I would like to know how I can put filter fields on a DAP that when you press a button will then filter a table. Also, does anyone know of any good references on working with DAP, becasue from what it seams like, there isn't any technical information out there.
View RepliesHi everyone, I am new to writing queries in access and I have got stuck with this one.
I have 2 tables containing similar data from 2 different paradigms.
The main columns I am interested in are not unique - labelled ID and Delta Ex (a score). The same ID values can occur more than once in the same table, so I am interested in calculating the average Delta Ex score for each ID value in each table.
I then want to ask what ID values occur in both table 1 and table 2 and then calculate the average score of each common ID values across both tables. i.e. ID 1 score = avg(table1.delta ex, table 2.delta ex).
I then want to rank the top 50 scores.
So far I have the following to find common ID values, with a score above a threshold set by the input string threshold. These are ordered with in descending score value.
SELECT [MODEL 1].[ID], [MODEL 1].[Delta Ex]
FROM [MODEL 1], [MODEL 2]
WHERE ((([MODEL 1].[Delta Ex])>[threshold]) And (([MODEL 2].[Delta Ex])>[threshold]) And (([MODEL 1].[Accession])=[model 2].[accession]))
ORDER BY [MODEL 1].[Delta Expression] DESC;
With a second query I can select the top 50 scores:
SELECT TOP 50 [query 1].ID, [query].[Delta Ex]
FROM [query 1]
ORDER BY [query 1].[Delta Ex] DESC;
However, I can't for the life of me work out how to obtain an avg score for each ID value.
Any help would be very much appreciated.
J
Hey all, I have been trying to filter my report However It doesnt seem to be working the way I would like it to. I have the ability to filter on my form, so I can search Wood* and then there will be 27 records displayed so I can view each one speratly. however now I would like to have it on a report. I would like to then click the report button, and view those 27 records on my report as the layout that I have provied I can see multiple on a sheet. Any ideas?
View 4 Replies View RelatedI have two tables, say customers and purchase orders. I am trying to write query that returns a list of customers based on a wild card purchase order search.(FYI, the query is being used in a VB.NET application)
Code:
SELECT Customers.WarehouseID AS Customers_WarehouseID, Customers.Name, PurchaseOrders.PurchaseOrder, PurchaseOrders.WarehouseID AS OBRs_WarehouseID
FROM Customers INNER JOIN OBRs ON Customers.[WarehouseID] = OBRs.[WarehouseID]
WHERE (((OBRs.OBR) Like '" & strPOFilter & "*'));
This query almost works how I'd like it to, except in cases where a single customer has multiple purchase orders that begin the same way. So, for example, if customer "mike" has purchase orders "00554" and "00553", if you search for "00", mike will be returned twice. How can I modify the query to only return the customer once?Is it possible, or should I filter out repeated offenders in my code?
I have a form that contains a pretty large list of items and several columns and the list can be sorted by each of these columns. When a user double-clicks on a particular item, another form pops up that lets the user view/modify the item. The problem I'm having is that I still want to be able to use the navigation buttons in that second form, but right now its just saying 1 of 1 (Filtered).
The way I'm applying the sorting is by updating the Rowsource field of the list with an "Order By" statement
Any help would be appreciated
Adam
i've created a form base on a query, and other users will work on it (mainly filter). then i created a report base on the same query...
what i want is a "print" button on the form which will print the report, not all records, but only the filtered records after user applied their filters...
since users will apply different filters each time, it's quite impossible to make all different filters as query...
any idea?
Hello all,
I have looked through the forum, found some things, but not sure if they help with what I need specifically. I tried looking at the microsoft website, but can't really follow some of the things they have there.
On clicking a form (called Manager), I would like a list of some fields from a query (called queryMgr) to pop up, so that I can put in the criteria as I would if I just used the query, and then submit or run, and the form gives the filtered results. I don't want users to open the query and put in their criteria, I just want them to go to the form directly
When I click the form, I want the following to pop up at the same time so I can fill in the criteria:
Date
Vendor Number
Invoice Number
Check Received (this is a Yes or No field)
and then when I click submit or enter, the form gives me say 5 records that match this criteria.
Thanks a lot!!!
I'm new to Access and am trying to work out the best way to achieve the following.
I need a way for users to be able to filter the data which is displayed by forms or output in reports. For example, suppose that a user wants a list of all customers in either of two specific towns with a specific date of birth.
Obviously this could be achieved using a query and setting the criteria of the towns column to be:
"Anytown 1" or "Anytown 2"
and setting the criteria of the Date of Birth column to be the specific date required, e.g.
"08/08/2006".
However, so far everything about my database has been very user friendly with forms for data entry and presentation, so I don't really want to force my users to start creating their own queries.
The alternative I'm thinking of is as follows. Provide a query to pull together the required information (from various tables) but without any specific criteria. Then create a form with a field for each of the columns in the query, and allow the user to type their critieria into these. Then, place If statements as the criteria of the query to check if there is anything typed into each box on the form and, where there is, set it as the critieria for the query, then run the query.
With the above in mind, I have two questions.
1) Is there a better, more "standard" way to achieve a system of allowing users to create customised filtered data without requiring them to write queries?
2) In some cases, e.g. like with my specification of a town above, it would be good if the user could select the town they want to filter for from a drop-down combo box, rather than typing it in and risking entering details incorrectly. However, this would obviously allow them to select only one town, and not two as was required in my example. Is there an equivalent to a combo box which would allow multiple selections?
Thanks in advance if anyone can help me - and please remember that I am new to Access so whilst I want the best possible solution, I need a plain English explanation!
Gary
Ok access noob here and a first post as well...I have to filter a table that has children and teachers.I made a form with a combo box of teacher names then filteredon the teacher name.in the subform I have to create a matrix of the children thatare assigned to that teacher.it would be something like thisteacher date child name start endthe teacher and child name are in tblmainthe date start and end values have to be in tbldata1so the beginning they want to choose a teacher and a dateso I shifted and put the teacher in a combo box and tied it to nothingbut the subformso combo box teacher and field datelinks to subform are teacher;datecombo box(teacher name)==> Ms. Eve text box(date)==> 01/01/06but they want a filtered list on teacher so the subform would have to beteacher date child name start endMs. Eve 01/01/06 mary lamb Ms. Eve 01/01/06 billy bullMs. Eve 01/01/06 bob jonesthen they could put in start and end for each childI don't see how I can get the child names filtered thru a query (thisI can do) BUT then to be able to edit the fields and put this datainto a new table.IS there a way to do this?a big help for any ideas or pointers as I am lost on this
View 3 Replies View RelatedHelp !! - Can anyone help. I have had a quick look through the previous threads and can't seem to find anything that may help me. Has anyone got any ideas.
I have a table which has many columns, one of these columns is called actions. On the design of the table, the action column is a Text Datatype and on the lookup tab the row source is a typed in list of actions.
A form has been created from this one table. A drop down box has been created which looks at the action column and so drops down to give us our typed in list of actions.
Users will select the current action from the drop down list.
What I actually want to do is depending on what the current selected action is, that the drop down box only shows a subset / filtered list of actions.
I know how this is designed is not the tidiest/slickest way of doing things, But unfortunately, I have inherited this from someone else who has been running the database this way for over 6 years !!
I have a text column that has some Letter in it, the format is #A-##A where A = Alpha, the last Alpha is also not required. What I want to do is get a list of all the first A's, so like i have 11P-23A, 22G-45B, 33K-67C and I want to get A,G,K is this possible?
View 3 Replies View RelatedHi
I want a filtered pop up form to accept new records.
The archive posting that I found suggested that I insert
[MyForm]![LinkedField] as the default value of the linked field.
Any suggestions gratefully accepted.
Steven811
Ok heres the problem, i seem to have a little bit of a mind block at the moment so help would be greratly appreciated.
Basically there are two tables involved, tblBikes (which contains all information on the bikes) and tblHires (which contains all the information about hired bikes) these are linked with a one to many relationship as each bike can be hired out many times.
I have a button on a form containing bike information which opens the hires form filtered by the bike ID of the record selected in the first form. When I add a record to the hires form i need the bikeID to be automatically input into the field.
I have a button that opens a second form and shows filtered data based on the selection of a ComboBox from the initial form. That all works nicely, I now wish to sort the Data in the new form by [POID].
The code I'm using looks like this;
Private Sub Command5_Click()
On Error GoTo Err_Command5_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "FRM_AWMPonum"
stLinkCriteria = "[ClientID]=" & Me![Combo0] & " AND IsNull(DelDate)"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_Command5_Click:
Exit Sub
Err_Command5_Click:
MsgBox Err.Description
Resume Exit_Command5_Click
End Sub
What changes do I need to make to the code to sort the data?
Happy New Year to ALL!
I am trying to e-mail from a form that displays filtered result, but having trouble. Could someone please guide me?
I am using DoCmd.SendObject (a routine that I found in a newsgroup). This routine works fine when I am sending it to all the recipients, but not to filtered recipients. The form shows filtered result, but I am not being able to use the command to only send to filtered recipients. Instead, when I press the button to e-mail, it populates the cc: field with all the e-mail addresses rather than the filtered addresses.
Any help would be greatly appreciated. Thank you.
Here is the code:
Private Sub cmdGenerateList_Click()
'Create Email list from the appropriate query and open Outlook with those addresses in the cc: field
Dim db As Database, rs As Recordset, sql As String, emailTo As String, txtEmailList As String
On Error GoTo Err_cmdGenerateList_Click
Set db = CurrentDb()
emailTo = ""
sql = "select EmailName from qInd_info "
Set rs = db.OpenRecordset(sql)
Do Until rs.EOF
If Not IsNull(rs!EmailName) Then
'build up email addresses separated by a semicolon
emailTo = emailTo & rs!EmailName & "; "
End If
rs.MoveNext
Loop
'Remove the last semicolon
If Right(emailTo, 2) = "; " Then
emailTo = Left(emailTo, Len(emailTo) - 2)
End If
' Me.txtEmailList = emailTo
'Create the message with the recipients in the BCC: field
' DoCmd.SendObject acSendNoObject, , , , , emailTo
DoCmd.SendObject acSendNoObject, , , , emailTo
Exit_cmdGenerateList_Click:
Exit Sub
Err_cmdGenerateList_Click:
Select Case Err.Number
Case 2501
Resume Next
Case Else
MsgBox Err.Description
Resume Exit_cmdGenerateList_Click
End Select
End Sub
I have created a query of 382 records. After filtering I now have a result set of 32 records, which I want to save as another query.
When I select Save As and rename, I get my original 382 record query with a new name.
How do I save the 32 record result set?
Where MS Excel is concerned there is very little I can't do and I am now transferring that skill to MS Access and I'm stumbling on this one.
In Excel I would use the INDIRECT formula within the validation and named range to do this but in Access I'm struggling to get this to work.
I have in table TBL_NL_Structure a list of CLIENT_ID with NL_ACCOUNTS against them i.e.
CLIENT_ID....ACCOUNTS
900001.........4000
900001.........4001
900002.........4003
What I want to be able to do is in a sub form and a combo box named ACCOUNT that looks at the active CLIENT_ID and pulls into to combo box JUST the ACCOUNTS set to that CLIENT_ID example if the CLIENT_ID is 900001 is just brings in ACCOUNTS 4000 & 4001.
I can get the whole list to come in to the combo box but not a filtered list.
I have a query that is filtered on a form (Forms!qRosterReport!SessionID) that I need to export to XML. I can export the query unfiltered but get an error with the filtered export. I am ok with Macros but very limited with VBA.
View 3 Replies View RelatedI am fairly new with Access and VBA and am having troubles with the following. I filter a second combo box "cboTagNumber" with the first combo box "Combo133". The problem is when I clear the first combo box, the second combo box remains filtered. Is there an easy way to clear this?
This is the code:
Private Sub Combo133_AfterUpdate()
Dim strSource As String
strSource = "SELECT ID,[Tag Number] " & _
"FROM [E&I Table] " & _
"WHERE System = '" & Me.Combo133 & "' ORDER BY [Tag Number]"
Me.cboTagNumber.RowSource = strSource
Me.cboTagNumber = vbNullString
End Sub
I can open up my tables using the code below in a distributable runtime version, but I cannot filter and sort in the table. Right clicking does nothing.
Dim strTableName
strTableName = Nz(Me.cboTableNames, "")
DoCmd.OpenTable TableName:=strTableName, View:=acViewNormal, datamode:=acEdit
I know with a form we can select to allow filters in the form properties, but when the OpenTable command is used, how can we allow for filtering?
Is it possible to open the tables in a generic form that allows for filtering?
I have a split form with graphs in the upper design section and the table of the data that the graphs represent in the data view underneath. I would like to make the graphs dynamic with the data from the forms if the data is filtered in design view.
I know how to get the filter from the data view by using the .filter and I would like to use that as part of an SQL statement in my Rowsource for the graphs to dynamically change the graphs when a filter is used. My problem is the data is returned with .filter function returns with quotation marks (example below), and because I'm wanting to use that data in a string to change my rowsource the quotes need to be replaced with an apostrophe. How can I change the quotes to an apostrophe, or is there a better way to "filter" a graph?
Example:
Returned from .filter
([FrmTable].[CurrentABCS]="A")
What I need:
([FrmTable].[CurrentABCS]='A')
I filter my table with a query - where the Invoiced Date is NULL. In the vba ADD RECORDS code I may INSERT new records which should then also appear - but are not showing up. The records ARE added to the table, but don't show up unless I close the form and reload it and then the query filter picks up the added records.
View 5 Replies View RelatedMy database contain these:
- Products Table = [ID].AutoNumber, [Product].Text, [Active].Yes/No
- Orders Table = [ID].AutoNumber, [Product].Number, [Date].Date/Time, [Payment].Text
- Orders Form = [ID], [Product], [Date], [Payment]
I have [Product] in Orders Table and Orders Form as Combo Box for showing Product from Products Table.
And within product field on Orders, I want to make 'Active' product only showing up when choosing from combo box.
I made some records to test in Orders Form. Then I filtered Product from Orders Form with query:
Code:
SELECT Products.ID, Products.Product, Products.Active
FROM Products
WHERE (((Products.Active) Like Yes));
Then I changed some product 'Active' to "No"
And the old record disappearing.
How to make older record not disappearing when I filter some of field not being available to choose (because Active product uncheck)
More in-depth, Attachment Database1.zip
I have data sheets as subforms on a Main nav page that show the students and the classes they are enrolled in. I have combo boxes to filter this for individual classes /students. On the Classes By Student DS I have the cost of each class. I want to total these classes per student and start building an accounts system that will show how much they owe and how much they have paid. I just need to start with the totals though.
On the Student by Classes DS I want to generate registers as reports. The only hard this in this is I would like to have a box for each class date on the form. I have put the term dates in a small table and I want a box for each class day from that.
This is the first time I am trying to do mail merge from access.
Actually I have a query and I have designed the letter template in Ms word.
Now I want to filter the query based on the data passed from the access form and merge the filtered data in Ms words mail merge.
I have a large database with over a million entries. I am trying to filter certain years (04-12) and certain states (western US). After the two filters are on my entries are down to 328,000. Now, I want to save the 328,000 to a new database.
View 1 Replies View Related