Filtering Subform..
Mar 6, 2006
Yes, Ive searched the forum and Im still stuck on this most basic of concepts - please can someone point me in the right direction?..
I have a Form [frmClient] and a subform [sbfrmCommsList]. The subform links nicely with the main form via [ID]. However I want to add a second filter on the subform selecting only [Type] = 2 rows (from the child table)
This is in the subform:
Private Sub Form_Load()
Me.Form.Filter = "Client=" & Me.Client & " AND Type =2"
Me.Form.FilterOn = True
Me.Form.Requery
End Sub
It still displays all records (Both [Type] 1 and 2)...
thanks..
View Replies
ADVERTISEMENT
Sep 1, 2006
I almost have this form done.
I have a form with a combo box, and 2 subforms from it. When you select in the combo box (Group), it brings up the choices (Sections) for that group in a subform. Then there is another subform, that is supposed to bring up a series of questions that are related to the section that has been selected. The question field has a drop down to a list table, that has all the questions. Once the question has been selected, it stores in a Master table. The relationship is there. If you try to select any questions that do not pertain to the section, it gives you an error message.
What I need it to do, is when the section is selected, filter out the questions that pertain to that section, and have those questions be the only ones available in the drop-down list to choose.
I know that I need to have an After Update code once the section has been selected, but not sure how the coding should be.
I hope that someone can help with this!
:confused:
View 1 Replies
View Related
Sep 1, 2006
I have a form that is almost complete
I have a form with a combo box, and 2 subforms from it. When you select in the combo box (Group), it brings up the choices (Sections) for that group in a subform. Then there is another subform, that is supposed to bring up a series of questions that are related to the section that has been selected. The question field has a drop down to a list table, that has all the questions. Once the question has been selected, it stores in a Master table. The relationship is there. If you try to select any questions that do not pertain to the section, it gives you an error message.
What I need it to do, is when the section is selected, filter out the questions that pertain to that section, and have those questions be the only ones available in the drop-down list to choose.
I know that I need to have an After Update code once the section has been selected, but not sure how the coding should be.
I hope that someone can help with this!
View 1 Replies
View Related
Nov 22, 2006
I have an SQL query that filters a subform based on the selected item in an option frame that runs on the after update event of the option frame.
Forms!fsubPrjPersonnel.RecordSource = SQLText & WClauseWhen I try this out, I get the following error message:
2450 - xxx can't find the form 'fsubPrjPersonnel' referred to in a macro expressions or Visual Basic code.
I then ran the following snippet and found that the form is not recognized as being loaded when it is "open" as a subform
If IsLoaded("fsubPrjPersonnel") Then
MsgBox "form found"
End If
If I open the subform as a form as well as having the main form & subform open, i.e. open a second instance of the subform from the database window, it filters fine.
I have been able to requery the subform so where am I going wrong?:confused:
View 5 Replies
View Related
Mar 31, 2005
I have a sub form to which I want to apply filter buttons.
I have used the wizard to set these up.
The problem I have is that when I try to filter the SubForm the MainForm also filters.
The forms are based on tables and not queries.
Cheers
Gordon
View 1 Replies
View Related
Sep 13, 2006
i have a form with a subform on it. the subform has 2 columns - one of which is hidden. Assume the other column is called "type".
i was wondering if there is an easy way to 'hide' records in the subform which have "type" = "Car"
thanks
View 3 Replies
View Related
Aug 1, 2005
ok, i've discovered filtering does not work on subforms so i have searched the forum and modified some code to this:
Dim strSQL As String
strSQL = "Select * from tasks where"
strSQL = strSQL & Me!frmSubProjects.Form!Project = 2
Me!frmSubProjects.Form.RecordSource = strSQL
error message is " can't find the field 'frmSubProjects' referred to in your expression. (line3)
Please note a 'mouse over' of Me!frmSubProjects.Form!Project in the above code does show a result (first 'Project' value in subform) - so what am i doing wrong??
thanks in advance,
Paul
View 3 Replies
View Related
Aug 23, 2005
I have a tbl_product with PK_productID as primary key and frm_search with a subForm in it, How do I filter my subForm in a form with a single click button?? well... at first i did it with open new form with a specific data to display.
and from now on i want with a single click in my search form the result will show up in my subform but i don't know how to do it T_T
anyone can help me with this problem??
thnx...
View 1 Replies
View Related
Jan 8, 2006
I've finally figured out how to populate my list box with radio buttons (3 companys listed on the radio buttons, you click one and employees for that particular company populates the list box). Now I'm trying to figure out how to click on an employee in that box and have their contact information populate the subform that holds that info.
After trying unsuccesfully with VB, I considered using a macro that would open the subform where the Last Name = the Last Name clicked in the list box, but I couldn't figure that out (couldn't figure out what the name would be for the selection in the list box) but I would prefer the subform be there permanantly in "add" mode untill a selection is made in the list box.
I'm code ignorant and rely on google and what books I have for reference / copy-past.....any ideas?
View 3 Replies
View Related
Jan 8, 2006
I've finally figured out how to populate my list box with radio buttons (3 companys listed on the radio buttons, you click one and employees for that particular company populates the list box). Now I'm trying to figure out how to click on an employee in that box and have their contact information populate the subform that holds that info.
After trying unsuccesfully with VB, I considered using a macro that would open the subform where the Last Name = the Last Name clicked in the list box, but I couldn't figure that out (couldn't figure out what the name would be for the selection in the list box) but I would prefer the subform be there permanantly in "add" mode untill a selection is made in the list box.
I'm code ignorant and rely on google and what books I have for reference / copy-past.....any ideas?
View 1 Replies
View Related
Jun 21, 2005
I have this form where there's mention of CompanyID
In a subform, I have the information about all the contacts of this Company. In order to see full detail information for a particular contact (of that particular Company) I have a Combobox with a query.
At least: that's the whole idea. Unfortunately it doesn't work in Access:
SELECT Contact.ContactID, Contact.Name
FROM Contact
WHERE ((Contact.CompanyID)=(Me!frmCompany![ContactID]));
Can any help me? I need to do more of the sorts of queries... and I can't figure it out how to use values from forms and parent-forms.
Any help is appreciated,
Jazz
View 1 Replies
View Related
Sep 12, 2006
Hi all
I have been using some code from this site to filter my forms and subforms via a selection of combo boxes. However, when I try to filter by either date or callid, I get runtime error 2001 and the debugger drops in at the first forms!filter line. This seems to work perfectly well for the other 3 combos that I use. Is it to do with the type of fields I am trying to filter with or am I missing something integral to the code? Each combo is named Filter1, Filter2, etc and the name of the field to filter by is placed in the tag line for the corresponding combo box.
Private Sub Command13_Click()
Dim strSQL As String, intCounter As Integer
' Build SQL String.
For intCounter = 1 To 5
If Me("Filter" & intCounter) <> "" Then
strSQL = strSQL & "[" & Me("Filter" & intCounter).Tag & "] " _
& " = " & Chr(34) & Me("Filter" & intCounter) & Chr(34) & _
" And "
End If
Next
If strSQL <> "" Then
' Strip Last " And ".
strSQL = Left(strSQL, (Len(strSQL) - 5))
' Set the Filter property.
forms!frmoutershell.frminnershell.Form.frminnerinn ershell.Form.Filter = strSQL
forms!frmoutershell.frminnershell.Form.frminnerinn ershell.Form.FilterOn = True
End If
forms!frmoutershell.frminnershell.Form.lblfilter.C aption = strSQL
End Sub
Any help would be appreciated as I am getting quite frustrated with it only working on certain parts of the form.
Regards
Jason
View 3 Replies
View Related
Jun 5, 2013
I have a username combobox and a number combobox filtering a subform. If there is a userName but no number I want to pull all the records for that userName regardless of number and vice versa with a number and no userName. And if they both have something then both are being used for the filter.
I have been trying iff statements and isnull in query criteria and cant seem to find what I need.
View 1 Replies
View Related
Jul 29, 2014
The main form has fields for Record ID, Position, and Revision. The subform has fields for ID, Position, and Revision. There is also a field for "task". I have over 15 positions and 495 tasks. Each position has a set number (around 15 or so) tasks associated with that position.
I have the Position in the main form and the subform linked so when I select a position on the main form, the subform loads the same position. The question field (drop down) is "fed" from a query which contains all positions and all tasks. What I want the subform to do is when I select a position the drop down ONLY displays the tasks associated with that position.
I tried using an event procedure "On Click" and "After Update" to no avail. The embedded macro was:
Apply Filter Where condition= [tbl_Detail Cost Information]![Position]=[qry_attempt 1]![Position].
I also tried the reverse Where condition =[qry_attempt 1]![Position]=[tbl_Detail Cost Information]![Position]
The result is a fully loaded (all tasks) drop down.
View 4 Replies
View Related
Feb 9, 2015
I am using Access 2010. I have a subform(continuous form) that I display as a datasheet and allow filtering. I display the record count by using Me.Recordset.RecordCount in the subform's form_current event. This value updates properly based on the column filtering except when the filtering displays 0 records.
When there are 0 records, the form_current event does not fire and I cannot figure out how to trap when this occurs so that I can display '0 records found'. How I can tell when the column filtering causes 0 records to display in the datasheet? Is there an event that fires when the user filters using the column headings arrow?
View 5 Replies
View Related
Nov 5, 2014
I have not used access since Office 97 so, I see many changes. A while back I used Access to create some minor tracking databases. Now, with 2010 I'd like to modify the database that I am currently using. I have a main form that tracks daily trips or tasking(s). Within the form are two sub forms that track:
1. People assigned to the trip through a combo box; and
2. Itinerary for this trip.
I have been asked to add a Trip justification(s) through a combo box which will have several selections avail that can be chosen and would apply to each trip. These can be added to by double clicking the justification (figured that one out). What I would like the sub form to do for each new trip that is entered is to display only these values as a single selection rather than 12 times (example) if there are 12 trips that have the reason justification as part of the trip/tasking.
I just can't seem to make this work. The personnel one and itinerary one work just fine (previously existing). I just can't seem to get the new one to work. I have checked that the new table is connected through the relationships. In the exact same manner. The new form has the ID (Key) OPID (to link each trip separately) and justification text field.
View 6 Replies
View Related
Sep 25, 2014
I have a tab control at the bottom of my main form, and some of the tab pages contain subforms. On one of the subforms I have created a filter to divide the content into "complete" and "incomplete." I have also added a toggle button option group to the subform to toggle the filter (one button for "complete" and one for "incomplete"). I'm using a macro to apply the filter, but it isn't working. The filter does work properly if I use the "Toggle Filter" button on the Ribbon, but I want to create something a little more user friendly.
I have :
Main form: Search_by_name
Subform: Action_Items
Underlying table: tbl_Action_Items
Subform control: sfctlActionItems
Toggle button option group: tgl_Complete_Incomplete
Here's the macro as it stands right now:
If [tgl_Complete_Incomplete]=-1 Then
ApplyFilter
Filter Name
Where Condition =(([tbl_Action_Items].[Completed])=True)
Control Name [Forms]![Search_by_name]![sfctlActionItems].[Form]![tgl_Complete_Incomplete]
Else
RunMenuCommand
Command RemoveFilterSort
End If
I get the error message "The 'ApplyFilter' action requires a valid control name that corresponds to a subform or subreport."
If I remove the content of the Control Name field and open the subform independently (i.e. not as a subform), everything works fine.
View 6 Replies
View Related
Jul 1, 2014
I thought I was in the home stretch of my project, everything worked great when I was messing with 200 records. Now that I'm messing with 2000+ records, things are very slow. So a search form redesign!
I have a form (frmSearch) that has a subform (frmSubSearch) embedded in it. The frmSubSearch is a datasheet only that is just pulling its info from a query (qrySearch). qrySearch has about 8 columns of data in it.
On the main form I have a combo box that is feeding its list from the qrySearch using a SELECT DISTINCT statement. So a user selects an item in the combo box and my After_Update fires. This sets a filter on frmSubSearch. I have three of these combo boxes that can add to the filter and they work great so far.
But I want to have the combo boxes filter themselves based on whats left on frmSubSearch. So if a user selects something in the 2nd combo box, the sub form filters and updates, but then I want the other two combo boxes to only have valid selections, and not something selectable that would wind up giving me a blank sub form result.
I have tried using .Requery in various ways, but its not working. I have also been looking into the idea of Cascading Comboboxes, but these don't seem to quite fit what I'm trying to do.
View 9 Replies
View Related
May 30, 2013
I have these 3 combo boxes filtering results into a subform.
Code:
Private Sub Combo5_AfterUpdate()
If Len(Nz(Combo5, "")) > 0 Then
FindRFQsubform.Form.Filter = "[RFQ Title] = '" & Combo5 & "'"
FindRFQsubform.Form.FilterOn = True
[code]...
View 1 Replies
View Related
Feb 26, 2015
I have a form and subform where i have table data in the subform and 03 Combo box in the main form header. I need to do some filtering using combox box1 and out of that filtered records i need to do one more filtering using combobox2. then again another filtering by Combobox3. ( same way we are doing in Excel)
Subform is running on a query where i have following fields;
Vessel
Voyage,
POL
POD
MLO
by Combo box 1 i need to filter Voyage
by Combo box 2 i need to filter POL ( out of the data filtered by above )
by combo box 3 i need to filter POD ( out of the data filtered by both above )
View 3 Replies
View Related
Sep 11, 2013
I am trying to filter a subform on a tab control based on an input on a second form.
Mainform: frm Index Page 2
Tab Control on Mainform: tabctrlMain
Subform: Customer Details
Tab Name: tabCustomerDetails
The second form is basically a separate Search Form where users can look for a customer ID and returns the ID back to Customer Details form.So far I have managed to redirect focus to the correct tab on the tab control using the following code:
DoCmd.OpenForm "frm Index Page 2"
With Forms("frm Index Page 2")
!tabctrlMain.Value = !tabCustomerDetails.PageIndex
End With
However, I am stuck with the filtering part. Everything was working fine before I began putting the forms together into one big tab control (I tried using Navigation Pane but there were too many referencing problems so I gave up on that one).
View 2 Replies
View Related
May 6, 2013
I have faced with a problem while i was filtering my main form.....my problem is when i filter the main or parent form the related sub-form also gets filtered how to manage the main form so that when i filter it the sub-form should not be filtered so that i can get the related record to my filtered one in the sub-form... as for the time being when i filter the main form the related record in the sub-form is not shown and when i press unfiltered on the sub-form its data gets appeared....
View 11 Replies
View Related
Jun 28, 2013
I have a pivotchart subform who's Filter Property I've set to:
Code:
[EEIC_ID] In ([Forms]![MainDataControl].[EEICBuffer],0) And
IIf([Forms]![MainDataControl].[TypeIDBuffer]="",[AG_TYPE_ID] Like "*",[AG_TYPE_ID] In ([Forms]![MainDataControl].[TypeIDBuffer],"")) And
IIf([Forms]![MainDataControl].[AgencyBuffer]="",[AGENCY_ID] Like "*",[AGENCY_ID] In ([Forms]![MainDataControl].[AgencyBuffer],"")) And
IIf([Forms]![MainDataControl].[FacilityBuffer]="",[FACILITY_ID] Like "*",[FACILITY_ID] In ([Forms]![MainDataControl].[FacilityBuffer],""))
The issue is that none of the parameters are recognizing the textbox controls even though the references appear to be correct. Per access.mvps.org/ access/forms/frm0031.htm, I've attempted several versions of the syntax.
I believe that I've done this successfully in several other forms, though none have been been via a pivotchart. What's more, this exact same filter string worked when the pivotchart was its own popup and the referenced form was a separate window. Once I embedded it (being the pivotchart) as a subform, however, I began to be presented with the "Enter Parameter Value" dialog, even though the control's address had not changed. Note: the form with the embedded pivotchart is separate from the control's parent form.
In essence: the filter property of a pivotchart subform has a parameter that references a control on a seperate popup form, and every one of the syntactual statements I've tried returns an "Enter Parameter Value" dialog (where they did not when the pivotchart was not a subform). I've also attempted to isolate this issue by putting the text box controls on the parent form (rather than the separate popup form) and referencing them via the pivotchart subform, but this provided no resolution (the same thing happened).
View 8 Replies
View Related
Mar 27, 2014
I filter my subform (datasheet) by fields, everything works great except "date" column. MS Access shows that record does not exist but it isn't true.
Code:
Me![frmAktPD].Form.Filter = "[Data przyjęcia] = " & Me.DataPrzyjecia
Me![frmAktPD].Form.FilterOn = True
Where is the problem?
View 1 Replies
View Related
Jul 25, 2013
I'm having issues with this one.
Table name is CompDates
Subform is ViewByMarket
Start date is Text13 and End Date is Text15.
I want it to filter out any matches between the 7 fields. Here is my code:
Code:
Private Sub Command19_Click()
Dim strFilter As Variant, _
strSDate As String, _
strEDate As String
'check Text13
Text13.SetFocus 'set focus to Text13 to be checked
[code].....
It will only filter for Build Date 1 and not for any of the other fields.
View 1 Replies
View Related
Apr 27, 2013
I have a Suppliers database which contains a form that will allow me to place orders with Suppliers.The Main form has a combo box that allows me to select the supplier. The combo box is called SupplierID with the following:
Row source: SELECT Suppliers.SupplierID, Suppliers.CompanyName FROM Suppliers ORDER BY Suppliers.CompanyName;
The subform is called Stock Subform witha combo box called ProductID with the following:
Row source: SELECT DISTINCT Products.ProductID, Products.ProductName, Suppliers.CompanyName, Products.Discontinued FROM Suppliers INNER JOIN Products ON Suppliers.SupplierID=Products.SupplierID WHERE (((Products.Discontinued)=0)) ORDER BY Products.ProductName;
Event Procedure - AfterUpdate: Private Sub ProductID_AfterUpdate()
On Error GoTo Err_ProductID_AfterUpdate
Dim strFilter As String
' Evaluate filter before it's passed to DLookup function.
strFilter = "ProductID = " & Me!ProductID
[code]..
The Link fields are done on the Purchase Order ID (PONoID).What I want to achieve is to select the supplier from the combo box (SupplierID) on the main form and then the combo box (ProductID) on the subform to filter to only show products directly supplied by the Supplier selected on the Main Form.
View 11 Replies
View Related
