I have a list box which contains a Field list of all the fields in a query in my database. Is there any way in which I can exclude a column from this list? Each record has an AutoID which I don't want the user to see, but this appears as a field.
Thanks in advance,
Gary
In my access form I provide the user a list of locations from various countries in a listbox . But the list is too long so I provide him a combobox for selecting a country. Selecting the country should update the listbox showing only the locations in that specific country.
So my SELECT from the listbox must cover the unselected state and show all entries and when a country is selected it must narrow the selection.
I tried to get this happen with the following SELECT statement containing a variable. Choosing a country in the Combobox results in a change of the variable and in a requery. This works after the first country is selected and for each country change, but the initial list is empty.
VBA in the loadform
'Application.TempVars.Add "varcountryselect", "*"
SELECT in the listbox "lstlocationsperproject"
SELECT tbllocations.locationID, tbllocations.country, tbllocations.localstreet, tbllocations.localcity FROM tbllocations WHERE ((tbllocations.country) Like [TempVar]![varcountryselect]);
VBA in the combobox
Application.TempVars("varcountryselect") = [Form]![kombcountryselect].Column(0)
Me.lstlocationsperproject.Requery
The values in [kombcountryselect].Column(0) are texts like "SPAIN", "MEXICO", etc.
Any hints, how I have to use the * for getting the complete list on the initial view ?
Okay,
The subject is probably confusing but I'll try to explain.
Setup:
Table1
FieldID = Number
FieldName = Text
Table2
FieldID = Number
FieldName = Text
T1_ID = Number
Relationship
Table1.FieldID 1-> * Table2.T1_ID (one to many)
Now, I'm trying to create a 3rd table that has field populated by Table1 and a field populated by Table2 but I want to limit the field populated by table2 by what is selected in the field populated by table1.
Table1:
1st
2nd
3rd
4th
Table2:
1st,January
1st,February
1st,March
2nd,April
2nd,May
2nd,June
3rd,July
3rd,August
3rd,September
4th,October
4th,November
4th,December
Table3:
Table1Field = Number, ComboBox-Source: Table1, BoundColumn=1
Table2Field = Number, ComboBox-Source: Table2, BoundColumn=1
If Table1Field = 1st then
Table2Field Will only allow January, February, or March as selections, since ONLY they are a member of the "1sr" group via the table1 list.
Is this possible, or do i have to do some run-time checking or something?
Thanks
Jaeden "Sifo Dyas" al'Raec Ruiner
Hi All a newbie here so any help will be appreciated,
sorry for the long post but trying to give you all the information you might need.
I wrote a basic access database for my Church to aid in a paperwork audit for a charity food drop which we do monthly to give free food to the needy.
But each month it gets harder to find out who was in line first so I thought with all your help we may be able to randomize the names each month in a different order as to avoid confusion and also avoid people waiting in line as they turn up at 5am and we don't start until 9am.
So if this will work in access they can all come for 9am
I don't mind creating a new database and adding the additional information, if that's what it would take.
My Background I have created basic databases from scratch not using wizards, But I don't know much about code or how to implement it so any help in where code goes it would be very much appreciated.
Database details (Microsoft Access 2002 version)
Table Name = details
Field name = ID (auto-generated)
Field name = FirstName (text)
Field name = Surname (text)
If possible it would be nice to keep a record of the randomized lists (in the database somewhere ?) each month in case anyone wants to see it or disputes the lists, where I can just create a report to show the details.
There will be approximately 90 to 125 names.
Thank you in advance for all your help in this matter
Britgent
I have created my tables and form and am now trying to run reports to organize the data. I have figured out how to group the individuals by group and treatment, but can't figure out how exclude individuals from the final list if they are already in another. As background, some of the individuals are eventually excluded from the experiment, though I keep the initial data. When the exclude individual checkbox is checked ("True" on the report) I do not want the individual to be listed in the "False" list, even though there are entries for that individual when that checkbox wasn't checked (when it was "True"). This is so I can get an idea of the current totals in each group.
Implant Period
>Treatment
>>Exclude individual?
>>>Individual ID
I feel like this should be a fairly simple task, but I cannot figure it out... Maybe there is coding to exclude individuals from the "False" list if they are already listed in the "True" list?
Allen Browne's "Use a multi-select list box to filter a report" solution, in particularly with two multi-select list boxes? The code works fine for me for either box so long as I code it for one box alone. Combining the two into one code results in a type mismatch error. I'm trying to use the code to pass the contents of both multi-select boxes as Where conditions to a report. Both boxes are based on number fields. To try to isolate the problem, I've removed Allen's setDescription and OpenArgs conditions. We're unfortunately still on Access 2003 as the company desires to squeeze every dime by using until end-of-life next year.
Code:
Private Sub cmdPreview_Click()
On Error GoTo Err_Handler
'Purpose: Open the report filtered to the items selected in the list box.
Dim varItem As Variant 'Selected items
[Code] .....
I have created listbox with one column (contains one column only), now i would like to display all the characters of list item (want scroll bar to listbox).
How do i display all text of list item, I have already fixed Column Widths to max length (22";0.1"). However when scrolling to right, it is going to next blank column of list box, which is created only to change Column Widths property.
I'm looking to move an excel sheet to access because the row counts are too much.The main thing it does is compare the supplied data against a list I hold in the sheet.There are not duplicate records, however..Some data is a direct lookup for a full match, but much of it is a count to see how many records contain a certain string.
I have 500 keywords which have a countif function in using wildcards.I need to create a query/report which will return a list of records from the original list which contains each keyword featured and how many times it features.I was going to do it in PHPmysql but the time it took to parse a million records for every keyword made it pointless.
eg:
keywords:
look
billy
magic
list:
"have a look and see"
"spanish dave"
"who is billy brag"
"looky looky I go hooky"
"who's the man from argentina"
"could it be magic now"
my spreadsheet would return a 1 next to ""billy" and "magic" and would put a 2 next to "look".
the sheet has the keyword in each row and next to the column:
=COUNTIF(list,CONCATENATE("*@",B13))
where "list" is the external data.
How To Transfer MultipleSelect Item In Listbox to another Listbox ?
View 7 Replies View RelatedI created a form and created on it a list box which is a query that grabs certain number of fields from different tables. I would like the user to select from this list box of a choice and then store their selection into a table.This list box has three fields, but it needs to store the id rather than the item, the user would see the name of the item but the id of the item would be store into another table, called bid. It store all these three fields when a user selection one of the item from the list.
View 13 Replies View RelatedI am wanting to preempt data in list boxes
listbox1
Fruit
Vegetable
listbox2 (If Fruit Is Selected)
Apple
Banana
Orange
listbox2 (If Vegetable Is Selected)
Potato
Peas
Carrot
If Fruit is selected in Listbox1 - Then Listbox2 should have the options
Apple
Banana
Orange
If Vegetable is selected in Listbox1 - Then Listbox2 should have the options
Potato
Peas
Carrot
I have a Form that links to a List Box which pulls from a combined (concatenated?) list. The list it is pulling from appears as follows: SELECT [Rank]+" "+[Last Name]+", "+[First Name] AS Expr1 FROM [T_Personnel Information]; My issue is that the Field in the Form that pulls from the Field in the Table defaults to the first name on the list when left blank, where as I want it to default to a blank value unless I select a name from the list.
View 1 Replies View RelatedI have a form with 2 list boxes, part number and modification. There is a subform containing another list box that is supposed to show the part information (bpn,vendor,status,etc.) that corresponds to the selected part number/modification in the parent form list boxes.
The part info list box has multiselect enabled and what i want to is be able to select multiple line items and press a button which then sets all of the selected line items status to "Request Removal". This is my code for the button:
Private Sub removeButton_Click()
Dim varItem As Variant
With Me.acbModList
For Each varItem In .ItemsSelected
MsgBox (Me.Status.Value & Me.[Part Number].Value)
Me.Status = 6
Next
End With
End Sub
The msgbox was for debugging purposes. Here's my issue; the for each actually does iterate through each selected item but the value for the line item doesn't change along with it. For example, when I selected 3 items, the msgbox will pop up 3 times but each time will have the same information (first item in the table) even when that item isn't selected.
My next issue is that I am receiving an error message with "Me.Status = 6" stating "You cant assign a value to this object". 6 refers to the id of the status i want to set it to.
How to populate a list box using another list box on the same form. I have this working completely fine if the the source list box has the multi select property configured to be off, however I need it to be set to extended multi select.
View 1 Replies View RelatedI have a list of manufacturers & a list of their distributors. The relation is many to many. How to build one or two tables & to select correctly the primary key.
Thanks
I’m developing a claim tracking database that tracks dates of events that occur in the course of processing a claim; such as, Loss Date, Report Date, Estimate Date, Payment Date, etc. There are 16 different “Events” in all.I currently have the following tables set up:
tblClaim
ClaimID
ClaimNumber
fkEmpID
tblEmployee
EmpID
EmpName
[code]....
What I need to do is create a form where management can choose two or more events, and calculate the average number of days between two of any of the events, for an employee, or all employees.I have created a crosstab query to change the values in the EventName field in tblEvents to field names, and the EventDate as values for the related EventNames. I created another query based on this query to do the DateDiff.
I created combo boxes on my form with the Row Source Type set to Field List, for a list of fields in my crosstab query. I’ve tried to use the following DateDiff function to get the days between the two fields selected in my combo boxes:
Code:
DateDiff("d",[Forms]![frmReportBuilder]![cboEvent1],[Forms]![frmReportBuilder]![cboEvent2])
But I get an error about unrecognized field name or expression for my combo boxes. So I added my combo boxes in the query parameter window, with a data type as both text and value, but with both I get an error “This expression is typed incorrectly or is too complex to be evaluated.” I also specified the column headings in the crosstab but I still am getting the “too complex” error.I’m pretty sure it’s trying to do a Datediff on the literal values in the comboboxes and not recognizing that I’m trying to specify field names.Is it possible to assign field names in DateDiff this way?
Okay, I'm not sure if this is possible, i'm just spitballin' here, so bear with me.
I have a table that has the names of all the months (January - December) and it is linked to a second table that has three fields, 2 of which are populated by field names of a third table.
Table1:
MonthID
MonthName
Table2:
Month
MonthCount (Text, populated by FieldList Table3)
MonthCost (Text, populated by FieldList Table3)
Table3:
Jan_Count
Jan_Cost
Feb_Count
Feb_Cost
etc...
Now I would like to do a query that does some aggregate functions on the specific fields in Table3 based upon the values in Table2. Something Like This:
Query:
Source: Table3, Table2, Table1
Table2.Month, Sum(Table3.[Table2.MonthCount]), Sum(Table3.[Table2.MonthCost])
So I would get a list:
Januaray 200 $1000
February 320 $2300
Etc.
Can I do that?
Thanks
Jaeden "Sifo Dyas" al'raec Ruiner
I do not have the option to refresh my field list in Access 2003. I am tring to add a new field in my table and then update it in my form. I do not see the toolbar on the top of the field list window, like help said. Please help this has been bugging me all day. This is what help shows me.
Refresh the field list of a data access page
If you're working in a multiuser environment, or if you modified an underlying table or query after opening the page, you might want to refresh the field list of the page.
If the field list is not open, click Field List on the toolbar.
Click Refresh on the field list toolbar.
Thanks
Hi
on my form i have unbound list box with 10 items.
Below are several fields bound to a query.
I would like to be able to double click an item from the list box and sent it direct to a specific field.
I don't want that specific field to have a combo box of the listed items above, is this possible and how do i implement it.
thks.
Does anyone know why I cannot select the "Field List" to display the fields from a Table on a Form with the Tab Control Added.
I can select the "Field List" from a simple form with nothing added to it. But as soon as I add the Tab Control I cannot use the "Field List"
Thanks......
Hi
I am using Access 2002 SP1 and have created a pivot table based on a query which works fine. However if I change the structure of the underlying query by adding another field, the field is not availabe in the Field List in the pivot table. I have used the refresh option but I understand it only applies to the data.
Any ideas?
How do I add fields from a different table when constructing the form?
Thanks in advance.
John
In my list box I have two coloums, Surname and Christian Name, now can I get both names to go into a text field. I can get one of the names i.e surname or christian name by changing the bound coloum from 1 to 2. But I need both names to go across?
View 2 Replies View RelatedAll,
I wish to create a custom form to link into my tblData table, however when I open a form in design view, the field list is not displayed. I have tried to select it from the toolbar but the button is not available ('greyed out'). I know I have done this before but can't remeber how.
Any help please would be great?
JB
When you use a Yes/No field in your table and then want to have another field that will allow the user to list if yes...
_______________
Example that will be used in my form:
Are there any dependencies? Yes/No (they will choose from a drop down, yes or no)
If yes, please list dependencies: ??
_______________
How do you set up the if yes field in the table? I want it to be able to have it show as a list, not as one long text field with everything seperated by commas or semi-colons.
Is this possible?
Hello,
I have a form that I need to modify. Currently, the field list shows Query 1 as the 'control source' for the text boxes on the form and I need to change to use Query 2 but I am unsure of how to do this. Do I have to delete the test boxes and start fresh or can I change the field list and use Query 2 as the source?
Thanks for any help.
JTP