When I start my Access program I get this error and can't
seam to be able to get rid of it.
Security warning:
unsafe expressions are not blockked. Do you want to block unsafe expressions YES NO
When I select YES MS access cannot change the registry setting that controls whether or not unsafe expressions are block.
any suggestions
KMB
Hello,
I made an application in access 2007 wich runs perfectly on my computer.
But when I package it and distribute it to a user he gets the following error message on opening:
"A potential security concern has been identified
Warning: It is not possible to determine that this content came from a thrustworthy source. You should leave this content disabled unless the content provides critical functionalitiy and you trust the source.
Filepath C:/program ....../myapplication.accdr
this file might contain unsafe content that could harm your computer. Do you want to open this file or cancel the operation?"
I have set the security level for macros tot enable all.
I receive a message as follows
ODBC call failed
[IBM][iSeries Access ODBC Driver] SQL data type argument out of range (#30030)
what to do ??
I'm geting error messages when open my form.
The expression On Load you entered as the event property setting produced the following error: A problem occured while Microsoft Access was communicating with the OLE server or ActiveX Control.
Also same message but for on current.
Here's my code
Public Function WinName()
Me.username = GetWindowsUserName
End Function
Public Function Edit()
If Me!username = [tblpersonnel.username1] Then
AllowEdits = True
ElseIf Me.username = "martiscm" Then
AllowEdits = True
ElseIf Me.username = "larsong" Then
AllowEdits = True
Else: AllowEdits = False
End If
End Function
Also once I'm in the form, if I navigate to the next record I get the same message but it's for On click.
Help Gary
Does anyone have any suggestions on how to address the following error occurring on my Microsoft Access ’97 database?
Error message: “Out of Memory”
Any thoughts on why this error occurs or what can be done to prevent it.
Many thanks
Hi,
i seem to be geting this message ( attached ) everytime i load the form for the first time. once i click ok, i can the enter data into the field and save as normal. if i load the form and got to a different field, it seems to be ok and the mesaage does not come back but it is definately there when i first click in the same field.
i have checked the form properties, field properties and code but i cannot see anything.
what usually causes this?
the text is the right size
the form is not in design view
i cant seem to find if the field is read only but after the box, i can enter data so that should remove any read only issues.
its vv frustrating.
regs,
Nigel
Hi...can you help?
I have a multi-user MS Access97 database application. It is causing one of the users (and I have only once had the error message myself) the following error message:
"There isn't enough free memory to update the display. Close unneeded programs and try again."
This error message occurs when the user is doing data entry via the forms and navigating between forms in the database. The form, on which the error occurs becomes oversized and does not display all the information. The user is forced to shut down the database, re-open it, and then it works fine....but eventually the error re-occurs.
I found Microsoft's article 236977, but it applies to working with Forms in Access 2000. This problem is happening in Access 97, and none of the causes listed in the article apply.
Has anyone every come across this....and do you know of a solution?
Thanks,
BJS
Once in a while, the Access 2000 application on our server has this error below:
The database “network pathdatabasename.mdb” needs to be repaired or isn’t a database file. You or another user may have unexpected quit Microsoft Access while a Microsoft Access database was open. Do you want Microsoft Access to attempt to repair the database.
I tried to click the "OK" button to repair it, the first several times, it keeps saying that my computer name was using it so it could not been repair. I even re-boot my computer several times, still can not repair. The next day, I tried to repair it again, it ran about only two-fifth at the status bar, and the "Program Error...MS Access has generated errors and will be closed by Windows. You will need to restart your program. An error log is being created" keep popping up, so I could never repair the file.
Does anybody know WHY it happened and HOW to prevent it from needing to be repaired?
Thanks so much,
I am getting this error on a access 97 database that we have been using for years. the message just started popping. use are still able to access the database, yet this message will not got away.
this member of the replica set has expired because it hasn't been syncronized with another m ember of the replica set.
Hi all
I'm working in Access 2000 for the first time and all was well until I introduced a wizard-created Switchboard. I created the Order Entry database using the Access wizard and copied the Switchboard form and tables into my database.
Since then I keep getting the following message:
"Error accessing file. Network connection may have been lost."
I've Compacted and Repaired but still keep getting the message. Does anyone have any ideas what's going on?
tia
shay
please help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
View 4 Replies View Relatedplease help I am working with access database I have limited experience with access. I am unable to figure this particular problem. Microsoft access can't append all the records in the append Query microsoft access set 0 field to null set to convertion failure and didn't add 2 to records to the table due key violation 0 record due to key lock violation
View 1 Replies View RelatedI am trying to export from Access to Excel. I am relatively new to this process. I am receiving an error that I am not using a valid path. I have tried to recreate the former path without any luck.
What I had done was to delete some old information that was making the former Excel sheet too large and create a more up to date database. I had to reformat the spreadsheet and export the new information to excel but when I pull it in it will not pull into the shared network drive without giving me the error message.
I have created a Asset database using MS Access 2010 & the same was published in SharePoint portal. Post publishing, all the "Query & Forms" are working as excepted but the "Reports" are not working.
The "Reports" is designed with "Group & Sort" option. Post grouping am able to see the "=Sum([Expression])" (i.e. Sum of the Value) value in MS Access Locally but not in SharePoint. Once i published in SharePoint, am getting "#Error" message for all the below expression wherever i have used in my reports design.
Expression Used:
Below expressions are works fine locally & getting #Error in SharePoint.
1. =Sum()
2. ="Page " & [Page] & " of " & [Pages]
3. =Now()
4. =Date()
Not being a code person. This code worked great for 2003, but we just installed 2007. I get an error message when the this code runs:
Its a complie error
User-defined type not found
Sub ShowUserRosterMultipleUsers()
Dim cn As New ADODB.Connection.....red shows where I get the error message
Dim rs As New ADODB.Recordset
Dim i, j As Long
Set cn = CurrentProject.Connection
' The user roster is exposed as a provider-specific schema rowset
' in the Jet 4.0 OLE DB provider. You have to use a GUID to
' reference the schema, as provider-specific schemas are not
' listed in ADO's type library for schema rowsets
Set rs = cn.OpenSchema(adSchemaProviderSpecific, _
, "{947bb102-5d43-11d1-bdbf-00c04fb92675}")
'Output the list of all users in the current database.
Debug.Print rs.Fields(0).Name, "", rs.Fields(1).Name, _
"", rs.Fields(2).Name, rs.Fields(3).Name
While Not rs.EOF
Debug.Print rs.Fields(0), rs.Fields(1), _
rs.Fields(2), rs.Fields(3)
rs.MoveNext
Wend
End Sub
When you start access it usually starts at the beginning of the file. How can I make it start at the last entry?
View 1 Replies View RelatedHas anyone had this problem: You make an access mdb database "X" with table "A"- which includes autonumber field and few more fields (text or something else). Than You make another mdb file "Y"- which contains link to table "A" in mdb file "X". When You open mdb file "Y" and You open linked table - You can not see data from the table - instead it showes "Autonumber" (text) in every field (autonumber field and other text fields). Then You close the linked table and open it again and everythnig is ok. And every time it shows this error on first opening.
On another computer (with the same windows instalation) everything is ok.
I tryed to reinstall windows (on the machine with the error) - clean install - and the problem is fixed. Another time I install the same windows again - and the error is back. Then I reinstall the windows again (clean install) - and this time error is still present. I tryed to install another access (2003 instead XP) - but it doesn't help.
What is going on ?
Thanks
Does anybody know what this error message refers to?
"Reserved Error (-1517); there is no message for this error."
It just started happening today, and I haven't even made any changes to the database. It occurs when I hit a button I have to run a macro.
the macro does the following:
1) Shows all records
2) Requery
3) ApplyFilter.
The Where Condition for the filter is:
Right([tblContracts].[JobNum],4)=Right([Forms]![FrmContProc].[txtFindJobNum],4)
The weird thing is that it only occurs if the Form window is taller than 1/2 of my viewable area. If the Form window is 1/2 the viewable area or shorter, it works OK. This was running fine earlier today, but about 4:00 pm (03/31/06) this started happening.
If anybody knows what this error means, or how to get rid of it (I really need to use this window in full-screen) then please let me know.
-Thanks, Sean
Im just starting to use access for a small business. Im fluent in visual basic but i cannot seem to get this to work. so im using the wizard for the "Order Entry" and it works great. However, on the Preview Invoice where you can also print it, i would like it to include the credit card number, payment method, experiation date, ect. which all can be found on the payment form for the order. I have a text box but i cannot seem to get the write content source. what would be the content source so it can access the payment details from the other form and print it along with the invoice.
View 1 Replies View RelatedHello All,
I have been developing my database all one seems to be well exept for an error message which is attched.
If anybody can help me trap this error or offer some advice i would be greatfull.
Alastair
Hello all
Well, I've created a help file using an authoring tool to make chm. files. I've put the path name in the "Help file" property and I've put the Help ID there as well.
When I press F1 in form view I get the message "Error starting ms Help". I've had a look for this error on the net and can't find anything that's relevant to Access.
The path I put in is:
C:Documents and SettingspwatsonMy DocumentsHelpFolderDatabase Help.chm
Does anyone know if this is right? Am I missing something?
thanks
how to generate a Report through "Form".I should be able to input the date ex: text box1= Start Date and text box2 should be End Date, by Clicking a button ...i.e Generate Report Button, a report should generate should be generated showing data in between the Start Date and End Date.
View 3 Replies View RelatedWhile going to the design mode of a form, I regularely get the following message :
Microsoft Access can't run the macro or callback function 'fDesign'.
In my Dbase there is no macro with that name.
Can anyone tell me what this messages means and how to get rid of this thing.
Running Win XP, Access 2003 Sp1
I have attached a screen print of an error message I recieved on my access database. I finally got it to come up, but only after a few pop up boxes with this error message.
I do know the shared drive it is housed on went on the fritz. So I copied it and pasted it to my desk top. Grrr...I thought this message was due to the flipping shared drive. But now, I recieved it on my desk top too.
Anywho...can someone look at it and tell me what it means.
Thanks alot.
PS, i know my desktop has to much stuff, so don't go there. ;)
Hi can anyone help i keep clicking on a qry and it comes up with this message "Syntax error (missing operator) in query expression 'tblSTSLimits.Max Short'. but Max Short is correct can anyone help
View 1 Replies View RelatedHi all,
I face a problem while openning a form.
It gave me this error message:
The expression On Load you entered as the event property setting produced the foolowing error:
User-defined type not defined.
What to do?
Sorry for bothering you.
Thanks & Regards
Mark K.