Field Adjustment Under Certain Conditions
Jul 11, 2014How do I set a field to the table so that it will accept only the number 0 or a 12-digit number ...
View Replies
ADVERTISEMENT
Tables :: Field Adjustment Under Certain Conditions?
Jul 11, 2014How do I set a field to the table so that it will accept only the number 0 or a 12-digit number?
View 3 Replies View RelatedCalc Field That Waits For Input If One Or More Conditions Are Met
Sep 12, 2015I want to create a calculated field that If the employment type is FT Hourly or PT Hourly it will have a pop up screen for the Hourly Wage to be entered. If those criterion are not met it nulls the Hourly Wage field.
View 1 Replies View RelatedQueries :: How To Insert Multiple Conditions / Criteria For A Field
Jul 24, 2013I am trying to make a query that outputs the minimum "Need Year" AND ALSO if the need year was equal to 9999 it shows "NO DATA".
This is what I have so far for checking the minimum value:
field: Need Year: MinofList(PMS_output!pqi_ny,PMS_output!iri_ny,PMS_ output!sdi_ny,pms_output!sai_ny)
I am not sure if I should be putting it in the criteria to check whether this minimum value (need year) equals to 9999 or not and if it does, it says "NO DATA" instead of 9999.
If 2 Conditions Are Met Then
Feb 26, 2007I am trying to write a code that will enable an event to happen if 2 conditions are true, something like:
If [DueDate] >= [CurrentDate] And [EndDate] is Null Then
Event ..... take place
I tried above and did not work
it works only if write one condition of above
how can I set it up correctly
Help With Conditions
May 26, 2005I currently have a query which takes its criteria from a form called search. This all works fine, unless the user leaves a field in the search form blank. Then the query has no results.
What I'd like is for a blank field to act as a wildcard.
I guess the reason this doesn't automatically work is that Access (effectively) puts " & " around the criteria taken from a form, so the criteria ends up as " " not (there's a space there!).
I tried entering a criteria in the query that says:
IIF([Forms]![Search]![Date] Is Null,*, [Forms]![Search]![Date]
this doesn't work. For one thing Access edits the * into "*", so it is no longer a wildcard. Secondly, I've never used IIF before, so it's probably wrong anyway...
So, can anyone help me do this?
Even if a blank field cannot be used as a wildcard, any character would do...
IIF With 2 Conditions?
Aug 15, 2007Hi
Hope someone can help with this. Had a search through the forums but nothing quite the same (although I'm guessing it's a simple one to solve.)
I need to calculate a figure based on 2 criteria. The permutations are as follows
If condition A is less than 20 and condition B is No then return 9
If condition A is less than 20 and condition B is No then return 12
If condition A is greater than 20 and condition B is No then return 13
If condition A is greater than 20 and condition B is No then return 15
Any suggestions?
Conditions
Jun 7, 2005Hi, I have created a Yes/No attribute. Im just wondering if a text boxes visibility can be dependent on the result of this. E.g. If a row is set to yes then the text box will be shown and if it is set to no the text box is made invisible. Thanks for any help
View 7 Replies View RelatedParticipation Conditions - How To ?
Dec 21, 2007Hi again :)
Since I am new to Access I am having a problem figuring out how to set the participation conditions (optional or mandatory) for my relationships. I have looked through MS access online and forums, google etc. and found nothing.
I would be very grateful for any help :)
Kind Regards
Marie
Sql Update With 2 Where Conditions
Jan 12, 2005The following SQL statement with 1 where condition works fine, but the Next SQL statement with 2 where conditions does not work, a error message says Run-Time error ‘13’ type mismatch , what is incorrect in the statement when the AND MinID = 15 is added. The table data type in set as number
SQL = "UPDATE MinistryInv2 Set MinID = " & 14 & " WHERE PID = " & Me!ID & ";"
SQL = "UPDATE MinistryInv2 Set MinID = " & 14 & " WHERE PID = " & Me!ID And MinID = 15 & ";"
Phil
Setting Conditions
Jun 3, 2005I have set up a querry that gathers information from different tables:
ID | Name | StartDate | EndDate | NbOfDays |
Then, i am using a form to fill up this querry. Normal stuff.
1- How and where can i set a condition so the input of EndDate could not be smaller than StartDate?
2- How and where can i set up and write the formula that calculates the NbOfDays? (meaning number of days worked form start date to end date)
Thank you for helping!
Multiple Conditions For Form
Apr 11, 2006G'Day:
I have a form that I created that allows the user to input an "ExhibitNo" and then a "PlacingNo" to allow each entry to receive a set monetary amount (based on values in a table).
The "ExhibitNo" has two references linked to it. They are "ClassNo" and "ExhibitorID".
My supervisors want me to make it so that when the "ExhibitNo" is entered on the form that it will not allow a monetary amount.
This is where I started, but it does not work. Does anyone have a better idea?
Private Sub Combo14_AfterUpdate()
Me.Refresh
If [ClassNo] >= 0 >= 5000 Then
If [ExhibitorNo] <= 0 >= 499 Then
If [Placinggrade] = "Blue" Then
[Premium] = [Blue]
End If
If [Placinggrade] = "Red" Then
[Premium] = [Red]
End If
If [Placinggrade] = "White" Then
[Premium] = [White]
End If
End If
End If
If [ClassNo] >= 5000 Then
If [ExhibitorNo] <= 500 Then
If [Placinggrade] = "Blue" Then
[Premium] = [Blue]
End If
If [Placinggrade] = "Red" Then
[Premium] = [Red]
End If
If [Placinggrade] = "White" Then
[Premium] = [White]
End If
End If
End If
If [ClassNo] >= 5000 Then
If [ExhibitorNo] >= 500 Then
[Premium] = 0
End If
End If
End Sub
Thanks
Hide Form When All Conditions Are Met
Jan 23, 2007What I need to do is, not have a form pop up when all the conditions are met. I have 30 some users that log into the db.
I have a form that pops up when the date of the project is past due. to certain users when they log in. I am using the Environ("username") theory, which works very well. But when the user has COMPLETED all the necessary dates, the form still comes up, (but of course it’s blank).
How can I eliminate that problem?
Open Form On All Conditions Met
Feb 9, 2008Hi,
i am trying to open a form if all conditions are met. if the conditions are not met, then they get a flash message and then the user should return to the open form. i have the condition checking working but cannot seem to open the form if ALL conditions are true. i also need to close the form when the new form opens.how could i achieve this? here is my code
Private Sub MidVerifyContinue_Click()
FullNameChk.SetFocus
If FullNameChk = False Then
MsgBox "You Need to have a Full Name to Verify", vbOKOnly, "Message"
End If
If CompNameChk = False Then
MsgBox "You Need to have a Company Name to Verify", vbOKOnly, "Message"
End If
If TradeNameChk = False Then
MsgBox "You Need to have a Trading as name to Verify", vbOKOnly, "Message"
End If
If UTChk = False Then
MsgBox "You Need to have a number to Verify", vbOKOnly, "Message"
End If
If CRChk = False Then
MsgBox "You Need to have a C R number to Verify", vbOKOnly, "Message"
End If
If NIChk = False Then
MsgBox "You Need to have a N I number to Verify", vbOKOnly, "Message"
End If
If PostCodeChk = False Then
MsgBox "You Need to have a Postcode to Verify", vbOKOnly, "Message"
End If
Exit Sub
DoCmd.OpenForm "New Verification Qry"
End Sub
many thanks,
Nigel
Select Query With Conditions
Aug 9, 2005Hi friends,
I had two tables parent(f1) , child(f1,f2,f3).
I had to display f3 value for parent(f1) when f1 has only one f2,
if f2 values are more than one for single f1 and if all f3 values are 0 then
i should display f3 as 0, else if some values for f3 are nonZeros and some are Zeros then
is should display f3 value as '-'.
How to do this?
please any suggestions?
Thanks.
Query With Conditions By Date
Aug 9, 2007I am so frustrated right now that I could scream. I have a database which tracks attendance and referrals for a networking organization - it meets weekly on Thursdays. It has a report which displays totals of both attendance and referrals for each weekly meeting for an entire month. The problem I am having is related to the fact that some months have 4 Thursdays and some have 5. If I get my queries to display the meeting dates correctly for the 4-Thursday months, then it displays incorrectly for the 5-Thursday months, and vice versa.
Is there any way to put a criteria on a missing record? If I could have it just populate the 5th week with spaces or null when it doesn't exist for that month, it would make my life a lot easier.
I can send a copy of the database to anyone who thinks they can help. It's too big to post.
Input Mask Under Various Conditions
Nov 30, 2005Greetings,
I am a little stumped in logic again
What I am trying to do is the following
If the value is on field is say "OA" then I need an input code of LL0000 or LL00000 in the next field
If the value is say "OT" then I need an input code of LL etc
What is the best way of going about this.
The code is for stock locations in a warehouse.
~rbinder
How To Check More Than 3 Conditions In A Query?
Mar 23, 2005I have a filed and I want to find out its length then in the next column i have to add the data like if filed 1's length is 1 then it should be 000+field1.value, if it is 2 then 00+field1.value, if it is 3 then 0+field1.value and so on...any help is appreciated , thanks
View 2 Replies View RelatedModules & VBA :: How To Do Multiple Conditions
Nov 6, 2013how to do multiple conditions, Nested....I have 6 conditions that i like to check,
Code:
if (condition-1) And
(condition-2) And
(condition-3) And
'[code]....
Modules & VBA :: IF / Then With Multiple Conditions
Sep 10, 2014I'm trying to create an If/Then statement that needs to match to multiple values. My initial thoughts were to create a list but that doesn't seem to work the way I thought it would.
For example:
If Me.Field = 1,2,5, or 8 Then
Do 'X'
Else IF Me.Field = 3,4,6 or 7 THen
Do 'Y'
Else Do 'Z'
I haven't been able to get the syntax to work right. I'd rather not have to do 'Me.Field = 1 or Me.Field = 2, etc.' but if that's the only way to have it work right, then I guess it'll have to do.
Forms :: SQL Statement With Two Where Conditions
Aug 19, 2013I cannot get the correct syntax for this. The punctuation for the second where condition is incorrect.
Code:
Me.cboDose.RowSource = "SELECT Label FROM tblLookup WHERE tblLookup.[Med]='" & Me.cboMed & "'" AND tblLookup.[Notes] = "Swallowed"
Multiple Conditions In Access
Apr 3, 2013I am trying to calculate [current status] based on multiple conditions. for example
Current status = A , if (w>0 and x=0 and y=0 and z=0)
Current Status =B , if(w>0 and x>0 , y=0 and z=0)
Current Status =C , if(w>0 and x>0 and y>0 , z=0)
Current status =D , if(w>0 and x>0 and y>0 and z>0)
Where A,B,C,D are text values and w,x,y,z are dates
Query With 2 <> Conditions On Different Fields Not Working
Jan 23, 2008I'm trying to get this query to return all records except those with category: 4 AND issue: 12
Instead I'm always getting ZERO category: 4 and ZERO issue: 12
Should not the parenthesis force this to be taken as a single "WHERE"?
SELECT ASSIGNED_TO, COMPLAINT_NUM, DATE_RESOLVED, CATEGORY, ISSUE
FROM tmptbl_tm_YTD
WHERE (CATEGORY<>4 AND ISSUE<>12);
Open A Form Depending On Conditions
Feb 21, 2005I have a search form, that can be opened by both my "product_enquiry" and my "edit_product" form.
When you select a value on the product search form, i want it to open another form at a specific record.
Easy you might think, but what If i want it to work out which form to open.
So if: A button on Edit product was clicked on to open product search, the value found in product search should be loaded into edit product.
But if it was a button on product enquiry, the record should be opened on the product enquiry form.
Can anyone help?
Requery Form With Previous Conditions
Feb 28, 2005It's easiest if I take you through step by step. I open a form with a list of students and I have to enter the condtion for a Tutor Group (say I type in 13EN). The form then loads up with all students in 13EN. Then I have a 'Add Student' button which loads up a form with an indivudual students information qith a blank record. Then I press a 'Done' button which closes that form and requeries the Student List form.
My problem is when I requery the form I have to re-enter the condition for 'Tutor Group' i.e. I have to type it in again. Is there any way I can refresh the data from the conditions I have already entered (i.e. for the Tutor group, 13EN) without having to type it in again?
Thanks
Copying Records Based Off Of Conditions
Jul 8, 2006Hello. Can this be done?
I am creating a mini scheduling program, and I have one table that handles all requests (tblRequests), then a second table is the final schedule (tblFinalSchedule). On the table for the requests, I have a field called "locked" that is of type yes/no. The purpose of this field is for a meeting time that is of uptmost importance and that I don't want the program to manipulate it in any way.
Is there a way to program in VBA so that when a button on a separate form is clicked, those records that when the yes/no field is checked (set to true), are copied into the appropriate fields from tblRequests into tblFinalSchedule?