I hope someone can help with this one. After many years of using Access for ad-hoc data conversion this has beaten me.
I need to produce an ascii text file with fixed column widths, separated by commas, strange I know but the customer is always right. As it is fixed width I have inserted the commas by using a separate column for each one.
Numeric columns need to be left padded with zeros. I have constructed a query to do all the column selection and reformatting into a new table which I then export using a fixed length export file spec. Everything works fine except for 3 columns which are calculated by subtracting one column from another. I can get the data to look fine in the output table, the datatype is text, but when I export the table the leading zeros are stripped.
This is my expression: String(9-Len(FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0)),"0") & FormatNumber([FULL_FARE_EQUIV]-[TAX_EQUIV],2,0,0,0).
The result in the table is exactly what I want: 000200.00 but when I export it I get a left adjusted 200.00.
I've tried using format with a "000000.00" mask which gives the same results.
I've tried removing the preceding comma column and including the comma as a prefix using the format mask ",000000.00" and also by concatenation. This looks fine in the table column ,000200.00 but I get an error when I export the table which blanks the column. Error attached.
This is probably an easy question by comparison to some of these others.
I have a table where a transaction number is always 8 digits. If the number is not 8 digits, it should start with zeros, such as
12345 should be 00012345
123456 should be 0123456
Is there a simple and fast way to do this? It can also be done in a form, since I enter the data through there. Will it be necessary to change the field from a number to a text data type?
I am formatting a table to be exported via fixed width and one of the main frame requirments is to have the dollar amount with leading zeros. So if a dollar amount is 500.02, I would need to update the tables dollar amount to 00000000000050002. Since the dollar amount will change, I will only need the leading zeros for the blank spaces because the field is right justified (for the mainframe).
I have a table and one of the entries requires a 10 digit number. I have added "0000000000" as the format, but in the form to populate the field if I only enter 6 digits it just adds leading zeros.
I have been working in Access 2007 creating a database. For the most part I've been able to figure everything out but I have a field where I'm putting a three digit code. It has an input mask, that is set as a text file, and is "000". I thought that would force all three numbers to show even if there was a zero in front.
However, the leading zeros are being removed and I can't figure out how to make them stay so that I can see them.
I'm learning as I go and this is probably a basic question but if I have an alpha numeric field of variable lenght, i.e. AUI856Z....how to I format it so that it is 19 characters long with leading zeros, i.e. 000000000000AUI856Z.:confused:
I have 2 linked tables from 2 different databases, there is a common field in both: “CORP_NBR” I need this field in order to create a join, but the problem is that in one table this field stores leading zeros and in the other table it doesn’t. I can see in design view that this field is text type in both tables. I cannot change field types because I don’t own the objects.
Is there a way or a function that I can add in my join query to ignore leading zeros? :confused:
I have a column in my table, and its size is set to 10 characters. In a form, i have a combobox based on that column, which contains the values "Corrective", "Preventive", and "Supplier". both Corrective and Preventive are 10 characters, and fill up the field to its max, however, Supplier is only 8 characters. When I look back in the table data, there are two spaces after Supplier. Basically, I can use the arrow keys to "see" the two blank character spaces. Why is that? Are these extra blank spaces taking up space they shouldn't?
In my table I have a numerical field for case numbers. Our case numbers are in the format of YYMM000000 (YY = 2 digit year, MM = 2 digit month, remaining 0's are consecutive case numbers). In order to properly list the case numbers in descending order, I have
caseyr: Left([CaseNo],2) (which pulls the first 2 digits being the year) officeno: Right([CaseNo],3) (which pulls the last 3 for our part of the case number)
This was working fantastic until I had to enter cases from 2009, ex: 0911000587
I have set the format for the CaseNo field to 000000000 everywhere it is. It displays the 09 cases perfectly, retaining the zero, however, my left function ignores it. In the case number of 0911000587, it pulls 91 as the first 2 digits. So, in the form that I list my cases in order, the 2009 cases are showing up first (because they're pulling as 91 instead of 09).
Is there anything I can do to force it to NOT ignore the leading zero?
I have an autonumber field (CarNo). This field is to be displayed as a 5 digit number on the form, ie: 1 is to display as 00001. I know I have done this before (I only use Access once a year or so, so the mind is not fresh on this) I can use a text box on the form because the user can't change the field, but how to display the autonumber as a 5 digit number, including leading zeros. I found the code of Format(FieldName, "00000"), but don't remember where to put it.
I have read that the number field doesn't show the leading zeros in 2007... does 2010 have a way to do that, or does it still have to be a text field in order to see them..?
My first question is how do I append 00001 so I can have a value for the false side of 9123400001 instead of 912341...My second question is why does it prompt me to enter parameters? It also produces all false values from the if statement...What I am trying to do is use a column that has either a Y or a N and using the if statement to correspond with different formulas depending on the Y or N.This what I have so far.
I want to import a fixed length file into access 2003, it can only be imported directly into access 97/2000. This site, link http://www.ams.usda.gov/science/pdp/03data.txt has the idea, but the problem is I can find the "2003 Data zip file" which this site is refering to. - I have looked for it on the ms office 2003 cd,but I still can find it. Please can someone tell me where I can find de "2003 Data zip file"?
I have a table where I want to break longer strings into three-character strings.
So... for example the data item "Forest," I'd like to generate "FOR" "ORE" "RES" "EST" and write all four to another table, allowing for duplication. Alternately, we could make a list and just count the unique 3-character strings. The end goal here is to measure the frequency of 3-character strings across a set of data.
I have a table, with a whole series of reference numbers in, which I have moved over from an old database, and am trying to integrate the data into my new database.
The numbers, in order to work with my new db need to be 6 characters long (as they are looked up in a sql-stored table that another application uses), otherwise it won't match up the clients to the reference numbers properly.
Anyway, some of these numbers are 6 digits anyway, such as 123456, but some are just 6543....I need 6543 to be changed to 006543, thereby creating a 6 digit number.
This, I am sure, is pretty simple, and only needs to be done the once - but I can't think of a way of doing it!
I have an unbound control in data input form requiring to input a 6-digit number. I have put a validation rule restricting more than 6 digits. Most users prefer to enter, say 123 and the system can enter the 3 leading zero for them.
I need to convert my text data to a number but when I convert using the VALUE function or use "format cells" to the numbers category, I loose the leading zeros. I need to keep them for sorting purposes.
I'm trying to export a table to .csv file, but I want fields with null values to be padded with spaces. ie. if the field length is 50, but there is a null value, I want all 50 spaces.
I searched the forums and couldnt find anything that directly related to my issue. What I am trying to do is export a fixed-width text file, but the issue is that the file has to be line feed only. By default Acces creates CR/LF and the client's import specification only allows for Line feed.
I am currently using a macro, with export specification, to create the file. Due to time constraints and other obligations, I am really trying to avoid VBA programming.
I am trying to export a text file to be imported in to excel but whenever I export as fixed width all by number columns get cut to 2 decimal places, does anybody know how to get around this?
