Hi, I am a beginner in access. I am trying to execute the below query through VBA on a click event on a Command Button in a Form. I am taking input parameter from Form, based on which I want the query result( dynamic Query Parameter).
I getting the attached error message
Please help me out in executing this query in VBA. An example would be of great help. Thanks in advance..
Hi there,
I am trying to run a query from an ASP page, which also uses other queries. I get the following error message: [Microsoft][ODBC Microsoft Access Driver] You tried to execute a query that does not include the specified expression 'Expr1' as part of an aggregate function, this is in qrySessionsEverything.
The query name is qrySessionsEverything.
It executes the line:
SELECT * FROM qrySessionsEverything
The queries are below:
qrySessionsEverything
SELECT tblSessions.SessionID AS Expr1, tblSessions.CourseID AS Expr2, tblCourses.CourseName AS Expr3, tblSessions.SessionDate AS Expr4, tblSessions.StartTime AS Expr5, tblSessions.EndTime AS Expr6, tblVenues.VenueID AS Expr7, tblVenues.VenueName AS Expr8, tblVenues.Capacity AS Expr9, tblVenues.Capacity-[bytAttendees] AS bytAvailablePlaces, qrySessionsAccepted.bytAttendees AS Expr10, tblVenues.Link AS Expr11, qrySessionsPending.Pending AS Expr12, [TrainerFirstName] & " " & [TrainerSurname] AS strTrainer, tblSessions.TrainerID AS Expr13
FROM tblTrainers, tblCourses, qrySessionsAccepted, qrySessionsPending, tblVenues, tblSessions
GROUP BY tblSessions.SessionID, tblSessions.CourseID, tblCourses.CourseName, tblSessions.SessionDate, tblSessions.StartTime, tblSessions.EndTime, tblVenues.VenueID, tblVenues.VenueName, tblVenues.Capacity, qrySessionsAccepted.bytAttendees, tblVenues.Link, qrySessionsPending.Pending, [TrainerFirstName] & " " & [TrainerSurname], tblSessions.TrainerID;
qrySessionsAccepted
SELECT tblSessions.SessionID AS Expr1, tblSessions.CourseID AS Expr2, tblSessions.SessionDate AS Expr3, tblSessions.StartTime AS Expr4, tblSessions.EndTime AS Expr5, tblSessions.VenueID AS Expr6, tblVenues.VenueName AS Expr7, tblVenues.Capacity AS Expr8, [Capacity]-[bytAttendees] AS bytAvailablePlaces, Count(qryDelegatesAccepted.DelegateID) AS bytAttendees, tblVenues.Link AS Expr9
FROM tblVenues, tblSessions, qryDelegatesAccepted
GROUP BY tblSessions.SessionID, tblSessions.CourseID, tblSessions.SessionDate, tblSessions.StartTime, tblSessions.EndTime, tblSessions.VenueID, tblVenues.VenueName, tblVenues.Capacity, tblVenues.Link
ORDER BY tblSessions.SessionDate, tblSessions.StartTime;
qrySessionsPending
SELECT tblSessions.SessionID AS Expr1, tblSessions.CourseID AS Expr2, tblSessions.SessionDate AS Expr3, tblSessions.StartTime AS Expr4, tblSessions.EndTime AS Expr5, tblSessions.VenueID AS Expr6, tblVenues.VenueName AS Expr7, tblVenues.Capacity AS Expr8, tblVenues.Link AS Expr9, Count(qryDelegatesPending.SessionID) AS bytPending
FROM tblVenues, tblSessions, qryDelegatesPending
GROUP BY tblSessions.SessionID, tblSessions.CourseID, tblSessions.SessionDate, tblSessions.StartTime, tblSessions.EndTime, tblSessions.VenueID, tblVenues.VenueName, tblVenues.Capacity, tblVenues.Link
ORDER BY tblSessions.SessionDate, tblSessions.StartTime;
qryDelegatesAccepted
SELECT tblDelegates.DelID AS Expr1, tblDelegates.SessionID AS Expr2, tblDelegates.DelTitle AS Expr3, tblDelegates.DelFirstName AS Expr4, tblDelegates.DelSurname AS Expr5, tblDelegates.DelHospital AS Expr6, tblDelegates.DelDepartment AS Expr7, tblDelegates.DelPhone AS Expr8, tblDelegates.DelBleeper AS Expr9, tblDelegates.DelEmail AS Expr10, tblDelegates.DateSubmitted AS Expr11, tblDelegates.Accepted AS Expr12, tblDelegates.Rejected AS Expr13
FROM tblDelegates
GROUP BY tblDelegates.DelegateID, tblDelegates.SessionID, tblDelegates.DelTitle, tblDelegates.DelFirstName, tblDelegates.DelSurname, tblDelegates.DelHospitall, tblDelegates.DelDepartment, tblDelegates.DelPhone, tblDelegates.DelBleeper, tblDelegates.DelEmail, tblDelegates.DateSubmitted, tblDelegates.Accepted, tblDelegates.Rejected
HAVING (((tblDelegates.Accepted)=True) And ((tblDelegates.Rejected)<>True));
qryDelegatesPending
SELECT tblDelegates.DelegateID AS Expr1, tblDelegates.SessionID AS Expr2, tblDelegates.DelTitle AS Expr3, tblDelegates.DelFirstName AS Expr4, tblDelegates.DelSurname AS Expr5, tblDelegates.DelHospitall AS Expr6, tblDelegates.DelDepartment AS Expr7, tblDelegates.DelPhone AS Expr8, tblDelegates.DelBleeper AS Expr9, tblDelegates.DelEmail AS Expr10, tblDelegates.DateSubmitted AS Expr11, tblDelegates.Accepted AS Expr12, tblDelegates.Rejected AS Expr13
FROM tblDelegates
GROUP BY tblDelegates.DelegateID, tblDelegates.SessionID, tblDelegates.DelTitle, tblDelegates.DelFirstName, tblDelegates.DelSurname, tblDelegates.DelHospital, tblDelegates.DelDepartment, tblDelegates.DelPhone, tblDelegates.strDelegateBleep, tblDelegates.DelEmail, tblDelegates.DateSubmitted, tblDelegates.Accepted, tblDelegates.Rejected
HAVING (((tblDelegates.Accepted)<>True) And ((tblDelegates.Rejected)<>True));
Please can you help me.
Thanks,
Bash.
I am looking to check, whether i would be able to "add an Message box with a "Message : "Executes all queries all is well.mdb before executing this query ?" , if yes, continue executing the query, else, Exit out of the database?
View 1 Replies View RelatedI am trying to execute query every midnight at 00:05 and append data into a table. This query reads the data from a linked table and appends the records into the local table.
Access doesn't triggers so I have no clue which way to proceed.
Can anybody help me creating a logic to execute query at midnight?
Regards
Giri
How do i apply a query that i want to execute only on a highlighted record in a listbox.
If there is a link, sample database or lines of code could you please assist.
Currently everything is being executed on all of the records in the query.
Also Does Access 2000 support codes for drag and drop forms?
N.B. This is not your usual 'Bad practice to Store calculated values in a table' post
I have a table of items.
Each item has a different formula attached which I need to store as a literal value in the table and execute it as a normal expression in a query or vb.
e.g
Columns:Item, QTY, Hrs, mins, ItemFormula
Data: Car, 2, 7, 3, [QTY]+ [Hrs]/[mins]
So ' [QTY]+ [Hrs]/[mins]' would literally be stored for that rercod and is how it would be displayed in a table, form, report etc as it is important for the user to see how the calculation is performed as well as seeing the end result which will be calculated as normal in vb or a query.
The formula will vary from record to record.
How do I go about this?
TIA
Hi all,
I've searched for a solution, and the proposed solution didn't work for me.
I am executing an SQL statement to insert values into a History table when deleting a value in a subform. Two of the 5 values are asking me for parameters when the SQL executes and I cant figure out why! The datatypes they are inserting into are correct and I'm at a loss. The 2 values giving me grief are Manufacturer and Model.
Here's the code:
Dim sSQLMachHistory As String
MsgBox "me.acctid: " & Me.AccountID
MsgBox "me.manufac: " & Me.Manufacturer & " me.serial: " & Me.SerialNumber
MsgBox "model: " & Me.Model
'Insert into History Table:
sSQLMachHistory = "INSERT INTO tblMachineHistory (SerialNumber, Manufacturer, Model, AccountID, MachineID) VALUES (" & Me.SerialNumber & ", " & Me.Manufacturer & ", " & Me.Model & ", " & Me.AccountID & ", " & Me.MachineID & ")"
MsgBox sSQLMachHistory
DoCmd.SetWarnings False
DoCmd.RunSQL sSQLMachHistory
DoCmd.SetWarnings True
My message boxes show me all the values are displaying and should be inserting into the table -- any ideas??? :confused:
cheers
Mike
hi,
I was wandering if it is possible to implicitly execute code upon the opening of a database? If so how do I do this? I have code to convert the page settings of a report from a command click but wanted this to be done automatically...
cheers
tania
I have a mainform with a search function so the user can select a record to view and update. The selected record is displayed in Subform1 on Page1 of a tab control. The record source of this form is Query1. Page2 of the tab control contains Subform2; record source is the result of Query1 joined to Query2.
The forms correctly displays, updates and adds records my problem occurs when I add VBA code to the BeforeUpdate event of a control on Subform1. The code appears to execute once for each page in the tab control.
Has anyone any suggestions on how I can correct my problem.
Thanks
Fearless
Hi,
I am having trouble in implementing the TreeCtrl structure. I have a simple database for testing purpose and I am not able to make it work. There appears to be a problem with the bookmark property and I get an error message:
"can't Add child:Arguments are of wrong Type, are out of acceptable range, or are in conflict with one another".
I have attached the database here and could you please see what is wrong with my code.
Thanks
Priya
Hi
I have a Visible form and an Invisible (visible=false) form open at the same time. Is it possible to use a button on the visible form to execute the code behind a button in the invisible form. The subroutine on the invisible form is Public. I tried DoCmd.RunCommand and a macro with RunCode but... nada...
(There is a valid reason for this approach but i will spare you the boring explanation. I can think of a work around where I can bypass this need, but this way is cleaner (there are cases where the invisible form is visible and used directly, the form has data which is sent to a report to create a label). I have done everything else with VBA code but for some reason can't get this to work, so now i am obsessed)
Thanks, this forum is really a gem!
Hi,
I try to execute an update command i.e.:
UPDATE Results set Data = 'Heiner's key' where ValidationNumber = 1 and TestNumber = 2 and Line = 'E1'.
Access does not let me do this because the “'” in Heiner's terminates the update string prematurely.
Does anyone have a suggestion how to do this? Thank you.
is there a way i can call a sub forms procedure from the main parent form.
in other words i have a button command i want to execute
I am using ACCESS 2010, win 7 Home Premium 64bit
difficult to handle error when executing my report. I put a code into OnOpen section but ACCESS states:
Quote:
The expression OnOpen you entered as the event property produced the following error: A problem occurred while Microsoft Access was communicating with the OLE server or ActiveX Control.
Additionally it says in description:
This error occurs when an event has failed to run because the location of the logic for the event cannot be evaluated. For example, if the OnOpen property of a form is set to =[Field], this error occurs because a macro or event name is expected to run when the event occurs.
I am genuinely confused by that. I have also provided the code in the case if I am missing something I don't know yet. In a debug window, I have executed the code line by line and it worked. Whenever I try to open the report, the error occurs. Should I be aware of something when I write code for reports?
Below, the code in my report "module":
Code:
Private Sub Report_Open(Cancel As Integer)
Call CreateTempTable
End Sub
Private Sub CreateTempTable()
On Error GoTo ErrorHandler
Dim strTable As String
[code]....
What I am trying to do is execute a function M-F every 2 hours between 4am and 6pm. The 2 hour part was easy, I just created a form with a timer, but the other part isn't working so well, here is my latest attempt.
Code:
StrTime = Time()
If Not ((Weekday(Now()) = vbSaturday) Or (Weekday(Now()) = vbSunday)) And (StrTime > "4:00" Or StrTime < "18:00") Then
What is the best way to impliment a query in a form so that the user can view the query records, and have the option to print or save the selected record using command buttons?
I tried subforms but I could not get the command buttons to work in the subform after it went into the form, it wanted to print the entire form instead of the selected record from the subform.
So in a nutshell I have 3-4 queries that are built, and I want to have them show up on my form in a format that the user can scroll through the results and select a single record of the results and then print or save that individual record from the form, if such a thing is possible.
Thanks in advance
Todd
I am trying to do the good 'ol sales report (query) to include customers with no sales.
I have a customers table, account number table, sales table & sales (line) detail table. (all linked in that order)
If I run a query to show customers (in the customer table) with account numbers, that works
An unmatched query to show customer without an account number works (but of course the unmatched account number field isn't shown).
How can I get the two two be shown together with the "unmatched" having a null or 0 for their account number?
I am guessing in principle, the resulting solution can be modified to show customers without sales alongside those with sales?
In some cases I create pass-through queries and use these in an Append or Make-table query to bring data locally.
All is well and fine until source data changes and the pass-through query runs too long and times out.
If needed, I can extend the timeout value in the Parameters of the pass-through query no problem, but when I try to open the Append or Make-table query in Design view to do the same, the pass-through query is first triggered and then throws the timeout, and I cannot access the Design view of the Append or Make-table
Is there a way to open an Append or Make-table query in Design view without invoking the source query?
Hello All,
I'm trying to run a UNION query that joins five queries through a MS WorkSpace into a DAO.recordset in VB. I'm pulling the data from a SQL Server Database through VB in Access. I'm attempting to open a recordset with a query passed to it as a string. The query is below. For some reason, I'm receiving a message: "MS Jet database engine cannot find the input table or query. Runtime Error 3078".
Here's what's puzzling. When I run a single query without any UNION statement, the code finds the table and runs fine without error, but anytime I join two or more queries with a UNION statement in the VB, it gives me the error.
I've executed the same UNION query in both Access Query Builder and SQL Server's Query Analyzer and they work fine in both environments. It's only when I call the query from a DAO.Recodset with VB that it causes this problem. The following is a sample of the UNION query joining two of the five queries. Does anyone have any idea what could be the problem? The following query executes in about 5 seconds so I don't think there's a "time-out" issue. I'm thinking that the UNION statement may be the culprit. Maybe there's another way to approach joining these separate queries? Any help would be most appreciated. Thanks.
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((CategoryID) = 'HCPROD') AND ((BrandID)<>'CSS')) AND (((BrandID)<>'1356')) AND (((BrandID)<>'1400')) AND (((BrandID)<>'1551')) AND (((BrandID)<>'555')) AND (((BrandID)<>'66'))
AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
UNION
SELECT SalespersonID, Sum([SlsPrice]-[RtnPrice]-[SlsDiscnt]+[RtnDiscnt]) AS fldPrice FROM MyTable WHERE (((Source)='d') AND ((DistrictID)='01') AND ((ProductID) = '0029800')) AND (TransDate >= 07/01/2005) AND (TransDate <= 07/31/2005) GROUP BY SalespersonID
Set wrkJet = CreateWorkspace("", "pw", "", dbUseJet)
Set db = wrkJet.OpenDatabase("DW", _
dbDriverNoPrompt, True, _
"ODBC;DATABASE=DW;DSN=DW2")
'Set rs1 = db.OpenRecordset(strSQL)
I am wondering if there is a quicker way to export a query to excel then have the data in that query removed from the original table. (effectively cutting the data from the table and exporting to excel)
I understand that this can be done by exporting the query to excel then running the same query as a delete query to remove the data but I just wondered if this is the most efficient way.
I have experience of VB in excel but currently only use the basic macro builder in Access though if Access VB is more efficient I can easily learn.
I run a physical therapy office and patients come in for treatment either 3, 4 or 5 times per week. My database is used to track these frequencies (among other things).
I have 3 queries which count how many patients come in 5, 4 and 3 times/week.
In my main table I have fields called "how many 5's", "how many 4's" and "how many 3's".
I have tried to design an update query which will update those fileds in my main table to reflect the counts in the 3 queries mentioned above.
(I'm not using SQL view, I'm using the query design view)
In the "update to:" row, I use the Build function and locate the count I'm looking for.
Problem: when I run the query I get the error: Operation must use an updateable query.
I have a query where these are the fields:
ProductRevType
RevLag
RevFlowThru
CloseMoYr
ProjRevDate
CurrentMRC
ProjRevMRC
The ProjRevMRC field is an expression that reads:ProjRevMRC: IIf([ProjRevDate]>=DateSerial(Year(Date()),Month(Date()),1),[CurrentMRC]*[qry303a_ SFADetailMRC_ONLY]![Rev Flow Through],0)
When I run the query, it works perfectly, but when I created a crosstab query to show totals by month, I wanted the totals to be zero for the months less than the current month. Is there a way for the crosstab query to execute the expression and put zeroes for those months?
I have a field that is giving me the number of business days between a period of time and then I want to subtract that number - the person's PTO time to see the actual days they were available...when I simply type the number in (see below) it works great but I want to set up a prompt that will ask me how many PTO Days to calculate as it will be different for each person I am quering...is this possible?
View 9 Replies View RelatedI have a form which will be used as the basis to print a label.
It is bound to a query and when I open the form I pass over a 'where' condition to return 1 record. I then use the query to produce a report/label.
What I want to do is to update the form/query without updating the underlying tables to the query.
:confused:
I am trying to help someone with a complex problem (so it seems to me) but I will first ask about what should be a simple thing....
First goal: to COUNT the number of times a TYPE of visit is made.
There are several different TYPEs but only interested in tracking 2 of them.
When a crosstab query is created - if one of the 2 parameters are not "met", a blank is returned. I have been reading posts about using NZ and IIf IsNull, etc to get past that - but none of them make any sense to me and the Access help suggestions do not work. Hope someone can make it clear with this information: (can't give more specifics to keep privacy intact)
The SQL was written by Access not by me. :)
Here is an example of the Crosstab SQL (which is using a previous query):
TRANSFORM Count([qryTest2.TYPE]) AS CountOfTYPE
SELECT qryTest2.CID
FROM qryTest2
GROUP BY qryTest2.CID
PIVOT qryTest2.TYPE;
-----------
qryTest2 SQL: (Grouping by to remove dups)
SELECT DISTINCTROW tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
FROM tblM LEFT JOIN tblC ON tblM.[M#] = tblC.[M#]
GROUP BY tblM.CID, tblM.[M#], tblM.LNAME, tblM.FNAME, tblM.YMDBIRTH, tblC.ClDOS, tblC.TYPE
HAVING (((tblC.TYPE)="Out" Or (tblC.TYPE)="In"))
ORDER BY tblM.CID, tblM.LNAME, tblM.FNAME;
Thanks for you time! :)
I'm building a report for annual software license renewals. The report data source is a query that combines the customer information, their computer information, and the licenses purchased for that computer. I am having no trouble with the form displaying the customer info page, then a page with the computer info at the top and a list of licenses purchased for that computer underneath.
That would be great, if that's what my boss wanted. However, she wants the whole list of available licenses displayed on each page, in the event someone want to purchase additional licenses with this year's renewal.
I'm trying to figure out how I can set up a query/report grouping to do that. I've tried making a new query, relating the qryLicense!licenseID to the qryPurchase!purchLicense and setting the relationship option to show all records from qryLicense and only those related from qryPurchase. I added the qryPurchase!purchCPU field to my query, hidden it, and set the criteria to “=1” (the computer ID of one of my dummy computer records). I also have a Sum of the qryPurchase!purchQty field included in the new query that I want to display the total number of that particular license purchased (and 0 if there are no corresponding records). All fields except for the quantity field are set to Group By.
What I’m getting from this is simply a list of the licenses purchased for that computer, not the complete list of licenses available showing the quantity purchased where applicable.
Can someone see where I’m going wrong?
Slaughter
slaughter at mizzou dot edu