I am making a manual for work using access to save all the commands we use. I have a drop down box to determine the command. I want to have fields users fill in and system adds to commands and displays output on screen. Example INFO1 and INFO2 would be what person added in a box. I want the output to be able to be copied as full line.
RTRV-T3:INFO1:INFO2:<CTAG>;
I have taken some basic Access and SQL classes. Is there a way to do this in Access.
using Access 2000.I have a table with fields (image, info1, info2, info3).I want to produce a report where 15 records are displayed in a table like manner. each table cell contain the whole record and the table is 5 rows by 3 columns.
See my 2 attachments. I put the Pop-Up property on the form. that worked but still not what I want.
On the HATT attachment do you see how it opens in the middle of the screen? And the other opens at the top right, (and has that tab at the top right that says frmMain)?
how do i made the airwatch open in the middle? like the other screenshot?
I am fairly new to Acces 2010.I have two seperate tables hat I need to use to compare data. As you can see table A and table B have some of the same item numbers but they also have different item numbers that are not other table. Also some of the item numbers are duplicated in each table but that is okay because the cost of the item is different. Both tables contain item numbers for the products. I want all of Table A item numbers including the item numbers that are in table B. But I also want Table B item numbers except for the item numbers that are also in Table A. In the real raw data file some of the item number fields are blank but the other fields have values. How should I query these tables so that I achieve the correct results?
Table A Item Num Costof Item Supplier Sales Tax Purchase Month 1234 $1.00 Walmart $2.00 Dec 2013 2222 $4.00 Walmart $1.00 Dec 2013 2222 $2.00 Walmart $1.00 Dec 2013 1276 $3.00 Sams club $1.50 Dec 2013 7898 $5.00 Texaco $5.00 Dec 2013 4567 $3.50 Food Lion $1.00 Dec 2013
i have problem to how to make such a invoice report which in sub report detail have a vertical line per column for each page, and every sub sum in detail can continue for next page, any one can tell me how? i really appreciate if any one can give me some exampel. i had looking in microsoft forum for example but i it just for calculating per page which does'nt have sub report and explaining about vertical line in detail.
First of All i want say Thank you for All your Kindness.
i'm trying to send an Outlook e-mail from Access. Everything works fine except for one thing:
When generating the HTMLBody I use vbNewLine for starting a new line in the string that works fine as long as being in Access. However after displaying it in Outlook there are no any new lines in the mail text; the complete text is one mass.
I have a table that tracks call-in's and tardies. Sometimes, a person will have a tardy and not a call-in and vice versa. I need to perform a calc on both the call in and the tardy fields. Is there a way to tell the database that if [Tardies] is blank (nulll), that I want it to put a zero in the field? I know this must be done by a query, but can't figure it out.
I've also tried splitting these two tables into a call-in's and a tardies table, but can't get a query that will show all tardies AND all call-in's. It will only show either all call-in's with associated tardies or vice versa, so if a person has no tardies, but does have call-in's it won't show them. What can I do? Thanks!
I am using Access 2010 and I have a table containing a list of chemicals (Analytes) that I am working with and their Chemical Abstract Service number (CAS). I am trying to use this table as a basis for generating other tables that will be used to create quality control criteria for specific analysis methods. As such, I will need both fields populated for each subsequent table. I have been able to successfully create a lookup that will pull the Analyte name, but I want the same lookup to fill the CAS number. How do I make this work?
i am the biggest of all newbies when it comes to access and understand only the graphical parts of the process (no SQL knowledge etc.).
how would i go about auto filling a certain field based on what's in another field? for example, i have a field called TimeZone that i want filled with either West, East, Central, or Mountain based on another field for State. can i build a query to automatically take care of any empty fields for TimeZone that haven't already been filled out by me manually?
if i need to use SQL, that's fine too as long as the directions are clear and precise as i have no prior knowledge.
I have a form "Admin" used to create new records in a table "RCJ"
I have a table called "Projects" that contains detailed information for projects.
I have a table called "Waterfall" that contains basic information and schedule information for each particular project.
I have a combo box "Contract" that selects information based on a query "Core" that gathers certain information I want to use of form "Admin"
I understand it's generally not a good idea to duplicate data in tables, but for specific reasons I am here. My combo button "Contract" has an event "On Click" that gathers information I want copied from table "Waterfall" via query "Core" is:
Private Sub Lookup1_Click()
Me![Project Description] = Lookup1.Column(1) =>goes to a text box Me![TContract] = Lookup1.Column(3) => goes to a text box Me![Requestor] = Lookup1.Column(5) => goes to a combo box Me![AEM] = Lookup1.Column(4) => goes to a combo box Me![AE] = Lookup1.Column(6) => goes to a combo box Me![Priority] = Lookup1.Column(12) => goes to a combo box End Sub
Now, the items listed above are sometimes just a text box and sometimes a combo box (because there are times, when items get entered that don't fit the original combo box.
Now, here's the rub. When I select the pull down on the combo box it lists all available projects. You find the one you want and select it. At that point, only Columns 1 (text box) and 6 (combo box) auto fill. The other information does not fill in .. BUT, if I more to the prior record and back, all information shows up OR if I click on any of the particular fields, the information shows up in that field. In theory, everything should show up right away.
I thought it might be because it doesn't like to autofill a combo box, but one of the combo boxes fills fine. And all of the information is acutally going to the various boxes, it just doesn't show up right away.
The database I am building is for Student & Alumni administration at a non-profit culinary school. In the various forms for entering student information and for defining tests and recording test scores, I would like to not have to re-select things like Class Number or Test number.
I was able to use the Test Number field as Link Master, Child in a Test Results sub-form where Test Parameters is the Master form. But I am not able to link with the Class Number, getting the error message: "The setting you entered isn't valid for this property" even though it is one of the Suggested Link Fields. The form record source is a query linking the Class Table, Test Parameters, Test Results and Students.
I noticed that I can eliminate both Class Number and Test Number from the sub-form. In the underlying query, both these fields are updated. However, the underlying Test Results table does have the Test Number but not the Class Number. While there is still a "queryable" link from the student to the Class Number, I would very much want the Class Number to be stored in the Test Results table.
Is there a way to accomplish this through the sub-form Link Master/Child property or any other/better way to inherit both the Class Number and Test Number in each Test Results record entered?
I have a database and one of the functions is to track the purchase of fuel. Part of purchasing fuel is registering what the current odometer reads. My query gets the Vehicle ID, Date of Transaction and Odometer reading. I want to show a report that shows how many miles the vehicle is has traveled for a certain amount of time. If it's for 2013 then I'll put the criteria for 2014 in the date. This will give me a list of all vehicles and their odometer readings. I then sort the date by ascending.
In the report I group on vehicle ID and then I want to show all their transactions and add up how many miles were driven.
Vehicle 1
1/2/201 1/5/2013 1/15/2013 ETC... Total Miles Driven in 2014: XXXXXX
I have a main report / subreport relation, just want to have a fixed length of each printout. e.g the total number of lines of the subreport should be 8 lines. However, lots of subreports contain records less than 8. I would like to know how to insert of blank line in the subreport depending on the records with content at each print, in order to make the total number of lines in each subreport is 8 each print!!
I have a table where I use 3 date fields in, all with different views.
Field 1: Date as dd/mm/yyyy Field 2: Quarter: q (shows the same date, but then as quarter of the year. Field 3: Year: YYYY
Now I have a form that fills all of my fields, but is there a simple way () to populate the other two fields Quarter and Year from the value I entered in Date? So if I change Field "Date", Fields "Quarter" and "Year" updates as well.
Maybe I don't need to do it in the form, but in the table?
I'm not that good with VB- scripts, and I'm not sure If it is possible to auto populate the table field Quarter and Year directly in the table itself.
I have a form to record student information. On my student table i have a school I.D that links to the primary key of my school table.
My problem is that in my form, i want to be able to fill in the rest of the fields about the school info based on the I.D chosen.
i.e.
student table: Student id name address school I.D (FK)
School info table: School I.D (PK) school name contact name email address
My form that's linked to the student table needs all the information from the school info table in separate fields but i can only select School I.D in the Control Source Property.
OK, so I have a database with four tables (Well, more than that, but these are the relevant ones). It's to be used for recording the results of site inspections.
"Tbl_Typicals" is a list of products. We'll call its key "Typical_ID". "Tbl_Actions" is a list of tests performed on each product. A given product may have many tests, but each test applies to only one product. Its key is "Action_ID". Each row contains a Typical_ID to link on. "Tbl_PlantComponents" records which products are installed on which site. Its key is "Component_ID". Each row contains a Typical_ID to link on.
The fourth table ("Tbl_Results") contains the results of each test. As a result of the relationships above, each row is specific to a single Action which applies to a particular PlantComponent, which is to say, each row has both a Component_ID and an Action_ID to link on.
So, what I need is a query that pulls all of these together, such that I can use these details as the line items of a subform.
The main form displays the details of the PlantComponent, which is a simple query to relate line items in Tbl_PlantComponents with the data about that particular product in Tbl_Typicals. So far, so easy.
The subform shows the details of each test applicable to that product. It then has toggle buttons and a comment field to indicate the results of the test, the results of which should be stored as a line item in Tbl_Results.
The "easy" way is to use an append query to generate Tbl_Results in advance. This works, but it raises a variety of new issues.
The nice way would be to use a normal SELECT query and have Access fill in the necessary linking fields (the Action_ID and Component_ID) on each row automatically. Now for trivial examples, this is very easy - my main form query manages just that: I created a link between Tbl_PlantComponents and Tbl_Comments (which stores general comments about each PlantComponent which aren't related to a specific test) based on the Component_ID and that works fine - when I edit the Comments field, the row is automatically created and the linked ID field filled in for me.
However, when I need to do it with 2 links, it all falls apart. I've tried everything I can think of, including generating a single-column unique ID to use for the link, but Access just won't autofill for me. It just makes those fields on the form (or in the datasheet view of the query) non-editable because there's no associated row in Tbl_Results. If I create a matching row in Tbl_Results the query works fine, but that's not the point.
Implementation of the query is non-trivial because it requires two outer joins involving 3 tables - All from Tbl_Actions to matching in Tbl_Results, and All from Tbl_PlantComponents to matching in Tbl_Actions. This necessiates splitting the query into two - the first relates Tbl_PlantComponents, Tbl_Typicals and Tbl_Actions (returning one row for each Action for every Component), and the second performs a single outer join (using an AND) between the first query and Tbl_Results.
I have staff table which is a lookup field on the phone call table.when the phonecall form opens I want the employee field to auto fill in the employees name from the lookup field according to there security level.so something like this
On Open Select Case Forms!frmLogin!cboUser.Column(4) Case X = 4'the employees security level' Case X = Insert Table_tblPhoneCalls!EmployeeID"4" into Form_frmPhoneCalls!Employee. End Select
of course this is a syntax error as I do not know the correct code words.
I have a combo box linked to a look-up table. There are 8 fields in the look-up table but only if one of three is chosen do I want additional combo boxes to become visible. Do I put the code in the "after update" or "on change" event of the combo box and how do I express the code-
If TechniqueCombo="caudal" or "spinal" or "epidural" then TextNeedleType.Visible=True
I have two tables, and I'm trying to create a crosstab query...I think. One table is Contracts, one is Contacts. Each contract could have multiple contacts, but they are numbered (1, 2, 3...etc.) based on importance. I want to create a query that keeps each contract on one line, and separate fields for each contact and each field of the contact. So a contact will have Title, First, Last, Address, etc. So I want my query to show as follows:
Code: Contract-----Title1-----First1-----Title2-----First2 ContractX Mr. James Mrs. Sally
I of course need this to be dynamic, so if a contract has 9 contacts, there are fields up to Title9, First9, etc.
If i simply remove the GROUP BY line and stick the semicolon at the end of the previous line (.EmpID; ) it works just fine. How is adding a group by line causing an error?I tried adding another parenthes at the beginning ((( and ending the joins as EmpID); and that failed with the exact same error.
I have a main form with 3 sub forms. The main form is tied to a table called QUOTES_MASTER. The first sub form is tied to a table called QUOTE_ LINE_ ITEMS_DIRTGLUE. It calculates the subtotal when selecting items. The relationship is one-to-many linked on QUOTE_ID.
The second sub form adds up total of all line items and is not tied to a table.The third sub form adds ESTIMATED FREIGHT to the PRODUCT TOTAL and is not tied to a table. how to get the values from the line items form inserted into the QUOTE_LINE_ITEMS_DIRTGLUE table as they are added.
I also want to insert the total value from ESTIMATED DELIVERED into the LINE_TOTALS field in the table QUOTES_MASTER.I tried this code on the product total sub form but it doesn't do anything and there are no errors:
Private Sub PROD_SUB_AfterUpdate() DoCmd.RunSQL "UPDATE QUOTE_LINE_ITEMS_DIRTGLUE SET QUOTE_LINE_ITEMS_DIRTGLUE.SUBTOTAL = Me.PROD_SUB WHERE QUOTES_MASTER.QUOTE_ID = " & Me.QUOTE_ID
I have a module which reads a CSV transaction file line by line and adds the correct transactions to an access table and places the wrong ones in a logfile.Now some transactions are rejected twice there is even one rejected six times. Whereas one wrong transaction is processed only once. I am certainly overlooking something obvious in the logic but what. Here is the relevant code.
Code:
Function ImportCSVForConfederation(inputCSV, ORG) Dim TNO As Integer, TACT As Integer, TABLE As String, TLINE As String, I As Integer, J As Integer, K As Integer Dim FLD1 As String, FLD2 As String, FLD3 As String, FLD4 As String, LogFile As String, LogPath As String Dim Lim As String, ITNO As Integer
I am having a little difficulty with my importing in Access. Every time I import my text file, the lines will be jumbled. I have been reading up and I found this recordset code that seems to be what I need:
Code: Dim strLine As String Dim intLineNum As Integer Dim MyDB As DAO.Database Dim rst As DAO.Recordset Open "C:TestTest.txt" For Input As #1 Set MyDB = CurrentDb Set rst = MyDB.OpenRecordset("tblResults", dbOpenDynaset) CurrentDb.Execute "DELETE * FROM tblResults", dbFailOnError 'Clear tblResults
[code]....
Basically, this code will extract data from the text file as long as it fulfills the Mid$ criteria. Here's where my problem comes. Each line in my text file is of different lengths and I have to capture the entire line.
I think using the Left$ function would work, but I don't know how to determine the character count such that the entire line of text would be inserted into the table.
Another difference between what I need and the code above is that, I am required to store each line into each row of my table, meaning
Line 1 is placed in Row 1 Column 1 Line 2 is placed in Row 2 Column 1 Line 3 is placed in Row 3 Column 1 . . . Line X is placed in Row X Column 1.
I can change multiple things on a line graph with VBA.
Me.Graph47.chartType = GraphType ' take 65 for line with me.graph47 .SeriesCollection(1).border.Color = vbblue ' change the line color .SeriesCollection(1).border.Weight = LineWeight ' change the line weight to for example 3 .SeriesCollection(2).MarkerSize = MarkerWeight ' Change the marker weight, for example 4 .SeriesCollection(2).MarkerBackgroundColor = vbblue ' Change the marker color, .SeriesCollection(2).axisgroup = 2 ' put this series on the secondary axis end with
SeriesColection(1) is line with markers. This is correct.But now I want the seriescollection(2) without line, so only the markers. I cheched the MSDN site from Microsoft. The Excel trick with the macro does not work for me.how to hide the line with VBA for only SeriesCollection(2) in Access?
hi, i am creating a website with flash, asp and an access database. in my database i have a 'users' table with the fields, username, password, score, and access level. the score is automatically set to '0' at the beginin, as the user does various things on the site, it begins to adjust their score. eg. they answer a quiz, and they get 7/10 so the 7 points are posted to the database, and the score is 7. in my access level field, i have used the lookup wizard to have 3 options, level 1, level 2 and level 3. what i want is the access level to automatically change for each user depending on their score. so they start on access level 1, and once they reach 50 points, they get to access level 2, and past a 100, access level 3 if you see what i mean. i will then be using these levels to restrict certain users from certain pages. just wanted to know how this can be done in my simple ms access database. thanks