Export To Excel And Graph
Jan 4, 2006
I am trying to export the result of a query to a specific Excel sheet where I have a dynamic graph. The results are exported on a monthly basis, so I am just adding the data, and the graph reflects that. Now, I can export to excel easily enough by using the Transfer Spreadsheet method, but this creates a new worksheet, thus destroying my lovely graph. I have even tried the Output Query method, but to no avail. Is there any way I can export to excel and keep the graph intact?
David
View Replies
ADVERTISEMENT
May 7, 2014
I'm trying to have a linked Excel chart in Access form. What I've done so far is create a chart in Excel and Paste Special>>Linked into Access.
I also have code inside Excel that will update chart data, it works fine.
Then I have code in Access that calls the code in Excel to update the data.
The data gets updated fine and the chart in Excel gets updated but the chart in Access only gets updated if I close and open the form again.
Here is the code that will update the Excel Data
Public Sub Import_VRSS_Graph_Data(strDayType As String, strTimeBand As String, strEntrance As String, Ws As Worksheet)
' Create a connection object.
Dim cnPubs As ADODB.Connection
Set cnPubs = New ADODB.Connection
' Provide the connection string.
Dim strConn As String
[Code] ....
View 2 Replies
View Related
May 14, 2014
I have a linked Excel graph in my form. The process I go though to update them is:
User clicks on button
Excel opens up
Procedure in Excel runs that updates the data and the graphs
Excel Closes
The user does not see any of that. This process works fine. But the linked graph does not actually update in the Access Form. To do that I run the following code:
Code:
Set ctl = Me!OLEUnbound_pream
With ctl
' Enable control.
.Enabled = True
' Set Locked property to False.
.Locked = False
' Set Verb property to activate for editing, but not visible
.Verb = acOLEVerbShow
.Action = acOLEActivate
End With
The problem I get is that once .Action = acOLEActivate is ran, Excel opens. I don't understand why it does that and how do I close it.
View 3 Replies
View Related
Apr 25, 2013
I am using Excel and Access 2010.
I have an excel spreadsheet with 8 tabs. They are all in the same format and column order. They are employees grouped by region. My ultimate goal is to merge all of these onto one excel tab, relatively instantly. I created a master tab and tried doing array formulas and Vlookups, it worked but my spreadsheet was way too slow.
My solution? Import and link them to an Access database, step complete. Create an XML export then import into Excel.
My problem? The only way to update the excel tab with the combined tabs is to save the excel file after changes, go back into Access, re-export to XML, then go back into excel and refresh the data.
My questions, is there any way to automate this process to the point that I can change excel, save, then hit refresh on my excel tab with the XML import to auto-update?
View 7 Replies
View Related
Aug 25, 2013
i want to export a table to excel , open this file and execute a macro from another file.
the code i have now is :
Code:
DoCmd.OpenTable "Overzichtaanwezigheid", acViewNormal
DoCmd.RunCommand acCmdExportExcel
DoCmd.Close acTable, "Overzichtaanwezigheid"
Dim XL As Object
Set XL = CreateObject("Excel.Application")
XL.Workbooks.Open ("C:UsersErwinDocumentsOverzichtaanwezigheid.xlsx")
XL.Visible = True
XL.Run "d: est.xlsm!Macro3"
Opening the excel file goes ok, running the macro however not.
View 1 Replies
View Related
Oct 21, 2012
how i can export the data from Access to excel using Access VBA for the specified sheet using data linkage with access database. Like we used to do it manually in excel as external data from access.Like we have some codes for linking excel file to database mentioned below;
DoCmd.TransferSpreadsheet acLink, , "region", "F:DB PracticeBook1.xlsx", False, "region"
Can we have something like this to link database table in excel file automatically.So that the excel size won't be that big and also it saves processing time.
View 5 Replies
View Related
Nov 4, 2005
I have a table of applications (200 applications), with the following columns for each application:
AppName
Description
BusCrit
BU
NumUsers
I need to export this to an excel spreadsheet into specific rows and columns and then save the spreadsheet, with it named for the application (ie, App1.xls) which it should get from the AppName column in the table. How would I do this?
View 1 Replies
View Related
May 5, 2005
hi,
I'm having a small but annoying problem exporting data to excel and then importing it back..
The problem is that when i export a table to Excel - it changes the date format from dd/mm/yy (which is what i have in Access) to DD-MMM-YY (automatically in Excel)
This proves to be a problem because when i import the spreadsheet back Access gives me a data type conversion error.
Its easily solved manually by changing the field in excel to dd/mm/yy format but annoying as the user will have to do this everytime they export and import!
Any suggestions??
Thanks in Advance..
View 6 Replies
View Related
Oct 17, 2005
I've been asked to export an MS Access report to Excel. I'm having trouble with including subtotals, totals, etc. in the Excel sheet. I've enclosed a picture of how my report looks in Access, and was wondering if there's a way to export everything the report has into Excel......
Can anyone maybe point me in a good direction, or to a link that has info re: what I want to do?
And before anyone asks, it's for a manager who insists that everything be done in Excel, since that is what he's comfy with. Outside of that, I wouldn't be giving myself headaches, since my Access report contains everything needed.
Thanks in advance!
View 6 Replies
View Related
Sep 1, 2007
Hi guys, me again. Have a few functions that I would like to put into action.
1)
I currently have the following code that exports multiple queries to excel. All works great I am happy to say. Currently the date criteria are hard coded into the queries. Well now my users would like to enter date ranges instead. Currently when I click on my toggle button, the users are asked if they are sure they want to start export to excel. I still want that to happen, but how can I change my code to prompt for startdate and enddate before running the export. I would rather use an input boxes to enter the date range instead of using a form. Would this be possible?
2)
Right now excel is displayed on the screen while the export is in process, how can I hide excel and then have it appear after its done with export. If the user clicks within excel during export, it sometimes freezes. And how can I apply my module for the progress bar to display the progress of the export. I have provided the code of the progress bar that I am using, that I found on this forum.
Many thanks for any suggestions.
Option Compare Database
Option Explicit
Public Function ExportDataExcel()
Dim strFilePath As String
Dim strFileName As String
Dim strFileTemplate As String
Dim strMacroName As String
If (MsgBox("You are about to generate the LAR Monthly Report. Are you sure you wish to continue? You cannot cancel this procedure once started.", vbOKCancel) = vbCancel) Then
Exit Function
End If
'''''''''''''UPDATE THIS DATA WITH YOURS''''''''''''''''''''''''''''''
'Fill in the following with your files and path
strFilePath = "R:Call CenterCall Center DepartmentsMortgage DeptMortgage Statistics & Tracking"
strFileName = "BigLarOutput.xls"
strFileTemplate = "BigLarTemplate.xls"
strMacroName = "DeleteBlank"
'''''''''''''''''''''''''''''''''''''''''''''''''' ''''''''''''''''''
'This deletes the old file
Kill strFilePath & strFileName
'This recreates your file with the template
FileCopy strFilePath & strFileTemplate, strFilePath & strFileName
'This is a custom function I built to set Excel as an object and you can access/export
'to a workbook programmatically. 'openexcel' is stored in a module called Functions.
'This will open the new file that was created previously
openexcel strFilePath & strFileName
'''''''''''''UPDATE THIS DATA WITH YOURS''''''''''''''''''''''''''''''
'Export data is another function that will export your data.
'Update the query Names to your real Query Names
'Update the Sheet Names accordingly, with the Query it is assiged to
ExportData "qryHoeqDotApproved", "HOEQ DOT APPROVED"
ExportData "qryHoeqDotReceived", "HOEQ DOT RECEIVED"
ExportData "qryHoeqDotDenied", "HOEQ DOT DENIED"
'''''''''''''''''''''''''''''''''''''''''''''''''' ''''''''''''''''''''
xl.ActiveWorkbook.Save
'The Application.Run will run the Macro(s) that you saved in your spreadsheet
xl.Application.Run "'" & strFileName & "'!" & strMacroName
xl.ActiveWorkbook.Save
'Uncomment/Comment these to close out the workbook
'xl.ActiveWorkbook.Close
'xl.Quit
Set xl = Nothing
End Function
Private Function ExportData(strQuery As String, strSheet As String)
Dim intR As Integer
Dim rs As Recordset
'After you open that Object/Workbook, you refer to that workbook now as 'xl'. You will
'use it later, but now you have to access your queries through this code and to do so
'you need to use a recordset.
'strQuery is the name of the Query that you passed with the Function. You can also
'use an SQL string.
Set rs = CurrentDb.OpenRecordset(strQuery)
rs.MoveLast 'moves to the last record
rs.MoveFirst 'moves back to the first record
'You can use record count to make sure there are records in your Query/Recordset
If rs.RecordCount < 1 Then
'There are no records
MsgBox "There are no records for " & strQuery
Else
'There are 1 or more records. Now Select the sheet that you will be exporting to
xl.Sheets(strSheet).Select
'Now you need to loop through the records. 'intR' was dimmed at beginning of this
'function and will now use it to create a loop or 'For, Next'
'Starts with record 1 and gets the count of records in the recordset so it knows where
'to stop.
For intR = 1 To rs.RecordCount
'Now we need to export the recordset/query to the workbook/object we opened earlier.
'Remember 'rs' refers to the recordset & 'xl' refers to the workbook
'xl.cells(ROW,COLUMN).VALUE = rs.fields(INDEX).
'This is how you will fill in the value of a cell on the workbook. For the ROW you
'will want to add + 1 if you have Headings on your sheet. The INDEX for rs.fields
'refers to the columns of the recordset/query. The first column of the recordset
'starts with the index of zero.
xl.cells(intR + 3, 1).Value = rs.Fields(0)
xl.cells(intR + 3, 2).Value = rs.Fields(1)
xl.cells(intR + 3, 3).Value = rs.Fields(2)
xl.cells(intR + 3, 4).Value = rs.Fields(3)
xl.cells(intR + 3, 5).Value = rs.Fields(4)
xl.cells(intR + 3, 6).Value = rs.Fields(5)
'If there are more columns to add than this just follow what I have above
'Moves to the next record
rs.MoveNext
Next intR 'Loops back to For and enters data for the next row
'Once the export is done, this just puts the cursor to A1 on each sheet
xl.range("A1").Select
'Clears the recordset
rs.Close
Set rs = Nothing
End If
End Function
' Code inside progressbar module
Option Compare Database
Option Explicit
Function RunProgressBar(lLth As Long)
If IsLoaded("frmSplash") Then
Forms!frmSplash!Box20.Width = lLth
End If
End Function
Function IsLoaded(ByVal strFormName As String) As Boolean
On Error GoTo Err_IsLoaded
Const conObjStateClosed = 0
Const conDesignView = 0
If SysCmd(acSysCmdGetObjectState, acForm, strFormName) <> conObjStateClosed Then
If Forms(strFormName).CurrentView <> conDesignView Then
IsLoaded = True
End If
End If
Exit_IsLoaded:
Exit Function
Err_IsLoaded:
MsgBox Err.Description, , " Service Operations"
Resume Exit_IsLoaded
End Function
Public Function Pause(NumberOfSeconds As Variant)
On Error GoTo Err_Pause
Dim PauseTime As Variant, Start As Variant
PauseTime = NumberOfSeconds
Start = Timer
Do While Timer < Start + PauseTime
DoEvents
Loop
Exit_Pause:
Exit Function
Err_Pause:
MsgBox Err.Number & " - " & Err.Description
Resume Exit_Pause
End Function
View 7 Replies
View Related
Nov 23, 2007
What can be the reason ?
i'm doing it through a regular "Import Spreadsheet Wizard", and get a message "an error occured trying to import file"
File is not open. Made a copy under a different name; still can't import..
View 4 Replies
View Related
Mar 17, 2008
Hi,
I am new to access application need some help, I have a table with around 100,000 rows and i want to export this to excel in two separate sheets of 50,000 each , i tried applying filter to see if i can pick some unique values was not successfully, pls advise on this how this can be done
Thnks,
Mysteryboy
View 4 Replies
View Related
Jul 14, 2006
I tried searching the forums and haven't come up with anything that sounds like what i'm looking for. I have a VERY simple database that has a list of personnel and whether or not they are available for an event. I would like to have a command button on the form where I change the availability that will export the selected personnel to an Excel file and (if possible) save it with todays date as the name of the spreadsheet. If anyone can point me in the right direction I would appreciate it :)
View 4 Replies
View Related
Oct 9, 2007
I have a query in access 2002 named "FMC DETAIL / MEMBER" when i export to excel 2002 with named "FMC DETAIL_member" the export says "Path is invalid"
My main point is that "/" should be replace with "_" in file name automatically.
In access 97 query named "FMC DETAIL / MEMBER" when export to excel the "/" is renamed to "_" automatically.
Any Help would be appreciated.........
View 1 Replies
View Related
Jan 28, 2008
Hi! I know queries can be exported to excel by the option "File > Export".
The fact is that I'm using "order by" options and some functions like "Month", and "Export" options appears disabled, is there a way to export this query to Excel? :confused:
View 2 Replies
View Related
Sep 8, 2004
I have designed a report in Access, which i am happy with, one of the next requirements it to Analyze it in excel...
is there a way to do the following :
automatically export the report into excel without having to click the button on the toolbar,
example:
click button on my form to run the report ----> report opens ----> Analyze in Excel starts automatically.
when i anaylzing the report in excel the formatting of the report is all over the place, can i set this up to auto tidy on opening..
View 1 Replies
View Related
Dec 2, 2004
Hi there,
I have a button on a form and when I press it I would like this to happen:
Some code will be run that makes a copy of an templatefile (Excel), puts the values that comes from my query into the document and the saves it with a name that comes from two textboxes. I would also like to be able to put in some other text in the document, like two dates that I have on my form. Does anyone know how to do this ???
View 14 Replies
View Related
May 18, 2005
I would like to export a access report to excel. All rows and columns exported correctly except from text fields (missing or change to a strange number). I've also think about to write a vb script to export the result recordset of the report to the excel. But the report is a report of Sales which containing a grand total amount of the group of records. Is there a way to write a script to achieve this (the grand total amount is not include in the recordset)?
Thanks!
View 2 Replies
View Related
May 24, 2005
Hi,
Suppose I have a recordset as follows:
Order No. Item Qty
001 a 10
001 b 10
002 a 5
Can I export the recordset to excel on seperate worksheet (same workbook) by different order no?
I mean Order No. 001 in one worksheet and Order No. 002 in another worksheet.
Thanks!
View 6 Replies
View Related
Mar 9, 2008
Hello everyone,
Is there a way to automate exporting a Report to excel? Using a button or somthing.
Thank you...
View 1 Replies
View Related
Dec 16, 2005
Good morning all,
First, I know there have been a lot of posts on this topic already, and I've printed out several of them to try to help me solve my problem. However, I'm having a problem getting mine to work.
Here's what I want to do, I am trying to export four different queries into one workbook, separate worksheets in Excel. For example, I have qryControl, qryLocal, qryPar and qryNasco. I want to export qryControl into the CONTROL worksheet in General Ledger.xls, qryLocal into the LOCAL worksheet in General Ledger.xls, and so on and so forth. Can this be done?
I started a practice form and added a command button based on some of the information I read before, just to see if I can get a query to transfer period and I ran into some problems. Here is the code I used:
Private Sub Command0_Click()
DoCmd.TransferSpreadsheet acExport, acSpreadsheetTypeExcel8, "qryWorldWideClaims", "C: emp.xls", True
'Create Excel Instance
Dim xlObj As Object
Set xlObj = CreateObject("Excel.Application")
'Open the template file
xlObj.workbooks.Open "C:mytemplatefile.xls"
'Save the template file with another name
xlObj.activeworkbook.savesas "C:mynewfile.xls"
'Open the temp file we exported from Access
xlObj.workbooks.Open "C: emp.xls"
'Select and copy all the data
xlObj.activeworkbook.cells.select
xlObj.activeworkbook.selection.copy
'Re-activate the destination file
xlObj.workbooks("mynewfile.xls").Activate
'Select cell A1 on the first sheet
xlObj.activeworkbook.sheets(1).range("A1").select
'Paste the data
xlObj.activesheet.paste
'Save and close the file
xlObj.activeworkbook.Save
xlObj.activeworkbook.Close
'Close the other file - assumes no other Excel files are open
xlObj.activeworkbook.Save
xlObj.actoveworkbook.Close
xlObj.Quit
Set xlObj = Nothing
End Sub
I get an error message at the following line:
xlobj.activeworkbook.saveas "C:mynewfile.xls"
The error is:
'Runtime Error 438' Object doesn't support this property or method.
Can somebody please tell me if I can export to four different worksheets in the same workbook and also what I need to do to resolve my error.
Thanks every body!
View 2 Replies
View Related
Dec 22, 2005
I’d like to export ADDRESS field into a cell (or cells) in an Excel spreadsheet based on the DATEkeyed-in a specific cell. There may be numerous addresses for the same date.
Example:
Spreadsheet Cell B7 = 6/12/05
Returns from the tblConstDate Access Table into a cell (or cells) in the spreadsheet:
1206 Wisconsin Ave.
1224 Wisconsin Ave.
1313 Wisconsin Ave.
Thanks,
SKK
View 4 Replies
View Related
Nov 1, 2006
I hope that I can explain my question correctly. I have a form with a subform on it and I was wondering how to export the data to excel. I want the information from both the form and sub form kept together. If anyone understands what I am saying and it possible, then I will post my form.
View 3 Replies
View Related
Nov 3, 2006
hey there,
can someone read this coding and tell me where my error is......it is completing the export but not in the correct file path. essentially this was coding that i had that filtered through a list of qry results adn exported each set for qryresultONE, qryresultTWO, etc.
i've attempted to modify it to just export for the one and only qry result.
Code:Public Function EFCExportProjections() Const FILE_PATH As String = "\my folder location" Dim rsUpdate As Recordset Dim qdf As QueryDef Dim strSQL As String Set rsUpdate = CurrentDb.OpenRecordset("tbl_CostReport_FINAL") Call ExportRStoXLS(rsUpdate, strFullPath & Format((Date - 5), "m-d-yy") & " " & "ReportExport.xls") rsUpdate.Close Set rsUpdate = Nothing Set qdf = Nothing MsgBox "Export Complete"End FunctionPublic Function ExportRStoXLS(rsExport As Recordset, strFilePath As String) Dim xl As New Excel.Application Dim wb As New Workbook Dim ws As Worksheet Dim aryvarRows As Variant Dim intColumns As Integer, intRows As Integer Dim datReportdate As Date, datReportDateEnd As Date 'Is the recordset empty? If rsExport.RecordCount < 1 Then Exit Function End If If Dir(strFilePath) <> "" Then Kill strFilePath End If rsExport.MoveLast rsExport.MoveFirst aryvarRows = rsExport.GetRows(rsExport.RecordCount) 'load array with recordset 'Create New Workbook and select the first sheet Set wb = xl.Workbooks.Add Set ws = wb.Worksheets(1) 'insert title and worksheet name ws.Name = "RecordsetExport" 'enter column headings For intColumns = 1 To rsExport.Fields.Count ws.Cells(2, intColumns) = rsExport.Fields(intColumns - 1).Name Next intColumns 'populate data For intColumns = 1 To rsExport.Fields.Count For intRows = 1 To rsExport.RecordCount ws.Cells(intRows + 2, intColumns) = aryvarRows(intColumns - 1, intRows - 1) Next intRows Next intColumns ws.Cells.ColumnWidth = 20 ws.Cells.RowHeight = 15 wb.SaveAs (strFilePath) wb.Close xl.Quit Set xl = Nothing Set wb = Nothing Set ws = NothingEnd Function
I APPRECIATE THE HELP.
TukTuk
View 2 Replies
View Related
Jul 2, 2013
I'm trying to Export one of my Access Report to Excel, I kept getting this error message.. "There is an Invalid used the Dot, or ! Operator or Invalid of Parentheses..My report is working fine, except when I try to export it to Excel, then this error message pop up..
View 1 Replies
View Related
Jan 29, 2006
in the excel there is just 255 length how and where I can fix it?
View 1 Replies
View Related
