Error In Updating Record In Table
Jan 1, 2015
I have a separate button to update the record, but when I run or click the cmdUpdate button it gives me an error;
Code below is the one I'm working thru.
Private Sub cmdUpdate_Click()
strSQL1 = "UPDATE tblAMHMace " & _
" SET ReferenceNo=" & Me.txtReferenceNo & "'" & _
", DateLog='" & Me.txtDate & "'" & _
", DocType='" & Me.txtDocType & "'" & _
[Code] ......
View Replies
ADVERTISEMENT
May 11, 2005
I have an orders Form with a subform for products. In the subform the user selects each product by first selecting the product category from a combo box, which filters the query for the second combo where they selects the product. Once this is done, I need the record to up date, but Access gives a run time error 3058: Index or primary cannt contain a null value.
In this case I belive the key field is the product_id form my 'order_detail_table' where this is a shared key.
I've been beating this to death (it's killing me!!) for a couple of weeks now and got nowhere. Maybe someone out there can have a look and see what my obvious mistake is ... (I've attached a cut down version of db with just tables, query and subform)
Thx.
Kev
View 2 Replies
View Related
Aug 17, 2005
Hi, I've tried everything to get this to work with access. I can get it to work with SQL but unfortunately in this case I can't use SQL. Problem is that when I try and update the record, I get an error saying that the update method is not supported or that the lock is incorrect. It's a 3251 error.
Here's the code I'm using:
Dim dbConn2 As ADODB.Connection
Dim dbRst2 As ADODB.Recordset
Set dbConn2 = New ADODB.Connection
dbConn2.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source= R:myAccessDB.mdb"
Set dbRst2 = New ADODB.Recordset
dbRst2.CursorLocation = adUseClient
dbRst2.CursorType = adOpenDynamic
dbRst2.LockType = adLockOptimistic
Set dbRst2 = dbConn2.Execute("Select ROAD_ID FROM GIS_MSLINK_ROADID WHERE MSLINK" & " = " & UserForm2.slsn_textbox1.Value)
dbRst2.Fields("ROAD_ID").Value = UserForm2.slsn_textbox2.Value
dbRst2.Close
dbConn2.Close
Set dbRst2 = Nothing
Set dbConn2 = Nothing
View 9 Replies
View Related
Jun 19, 2005
Hi guys I am creating maintenance form to update and add new records to department table.
But when I try to edit department field in employee table.
(I get the following error.I get same when try to add new record.)
Error:
You cannot add or change a record becasue a related record is required in table department
http://i5.photobucket.com/albums/y1...gdepartment.jpg
==> pic of error errroupdatingdepartment
http://i5.photobucket.com/albums/y1...eletionship.jpg
===> timekeepingreletionship
I be happy if some expert help me how to update and add new record to department table successfully without the above error and without changing the db structure.
Thanks
View 2 Replies
View Related
Jun 16, 2014
I have a linked table to a DB2 database. this table contains key-pair values and has about 140k records.
I use a Sub to update the value of a specific record.
The sub starts by opening the needed DAO recordset
Then it uses the rs.Findfirst method
It checks if rs.Nomatch is not true (so the records exists!)
Then it starts updating the record with
rs.edit
rs!value1 = myvalue1,
rs!value2 = myvalue 2
rs.Update
There is where I get the '3021 No current record' error
I use the same sub on the same table to update to different parts. One part works the other gives me the error.
I have checked for typos.
View 5 Replies
View Related
Jun 24, 2015
I have a list (table) that I've created in sharepoint 2010.I link to the sharepoint table with Access 2010 to update mass amounts of items at once. Some of the queries have no problem updating the sharepoint items, but other queries require me to "Enter Paramater Value."
In this particular queries; I'm trying to populate field A with dates from field B, when field A is null.
---------------------
UPDATE Table 1 SET Table.[FieldA] = [FieldB]
WHERE (((Table 1.[FieldA]) Is Null));
--------------------
When I run the above, I receive the "Enter Parameter Value" input box.All records have Field B populated (it's actually the created date.)
The goal is for field A to be populated with the values in Field B, without the query asking for parameters.
Note; I can go in each individual record and update them via access, one at a time. But it's the running of the update query that failing.
Edit: Removed spaces in table and field names.
View 2 Replies
View Related
Mar 4, 2014
I am trying to edit an existing record in my database.It goes to the correct record to update but will not update if "RecordUpdate" is specified as auto numbered.If the "RecordUpdate" is just specified as a number in the query it is fine.
CurrentDb.Execute "UPDATE QryIssueData " & _
" SET RecordUpdate =" & Me.txtRecordNum & _
", IssueDate ='" & Me.txtIssueDate & "'" & _
", Equipment ='" & Me.cboEquipment & "'" & _
", IssueDocNumber ='" & Me.txtIssue & "'" & _
[code]....
View 3 Replies
View Related
Feb 20, 2015
Here are my tables
Question Table
ID
Question
AnswerID
CategoryID
Answer Table
ID
Answer
Category Table
ID
Category
So my form shows :
Question, Answer, Category
And I can display any existing question and make updates to the question and answer, that works fine. BUT, what I want to do is update which category a question is in. If I change the Category in the form, it updates the 'Category' in the Category table. What I want it to do is update the CategoryID in the question table.
View 2 Replies
View Related
May 16, 2015
I am having a problem updating a record on a table called BookInTable . The field I want to update is called Engineer and the record is found using the field Barcode. I have a form with 2 text boxes BarTxt and EngTxt as well as a button called SaveBtn. on the OnClick event of the SaveBtn I put the following code
Code:
Private Sub SaveBtn_Click()
If IsNull(Me![BarTxt]) Or (Me![BarTxt]) = "" Then
MsgBox "Please enter a value!", vbOKOnly, "Invalid Search Criterion!"
Me![BarTxt].SetFocus
Exit Sub
End If
DoCmd.RunSQL "Update BookInTable SET Engineer = " & Me!EngTxt & " WHERE BarCode ='" & Me![BarTxt] & "'"
End Sub
But this is bringing up the enter Parameter value dialog box for whatever I type into EngTxt. If I enter text into that box and then click okay it then updates to the record. how can I stop the from enter Parameter value dialog box appearing?
View 2 Replies
View Related
Dec 16, 2014
I have a form that has combo boxes and text fields (as well as sub forms). There is also a button linked to some code that says'
Private Sub cmdQuote_Click()
'Creates quote date and prints quote
Me.QuoteDate = Now()
Me.cbAgentID.Requery
DoCmd.OpenReport "Quote", acViewPreview, , "BookingID = " & Me.BookingID
End Sub
When the button is pressed the QuoteDate field (it is bound) should be be populated, but unfortunately it is not. I have played with refresh and requery but cannot derive a solution.
View 1 Replies
View Related
Mar 16, 2005
I have a corrupt record in a table that I am trying to delete. I keep getting the following error when I try and delete the record: "The search key was not found in any record".
Can anyone help me with this. All I am trying to do is delete this one record
Thanks!
View 1 Replies
View Related
Oct 13, 2013
I'm doing a TAFE assignment (I'm from Australia) and I have tried to populate a field in my subform called RestaurantID with data and it has given me the error'Cannot add record(s) join key table Restaurant not in recordset.
View 7 Replies
View Related
Sep 25, 2014
The below SQL is basically trying move a record from one table to another, the table a copies of one another and the AlphaName variable is a string.
I keep getting the incomplete query error, somethings missing but what.
Code:
strSQL = "INSERT INTO [Holding Table].* SELECT ([Import Table].* FROM [Import Table]
WHERE ([Import Table].[Alpha Name] = '" & AlphaName & "'));"
View 3 Replies
View Related
Sep 7, 2006
Hi,
I have a form with various fields, some of which are normal data entry fields, others dynamically updating combo boxes.
My first field is a date field which defaults to today's date, the field following this is a growing combo box which requires some narrative to be entered. I have set up this combo box so as when data is entered into the combo box, the combo box will store it, allowing that entry to be used again. I achieve this with the Got Focus property Me.Refresh.
An error occurs when the user wishes to change the date from the default to another date. When I tab to the narrative field, Access informs me that the error occurs with the Me.Refresh property of the narrative field. I want to keep this property to allow me to update the combo box entries but I can't keep allowing this error to occur.
Does anyone know how I could solve this problem/get around it?
Thanks
Turbojohn
View 11 Replies
View Related
Nov 28, 2005
Hi,
I have a table that uses SerialNo as primary key. From time to time (its a long story...) I need to go in and update the SerialNo by adding x to it. Here's the problem: lets say the table has SerialNo's 1,2,3,4,5, and I try to add 1. I get 4 KV error's because of course, 2,3,4,5 already exist in the table. (So I would end up with 1,2,3,4,6 instead of 2,3,4,5,6.)
I really thought that Access should be smart enough to figure out that there really won't be any key violations after the updates are done, but I guess not.
So, what's the easiest way to deal with this?
Thanks for any suggestions.
View 8 Replies
View Related
Jul 31, 2013
After run this command
DoCmd.RunSQL (" Update [Receipt_TB] SET [Receipt_TB].[Changed_by] = '" & UserIdP & "' WHERE [Receipt_TB].[Receipt_ID] = '" & Me.Receipt_ID & "' ;")
I see the following message:
"Data type mismatch in criteria expression"
Although all fields and parameter are integers...
View 5 Replies
View Related
Mar 8, 2006
Hello all,
I have 5 check boxes on a form and one of them must be checked in order to get the correct result.
If the user does not check any of the the five checkboxes he gets a msgbox telling him that he must checks one of the checkboxes.
What i want to ask is if is possible to prevent the form from updating? Because the user gets the error message but after that the form is being updated even though he hasn't check any of the fields.
Thank you in advance!
View 2 Replies
View Related
Feb 21, 2006
Greetings,
I have a form with a subform(sub1) that contains records. Also on the parent form is a subform that contains subtotals of the records on the (sub1) subform. When I add a record to the (sub1) form, I can't get the code to update on the subtotal subform unless I go to another record. what am I missing here?
Thanks!
O
View 3 Replies
View Related
Jun 26, 2006
Dear all,
Is there any way to update the same record from two forms? The requirement is that in a form I have a checkbox. If I select the checkbox, it will open another form, in which I can update some fields which are of the same record. When I tried, it is updating on another record. Is that possible to do so?
i am attaching a sample db . If anyone knows how to do it, please update the sample db or give me advice.
Thanks
View 1 Replies
View Related
Apr 25, 2005
I have one table (call it tblMax) which holds a number designating a maximum amount for items. I have a second table (call it tblItem) which holds the items current inventory, along with several other values about the item. Is there a way to reference fields from both of these tables on one form, AND have the record be able to update? I've used a query to bring them all to one form, but the record is not able to update using that method. The tblMax will be used for reference only, after the initial values are entered. I also tried leaving the form's Control Source blank and typing in Control Sources for each field, but was unable to get that to work. TIA.
View 1 Replies
View Related
Jan 26, 2006
Ok so ive built a form that a user can use to enter in data that will update a certain table.
The table has for fields: Email, Password, Active and ID.
In my form ive got rid of the active and ID fields as i want them to update automatically when the user fills in the email and password and hits the submit button on the form.
The only problem im having is getting my head around how i would update my other two fields once the user clicks submit?!
i was thinking that i could simply code the submit button to add the relevant info into the fields eg onclick active = 1 and ID = previous id +1 but im completely lost
Any help or ideas?
View 1 Replies
View Related
Aug 10, 2006
on my form i have a few radio buttons, check boxes, text fields and combo boxes. i am able to change and update all fields except combo boxes. it modifies the wrong table...
combo_table
------------
id value
1 house
2 school
3 work
if on my form the combo box for a specific record shows house selected, the value of 1 (the id from combo_table) should be the value put in the main talbe...if this is changed to option 2, school, the main table should have 2 in that field...
what happens though, is if i change from 1 (house) to 2 (school) combo_table ends up looking like the following:
combo_table
------------
id value
1 house
2 house
3 work
View 4 Replies
View Related
Dec 4, 2006
I am using and UPDATE Sql statement to update a firld in a form to a table. However, I get the message updating 140 records etc. How can I get the SQL/Macro to simply update teh record I am currently working on?
Beeky
View 1 Replies
View Related
Feb 2, 2012
I constructed a database in access 2007, when you entered a new record the autonumber would be generated once you started typing in values. I have since upgraded it to an SQL back end and now the autonumber does not update until the recordset is completely entered. This is causing me serious problems with my subforms since the record will not update before I need to go to the subform.
View 1 Replies
View Related
Apr 30, 2005
Hi
I have a database containing 3 tables (for now):
Customers
Orders
Catagories
Now i also have a form with customer information.
In that form is a listbox with a query statement, so that should display wich orders are placed by that customer.
SELECT Orders.[Order-ID], Orders.Description, Orders.Date, Orders.Category FROM Orders WHERE Customer=[Customer-ID];
Now this works for the first costumer record being displayed.
However when i view the next costumer, the listbox still displays the order information from the first customer.
How can i get the listbox to update itself when a diffirent record is viewed?
Thanks in advance
View 4 Replies
View Related
Feb 24, 2006
Hi all,
I have created a form to enter downtime information using the fields from downtime table (as follows)
tblDowntimes
fldDowntimeID (PK)
DateOccured
MaterialCode
ShiftID (FK)
LineMachineID (FK)
DTCategoryID (FK)
DTReasonID (FK)
However on the form, LineMachine is taken from the tblLineMachine where LineID and MachineID are FKs. This has a large list of machines as one line can have many machines and a machine may appear on more than one line
So on the form, i would like to select the LineMachineID by inserting fldLineID (which would be a combo box) where the user could select which line e.g. Line1 and then the combo box for the LineMachineID would only display the relevant machines for the entered line instead of all the machines for every line.
I managed to achieve this,but I am experiencing a problem where if, in the Line combo box, i choose a different Line e.g. Line2, the LineMachineID does not then display the machines on Line2, but keeps showing the machines for the line I originally selected (Line 1).
How do I get the LineMachineID combo box to update every time a different line is chosen in the LineID combo box?
Any assistance much appreciated!!
thanx all,
Keji
View 3 Replies
View Related