I am building a query with a column of data, 'location number'.
I need to exclude any data where the location number is found in a pre-built table.
i.e. return all data except when the location number is found in the table.
I am getting method of data member not found for the following code when inserting values to a table. Form has three frames. Add/Insert is on OnClick Event.
MsgBox "First Value, " & Me.txt_FSNo
CurrentDb.Execute "INSERT INTO BackchargeLog (BC_FSNo, BC_FContract, BC_FPurchaseOrder, BC_FProjectArea, " & _
" BC_FTitle, BC_FDetailDescription, BC_FSupplierToBeCharged, BC_FSupToBeChargedNumber, BC_FSTBCContactName, BC_FSTBCContactNumber, " & _
" BC_FSTBCContactEmail, BC_FIncidentReportedDate, BC_FInitiatedDate, BC_FEstimateAvailable,
[Code] .....
Could someone please help me? I am trying to run a query in which I would like to exclude a particular person's name from the query. For example, I am entering productivity information for each employee and manager each day, however, I only want the employee information to appear in the reports each day. Is there anyway of excluding a name from a query?
Thanks:)
Hello, I'm new to the forum and relatively new to Access. There's something I'm trying to do but I'm not sure if it's even possible so I'm hoping someone can help me out and point me in the right direction
the situation:
I have one very big table containing data for around 250 petrol stations. The data is collected monthly, so each site has a record relating to each month. E.g site A has data for month 1, 2, 3 etc.
The problem is that in any month, some of this data needs to be excluded from analysis. And this will vary over the months. What I want to do is run a query where specific records are excluded, for example, exclude Site A data for month 1 and 3, Site B data for month 2 etc.
I have another table containing a list of which site + month data is bad and to be excluded. Ideally I want to simply add to the list each month before I run the select query.
the question:
Is there any way to exclude records from a select query based on their details appearing on another table?
help would be much appreciated!
thanks
Catherine
I have one table that will consists of about 1,000 rows. I have another table that consists of product codes that we want to exclude from the report. I know how to include the two tables by joining, but I want to EXCLUDE the 2nd table of product codes. Basically, if any of the product codes listed on table 2 are on table 1, I don't want them to appear. So how can I do an exclude function in a query?
View 3 Replies View RelatedI have a search form with 12 fields. In my query I use
Code:
Like "*" & [Forms]![CustomerRetestDatabaseSearch]![RetestLocation] & "*" Or Is Null
for each field on the search form.
I get the results I expect, it finds all records that match the criteria. Even if some of the fields in a record are null.
But if the query finds a record that matches one field I enter criteria into, and nulls for the other fields I enter criteria into it displays the record. I want to show exact matches. (If what I entered is null... don't show the record).
The reason I have "Or Is Null" is to include the records for the fields I left blank on the form.
Search Form with Criteria.PNG
Search Query.jpg
Search Results With Missing Entered Criteria(Dont Want These Records Included).jpg
Hello,
I have 2 tables.
1) Table A, which is a table of all 100,000 users
2) Table B, which is a table of all other users
I have a query qryA, which looks for everyone in table A with a certain type of job title.
I want to exclude anyone who works for a company that occurs in the table B from showing up in the qryA query.
Any ideas?
Hi All,
Say you've got 2 tables and you want to extract data from table 1 but exclude all records from table 1 which have a field value existing in table 2?
Table 1 fields:
Test_Code
Test_Desc
Table 2 fields:
Test_Code
Therefore, I would like to query out from Table 1 all Test_Code values which do not exist in Table 2. Any ideas please?
I created a report where is lists sales volume by day. I was asked to create a table where data can be excluded from this report. The exclusion table consists of only three fields:
Date Department and a check box
What do I need to do in the query to have it exclude the data listed in this exclusion table. The table only holds data we want excluded, not all dates and departments.
I originally added the table to the source query and made the criteria "False" for the check box but when the query runs it does return any data at all.
Please help!
Hi
I have a table that I am importing from FOXPRO DATABASE. When someone goes into the system and deletes a record, Foxpro does not really delete the records but marks it for deletion. There is no field to query on that I can see in the table, but when I go to Foxpro the record is "marked" for deletion.
Anyway to exclude these records when doing a query or importing the table?
Thanks
I want to run a query on a table that holds all speed information for our trucks imported from a third party. Some of the speed alerts in that table are not correct so we set up a second table managed by the users to enter a speed exception. So if we know that Main St in Dallas TX generates false alerts for speeding we know not to call the driver, the third party db speed limit is not up to date.
So I want my query to pull all the speed data from tblSpeedData, except leave out the records where the street and zip are listed in the tblSpeedExceptions.
I am trying to write a query that will check all records in a table but exclude the 10 newest records in the table.
The table is from a stock program i have wrote for the company i work for (i am a novice access user). what ive been asked to do is write a duplicate order system that will flag up if the order has already been packed.
the table logs the [OrderID] with each item [barcode] scanned out with a barcode scanner what i want is a query that checks the OrderID for a duplicate entry in the entire table but because the OrderID is entered with every item scanned i want to ommit the last 10 records as prety much no order has more than 10 items i understand this may not be 100% fool proof but it is close enough.
The other option is to have it ommit all records within the last 15 minutes there is also a [Time] and [PackDate] Field which im guessing could be used for this the time field records Now() and the PackDate records Date(). After searching the web i cant seem to find anyway to ommit the last 'n' records and the few things i have found with the Date("m",-15,Date()) doesnt seem to work
Hoping someone can help me with this DELETE query. I have a Main table that's being updated by a Temp table that's an exact copy of the Main table but with a subset of records.
1) Insert records from Temp table NOT found in the Main table - this query I have worked out below - not tested, but the results look correct.
Need Help Here...
2) Delete Records from the Main that are not found in Temp table with an exception...only DELETE records where certain key fields are matching. i.e. If S.CAD_NAME, lngStoreNumber are a match to what's in the Main table. While
Temp table:
lngStoreNumber - CAD_NAME - lngcomponentSerial
1 - "CHK" - a
1 - "STK" - a
2 - "CHK" - a
Main table
lngStoreNumber - CAD_NAME - lngcomponentSerial
1 - "CHK" - a - LEAVE (EXISTS In Both Tables)
1 - "CHK" - b - DELETE (lngStoreNumber & CAD_NAME composite Found /lngcomponentSerial NOT Found in Temp)
1 - "STK" - a - LEAVE (EXISTS In Both Tables)
1 - "RMM" - a - LEAVE (lngStoreNumber & CAD_NAME NOT Found in Temp)
2 - "STK" - a - LEAVE (lngStoreNumber & CAD_NAME NOT Found in Temp)
2 - "CHK" - b - DELETE (lngStoreNumber & CAD_NAME composite Found/lngcomponentSerial NOT Found in Temp)
3 - "CHK" - a - LEAVE (lngStoreNumber = 3 Not in Temp table Subset)
Rule: Only delete the records for a particular CAD_NAME and lngStoreNumber from the Main table leaving all other CAD_NAME/lngStoreNumbers.
I'm running these updates in batches of lngStoreNumber. So the Temp table will only contain subsets of what's to be deleted from the Main table thus the need to link on the key fields only NOT to delete a Subset of lngStoreNumber/CAD_NAME. I think I've tried every possible query that doesn't work.
Here is query #1 to insert records missing from the Main table that exist in the Temp table. I think what I need is a variation of this???
SELECT D.*
FROM Main AS S RIGHT JOIN Temp AS D ON (S.CAD_NAME=D.CAD_NAME) AND (S.lngcomponentSerial=D.lngcomponentSerial) AND (S.lngStoreNumber=D.lngStoreNumber)
WHERE S.lngcomponentSerial is null AND S.CAD_NAME is null AND S.lngStoreNumber is null;
THANKS.
I have a macro in the On No Data event of a report that displays a message when the item number a user requests does not exist in the table being queried.
Now I need to get the same functionality in a form. The form is based on a parameter query with only one criteria [Please enter item number]. The form opens in Edit mode when a valid item number is entered.
I see that there is no On No Data event for either forms or queries, so I'm stumped on how to proceed.
Any and all assistance is appreciated.
Hi,
Trying to run a template on a new computer.. it works on other computers, but in this case it gives me this compile error.. kind of strange.
It comes up here-
End With
Selection.PasteAndFormat (wdPasteDefault)
Selection.MoveUp Unit:=wdParagraph, Count:=1, Extend:=wdExtend
(.PasteAndFormat) gets highlighted... I'm not that computer savvy... please help!!
Thanks heaps
Ross
i have the following code in a function but when i want to compile it i have the following code will be blue i have error in this line:
.NamedParameters = True
the error message is this :
method or data member not found
my code is as following:
Function Get_Bearbeiter_Detail(ByVal vBearbeiter_Code As String, Optional ByRef vBearbeiter_Name As String, Optional ByRef vReadOnly_Flag As Boolean, Optional ByRef vAnalyser_Flag As Boolean, Optional ByRef vAdmin_Flag As Boolean) As Boolean
On Error GoTo Err
DoCmd.Hourglass True
Dim rst As ADODB.Recordset
[code].....
i recieved error on the following connection string in the combo box change event code as follows,
Private Sub LotNo_Change()
Dim conn As New ADODB.Connection
Dim sConnString As String
[Code]....
I am receiving the Method or data member not found error message when I attempt to add a new record in form view. I have been working in an old 2002-2003 version of Access until last week when it was converted to 2007. The old version allowed for additions just fine but now after the conversion something is wrong. The code is below. I underlined the line throwing the error message (FindFirst). Code is not my strong suit.
'Open form to new record
gstrCallingForm = Me.Name
strDocName = "frmNewApplicant"
[Code].....
I'm a newbie trying to upgrade a 2003 database to 2010. When I compile this database an error pops up saying "Method or data member not found". This is the code below:
Private Sub CBPrintReq_Click()
On Error GoTo SendPrintError
Dim NewID As String, Notice As String, Temp
Dim CRLF As String * 3
CRLF = Chr$(10) + Chr$(13)
Notice = ""
[Code] ....
Hi all, I’m trying to filter the records a subform shows based on the employee number (in a combo box) that the user selects in the main form. At the moment im getting the following message when I select an employee number in the combo box: “Compile error, method or data member not found”:confused:
Ive searched the forums on here and tried to make use of the information other people have posted but im still having trouble getting this to work
Below is the code I have on the combo box of the main form:
Private Sub Cbo_Emp_Filter_AfterUpdate()
Dim strSQl As String
strSQl = " Select * from DATA-EMPLOYEE_MASTER where DATA-EMPLOYEE_MASTER.EMPLOYEE_NUMBER=" & Form![SCREEN-ABSENCE_TRACKING_MAIN]![EMPLOYEE_NUMBER]
Me.SUBFORM_ABSENCE_TRACKING.RecordSource = strSQl
Me.SUBFORM_ABSENCE_TRACKING.Requery
End Sub
Ive also posted the database if any one is willing to have a look for me (ive removed irrelevant tables/forms/reports). Im using access 97
Thanks
Jim
I have a search query that searches for different results based on 3 criterior. I have set up a form so that the user can input the text into the form and then once the Submit button (that i created) is clicked the query table will be shown.
My question is:
Is it possible to have an error message box appear when i click submit and no data is returned by the search query?
I'm hoping for the message box to say "No corresponding records to your search criteria. Do you want to try again?"
Then the options given in the message box are Yes (where they should be taken back to the search form) and No (Where they are taken to another form).
Error: Compile error: Method or data member not found when create Update button
View 7 Replies View RelatedCompile error: Method or data member not found
Code:
Option Compare Database
Option Explicit
Dim intItems As Integer
Dim strName() As String, datBirthDate() As Date, intAge() As Integer
Private Sub Form_Load()
intItems = Val(InputBox("How many names do you have?", "Name List"))
[Code] .....
I am setting up a database to hold staff details, and would like a query to show each member of staff's total hours and FTE.
Staff name etc is in tblStaff
Staff shift details are in tblShifts linked via staffID
tblShifts will contain details of the shift worked on each day of the week, but the majority of our staff work a standard shift - e.g 8-4, 9-5. Therefore what I wanted to do was in tblStaff set a field named shiftPattern to 1 2 3 or 4. 1 indicating a custom shift, and any other number indicating a set shift defined in a separate table.
The problem I have is that my query only returns people who have details in tblShifts - regardless of their shiftPattern value. If I enter a blank record in tblShifts it will do the above as intended.
I have a form (frmTimecardsDataEntry3*) that needs to requery combo boxes to narrow down the selections offered in the dropdown of each combo box.
It is a data entry form. I.e. Dataentry is set to yes.
The ClientName combo box has an after update event which requeries the matter combo box, so that the MatterName combo box dropdown only shows the matters relating to that client. This works just fine.
The MatterName combo box has an after update event which requeries the Rate combo box so that in the Rate combo box dropdown only the hourly charge rates relating to that matter are shown. That works too. So far so good.
I then tried adding another after update event to the MatterName combo box, so that another combo box, Application, was requeried too, so with the Private Sub it looked like:
Rate.Requery
Application.Requery
But this resulted in the error in the title to this post and the debugger highlighted in red the word Requery in the phrase Application.Requery.
I thought maybe Access does not allow two requeries resulting from one after update event, so instead I took Application.Requery out and placed it as an after update event in another combo box which did not have any other after update events to run.
However, this resulted in the same error.So the error appears to have something to do with trying to requery the Application combo box but I cannot see what is causing the error.
The Application combo box SQL is:
SELECT Applications.ApplicationID, [ApplicationDate] & " " & [ApplicationName] AS ApplicationDisplay, Applications.ApplicationDate, Applications.ApplicationName, Applications.MatterName
FROM Applications
WHERE (((Applications.MatterName)=[Forms]![frmTimecardsDataEntry3*]![MatterName]))
ORDER BY Applications.ApplicationDate, Applications.ApplicationName;
This is the same arrangement of SQL that I am using on the other requeried combo boxes that work. When I take the WHERE statement out of the Application SQL and run it the query returns all of the applications.
I am not sure what the error code is trying to tell me about the attempt to requery the Application combo box.
I have a yes/no box in the form and when the firm is first opened it has a small square dot in it, but as soon as any data is entered in the form the dot clears and leaves the usual empty tick box that you would expect to see.
Also, another possible symptom is that I had another version of this form previously working quite well except that when I did several data entries all at once, so I had several forms filled in with different data (before refreshing and thus entering the data in the table), when I scrolled between the forms I kept losing the MatterName data when I scrolled back, and then when I re-entered the ClientName data the correct MatterName data returned without me having to use the dropdown to select it.
I have had an earlier simpler version of this form working for some time, with ClientName requerying MatterName and MatterName requerying Rate, and I am using the same SQL structures in the new form but getting the error in the title to this post and the other isues just described.
I have a table with 715K records. Each record is an inventory product, and the sixth field of each record is a short description. The tenth field is a single-letter category designation, and is currently blank. What I want to do is search through the description field of every line, and where the word "Paint" is contained, enter a letter "P" in the category field.
View 2 Replies View Related