Filter Master Form Based On Subform Criteria
Jun 12, 2012
I have a Master form which includes tabs within the tab I have subforms. I am looking for a way to filter my master form based on data found within my sub form.
I have a check box within one of the sub-forms called "softwareInstall" if yes the box would be checked. I want to filter all customers within my main form with a check box in my main form to turn on and show all customer who has this box check within the subform SoftwareInstall=True.
View Replies
ADVERTISEMENT
Feb 28, 2005
I need to open my form with a filter attached that is based on criteria already existing in the subform. I've tried putting the following code in the OnOpen event of my main form :
Code:Dim stDocName As StringDim stLinkCriteria As StringstDocName = "Campaign Form"stLinkCriteria = "[Campaign - Last Contact Status subform].Form![Communication Response] in ("2","4","10","11")"DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria, acFormPropertySettings, acWindowNormal
Basically I want to open my main form (Campaign Form) and only show records where the "Communication Response" is 2,4,10 or 11(a variable on my subform "Campaign - Last Contact Status subform"). Which in itself is a problem because I can't seem to code all of these variables- it will only accept one.
When I run the above code I am getting asked to enter a parameter value for "Campaign - Last Contact Status". I'm not too sure where this is picking this up from or how to fix it. I've even tried to run this based on the underlying query of "Campaign - Last Contact Status subform" with the same results.
Can someone help me? All I want to do is open the form based on the criteria I specify which is contained in a field in the subform. It doesn't sound that hard but it seems to be getting the better of me!
View 4 Replies
View Related
May 2, 2005
Hi,
I've posted this same question a few months ago, started something else and forgotten about the problem, now I really need to solve this! (I had no luck with the original post - code still not working).
I want to apply a filter to my main form based on criteria showing on a subform. This is the code I've got (applied to the OnOpen event of the main form):
Code:Private Sub Form_Open(Cancel as Integer)Dim stDocName As StringDim stLinkCriteria As String stDocName = "Campaign Form"stLinkCriteria = "[Forms]![Campaign - Last Contact Status subform]![Communication Response]=1" DoCmd.OpenForm stDocName, acNormal, , stLinkCriteria, acFormPropertySettings, acWindowNormalEnd Sub
The main form is called Campaign Form
The subform is called Campaign - Last Contact Status subform
The field I want to filter on is Communication Response
The criteria I want to filter is : I only want to show records from the Campaign Form (main form) where the status of the Communication Response on the Campaign - Last Contact Status subform (subform) is equal to 1.
I've tried a few variations of the above code but the results are always the same - prompting to enter a paramater value. Now I'm just fishing and hoping I'll get it right.
FYI. the subform only contains one record for each record on the main form. It works a bit like this :
Customer||Date||Communication Response(1=open, 2=closed)
One||20/4||1
Two||21/4||2
Three||21/4||1
One||23/4||2
The corresponding record on the subform for customer One will show the communication response of 2 as this is the most recent date. Therefore you now have the following :
Customer||Communication Response
One||2
Two||2
Three||1
Now I want to only show those records that have a Communication Response of 1. Remember this field appears on a subform. This is the part I am having trouble coding.
I know I've probably just explained the most irrelavent details but if anyone can help me it would be greatly appreciated!!
View 1 Replies
View Related
Jul 26, 2015
So I have a search form that I created that has also a subform (a continous form, that has a query as its source) where my records are listed. I started on making a Between dates filter where i would be able to pick dates and get the results of records that are in that range.
I put two text boxes in which I set format to Short Date so that I get the button to select the date from a calendar for each text box. Then I made a button that is only for this and added a Clickon code so that it filters my subform over the recordsource of the form. The problem is is that i get an error and it doesn't filter.
Code:
Private Sub btnDatumUpis_Click()
Dim SQL As String
SQL = "SELECT qrySearchV.VID, qrySearchV.MarkVoz, qrySearchV.ModelVoz, " _
& "qrySearchV.TipMot, qrySearchV.Regist, qrySearchV.VlaVoz, " _
& "qrySearchV.KorVoz, qrySearchV.KatV, qrySearchV.DatumUVoz, " _
[Code] ....
View 5 Replies
View Related
May 13, 2005
Hi,
I have a form with a subform. In the subform (based on a different form) I need a button to close the master form. In the subform I need to find out what the master form is so I can close it. Since I use the same subform in multiple forms I can't really hard code the name of the master form.
Can someone help me?
Thx
Luke
View 1 Replies
View Related
Mar 6, 2006
Hi,
I have 2 forms, a master and a subform.
In the subform form there are some required fields. In the table behind the subform I choose the property of these fields to be required.
but in the master form, when I start enter the information I can go to the next record without even touching the subform.
How Can I make the subform required in the master form?
Regards,
CS.
View 1 Replies
View Related
Nov 16, 2014
My bound master form has bound subform in it and both of them has linked fields. In the master form i've placed a checkbox which if unchacked will lock and disable a textbox in the SUBFORM, and if checked will enable and unlock the textbox and fill it with a calculation result, which will then be passed on to the underlying table.
Now, suppose in the master form (named X), i have A (checkbox) and B (textbox with numeric value) and in the subform (named Y), i have C & D (both textboxes with numeric values). Hence if A is checked, I'd like D to return the result of - "B*C". Or else D will remain locked and disabled.
View 12 Replies
View Related
Jan 26, 2015
I have created a master form, which is a tab style. I have five additional forms that I want to use as sub-forms within each tab. I also want to include master navigation buttons that will work for each sub-form in unison. In other words if I navigate to record 10 on tab 1 and switch to tab 2, I want the new tab to show the information related to record 10. It would appear that I need to link them together in some fashion.
View 1 Replies
View Related
Apr 21, 2008
Below is the SQL I have on a Union Query. Each Query is
based on a date range. The first Query date is Planned
Immplementation Date. The second Query date is Revised
Planned Implementation Date. If the Date in the Revised
Planned Implementation Date is higher than the EndDateTxt
Date Range I do not want the results to appear for that
ECN. Any suggestions on how to accomplish this?
SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number]
UNION SELECT ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number], ECNDetailtbl.[ECN Description], ECNDetailtbl.[Planned Implementation Date], ECNDetailtbl.[Revised Planned Implementation Date], ECNBCNVIPtbl.[Serial Number Break Required?], ECNBCNVIPtbl.[Implementation Reporting Required?], ECNBCNVIPtbl.[Do Not Process]
FROM ECNBCNVIPtbl INNER JOIN ECNDetailtbl ON ECNBCNVIPtbl.[ECNBCNVIP ID] = ECNDetailtbl.[ECNBCNVIP ID]
WHERE (((ECNBCNVIPtbl.[ECN Number])<>"sample") AND ((ECNDetailtbl.[Revised Planned Implementation Date]) Between [Forms]![EcnVisualStatusFRM]![StartDateTxt] And [Forms]![EcnVisualStatusFRM]![EndDateTxt]) AND ((ECNBCNVIPtbl.[Do Not Process])="yes"))
ORDER BY ECNBCNVIPtbl.[ECN Analyst], ECNBCNVIPtbl.[ECN Number];
View 5 Replies
View Related
Jul 15, 2013
I have a form, a subform and a master unique table. I need the unique table to updated in the following manner: Form has certain fields that need to be assigned to every record created in the subform[id] and [info1] Subform has a unique [caseid], and contains further [info2] but needs to be bound into [id] in the main form. Example of the master unique table:
id info1 caseid info2
1 aaa 1001 asd
1 aaa 1002 dfg
2 bbb 1003 fff
3 ccc 1004 ffg
3 ccc 1005 ggh
I've managed to accomplish this with a linked table&subform structure, but the master unique table looks like crap because it collapses the subform values into sub-records in the master table when the [id] is similar. The data is in the rigth place, i just want it not to be collapsed/expanded, but every unique recors shows in the table in the regular format
View 8 Replies
View Related
Sep 28, 2012
I need to filter a subform based on the values on the mainform.
Criteria are Multiple. The idea is to show the user the records that are already existing in the table.
First two criteria works, stuck with the third one
I.Criteria - Creative(text type)
Private Sub Creative_AfterUpdate()
Me.frmCommercialWithDetails_subform.Form.Filter = _
"Creative ='" & Creative & "'"
Me.frmCommercialWithDetails_subform.Form.FilterOn = True
End Sub
[Code] ....
Also, how to split the code into two lines
"Creative ='" & Creative & "' And Act_ID = " & Act_ID
when broken into:
"Creative ='" & Creative & "' _
And Act_ID = " & Act_ID
is automatically saved as:
"Creative ='" & Creative & "'" _
And Act_ID = " & Act_ID " and this generates an error on execution.
View 5 Replies
View Related
Feb 11, 2014
I am trying to use this code to filter a continuous subform based on two criteria but getting a data type mismatch error.
It works fine if I filter by just one or another. Perhaps it is not possible
Code:
Dim intSpouseEntityID As Integer
intSpouseEntityID = Nz(DLookup("[EntityID]", "qryEntitiesLocations", "[ContactIDNumber] =" & Me.Spouse), 0)
If intSpouseEntityID > 0 And Not IsNull(Me.subformContactsHomeAddress.Form.EntityID) Then
MsgBox ("There are two spouse addresses please delete one and try again")
DoCmd.Save
DoCmd.OpenForm "frmContactAddresses", , , "EntityID=" & Me.txtEntityID Or "EntityID =" & intSpouseEntityID
End If
View 2 Replies
View Related
Jul 25, 2013
I am working in MS access 2007.
What I am trying to do is fairly simple i just dont have the ability to correctly code what i want to do.
I want to filter my query based on some criteria in multiple columns. But i only want the query to filter based on the specific criteria if a checkbox has been selected.
Basically i want the criteria for one of the columns criteria to read
IF a check box "Check0" is selected THEN filter the column to only records that = 1 and if "Check2" then filter all records that = 2
View 5 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
Below is what I have tried but in vain and it says atmost you can atmost one criteria row in sub query
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 9 Replies
View Related
Jun 13, 2005
Hello,
I have a form and a subform in MS Access 2003. I have made some changes to database structure, so I decided to change the subform also. When I changed the Link child and link master fields, the controls of the subdatasheet dissapear- they show only in design view. If I clear the contents of Link child and link master fields they appear again, but the records are not binded.
Is there a setting on the parent form that also has to be changed, to make the new binding?
Thanks,
Aleksander
View 1 Replies
View Related
Dec 13, 2005
Hello everyone!
I think I am asking the impossible, but can't think why it can't be done!
Here's the dilema:
I am working with an unbound form to search a Mobile Register.
On the form I have an unbound combo box which looks up User details from a table (LKP_User).
When I select a user, I want the subform below to filter all the details for that user and show me which mobiles they have.
PROBLEM:
Combo Box has 3 fields, User_ID, User, Dept_ID. User_ID is bound column but not displayed in combo (only User) is displayed.
I need to link the User_ID with the User_ID on the subform, but don't know how to tell it to look at column 1 of the combo box.
Can anyone point me in the right direction? Do I need some fancy code to get this to work?
Cheers in anticipation
NKA
View 6 Replies
View Related
Aug 18, 2006
I am running into a problem with just one form in my database. I was getting the error 'Can't build a link between unbound forms'. After searching here and elsewhere the solution is/might be to type the linked fields into the child and master proprty fields. However when I do that I still can't get this form to work. Would anybody please take a look at the file attached - I trimmed it down to two tables with a few records and a form/subform.
I want to make a selection in the combo box and have the filtered results displayed on the form below - simple and I have done the same thing in the database elsewhere but I just can't see why it won't work here.
Thanks
Steve
View 3 Replies
View Related
May 10, 2014
I have an access database in which I have a table A and table B. Table A has a list of 200 website URLs. Table B has one column ID and another criteria.
I want to create a query to filter websites list which does not have values or characters from table b.
I have these values in table B that I want to be filtered out or not shown in my URL Select Query
.org
.gov
.du
.pk
.dk
I would keep on adding more criteria into this so criteria table so adding new criteria into table B should not disturb our filtering.
SELECT tableA.WEB_ADDRESS
FROM tableA
WHERE ((([tableA].[wEB_ADDRESS] Not Like '*'+(SELECT * FROM tableB)+'*')=True));
View 3 Replies
View Related
May 23, 2013
I have researched but couldn't find any working filter criteria for subform criteria.i have used the code, searching the web but still no luck.I have attached the picture and sample northwind database (accdb). I just want to filter customers in Orders navigation using text criteria.
View 9 Replies
View Related
Mar 20, 2013
I have a form which uses a parameter based query to present an individual senior doctor with a list of names for of individual juniors to provide an assessment report on. When the first form opens the user enters their RespondentID.
Once senior has decided which names to comment on I have another form which has the questions to be answered which is opened by clicking a button on the first form.
How can I pass a parameter from the first form to the second so that only the records relevant to that senior doctor are displayed? The underlying table has 60 senior doctors and 20 junior doctors. The senior doctor is identified by the field RespondentID in the first form. I've tried putting a WhereClause in the FormOpen command but I still get a dialogue box asking for the parameter RespondentID when the second form is opened.
View 2 Replies
View Related
Jul 31, 2014
I have a Main form, and a subform which lists client details. On the Main form I have an unbound field. I want to be able to type a word into this unbound field and have it display all company names that have this word in them. ie. I type "Ltd" into the unbound field and it displays all companies with "Ltd" in the title.
I have created a query that does exactly this (Like ("*" & [Enter Word] & "*")), it displays a dialog box and I type in "Ltd" and it displays all relevant companies.
I have tried everything I know to make this work when I use the unbound field on the Main form, but I've had no luck.
View 3 Replies
View Related
Oct 23, 2013
I have a multi select list box which I am trying to use to open another form and apply a filter based on the user's multiple selections.
List box - lstCatergories
Main Form - frmSuppliersSummaryCategories
Subform on Main Form - frmSuppliersSummaryCategoriesSubForm
The Subform contains the text box CategoryID
Here's my code which nearly works...
Code:
Private Sub cmdFilterSuppliers_Click()
On Error GoTo Err_cmdFilterSuppliers_Click
Dim strWhere As String
Dim ctl As Control
Dim varItem As Variant
[Code] .....
My problem is that the control "CategoryID" is on the subform and I'm having massive problems trying to reference it. This is the part of my code that won't work:
Code:
DoCmd.OpenForm "frmSuppliersSummaryCategories", acNormal, , "CategoryID IN(" & strWhere & ")"
However; if I open the SubForm directly it works perfectly. I.e.
Code:
DoCmd.OpenForm "frmSuppliersSummaryCategoriesSubform", acFormDS, , "CategoryID IN(" & strWhere & ")"
To summarise... How do I reference the control "CategoryID" on the subform "frmSuppliersSummaryCategoriesSubform"?
View 4 Replies
View Related
Sep 30, 2004
The posting in archive t-31918 was very helpful and almost does the trick. I have a subform with gifttype that has only giftID and gifttype. There are four different gift types and I need a subform to open in a specific location, as a subform. The code given by the archive (my version):
Private Sub Gifttype_AfterUpdate()
If Me.[Gifttype] = "restricted/unrestricted" Then
DoCmd.OpenForm "frmgift1"
ElseIf Me.[Gifttype] = "planned gift" Then
DoCmd.OpenForm "frmplannedgift"
End If
...
Opens what I want as subform as a regular form.
How can I get the correct subform to populate a certain area on the master form?
Thank you!
Pat Wright
View 1 Replies
View Related
Mar 20, 2013
I have a report that gets its data from a query. I need the query to run before the report based on criteria based from two combo boxes on a form.
View 3 Replies
View Related
Oct 7, 2013
I have a form which I am using child/master fields to create a filter (see attached pic)
For the date ranges I need these to be
>= Start Date and <= Actual Finish Date
How can I set the criteria for these two fields, so that when someone picks a date it knows it's from or before the date entered.
View 14 Replies
View Related
Aug 16, 2013
I have a SubForm "assignments" based on a Query, which has criteria to filter dates and also to filter 0 and 1 of the checkbox ...
The question is:
How do I put in that SubForm one or more Checkbox to "enable" and "disable", only the criteria of such query? So, toggle, for example, those jobs that are not completed (Checkbox of the query=0) and those that do ...
View 1 Replies
View Related