Error In Update Synatx
Aug 25, 2006
I'm getting an error when I try to run an update query on my form. I was hoping someone would be able to give me a hand.
Here is my error:
Code:Microsoft JET Database Engine error '80040e14'Syntax error in UPDATE statement./purchasing/admin/editor.asp, line 185
Here is the query I am trying to run:
Code:sql="UPDATE [General] SET " sql=sql & "fldName='" & Request.Form("fldName") & "'," sql=sql & "fldPhone='" & Request.Form("fldPhone") & "'," sql=sql & "fldDateSub='" & Request.Form("fldDateSub") & "'," sql=sql & "fldTimeSub='" & Request.Form("fldTimeSub") & "'," sql=sql & "fldDepartment='" & Request.Form("fldDepartment") & "'," sql=sql & "fldQuantity='" & Request.Form("fldQuantity") & "'," sql=sql & "fldDescription='" & strfdesc & "'," sql=sql & "fldStatus='" & Request.Form("fldStatus") & "',"if request.form("fldStatus")="Closed" then sql=sql & "fldTimeClosed='" & XTimeClosed & "'," sql=sql & "fldDateClosed='" & XDateClosed & "',"else sql=sql & "fldTimeClosed='" & Request.Form("fldTimeClosed") & "'," sql=sql & "fldDateClosed='" & Request.Form("fldDateClosed") & "',"end ifif Request.form("fldPrevious")="None" AND Request.Form("fldResolution")<>"None" then sql=sql & "fldResolution='" & XDateClosed & ":" & XTimeClosed & " - " & strfreso & Chr(13) & Chr(10) & "',"else if request.form("fldResolution")="None" thenif request.form("fldPrevious")="None" then sql=sql & "fldResolution='" & strfreso & "',"elsesql=sql & "fldResolution='" & strfprev & "',"end ifelsesql=sql & "fldResolution='" & strfprev & XDateClosed & ":" & XTimeClosed & " - " & strfreso & Chr(13) & Chr(10) & "',"end ifend if sql=sql & "fldIP='" & Request.Form("fldIP") & "'," sql=sql & "fldPoNumb='" & Request.Form("fldPoNumb") & "'," sql=sql & "fldSent='" & Request.Form("fldSent") & "'," sql=sql & "fldFillDate='" & Request.Form("fldFillDate") & "'," sql=sql & "fldSignat='" & Request.Form("fldSignat") & "'," sql=sql & " WHERE fldTicketID=" & cidresponse.write(sql) conn.execute sql if err<>0 then response.write("No update permissions!") else response.write("Record " & cid & " was updated!") Response.Buffer = True MYMESSAGE = Server.URLEncode("Ticket updated...please wait while you are directed back to the Ticket List...") Response.Redirect ("delay.asp?DELAY_TIME=5&DELAY_MESSAGE=" & MYMESSAGE & "&REDIRECT_URL=http://intranet/tickets/admin/viewer.asp") end if end ifconn.close%>
I am using this code from a working editor that I made and cannot seem to figure out why it won't work now. Any help is greatly appreciated. Thanks.
View Replies
ADVERTISEMENT
Nov 7, 2006
Can someone look at this update statment i just wrote? It's giving an error.
i.e.
UPDATE [Upload Trades] LEFT JOIN UploadAccts ON [Upload Trades].CustAcct = UploadAccts.CustodyAccount SET [Upload Trades].Client = [uploadaccts].[client], [Upload Trades].Account = [uploadaccts].[account]
WHERE ((([Upload Trades].Account)<>[uploadaccts].[account]));
Error msg - "Operation must use an updateable query"
Thank you.
View 1 Replies
View Related
Oct 18, 2006
I have two identical tables with one being created by coping the structure of the other. Table A is my primary table. Table B is my new data imported table. I created a Update query with a dlookup to update Table A's address field from Table B. All records fail to append due to type conversions.
Here is the dlookup:
DLookUp("[Address]","Table_B","[ID_number] = " & [ID_number])
I need this to work and I have no idea why I am getting the conversion problem.
View 2 Replies
View Related
May 15, 2006
I've been agonizing over this all day! This is the SQL for the query that I built:
UPDATE [Compl P129 A3C] INNER JOIN MasterFundSch ON [Compl P129 A3C].LOANNUMBER = MasterFundSch.[Loan Number] SET MasterFundSch.P129OldInv = [OLDINVNUMBER], MasterFundSch.P129OldCat = [OLDCATNUMBER], MasterFundSch.P129NewInv = [Compl P129 A3C]!NEWINVNUMBER, MasterFundSch.P129NewCat = [Compl P129 A3C]!NEWCATNUMBER, MasterFundSch.P129PrinBal = [PRINBAL], MasterFundSch.P129PrinTran = [Compl P129 A3C]!PRINTRANS, MasterFundSch.P129Diff = [PRINBAL]-[PRINTRANS], MasterFundSch.P129RptDt = [Compl P129 A3C]!RPTDATE, MasterFundSch.P129ActionCd = [Compl P129 A3C]!ACTIONCODE, MasterFundSch.P129DueDt = [Compl P129 A3C]!DUEDATE, MasterFundSch.P129EffDt = [Compl P129 A3C]!EFFDATE, MasterFundSch.[REPUR SUB] = IIf([groupID]="FH",IIf(Month([fund dt])=Month(Now()),IIf(Day([fund Dt])<16,"N","C"),"C"),Null)
WHERE (((MasterFundSch.P129RptDt) Is Null) AND (([Compl P129 A3C].NEWINVNUMBER)=[MasterFundSch]![New Inv]) AND (([Compl P129 A3C].NEWCATNUMBER)=[MasterFundSch]![New Cat]) AND (([Compl P129 A3C].ACTIONCODE)="0000" Or ([Compl P129 A3C].ACTIONCODE)="0820" Or ([Compl P129 A3C].ACTIONCODE)="0077" Or ([Compl P129 A3C].ACTIONCODE)="0078"));
I'm getting records updating that are not one of the four Action Codes that I've assigned.
Help before I go crazy!
View 1 Replies
View Related
May 22, 2006
I have a text column of alpha-numeric fields and some start P123456, P111111, P222222 etc. I want to remove the P from these fields.
I thought the following update query would do this but gives a type conversion error, regardless if the new column to copy them to is type text or number. Can someone help explain what is wrong.
UPDATE 2006 SET D2 = CLng(RIGHT(D1,LEN(D1-1)))
WHERE LEFT(D1,1)="P";
Thanks,
Andy
View 2 Replies
View Related
Feb 20, 2008
Does anyone know why I get the error "Operation must use an updateable query" when I run this query.
UPDATE Food_Table SET Food_Table.Delivery_Size = (SELECT Delivery_Size
FROM Delivery_Table
WHERE ((Delivery_Table.Region=Forms.Formulation_Combo.Re gion_Combo) AND (Delivery_Table.SubRegion=Forms.Formulation_Combo. SubRegion_Combo) AND (Delivery_Table.Segment=Forms.Formulation_Combo.Se gment_Combo) AND (Delivery_Table.Sector=Forms.Formulation_Combo.Sec tor_Combo) AND (Delivery_Table.Product=Forms.Formulation_Combo.Pr oduct_Combo)));
When I run only the sub SELECT query portion all is well, but not in the update query.
View 14 Replies
View Related
Mar 31, 2006
I am trying to get some of my colleagues to open a database I have created. They keep getting an error message on some of my forms:
"The expression after update you entered as the event property setting produced the following error – can’t find project or library
Expression may not result in the name of a macro, the name of a user defined function, or event procedure
There may have been an error evaluating an event, function or macro."
What does this mean? I'm assuming it has osmething to do with the code I have in AfterUpdate events but these are only requerys for cascading combos. Example:
Private Sub cboBusiness_AfterUpdate()
Me.cboBusinessUnit.Requery
Me.cboBusinessUnit.SetFocus
End Sub
Where do I need to look to sort this? It works fine on my PC, but nobody elses.
View 1 Replies
View Related
Aug 24, 2005
Hi everyone,
I keep getting this error whenever i try to run the ASPcode. Can anyone please help me
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error in UPDATE statement.
I have two tables data1 and data2 in the same access database (data.mdb)
here is the query
strDBPath = Server.MapPath("data.mdb")
Set cnnSimple = Server.CreateObject("ADODB.Connection")
cnnSimple.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" & strDBPath & ";"
Set rstSimple = cnnSimple.Execute("SELECT sponser2 FROM data2")
Do While Not rstSimple.EOF
spo=rstSimple.Fields("sponser2").Value
set tamt = cnnsimple.Execute("SELECT SUM(amount1) FROM data1 WHERE sponser1='"&spo&"' ")
Set rstSimple1 = cnnSimple.Execute("UPDATE data2 SET amount2= "&tamt(0)&" WHERE sponser2='"&spo&"' ")
rstSimple.MoveNext
Loop
View 2 Replies
View Related
Aug 25, 2006
im trying to update to the database with the following sql statements:
FUNCTION fixQuotes( theString )
fixQuotes = REPLACE( theString, "'", "''" )
END FUNCTION
sql #1
sqlstring = "update Asset set AssetID='"&fixQuotes( assetid )&"', AssetLabel='"&fixQuotes( assetlabel )&"', WarrantStart='"&fixQuotes( warrantystart )&"', Engrave='"&fixQuotes( engrave )&"', Status='"&fixQuotes( status1 )&"', Make='"&fixQuotes( make )&"', Model='"&fixQuotes( model )&"', AssetCategory='"&fixQuotes( assetcategory )&"' where AssetID='"&assetid&"' "
sql #2
sqlstring = "update Asset set " &_
"AssetID=' " & fixQuotes( assetid ) & "'," &_
"AssetLabel=' " & fixQuotes( assetlabel ) & "'," &_
"WarrantStart=' " & fixQuotes( warrantystart ) & "'," &_
"Engrave=' " & fixQuotes( engrave ) & "'," &_
"Status=' " & fixQuotes( status1 ) & "'," &_
"Make=' " & fixQuotes( make ) & "'," &_
"Model=' " & fixQuotes( model ) & "'," &_
"AssetCategory=' " & fixQuotes( assetcategory ) & "' where " &_
"AssetID=" & AssetID
ive tried both @ different times but they dont work. the adodb connection's open
View 14 Replies
View Related
Nov 3, 2006
Obviously a common problem, but my code seems to fit all the correct syntax. I don't understand why it doesn't work...
Code:content_id = request.form("content_id")text = request.form("text")Set Conn = Server.CreateObject("ADODB.Connection")Set RS = Server.CreateObject("ADODB.Recordset")DSNName = "DRIVER=Microsoft Access Driver (*.mdb);DBQ="DSNName = DSNName & Server.MapPath("../../db/axis_content.mdb")Conn.Open DSNNamesql = " UPDATE content SET "sql = sql & " text='" & fcol(text, "a") & "'"sql = sql & " WHERE content_id= " & fcol(content_id, "n")function fcol(indata, typeofdata)indata = trim(indata)if len(indata) = 0 thenfcol = "Null"exit functionend ifselect case typeofdata'a is for words'case "a" fcol = "'" & tsq(indata) & "'"'n is for numbers'case "n" fcol = indata'd is for dates'case "d" fcol = "#" & indata & "#"end selectend function'tsq = two single quotes'function tsq(indata)'replace 1 single quote with 2 single quotes and pass back'tsq = replace(indata, "'", "''")end function
FYI: the content table contains a content_id, section, page, and text
I have been struggling with this for the past week (no joke). Thanks in advance for your help.
View 11 Replies
View Related
Nov 8, 2006
I am using this update querry..
UPDATE DISTINCTROW indicateur set libelle_court='% revues tenues / revues prévues sur projet', description='',cle_tri='',id_priodicite=1,calcule= '0',resitute='0',origine='',seuil_min=9,52,seuil_m ax=1 WHERE id=2;
This gives me an error...I found out that if I put 9,00 (this is the symbolic representation of 9.00 in French system) then it works fine. It does not take any thing after the decimal...
Can anyone please help rectify this..??
View 5 Replies
View Related
May 25, 2007
I am trying to update a hyperlink field with data of textfield of form.
\192.168.4.40h driveNTPC SIPATDMSSDocumentsP-159
but instead of this server path, it is giving
file:c/\192.168.4.40h driveNTPC SIPATDMSSDocumentsP-159
Please help
View 3 Replies
View Related
Apr 12, 2006
I have a database with 10 users accessing it.
Even though the database is in share mode they get this message "Error 3218 Could not update; currently locked." when they are trying to write a new record.
Any ideas how to fix the problem?
thank you in advace!
View 5 Replies
View Related
Dec 18, 2006
Out IT department updated to SP2 this weekend and about half of my reports are no longer working. I cannot view, print or go into design mode. The error I am receiving is this:
There was a problem retrieving printer information for this object. The object may have been sent to a printer that is unavailable.
As soon as I change my default printer to a different one everything works normally. After talking to our IT department I received the helpful reply:
"Not at this time . This would take a lot of research to see why some reports print vs this one that will not."
After about three minutes of checking all of the affected reports are pointing to one printer. I found a way to manually fix an individual report by opening it up with a new printer set as default, saving the report and then changing the default back to the original printer. The problem is volume, this appears to be affecting about 50 or so reports.
It seems like a driver or network issue, these are network printers, but I do no have the access rights to try and fix this.
Any thoughts?
View 2 Replies
View Related
Jan 17, 2008
Hi All,
I am running a access db within a company with about 40 users. I have split the db for multiple users. The only way I have found to fix this problem is to ask the user to close it and reopen it but this is just a quick fix.
Is this cause by our Microsoft servers or is it cause by access. Any help would be great :D
Here is the complet error msg
Could not update; currently locked by user "Admin" on machine 'XXXXXX'
please note that the user is not logged on as "Admin" but as normally user without admin rights.
Thanks in advance.
Chezney
View 3 Replies
View Related
Jul 18, 2006
Trying to create a query that will look up a barcode and subtract 1 from the currnet stock levels, i have the exact same sql statement for the adding of stock part from the -1 to a +1 the relised i may need a gap between the "-" and the 1 but it still comes up with the message. Anyone got an idea how i can make this work??
UPDATE table1 SET table1.quantity = "quantity - 1"
WHERE (((table1.barcode)=[Barcode please]));
Microsoft office access didn't update 1 field due to a type conversion failure, 0 record(s) due to key violation, 0 records due to lock violaation and 0 records due to validation rule violations
View 2 Replies
View Related
Jun 27, 2005
Hello,
Hopefully this is an easy one! but for the life of me i can't see what im doing wrong , help is appreciated.
Error Type:
Microsoft JET Database Engine (0x80040E14)
Syntax error in UPDATE statement.
/diary_editE.asp, line 272
SQL = "UPDATE diary SET dte =" & Request.Form("dte") & ", " &_
" eTime= '"& ChkStr(Request.Form("tim")) & "', " & _
" eEnd= '"& ChkStr(Request.Form("endt")) & "', " & _
" text_field = '" & ChkStr(Request.Form("title")) & "', " & _
" eLocation = '" & ChkStr(Request.Form("locat")) & "', " & _
" eContact = '" & ChkStr(Request.Form("conta")) & "', " & _
" eSpeak = '" & ChkStr(Request.Form("speak")) & "', " & _
" eAudiin = '" & ChkStr(Request.Form("audi")) & "', " & _
" eAudiex = '" & ChkStr(Request.Form("aude")) & "', " & _
" eVisitors = '" & ChkStr(Request.Form("evisit")) & "', " & _
" ePromo = '" & ChkStr(Request.Form("prom")) & "', " & _
" details = '" & ChkStr(Request.Form("details")) & "', category = " & Request.Form("cat") & _
" WHERE id = " & Request.Form("ID")
my_conn.Execute SQL
If anymore info is required please tell me, but basically i can insert into the database no problems , but when it comes to updating what is in there i recieve the above error
Thanks in advance
View 3 Replies
View Related
Jun 1, 2005
Hi everyone,
I'm trying to execute an update query by using the DoCmd.RunSQL. Here is my statement:
DoCmd.RunSQL "UPDATE T_Facturation SET TotalQuantiteDiesel = TotalQuantiteDiesel + " & Me.TxtQuantiteDiesel.Value & ", " & _
"TotalInst = TotalInst + " & Me.TxtInst.Value & ", TotalDemo = TotalDemo + " & Me.TxtDemo.Value & ", " & _
"TotalCoutDiesel = TotalCoutDiesel + " & Me.TxtCoutDiesel.Value & ", TotalLocationHQ = TotalLocationHQ + " & Me.TxtLocationHQ.Value & ", " & _
"TotalTempsHQ = TotalTempsHQ + " & Me.TxtTempHQ.Value & ", TotalLocation = TotalLocation + " & Me.TxtLocation.Value & ", " & _
"TotalTransfo = TotalTransfo + " & Me.TxtTransfo.Value & ", TotalAutreDep = TotalAutreDep + " & Me.TxtAutresDep.Value & ", " & _
"TotalCable = TotalCable + " & Me.TxtCable.Value & ", TotalElectricien = TotalElectricien + " & Me.TxtElectricien.Value & ", " & _
"TotalTempExt = TotalTempExt + " & Me.TxtTempsExt.Value & ", " & _
"TotalTransportGeneratrice = TotalTransportGeneratrice + " & Me.TxtTransportGeneratrice.Value & ", " & _
"TotalTransportTransfo = TotalTransportTransfo + " & Me.TxtTransportTransfo.Value & " WHERE NoAutoInstallation = '" & Me.TxtNoAutoInstallation.Value & "';"
My problem is that when I execute this code, I got the error:
Run-time error '3464': Data type mismatch in criteria expression.
I tried to change my query statement, but I cannot find my error. I'm using Access 2003. I'm really lost.
Can someone help me please!
Thanks a lot
View 2 Replies
View Related
Dec 15, 2004
Greetings all,
I'm an Access newb, so please be gentle!
Using Access XP, I have a number of unbound combo boxes I use as search tools to locate specific records. Here is the code for one of them:
Private Sub Combo40_AfterUpdate()
Me.JobNumber.SetFocus
If Not IsNull(Me.Combo40) Then
DoCmd.FindRecord Me.Combo40
End If
End Sub
I think I need to add something along the lines of:
Me.Combo40.SetFocus
Me.Combo40.Text = ""
To get it to clear the combo box after the FindRecord has executed. However, when I drop those 2 lines in either before or after the "End If", I get this:
"RunTime Error: 2115. The Macro or Function set to the BeforeUpdate Validation rule property for this field is preventing MS Access from saving the data in the field."
So, I hope this doesn't mean that you can't clear the combo box choice because it interferes with the FindRecord part of the code...Anyone know how to get the result I'm looking for? To define it clearly: I want the combo box selection area to clear the choice after the find record has succesfully completed. I don't want to clear the choices, just not show anything after a search completes.
Thanks in advance. I'm sure this one isn't that hard, but it is eluding me and I've only been doing access for about 3 months.
-Nick
View 3 Replies
View Related
Nov 16, 2006
I got a problem, I have a calculated field which is sometimes empty due to no information being put there. Here is what I have in the afterupdate code:
FUTURE DATE = Me.Box123
The Box123 is my textbox and the FUTURE DATE is the datasource field.
When the field is blank I get the following error message:
I get a Run-Time Error "2113";
and the message "The value you entered isn't valid for this field"
View 10 Replies
View Related
Jul 16, 2007
While executing this query, I get this error code:
Record is deleted.
UPDATE [MDL-10] SET [MDL-10].[File Path] = "Download#\192.168.4.40h driveNTPC SIPATDMSSDocuments" & [ProjectNo] & "" & [Client Drg No] & ".pdf#"
WHERE ((([MDL-10].[REV 00 SUBMISSION]) Is Not Null));
I tried all but could not find any reason. Please help
View 3 Replies
View Related
Nov 27, 2014
I have 2 tables called MakeTable1 and DBO_TBL_Activity
Im trying to update MakeTable1 with the values from TBL_Activity when both activity.StartDate and maketable1.Dates match but also acticity.IDStaff and Maketable1.ID Match
Below is the SQL i have so far
Code:
UPDATE [MakeTable1].[Detailsa] SET [dbo_tbl_activity].[details]
WHERE [MakeTable1.Dates)=[dbo_tbl_activity].[StartDate] AND [MakeTable1].[id]=[dbo_tbl_activity].[idstaff]);
The error is :syntax error in update statement
View 2 Replies
View Related
Aug 10, 2015
I'm trying to write an UPDATE line in VBA, but whenever I put the table name I get an "Expected End of Statement" error.This is line currently;
Code:
strSQL = UPDATE "MASTER PLANNER" SET [SET 2] = TRUE WHERE "[ID] = " & Me.PlannerID
It doesn't matter whether I change the table name to square brackets, quotes or nothing at all, it always gives me the expected end of statement error.
View 2 Replies
View Related
Apr 21, 2015
What is the syntax error in update query
DoCmd.RunSQL ("Update TblPaymentInfo set ([PaymentForVehicle]) = " & txtVehicleRouteCost.Value & " where ([BookingID]) = " & bookID & ";")
runtime error '3144'
View 3 Replies
View Related
Jun 2, 2014
I have a form which uses a list box to select which record to display. The code is all generated by Access during form design. It is a method I have used numerous times inthe past in various database without problem (even in the current database I am developing).But for some reason on this one form I get the following error;-
"The expression After Update you entered as the property setting produced the ollowing error; A problem occurred while database was communication with OLE Server or Active X Control".
View 2 Replies
View Related
Sep 19, 2012
I have a website which uses a series oif ASP/VBscript scripts to access and update an Access database. It has run for years on a shared commercial service.I also have a replica of the wesbite on my home pc for development and testing running under XP Pro and IIS. All works fine.
Recently I have had to switch my home setup to my laptop (also XP Pro and IIS). The scripts all appear to work ok except when I try to UPDATE certain tables.
Some give "Syntax error in UPDATE statement."
Some give "Data type mismatch in criteria expression."
Some work without error
Yet the identical script and table on the main site and my home PC work fine and have done for years.
View 14 Replies
View Related
