What i want to do is if a user forgets to put lets say Address or Zip
Will not allow user to save record but instead will highlight the text boxs
that are required. Once data is put in will allow user to save record.
How can I force a field in a form to be updated before the record is saved / changed?
For instance I have a form with information on it and I want to ensure that any time the form is updated the user fills in a section providing the date and by who it has been updated by. I dont want the record to save unless that information has been filled out, and I also want it to take you to the field if you press save and it hasnt been filled out along with an error message.
To try and be a bit clearer. At current I have a Save and New button. This saves the form if dirty and opens a new record.
I want to add in the step that if record has been changed and FieldA has not just been updated then go to fieldA (Showing a message box). If FieldA has just been updated then save record and open new as normal.
My current save & new button properties are as follows (in Macro Editor)
On error Go To Next If [form].[dirty] RunMenuCommand Command SaveRecord End If If [MacroError].[Number}< >0 Message =[MacroError].[Description] Beep Yes Type None Stop macro On Error Go To Fail Go To Record Record New Go To Control Control name Resort Code
I have designed a database that has two forms as inputs to a table. The first form is a checklist and when it is completed it saves all fields except the ManagerID field. I then use the blank ManagerID, clientID and Date to pull onto a form for the manager to complete. On completion I want the ManagerID to save into the current records so they do not show up in the manager checklist forms and I then have a complete record. I have been searching online and cant seem to see how the best avenue is. I have an append query, see below
Code: INSERT INTO ChecklistResults ( ManagerID ) SELECT ChecklistResults.ManagerID, ChecklistResults.ClientID, ChecklistResults.DateCompleted FROM ChecklistResults WHERE (((ChecklistResults.ClientID)=[Forms]![TeamLeader]![ComClientNotFin]) AND ((ChecklistResults.DateCompleted)=[Forms]![TeamLeader]![ComDateSelect]));
Code: Private Sub CmdAppend_Click() Dim dbsNorthwind As dao.Database Dim rstAmend As dao.Recordset Dim qdfAmend As dao.QueryDef
I have created a Form based from a Table. On one of the fields, I need to be required inside the Form before moving to the next record of that form. I can not make the required field in the table, because I have to append information day to day.
Also, the required field is a combo box option that is limit to the list.
What kind of Code I can do inside the form of the specific field to make it required before clicking onto the next record. It does not matter if the processor closes out of the form before updating, only if moving to the next record.
I'm writing a course registration Db. I have a have 3 tables at the moment tblContacts [ContactID], [FName], [SName], [Etc..] tblCourseRegistration[RegID] [ContactID][CourseID] and tblCourses[CourseID] [CourseName] [Etc...]
These are all linked on a tabbed form. I have found that the same Contact can sign up for the same course twice. I need to stop this happening. Is there an easy way to prevent this or do I have to write a query that runs before the save command to prevent this?
I have a split database (A2000) on a server; many people use the database at many different terminals. I would like to save the computers identification to the record being created. Any ideas on how to accomplish this? Thanks gMAC
I have a Multi user Access Database which has been split into a Front and Back end. What I am noticing is sometimes when the user enters data into the Front end form, it is not being saved in the Backend tables....
How to confirm when the user clicks save that the data is actually being saved in the backend tables.
When using Access 2007, I have a new record button, but that record is only written to the db once you navigate away from it. How do I write immediately to the DB, so that record is saved without navigating away from it. I believe I can use ADO or DAO but I'm having difficulties.
i want to have a button where the operator can cancel when on a current record. i want an if. if form has changes made but not saved then undo else close.
I'm working on a "Product Details" form somewhat similar to form in northwind, which the record source in "Products" table. what i'm trying to do is after clicking "save and new" command button to go to new record in form, i would like all text boxes to automatically retrieve the value from last saved record set as default value.
after google searching this subject i found the LastModified Syntax but i just don't understand whether i use it in VB or marco, or even how to implicate this. Should I make macro on each txtbox or should i create module? if i have to create either macro or module.
I'm currently building a bookings database and have encountered an alert message that I cant seem to rectify -
"You cannot add or change a record because a related record is required in the table 'Booking Details'"
Basically - I have a 'Customer Database' form that is linked (via command button) to a 'Booking Details' form. Within 'Booking Details' I have 2 sub forms - 'Booking Quote' and 'Booking Payments'. Both subforms are linked to the 'Booking Details' form by the 'booking ref' field with RI.
I have no problem updating information in the 'Booking Quote' subform, but when I try to add information to 'Booking Payments' it states the above message.
Can anyone please advise as to how I can prevent this happening? I'm slowly losing my mind....!!!
Currently I keep getting this error: "You cannot add or change a record because a related record is required in table"..My current tables are this:
Primary Table with persons info:
Primary Key - Auto number generated Name Address Email Phone
I have 4 other tables with use check boxes.
ex:
Table 1 - Geographic locations visited
ID - Auto generated USA CANADA ASIA ECT...
Table 2 - Languages Spoken ID - Auto generated Spanish Chinese English
Table 3 - Skills ID - Auto generated Hunting Dance Singing Weaving
Is this not a genuine one-to-one relationship table? I mean No two people would have had visited the same places and speak the same language no? I tried to create a one to one relationship with the primary key to the auto generated ID of the child tables but I'm sure that is not how you do it. Also when I try to save the check boxes in my form and I close it and come back it doesnt save and is blank again. Is it because my form gets its information from a query that takes all the information from all the tables.
how I can get this to work properly? Am i to make use of a foreign key? I've read a lot about it online and watched youtube videos but I dont see why I need it here in this case. Is there a way to set the IDs in the child tables to be the ones from the primary table? Or do I have to use a foreign key and manually input the primary ID into them?
Or would it be better to have all these child tables in the primary table and have one large table instead? I just didnt do that because one of them has like 20 checkboxes with cities and locations
I have a problem with my access form, it said "You cannot add or change a record because a related record is required in table". I have attached the access file.
I have a form with my own navigation buttons. The problem is a AddNew button is clicked for a new record, but it automatically adds into the relevant table when I click on the MovePrevious and MoveFirst button without data entry.
Has anyone encountered such problem? Kindly help me.
Hi all, I've got a subform, fed by a query which contains a lot of calculated fields. All the calculations use the contents of a field on the main form.
What i want to do is have a live update, so that if i change the value of the field on the main form, the subform is requeried and the fields recalculated using the new value.
I've put a subform requery on the On Change event, but the requeried fields are coming out the same, presumably because the new value i have put in is not saved until i change record.
I'm using the control name in my calculations, and yet it's still picking up the old (saved) value from the underlying table - is there no way to tell Access to look at what resides in the control right now?
Can someone help me out by looking at my database I've been messing with it for 3 days and I can't figure it out. I have 4 tables each are in a 1 to 1 relationship. From there I have a query that is for every field between the 4 tables. I then have a Tab Control form with 4 tabs and it uses the qryAll I have setup. when I enter on the form I can enter info on all 4 tabs but if I try to go to a different record I get the message "You can't add or change a record because a related record is required in tblScouts". I have tried so many different options. I had even posted yesterday trying to do the same thing but my tab controls had subforms on them. The_Doc_Man was helping me with that issue but I couldn't get that to go either. Would anyone be willing to look at it for me and explain to me what I was doing wrong?
ClientsID (PK) blah blah Information and Referral (a check box) blah blah blah blah
ClientIR (the form that opens up when I & R is checked)
IR ID (PK) ClientsID (FK to the above form) Requests (a lookup referencing to IRCategory)
The code is set up so when the I R box is checked, form will open, and unchecking it will delete the I R record of that Client.
The problem is when the IR Box is already open, the request has been selected, I cannot save it as Access says a record is required in the Clients form. There are only two buttons, one goes on to next requests (one client can have more than one requests), other saves and closes.
The Client form is already coded so it will save the Client's record before opening the IR Form, and either button will save the IR record as well.
I had referential intergrity turned on. Turning it off only gave me weird results (I was able to input records, but Access didn't autofill the ClientID in the IR records, and looking at Clients returns a blank IR record)
I have a piece of code that I'm using to display an image on a report based on a path saved to each record. the code is:
Code: Option Compare Database Private Sub Detail_Format(Cancel As Integer, FormatCount As Integer) If IsNull(Me.ImagePath) Then Me.ImgPic.Picture = "O:BellinghamIntranetProductionLabelsNo Label.bmp" Else Me.ImgPic.Picture = Me.ImagePath End If End Sub
It seems like every few months the code crashes access and then never works again. When I debug, the part that is highlighted is:
Code: Me.ImgPic.Picture = Me.ImagePath
The only way i've found to correct it is to delete the report and the module and copy them back in from a backup database. What could be causing this code to crash or how to stabalize my database to prevent this from happening again.
In my Access app I need to get the latest record added of an item from a MS Sql table and check the period between now and the date saved in the record.
So my guess is: Select TOP 1 * from tbl_StockItems Where StockId = Loc_StockId
I then need to check the days between tbl_StockItems.LastStockDate and Today.
How would I write an Access VBA query to give me the amount of days and put that number into a variable.
A have a query that selects a multivalue field. The query forms the record source for a subform. The text values in the multivalue field are displayed in the query, but when I save this and view the data in the subform datasheet view the values revert to the primary key values. They are 1,2,3,4 instead of the text values
I am trying to do something that I would think is very simple but I'm having a hard time with it. I have a form that consists of questions that the user is needed to answer. It displays the question, a combobox where the User can select 'Yes' or 'No', and a textbox where the user can input their comments. What I would like to do it the following: if the user selects 'Yes' as an answer, I want the corresponding comments box to be required.
Hi. I want to have all my fields on my form to be required and so that the user cant close the form if they are empty (error message). In the table properties I have them set to Required an have tried putting in a validation rule of IS NOT NULL but it still dont work. any help appreciated. thanks