I have an expense report I am trying to create. Expenses are 1 of 4 things (monthly, quarterly, semiannually, or annually occuring). If I enter a record say today:
8-04-2006--Window cleaning--$400.00--yearly
Is there a way to get it to automatically re-occur on the same day next year. (I want it to automatically reapply itself next year, not today showing next year. does this make sense?)
I want it to show up as a new record tho
Hi, AM very new to Access and currently (trying) to creating a DB to safe me time filling out my expense forms manual. (dark ages pen & paper) :confused:
I've used the same table/fields that this form would required if I was filling it in by hand. Am I able to create drop down box's with prefix information in these table/field? can you do this on Access if so how would you do this?
I would also like to calculate the mileage using the info from drop down boxes ie from leeds (value of 2) to Manchester (value of 10) based on standard mileage I can claim for (0.10p) = (£2.00) in my remarks field I would wont to be able to prefix this i.e 20 (being the value of 2x10) miles each way @ 0.10p (being the set mileage)?
Am trying to use the same form that I would fill in manual. But having difficulties trying to fit this in forms. I've changed the paper layout & margins etc but still missing about a inch of information that's required on this form :confused:
The form will only allow you to fill in 11 lines of info b4 you need to fill out another form
How would your database know when to create a new form when the 11 field/lines have been filled with data?
How do you add up your columns?
How would you bring a balance b/fwd to you next sheet leaving only 10 lines of info to be inputted?
Any help with the above or any direction or further informatin required would be much appreciated
Thank you
DragonJJ
I have attatched a word document showing values and what I need. I want to create queries (monthly, quarterly, semi-anually, yearly). I am working with the monthly right now and if I can figure that out I am assuming I will be able to figure the others out the same way. For the monthly report I want to divide the quarterly amounts by 3, semi yearly amounts by 6, and yearly amounts by 12. Then I want their respective values to appear in the monthly statement. How do I do this?
View 1 Replies View RelatedI have an expense table and I want the expenses to be written to a new table every month, quarter, half-year, or year depending on what the user has selected. I want to group the expenses somehow and I want it to show all monthly expenses, then show which ones have +1 month. All those will get put into a append query and added to a new table that stores all the expenses from hence forth.
Alright, I have started to figure it out ( a problem from earlier) but I think I need some help. I want an if statement but I am not familiar with date functions. In an append query I want to look at my original table and add records if it is past a certain date.
For a monthly expense (entry date is 01/01/2006)
If (dateentered) month, +1
Then write the record.
I am working on a personal expense ledger. On a particular field that is labeled [expense/income], and a field labeled [amount]. the [expense/income]field is a listbox field "with expense and income as the values. Here is what i want to do. when i select income from the listbox i want it to sum the total in the amount] field, and if i select expense i want it to subtract the total in the [amount] field. i hope i explain it correctly.
View 4 Replies View RelatedI have a subform in columns that has a list of invoices bound together by the site number on the form there is a Expense code that runs 51 to 95.
On another tab I want to add all the invoices for a expense code together and display the total amount
Below is an example of invoices
IDSite CodeInvoice DatePOInvoiceContractorInvoice AmountExpense Code
10289S20/09/2013 346603410Dj Commercial Cleaning Ltd 25.2362A
20289S28/09/2013 346061141Platinum Landscapes 240.0055A
30289S03/09/2013 353112021Clean And Green 167.0063A
40289S02/08/2013 353112015Clean And Green 174.0063A
50289S19/08/2013 111115271Southern Electric 189.5679A
60289S19/08/2013 346061121Platinum Landscapes 240.0055A
70289S02/06/2013 353112009Clean And Green 160.0063A
80289S02/05/2013 353112003Clean And Green 181.0063A
I want it to display on another tab
51 General Expenses £452.36
55 Gardens £1523.65
and so on
whats the best way to do this?
Does the MS Access Report support Hide/Show specific fields according to parameters or even by click?
View 3 Replies View RelatedI'v looking for since a couple months a go to make a report direct from access form using crystal report but i havent found it yet. I'v tried this code and its giving me errors. " run time error 1004 method range of object _global failed "
how to make a report using crystal report direct from ms access as front end application ? is it possible to use crystal report ?btw i use database sql server 2008 and MS Access 2007 as my frontend application.here's the code that i'v found and gives me an error
Dim CR As New CRAXDRT.Application
Dim rep As CRAXDRT.Report
Set rep = CR.OpenReport(Range(" ??? ")) * i getting error in this line, what should i do to fill it ??
rep.ParameterFields(1).AddCurrentValue "Boston"
rep.ParameterFields(2).AddCurrentValue "Cars"
rep.Database.Tables(1).SetLogOnInfo "tool", "db_tsel"
rep.ReadRecords
rep.PrintOut promptUser:=False, numberOfCopy:=1 ' promptUser:=True doesn't work
I have a form with 7 List boxes linked to 7 Query's which in turn are linked to a table. Each list box if for a particular trade.
I am trying to select a person or persons from each List box and then have them sent to a report. I have Code to do one list box, but do not know how to link all boxes with code to a 'Open report' button.
The code I am using is as follows:-
Private Sub cmdOpenReport_Click()
On Error GoTo Err_cmdOpenReport_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
'make sure a selection has been made
[code]....
The aim of what I am doing is to create a monthly statement to give to our intermediaries that shows the commission they will receive each month for the deals they have referred. I have managed to create this report, HOWEVER I can't figure out how to filter out which month I need, so I a report for Jan, Feb Mar etc... The idea is that at the end of each month I need to run the report so only the latest month shows...
View 3 Replies View RelatedI have a report which programmatically sets the value of some labels based on its own internal logic for each line of the detail section of a report. This all works fine and dandy, using the Detail_format event, and accessing detail.controls.item(x).caption.
HOWEVER, when I then embed the report as a subreport (which I need to do), I goes wrong. Here, I get the values of the last row of the detail repeated in every previous one. I'm suspecting because the parent report has its own 'detail' (I've tried giving the subreport its own distinct detail name).
How do I hide the report footer based on the report's data ?
I'm trying to hide if number of users = 1
The report's data is a query built inside the report's RecordSource, not a self standing query.
I've done this once entirely by accident and can't seem to duplicate it...
I have a report. It has the following:
Report Header: Logo and title
Department Header
Supervisor Header
Group Header
Detail
Department Footer: Totals
Report Footer: Overall Totals for all departments
Here's my question.
I have combo boxes on my main form that filter this report. The combo boxes are referred to by the query that runs the report. How do I get proper unfiltered overall totals in my report footer?
I have a report that displays incidents, their details, consequences and a photo. Among the details is a severity rating high medium or low, I have been asked to make the report shorten the records which have been given a low severity (because it takes up as much space as the more important/severe ones).
The only method I can think of is to use the onformat event, to shrink and make invisible all the fields that I don't want to see if the severity field shows 'low'.
We have a shift log that includes both personnel actions during any given day as well as operational actions. (We recently switched from a word document to an Access Database to allow multiple users to input events while another has the logbook open already (which you couldn't do with Word))
At the beginning of each day, my manager reviews the previous days log and forwards up pertinent data (some personnel, some operational) to our higher authorities. Is there a way to allow him to select which records he'd like to include on that higher-authorities report straight from the local-level report?
I'm not a fan of allowing him a "Save As" feature because that kind of defeats the data integrity purpose of an events log where he could save as an RTF and then edit any of the log entries without any checks or balances.
I have an odd thing happening with my reports. There is a main report that gives class information (from query). There are two subreports (from queries also ) with scores (one for each type of test). There are some unbound controls on the main form that display a count of how many scores are recorded which are totals from the subreports. The controls all report the correct numbers however, when I scroll down to view each record, some of them change to #error, or #name, or similar for a moment. Sometimes they will stay in error form when I stop scrolling but change to correct if I scroll up just a bit. Is this because the controls won't calculate unless that report record has focus?
View 1 Replies View RelatedI have a three-column query that tells me how many hours I have available per week for a given resource type (e.g. welders). I have a second three-column query that tells me how many hours of work I have planned per week for a given resource type.I'm hoping to produce a query (the source for a report) that will show resource types in rows and twelve months in 24 columns. the first column for each month will show how many hours I have available for all my resources, the second column for each month will show how many hours I have allocated.
How do I produce a query that will combine the other two queries, inserting zeroes where necessary considering that for any given week I might have allocated work to a resource that isn't available (because the inconsiderate buggers think they are entitled to holiday) or I might have a resource that has no work allocated (because I'm incompetent)?
Is there a way to hide a label on a report if the sub report count is 0?
View 2 Replies View RelatedI have an asset data base to generate individual asset detail reports with a sub report on the same page listing similar assets from a separate query. I have set the master and child fields, one to many. This works perfectly for the first two assets (pages), however the sub report stops showing data on the third asset (page).
View 13 Replies View RelatedHi,
Can you tell me if it is possible to create a main report with a Portrait view and then add a sub report to the main report and print this out in landscape mode. If you can please can you advise on the best way to do this. Thanks PWF
So I have a text box in a report that I want to pull in data from a field in another report, so the 'control' for my text box looks something like this...
=[Reports]![rptSalesReceiptSub]![Text141] (i.e Text141 is the data I want to pull into my report)
...the path is completely correct but when I run my report I get.#Name? If I run the report that has the data I want, it's fine (in other words Text141 has valid data in it)
I am wondering if it is possible to send a report as xls file and keep the format exactly as the report looks.When I try to send it now, it automatically changes back to the column names from the table, which I in the report have changed and want to keep in my excel output!
View 3 Replies View RelatedOn this form, there is a text box for Quantity...At the end of the form, there will be a button that when pressed:The current record the data on the form is entered for is saved,A report is printed on a specific printer,I do not want the report to actual display,The number of copies it prints should be equal to what the quantity field indicates.I do have the report already created and the Quantity field is on the report (just not visible).Once this all happens, it should return the user to the form, that is blank, waiting for a new record entry.
View 1 Replies View RelatedThe company I work for has branches in multiple states and we use Access to organize all their tax requirements. We print out reports for every month, and my company would like to create a pop-up window that will let us filter the report when it starts up so that it automatically shows only the dates that we wish it to. How do I create a filter that pops-up when the report starts?
View 1 Replies View RelatedI have an unbound form with an associated report. When the user hits the 'print' button on the form/screen, the report is launched in the background. In the On Load event of the report I populate the report fields from the forms field as so:
Code:
Me.txtAddrMainLine2 = "NAME " & UCase([Forms]![frm_OrderRx].[txtPatientName])
This works like a charm as long as I call the report in Print Preview mode (i.e. with acViewPreview). But if I send the report directly to the printer, none of the fields print.
I've read about using other report events to populate the fields (e.g., On Format and On Print) and also something about using TempVars to pass the data. But I haven't read anything that's clear and definitive about the full answer.
In Access 2010, I have a simple sub-report I use to count a field. Works perfect by itself. However, when I place it in the main report the results change. And it doesn't matter where I place it in the Main report, it still returns a low count. Is there some filter I am missing?
View 5 Replies View Related