Focus On A Form
May 26, 2005How do i choose the field i want my focus to be on when a form i opened?
View Replies
ADVERTISEMENT
Forms :: Setting Focus To Control On Single Form Side Of Split Form
Jun 24, 2013When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
Set Focus On Form
Jan 28, 2005I have a form, and when it opens it has focus on a box i dont want it to focus on
How do i change which box it has focus on when it is opened?
Forms :: Button In Popup Form - Set Focus To Another Form?
Jan 28, 2015How can I make a button in a pop-up form to send enter key to a text box in another form? Do I need to set focus to the other form first? And how?
View 1 Replies View RelatedSub Form Steals Focus
Apr 14, 2006Hi, this is frustrating, and a little complicated, so I'll try and explain it as best I can..
I have a form with two sub forms.
The main form "fmMain" contains a list of species. the subform which is causeing me the problems lists loci specific to each species. The user can search by a species or locus and resrict the list accordingly.
Now, here is the problem. The form is too large for my screen, so I have some scroll bars on fmMain. However, whenever the user performs some kind of search the focus shifts to the subform (I guess), causing the screen to scroll to the middle. From here you can't see the species info, and after each navigation the user has to scroll back up again. It's frustrating having to continually scroll around the screen.
Is there anything that can be done to stop the focus shifting around? I'd rather that when the user performed some action the screen just simply didn't move.
Cheers - sorry for the monster post! (hope it all makes sense)
Set Focus On A Form With 4 Subforms
Jun 10, 2005My main form has four command buttons that when clicked will make visible one of four subforms.
I can switch freely about the subforms by clicking on each of the buttons. However, when I place the cursor in a subform(and thus give it Focus), and then attempt to select another button to open another subform, I get the dreaded "can't hide a control that has the focus" error message.
What type of code should I use and where exactly should I be putting it?
I've tried setting focus to another subform in the OnClick event of my buttons, but that doesn't seem to be working.
Form Focus Highlight NOT
Jul 7, 2005How do I turn off the highlight feature when a control on a form obtains focus?
Fen
Add A Record To A Sub Form Without Focus
Sep 11, 2006Does anyone know how I can add a record to a subform that is in data sheet view with out giving the subform focus? I have tried the docmd.gotorecord but I keep getting an error that the form is not open. If i set focus to the subform and then use the docmd.gotorecord it works fine but I do not want to set focus to the sub form
View 1 Replies View RelatedForms :: Set Focus To Sub Form?
Sep 14, 2014On a main form I have 2 sub forms. On the main form I have a command button that asks how many guests in a booking and depending on the response populates the subform with Guest Names. However it will only do this if I click on the subform and then click the command button.
I want to include some code that sits behind the command button on the main form that will duplicate the otherwise manual selecting of the sub form. And I am thinking this is a SetFocus procedure.
I have tried this code;
[Forms]![Booking].[SubForm1].SetFocus
where Booking is the name of the form. I do not know whether the Subform is #1
Set Focus When Pop Up Form Closes
Nov 14, 2014I am trying to set the focus back to page 1 of TabCt186 when pop up form frmEditWorkItem closes on clicking a command button.
I have been trying with this line of code but keep getting asked for an object required.
Forms!frmReactiveTracker!TabCtl86.Pages.Item(1).Se tFocus
Setting Focus On A Tabbed Form
Oct 12, 2006What is the syntax for defining the tab that has focus when a tabbed form is opened under various situations?
View 2 Replies View RelatedForms :: How To Capture SSN From First Form To Use As Focus For Second Form
Jul 22, 2013I have two forms that have a unique field (SSN).As I'm working in one form, I want to be able to pull up the other form (which isn't a problem). On the second form pulled up, I want the record to match the first form (SSN) - this is the problem.
I believe SetFocus is what I need to use but I don't know how to capture the SSN from the first form to use as the focus for the second form.
Passing Focus From A Pop Up Form Back To Mainform
Oct 1, 2005I have a form for entering data and to aid people inputting data into a text box I would like a pop up form to appear to enable them to refresh their memories as it were with some information. I was going to use the got focus event of the text box to open the popup but how do i then pass the focus back to the main form and text box without triggering the event again
on the flip side I would like to use the lost focus event to close the sub form as well.
any suggestions greatfully received.
Have a Great Weekend, one and all
Dave
Forms :: Field Focus In Modal Form
Dec 29, 2014How do you set the focus on the first field in a modal form when it opens?
View 3 Replies View RelatedForms :: Setting Form Focus Properly?
Jul 10, 2014I have a Main Form with a tab control. On each of the six tabs is a SubForm that takes up the entire tab. So basically I have a tabbed interface for my forms, just with a bit more control over the layout than if I just opened the forms separately in the Access window.
Anyway, on one of those subforms is a button. When you click it, it opens a separate form in a pop-up window, which is used to find a specific record. Once that record is found, you can click another button, and the idea is that this pop-up window closes, and you return to the underlying form, which jumps to the record you selected.
So far so good. Now, if I am working on my program in Access, and I open that subform's source form separately in its own tab, click the icon to open the record finding form, find a record, and then click the button to load that record, the following code runs, and it runs flawlessly - closing the pop-up window, and passing the information back to the main form which displays the proper record:
Quote:
Private Sub ViewRecord_Click()
Dim RecordID As Integer
RecordID = Me.ID
DoCmd.OpenForm "CDLExam", , , "ID = " & RecordID
DoCmd.Close acForm, "CDLExamCONT", acSaveNo
End Sub
Where my program falls apart is that, in actual use, this form is not open on its own. It's open as a subform on one tab of a tab control on a Main Form. So the third line of code falls apart. Access thinks I want to open CDLExam separately, but it can't because it's already open in the subform, so instead I just end up back at the main window like I want, but the form fails to move to the proper record. Basically, line 3 just doesn't do anything.
How can I make this work? I tried replacing "CDLExam" with the name of the main window, but then it tries to move to the record in the main window, which throws an error as the main window doesn't even have a record source attached to it.
how to refer to the SUBFORM which has CDLExam open, and tell THAT to move to the proper record.
Keeping Focus On Main Form While Queries Are Running
Jul 23, 2005I'm sure there is a simple solution - but everything I have tried hasn't worked.
I have a command button on my main form that opens up a popup form. On the popup form the user makes various selections and clicks on another command button(on the popup form). That button is linked to a macro - that runs several queries.
The problem I am having is when the macro starts to run - the main form is maximized again (so now it doesn't take up the full screen - just a part of the screen) and some of the queries start flashing in front of the form.
I know how to maximize the form once the popup form closes - that's not a problem. I just cant figure out how to keep the focus on the main form and in front of all the queries as they are running.
OLE Object Won't Get Focus In Form/Memo Field Problems
Jul 26, 2006Hi all,
I have added an OLE WordPad object to a form. However, when I use the form, I cannot select/give the object focus to activate it. Even if I right click the object, it give me the correct popup menu. :confused:
I am using this object as I am having troubles with Memo fields. I use a form to update records, one field of which must be greater than 255 characters long. When I press my update button (it just runs some code to turn off warnings, run two simple update queries and the turn the warnings back on) the update process seems to complete. However, if I go to the table/refresh the form contents, only the first 512 characters are displayed and the last few are strange system characters.:confused: This occurs no matter what I do. I was tole that copy/paste operations can mess memo fields up, but I tested this by using a fresh field and typing everything in. Hence I am now trying the OLE object to get around this problem. :confused:
Any ideas peeps??
Cheers,
Matt
Modules & VBA :: Set Focus Method - Filtering Records On A Form
May 27, 2014I'm writing some simple code that will filter the records on a form:
Option Compare Database
Private Sub cmdOpenByAnalyst_Click()
cmbStaffNames.SetFocus
DoCmd.OpenForm "BICReviewForm", acNormal, , "Staff Assigned=" & "'" & cmbStaffNames.Text & "'"
End Sub
Unfortunately, I keep getting a run-time error (3075) that says "Syntax error (missing operator) in query expression 'Staff Assigned = XXXX"
Forms :: Data Entry Form - Set Focus On Tab Control
Sep 10, 2014On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
Forms :: Subform Takes Focus From Top Of Main Form?
Jun 29, 2014I have a form that I created that has a tab control. When the form loads, it automatically sets the focus to a field in the subform. This wouldn't be a problem, except when it does it hides the tabs at the top of the form so I have to go and scroll back up every time I click a tab so that I can see the tabs. Is there a way to adjust this? I have tried hiding a field and setting the focus to it and that didn't work. I also tried setting the focus to the actual tab, but that also did not work.
View 8 Replies View RelatedModules & VBA :: Setting Focus To Non Default Instance Of A Form
Mar 21, 2014How to set focus to a non Default instance of a form.
Environment
A2007 ADP Project
Document Window Option - Tabbed Documents
MS SQL 2012 Express DB
Windows 7 64 Bit
I using Allen Browne's method to open more that one version of form, storing each form object in a collection declared in a module. No problem there.
Now I'm trying to add a command button on an form to set focus to one of these non-default instances already open.
The form I am trying to set focus to has a the following related properties
Default View: Split Form
Pop-up: No
Modal: No
The form that has the command button on it is of the same type.
Here is the code I've tried:
'Code on Calling Form
Private Sub cmdProjectList_Click()
Dim FunctionResult As Boolean
If AppForms.GoToForm("ProjectList") = False Then
AppForms.Load_ProjectList
[Code] .....
The code compiles and executes with seemingly no problems. It finds the form loaded, then cycles though and finds the form in Forms but the SetFocus call seems to do nothing. When I run the code against a defualt instance ( one not opened using Allen Browne's method) it works fine and sets focus to it as expected.
Modules & VBA :: Change Focus To Another Form And Show Only Certain Records
Oct 23, 2013How to Change focus to another form and show only certain records...
View 1 Replies View RelatedForms :: No Focus For Unbound TextBox In Continuous Form
Oct 27, 2014I have unbound TextBox in continuous form and I would like that it never get focus. In property I specified Enabled=No and Locked=Yes. But it doesn't work.
View 8 Replies View RelatedForms :: Move Focus From Last Field Of Subform To Another Field On Main Form
Aug 19, 2015I am currently stuck on set focus property. I have a main from with nested subform. I am trying to move the focus from last field of the subform to another field on the main form.
Customers(mfrm)....>Addresses(sfrm)...>Orders(sfrm Add)......>OrdDetails(sfrmOrders)
Now I have a field name [Securedesign] in frmOrderdetails and I want the tab order to navigate to field [CustomerID] in frmAddresses which is a subform to frmCustomers.
Set Focus Nothing?
Mar 24, 2005I have several forms and subforms that display data, but are not used for data entry. The first textbox on every form gets the focus on open. I'm sure I've seen some way to open the form with no focus on any control!
Can someone help me remember?
Thanks,
Sup
Get Focus
Apr 15, 2005thanks for helping.
how do i get a record to get focus when a form opens or a button is clicked on?
thanks again