
What am I doing wrong? Should I try to reinstall the program?
i am using MS Access 2010, i am on initial stage and i have to made main log in form or switch board, but as soon i create a blank form and click on button in design but only command button appeared but not along with command buttong wizards so i will select button to close application or to open a farm and so
I want to Count the amount of not treated improvements after 1 month in a report. The rules will be if the improvement cell is empty one month after the date the improvement is registered, then it should be counted.
The problem occurs on a WinXP machine with Access 97.
When Access is run as a Power User everything works fine but when it runs under a user account that is a standard "User" non of the wizards function properly.
By changing some file permissions I can get the control, form and report wizards to work but the Import Data wizard still fails.
I'm sure this is a permissions issue and can be fixed by changing the security settings for some registry keys or files, but have no idea which ones.
I have a VBA program which is stored in an Access database. The program creates letters using Word template documents as well as new Excel sheets. When one of the users in my team undertakes this process she is unable to create the files (although she could before). The following error message occurs initially for the word documents:
"The document could not be registered word 2010. It will not be possible to create links from other documents to the document"
When I enter debug and attempt to run the code again the file opens but subroutine halts again and I get a different message:
"Could not open Macro storage"
The line of code which is identified for both errors is:
Set wdDoc = wdApp.Documents.Open(TemplateLocation)
Where wdDoc is the a Word.Document, wdApp is a Word.Application and TemplateLocation is the path for the template
I have already checked the following:
- 'Trust access to the VBA project object model' in the Trust centre is ticked and Macro Security is set to none. - DCOM Server Process Launcher is set to automatic in Services (Local)
I have a form that is based on a parameter query. The user inputs an item number and the form opens in edit mode. The user clicks the "duplicate" command button and then changes the item number. I've incorporated GHudson's "A Better Mouse Trap" logic and when clicking "save" I get the type mismatch error.
I don't understand why Access is not returning the 3022 duplicate entry error.
When I click "debug" Access highlights the line as shown below:
Err_bSave_Click: If Err = 2046 Then 'The command or action Undo is not available now Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_bSave_Click End If
I am trying to do a basic query and I keep getting a "Type Mismatch" error and the query will not run. If I only do a query on one table, it works no problem so I know it must be related to my Join between tables.
For the two tables that are joined (it is one-to-many)- the first table is a clients table and I created a field called ClientNumber that is an AutoNumber. The second table is called TrainingRequests. This will store the training requests for each client and each client can have multiple training requests. I created a field called ClientNumber in it as well (this is what field I linked the tables by). But I set it to text instead of AutoNumber.
Is there a way to do a query with the two tables? Or will I have to change something in table design? I already have some data in the tables so I am not sure what direction to take.
Thanks for any help someone can provide. It would be greatly appreciated.
I created a Duplicate command/macro on a form and, when it is clicked on, a message appeared 'Run-time error '13' Type mismatch'. Debugging the command showed the problem was this code line:
MsgBox Err.Number, Err.Description
in the bDuplicateCurrentRecord section (shown below).
Below is the whole Duplicate coding. The coding was copied from another Duplicate template db as I am no expert on coding. It worked on 97 version but not on 2000 version.
Private Sub bDuplicateCurrentRecord_Click() On Error GoTo Err_bDuplicateCurrentRecord_Click
Beep
Dim sBookingID As String Dim sSerialNo As String Dim sNameOfHost As String Dim sTrustOrNonTrust As String Dim sDepartment As String Dim sContactTelephone As String Dim sContactMobile As String Dim sContactFax As String Dim sDateOfRequest As String Dim sDateOfFunction As String Dim sTimeRequiredStart As String Dim sTimeRequiredEnd As String Dim sVenue As String Dim sReasonForBooking As String Dim sNoOfGuests As String Dim sStandingOrder As String Dim sComments As String Dim sBookingReceivedBy As String Dim sNonStandardCharge As String Dim sTrustTotalCost As String Dim sNonTrustTotalCost As String Dim sWhenPaymentMade As String Dim sPaymentMethod As String
Err_bDuplicateCurrentRecord_Click: If Err = 94 Then 'Invalid use of Null' Beep MsgBox "A box is incomplete. Please ensure that all boxes are completed before attempting to duplicate the current booking.", vbInformation, "Invalid Duplication" Exit Sub ElseIf Err = 2113 Then 'The data you entered is not valid for this box. Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_bDuplicateCurrentRecord_Click End If
End Sub
Private Sub bDeleteCurrentRecord_Click() On Error GoToErr_bDeleteCurrentRecord_Click
Beep If MsgBox("Are you sure you want to delete the current record?", vbQuestion + vbYesNo, "Delete Current Record?") = vbYes Then DoCmd.RunCommand ac CmdDeleteRecord End If
Exit_bDuplicateCurrentRecord_Click: Exit Sub
Err_bDeleteCurrentRecord_Click: If Err=2501 The 'The RunCommand action was cancelled Exit Sub Else MsgBox Err.Number, Err.Description Resume Exit_bDeleteCurrentRecord_Click End If
I am getting the following error when I try to present some information from a database:
Microsoft JET Database Engine error '80040e07' Data type mismatch in criteria expression. /tribute2.asp, line 168
The code relating to this is: The error line it is talking about is: Code:rsGuestbook.Open SQLstr, adocon
Code: <%Dim adoCon 'Holds the Database Connection ObjectDim rsGuestbook'Holds the recordset for the records in the databaseDim SQLstr'Holds the SQL query for the databaseSet adoCon = Server.CreateObject("ADODB.Connection")adoCon.Open = "PROVIDER=Microsoft.Jet.OLEDB.4.0;DATA SOURCE=c:inetpubftprootlocalusericlay emember ing.co.nzdb emembering.mdb;"strcustomerID = Request.QueryString("remID")Set rsGuestbook = Server.CreateObject("ADODB.Recordset") sqlstr = "select * from guestbook where guestbook.mid =" & strcustomeridrsGuestbook.Open SQLstr, adoconDo While not rsGuestbook.EOF'Write the HTML to display the current record in the recordsetResponse.Write ("<font face='Arial' size='2' color='#000080'><i>A tribute provided by ")Response.Write (rsGuestbook("confirstname"))Response.Write (" ")Response.Write (rsGuestbook("conlastname"))Response.Write ("</i></font><font face='Arial' size='1' color='#000080'><i> ")Response.Write (rsGuestbook("conrelationship"))Response.Write ("</i></font><br><br>")Response.Write (rsGuestbook("conmessage"))Response.Write ("<br>")'Move to the next record in the recordsetrsGuestbook.MoveNextLoop'Reset server objectsrsGuestbook.CloseSet rsGuestbook = NothingSet adoCon = Nothing%>
Can anyone see where I have gone wrong ... could it be something to do with the fact that 'remid' relates to another table in the database. Though when I did a reponse write on the sqlstr it is presenting the remid.
I changed one of my queries to generate the period off a date in a field. The simple expression is:
Period: Month([Act Del])
It give me the number of the month...however now I am getting this error. I assume that the number of the month is not matching with the other data types....but I need to know who to fix it.
I am getting the following error when I run my report:
"The Object type argument for the action or method is blank or invalid"
I am running the following code from a report.
Thanks
Private Sub Report_Open(Cancel As Integer) Dim intRetValue As Integer intRetValue = MsgBox("CREATE EXCEL SPREADSHEET?", vbYesNo)
cswSetReportOptions MsgBox "cswSetReportOptions complete" 'mac - new record source to filter blank company name Me.RecordSource = "SELECT * FROM qry2 WHERE strCompanyName <> """" "
If intRetValue = vbYes Then MsgBox "Creating excel spreadsheet" DoCmd.OutputTo acOutputReport, , acFormatXLS, "Book1.xls", True DoCmd.Close End If MsgBox "Creating Access Report" End Sub
Hello all - One of my 3 users' computers keeps coming up with an error when I try to enter the following command in the "Validation Rule" field of the table design view:
>=#1/1/1998# And <=Date()
Some investigative work showed that it's erroring on this clause: "<=Date()". Any idea why it would error on her pc and not the other 2 pc's? Her pc is old, but we're all using Access 2002. The error says: "The function you entered can't be used in this expression." Any thoughts would be helpful. Thanks much.
I have a macro that I run. In this macro, I've changed the "SetWarnings" to No. This works since I do not get a "Are you sure..." when I do a makeTable query and the table already exists.
However, I do get a type conversion failure error message.
Does someone know how I click Yes on this without any intervention on my part when the macro is running? Would entering keystrokes in the macro work? I don't think that they will since the next command is not called until the previous has executed ... and I'm getting hung up on the dialog box before the make-table command has finished execution.
I've attached the error message text that I'm seeing.
Could someone please help. I am in a serious time crunch and cannot figure out what I have done wrong. I have copied the module attached for the audit trail and have implemented it into my database. For some reason when I go to run the BeforeUpdate event I get a 13-Type Mismatch error. I have found a fix that will allow me to use the code without flagging an error, but I am not sure it is working properly now. Here is the fix.
1. Pass the form as an argument of the function Function AuditTrail(frm as Form)
2. Comment out these lines in the code 'Dim frm as Form 'Set frm=Screen.ActiveForm
3. Call the function in the BeforeUpdate event of the form and or subform as follows: Call AuditTrail(Me)
common error in VBA imports. It has happened with spreadsheets and text files I have users importing. An error message pops up "Type Mismatch." But the import appears to work correctly. So I added code that On Error, if error Like "*Type mismatch*" continue to next step. Now the user gets a longer error message: "The expression On Click entered as the event property setting produced the following error: Type mismatch." Again, the import still works, but this message is annoying! The even stranger thing is that I do not get this error message on my machine. Just the other users.
I've been trying to get a query to run but I keep the "type mismatch in expression" error message.It's the Invoice-Product Query in the attached file.I have tried changing the field types, the primary keys and messed around with the relationships but noting seems to work.
