Event On Parent Form After The Subform Loads?
Jan 7, 2013
I have parent form and child subform. one field in the parentform is calculated on sum of records on the childsubform when the parent form loads initially the value in the calculatedfield is 0 then it shows the correct value when the childsubform value is populated i have another-field i want to change the property of the onotherfield.backcolor= RGB(0,0,255) when calculatedfield.value<0 but its taking the initial value(0) not the calculated onewhich event shall i invoke on the form so that it waits the subform to complete then fires ... i tried current, load, activate events .. with no success.
View Replies
ADVERTISEMENT
Jan 26, 2006
Hi,
I've got a parent/sub-form set up, both of which derive their data from linked tables connecting to a central database. As a result I've had to add coding to the NewRecord events to fetch the next primary keys from the database.
Unfortunately I'm finding that one loading the new record, the child form seems to be loading before the parent, ie the child form_Current event occurs before the parent form_Current event. Is this how it should be? It seems intuitive that the parent should load first.
I'm sure I can develop some cunning logic to get around this problem but I'm sure there must be a better way. Has anyone any experience of this parent/child set-up with linked, central database tables?
thanks!
Dave
View 5 Replies
View Related
Jun 20, 2013
I have a listbox on a subform (or a subform within a subform).
When it is clicked I want all other listboxes to unselect.
There may be listboxes on the mainform, on other subforms, on other subforms of subforms.
I imagine I'm looking at a recursive function of some sort, but I'm not entirely sure of syntax to identify parent and children forms...
pseudocode so far:
loop all controls
if control = listbox, unselect all
if control = subform - recurse: loop all subform controls
if control = parent... err... Fail.
View 3 Replies
View Related
Jun 19, 2006
I did a search in the form forum and couldn't find anything close that had a response.
I have a parent form and a sub form.
I have the parent set up to make the enable property false for the command buttons that aren't appropriate when you first open the form: Like Save and Undo.
I want to do the same for the child form, which has different data linked to the parent form.
The parent form always grays out the inappropriate boxes.
The subform will gray them out only if I open it as a stand-alone form. When I put the code in the Open, or Load or Gotfocus events I get an error message that it cannot locate the subform.
Any ideas where to go?
Thanks-
View 2 Replies
View Related
Sep 22, 2013
How do I make a column invisible in my subform when the main form loads?
View 3 Replies
View Related
Sep 17, 2005
Hi,
Scenario:
Parent form: An order form (Order table) with data fields like Order ID and etc. In my Order Table, I have a revenue data field, which is a calculated field based on numbers of items in its subform (OrderDetails table).
Since the profit data field is based on the items of the Order Details, for each time the user add an records in the OrderDetails table, it need to be recalculated. Currently, I used a calculated field in the query of the OrderDetails subform and bind it back to the main form, again it bind it back to the profit data field in the Order table.
With this method, everytime user add a record in the subform, the calculated field in the query will reflect the changes accordingly, but I have difficulty to force the changes in the calculated field to update the profit data field in the Order Table. I most of the events (like On Changes, On Dirty ....) on both parent and subforms, it seems does detect the changes.
Please help ...
View 2 Replies
View Related
Jun 27, 2012
I added a text box on my main form. I have to other parent names in a subform that I would like to add to my main form. I have this working just using one parent name "dtdrec" that is working. How would I add "flduser" and "fldstuff".
=[tblPayEstimates Subform].[Form]![dtdrec]
View 7 Replies
View Related
Nov 19, 2014
I have a parent form where I enter a value for tax rate. I need to use this value in the tax calculation in the subform fields i.e. subform.taxdue = subform.qty * subform.price * parent.taxrate.
I can get the value into the field. But I do not think I am putting it in the correct event. The parent form is a sales form and the subform is the sales items form. So there can be multiple items on the sub form.
View 5 Replies
View Related
Jan 10, 2014
In the detail of the parent form, there is a tab control block and each has subforms on them that are exactly alike for WorkOrder Notes, History, Specs When the Work Order subform is accessed (connected by SerialNumber, WorkOrderID and CertDate) the default WorkOrderID should default from the parent form, the SerialNumber should default from the parent form, and the CertDate should also default from the parent form.
What is the syntax to get these fields to default to the values parent form BUT not specifically referencing the name of the parent (because there are 5 differnt parent forms)?
View 6 Replies
View Related
Mar 30, 2015
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
View 12 Replies
View Related
Jun 11, 2013
I am updating an existing database and I have a parent/child form and I want to filter the subform for the current parent form record? The two forms are linked together by woWorkOrderID/deWorkOrderID.
View 1 Replies
View Related
Dec 10, 2013
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform:
Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Obviously I've done this wrong.
View 1 Replies
View Related
Jul 17, 2013
I have a form with a subform in a navigation menu. Something like:
Navigation Form
NavigationSubform
ParentForm (header data and some unbound calculation fields)
Subform (Multiple lines tied to query)
I have some fields in the ParentForm (i.e PF1, PF2) that would effect the values on the Subform (i.e. SF1, SF2). Also, there are some user editable values on the subform that will calculate the remaining fields on the subform (still using data from parentform).
My calculations work fine for the changes made on the subform. However I need to be able to calculate all the children lines on the subform when the form loads or a change is made to certain fields on the parentform. My On_Current event only wants to recalculate the first line.
Parent Form
PF1=10
PF2=3
Subform QTY ADJ SF1 SF2
Line 1 5 .05 10.6 112.89
Line 2 8 .14 10.38 105.15
...
Line N
SF1=PF1+(PF2/QTY)
SF2=SF1*(SF1+ADJ)
So if PF1 or PF2 were changed then all the lines is subform would recalc SF1 and SF2. If changes were made to QTY or ADJ, then that line would recalc SF1 and SF2.
View 3 Replies
View Related
Dec 6, 2013
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
View 3 Replies
View Related
Mar 1, 2015
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
View 5 Replies
View Related
Apr 30, 2015
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
View 6 Replies
View Related
Jul 23, 2015
I have a parent form which has a yes/no checkbox in the form's record source. Then in that parent form I have a sub-form. If NO records exist in the sub-form I want the checkbox to be UN checked. If records DO exist in the sub-form, I want the checkbox to be CHECKED.
But I want this to happen as records are added or deleted from the sub-form. In other words, if the parent form is opened and no records exist in the subform then the checkbox should be unchecked. But as soon as the first record has been entered in the subform, the checkbox on the parent form should be checked. Likewise, as soon as the last record has been revoved from the sub-form, the checkbox on the parent form should be unchecked.
What code do I need to accomplish all of this?
View 1 Replies
View Related
Sep 20, 2005
I have a form with a query's subform when the form loads appears some junk records. I want to load the form with the subform blank.
View 1 Replies
View Related
Jun 18, 2013
I have a main form (Parent) along with a subform(Children). I want to have a button that generates a report with the Parent information as a header and the items in the subform as details. In addition, I want the report to show only the children that were recently added not all of the children.
View 1 Replies
View Related
Jan 26, 2014
I have two subforms on a main form. Both use similar queries and nearly the same set of records and PK. The first subform is for data entry and the 2nd subform is a continuous form that lists the entries in order that are made from the 1st Subform. (for entering in vacation days and appointments)
The continuous form cannot be edited, it is to be a list for viewing the information only.
I have an edit button next to each record on the continuous form. When the button is clicked, I want it to take the 1st subform to that specific record as well (same PK), so the information can be edited there.
I cannot figure out how to get the 1st subform to go to the record on the continuous form when the button next to that record is clicked on the continuous form.
I tried the DoCmdSearch for record and just keep getting object is not open errors.
View 2 Replies
View Related
May 24, 2014
I have a form and a subform in it. I added New cancel button in the form so that the the user can cancel the record creation and no record will be inserted in the parent table.
But when details are entered in the subform (a datasheet) row records will be created in the subform table. what is the correct method or how to cancel these records if the user choose to click cancel button on the parent form.
View 5 Replies
View Related
Sep 27, 2006
I have a main form with a subform. I need to update values in the subform when a field on the main form is updated using afterupdate on that control.
Example:
main form name: mainform
control name: gst (on main form)
subform name: subform
records displayed as datasheet.
records field to update: retail
In main form gst control afterupdate event:
Me.[subform].[Form].retail_afterUpdate
Hoping to call the afterUpdate procedure on the retail field.
Error message:
Method or data member not found.
View 2 Replies
View Related
Jan 18, 2006
On clicking a button to open a form I want to filter a list in a combo Box located on the forms subform
The main form is called 'Frm_orders'
The sub form is called 'sub'
The combo box field is called 'CostCodeID'
and I want to filter column 0 of the combobox which is Tbl_InvoiceCostCodes.Type to show records with a type of 'Repairs'
View 2 Replies
View Related
Oct 24, 2004
This may be a really simple problem but it has me stumped. Working in Access 2002, I have a form with a subform (continuous). When the user clicks on a textbox in the subform, I need to capture the value and pass it to the main form so that it can be used to create a filter for yet another subform (not nested) on the main form. How could I accomplish this? Thank you in advance!
View 3 Replies
View Related
Oct 12, 2005
I currently have a subform that changes the image that is displayed when I click a button using
[student_picture].Picture = [student_image]
Is there anyway I could also update the image on a parent form, from the subform, something like
[ParentName.ImageNameOnParent].Picture = [student_image]
Thank You
Neil
View 5 Replies
View Related
Aug 2, 2013
I am working with 2 forms and a subform.
frmTaskTracker -subfrmInbox (Datasheet View - based on a query)
frmUpdateInboxItem
subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.
I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.
correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.
Code:
Option Compare Database
Private Sub cmdClose_Click()
Me.[frmTasktracker]![subfrmInbox].Requery
DoCmd.Close acForm, "frmUpdateInboxItem"
End Sub
View 5 Replies
View Related
