Forcing A Value On Combo Box By Clicking Form Button?

Nov 4, 2014

I use a Frm1 which updates my Tbl1. By clicking on this Bt1 of the Frm1 the record is duplicated on purpose having enabled and disabled fields. While Frm1 shows the duplicated record (so it is open) I can change it and save it as needed. However the Frm1 loads having an enabled Cbo1 which normally allows the regular user to pick any value A,B,C or D.

What I would like to have is a line code under the Bt1 click event able to set the value "D" on the duplicated record only. I can not write it under the load form event because I need value "D" set on the combo only when I click the Bt1. Regular user still should be able to select between A,B,C or D when he loads the Frm1 to input a new record.

I tried Me.cbo1="D", also tried Me.cbo1.column(1)="D" under the Bt1 click event and both of them failed. What have I done wrong? How can I get it done?

View Replies


ADVERTISEMENT

Close Form Upon Clicking A Comman Button

Aug 28, 2005

I have a startup splash screen with a "OK" button, similar to Nortwind database. The OK button works as far as opening my switchboard page. But how do I get the Splash screen to close after I click the OK button? So I can see my switchboard page.

View 2 Replies View Related

Forms :: Filter Form Only By Clicking Button

Jul 22, 2013

Every Page has its on data source based on query, and they aren't related to Parent form or to each other. I want to set few buttons on every Page which would filter records in predefined way.Ex: one page has calculated field named [Za platiti]. It has numeric values form 0 up. I want to set one button to filter only records where field [Za platiti] is greater then 0, and other butt to filter only records where [Za platiti] is = 0. Other filters based on combo box I use regularly.

View 6 Replies View Related

Forms :: Syntax Error When Clicking On Form Button?

Apr 1, 2014

I have a program that has a "GC" Button that I click on which takes me to a General Contractor Form. It works perfectly unless the Firm has an apostrophe in it's name. For example "D'Agostino". (refer to attached DAgostino1.jpg). When I click on the GC button, I get the attached Syntax error, (Syntax on DAgostiono.jpg).

The third attachment (GC Firm Button Code.jpg) shows the VBC for this button.

how to fix this error?

View 7 Replies View Related

Forms :: Prevent Bound Form From Updating Records Before Clicking On Save Button

Oct 31, 2014

I am working on a web database with a form which is bound to an underlying web table where the submissions occur.My challenge is that the fields on the form get submitted to the table even before the submit button is clicked regardless of whether the form was completely filled.

My request is that I want the form to only submit to the submission table only when the submit button is clicked.When I searched on the net, the only solutions I got are VBA written code but my web database cannot use VBA code.

VBA code:

Option Compare Database
Option Explicit
Private blnGood As Boolean
Private Sub cmdSave_Click()
blnGood = True
Call DoCmd.RunCommand(acCmdSaveRecord)
blnGood = False
End Sub

[code]....

View 1 Replies View Related

Button Disabled By Clicking Itself?????

Oct 13, 2006

Can I make a button, say "command01" deactive by clicking it.

i.e.
OnClick of command01 => command01.enabled=false

is this possible?

View 5 Replies View Related

Make-Table_Query; No Notification After Clicking A Button

Sep 24, 2007

Question:
I have a make-table query which is runned when clicking on a button in a form.
Of course after clicking the button the following notifications appear:

1) You are about to run a make-table query that will modify the data in your table (yes, no help)
2) (if the table exists) The Existing Table <<tablename>> will be delted before you run the query (yes, no)
3) your are about to paste 1 row(s) into a new table (yes, no)

How can i make it possible that on forehand all three questions are "yes", so that the user does not see these questions, but the table is filled with the relevant information and can be used?

Thanks in advance for your answers/reactions/help

View 3 Replies View Related

Forms :: How To Insert Data By Clicking Button

Feb 11, 2014

I am new with ms Access. I am using 2013 version and stuck with "pretty" easy task.

When I create the form, the values are inserted/updated constatly as I leave the input components. However I would like to insert/update the record only when I click the button. How to do that?

View 5 Replies View Related

Way To Create A New Record By Clicking A Command Button

Mar 13, 2012

Is there a way to create a new record by clicking a command button but to show the same text boxes shown in the attachment in the next record.

View 1 Replies View Related

Load Print Wizard After Clicking Command Button

Nov 3, 2005

hey all, I am trying to load a print wizard after clicking on a command button. I am trying to use my filtered data to select specific fields to print. On the fly kind of report. I need to have the ability to use my filtered data to create a specific report. Any ideas?? Thanks

View 7 Replies View Related

Modules & VBA :: Event Not Triggering When Clicking Search Button

May 23, 2014

I have the below VBA in a from for it to filter the records below based on the criteria:

Private Sub Search_Click()
Dim strWhere As String
strWhere = IIf(Len(Me.AssignedTo & "") <> 0, "([AssignedTo] Like ""*" & Me.AssignedTo & "*"") AND", "") & _
IIf(Len(Me.OpenedBy & "") <> 0, "([OpenedBy] Like ""*" & Me.OpenedBy & "*"") AND", "") & _
IIf(Len(Me.Status & "") <> 0, "([Status] Like ""*" & Me.Status & "*"") AND", "") & _

[Code] ....

When I click the search button nothing happens, is there something wrong with my code??

View 4 Replies View Related

Forcing Form Elements To Be Updated

Nov 2, 2005

Hi,

I have a form with a couple of sub forms, one of the sub forms only has a check box and a txt field and both are required before moving on to another record.

I have this following code that works partly, but it only works if one of the fields have info entered. It doesn't however stop the user from tabing through the sub form without entering 'any' data in either one.

---------------------------------------

Private Sub Form_BeforeUpdate(Cancel As Integer)
If Trim(Me!txtContactAgentName & "") = "" Then 'Validate Name Field
MsgBox "Gotta Enter Your Name!"
Me!txtContactAgentName.SetFocus
Cancel = True
ElseIf Me!ynCCContactLogLeft <> True Then 'Validate CheckBox
MsgBox "Gotta Have a checkmark in Logged!"
Cancel = True
End If
End Sub
---------------------------------------------
Also the below throws up an error when I know it's got all the correct information.
------------------------------------
Private Sub txtContactAgentName_LostFocus()
Forms.frmAllCustInfo.SetFocus
Forms.frmAllCustInfo![AddNewCustomerRecord].SetFocus
End Sub

-------------------------------------

Can anyone advise?

thanks in advance

View 4 Replies View Related

Form Scrolls Down When Clicking From Tab To Tab

Mar 20, 2006

Hi there,

I have a form that has several tabs and in one of the tabs, the subform is very long. When I click from tab to tab, the main form scrolls down and the list of tabs disappears. So, when I am done with entering the subform, I have to scroll up the page to see the tabs in order to click on the next tab. I am hoping if someone has an idea how to stop the main form from scroll down each time I click on a tab.

View 1 Replies View Related

Hide Fields In Main Form By Clicking Sub Form

Apr 11, 2005

I have one main form with 3 tabulated sub forms.
My main form consists of two fields.
When the user clicks tab 2 (subform 2) or tab 3 (subform 3) the main fields should hide

I tried to achieve this by using the on click event at the tabbed forms. I referenced the two main fields and used the visible property followed by a form requery. It didn't work.

thanks in advance

View 1 Replies View Related

Forms :: Opening A Form By Clicking A Field From Another Form

Jul 18, 2013

I'm creating a database to track new policies request. I have a form in datasheet view that displays a list for all Initial Review and Draft status. I would like to click (... or maybe double click) on the Policy Name field that will display all fields into single form that is link to PolicyID ... to update any info needed. In other words i want to click on that record to be display in actual form.

Private Sub PolicyName_Click()
Dim stDoc As String
Dim stWhere As String
Dim strsql As String
Dim DB As DAO.Database

[code]....

View 1 Replies View Related

Modules & VBA :: Using Form Combo Box To Control Subform Button Visible Or Not?

Nov 24, 2013

How to use the combo box from the form to control subform button or textbox visible or not?

View 5 Replies View Related

Forms :: Get Form To Loop Through After Clicking Next?

Apr 21, 2015

I am trying to get a form to loop through after a click the next. I have looked around in this site, and ive not found the answers im looking for. What im trying to do is I have navigation records for my form, but when I reach the last record, I would like it to loop.

View 14 Replies View Related

Form Clicking Requires 2 Clicks To Go To Next Record!?!?

Feb 20, 2007

Hey Readers,

I'm using MS OFFICE 2003...MS ACCESS

I am having a problem in my one form where I have to click on the "go to next record arrow" twice before it displays the next record. (even on the "create new record" it requires 2 clicks)

All other forms I have display the next record for only a single click on the arrow.

Is there something unique in the properties of the form in question that needs to be changed so that a single click displays the next record?

Any help would be greatly appreciated.

Thanks,
Duncan

View 5 Replies View Related

Sorting Data In A Form By Clicking On The Header

Aug 31, 2006

Is there a way to sort data in a form by clicking on a corresponding control (e.g. label/txtbox) in the FormHeader?

View 5 Replies View Related

Forms :: Main Form Locked After Clicking On Subform?

Dec 25, 2013

I have a Main Form which is essentially the based on my child table called tblTaskHistory. The Main Form has a subForm which is based on the parent table called tblTasks. I am using SQL queries to feed the combo box recordsource that is located on the Main Form. The After Update for the combo box populates the subForm which allows the users to look at details of a task before he/she "accepts" it. The problem is that when he/she clicks on the subForm to view the details of the task the Main Form locks up. The user, after interacting with the subForm, cannot make an edit on Main Form now. The user has to close the Main Form and then reopen it to perform the "accept" action. The form works absolutely as intended - that is if the user doesn't click on the subForm - however once he/she clicks on the subForm the Main Form locks up.

View 1 Replies View Related

Forms :: Cannot Open Form By Double Clicking List Box

May 3, 2014

When double click the entries given in the attached database I cannot open the correct form. it gives parameter value.

View 4 Replies View Related

Forms :: Show / Hide Main Form Buttons When Clicking Into Subform

Dec 11, 2013

I'm currently building a database in Access 2013. I've used Access many years ago, and not really in anger since maybe 2003, so I've been re-learning quite a lot. Here's an overview of my scenario, and issue:

The main purpose of my database is to allow engineers to log various bits of information when building, servicing and testing manufactured products for offshore exploration. Because some of the engineering team aren't so great with data entry etc, I've decided that, rather than deleting data, I'm going to use a 'deleted' flag: user clicks what he considers to be a delete button, but in reality an update query will simply update the flag and, because the form is built on a query which includes a 'where deleted = 0' filter, it'll no longer be shown. This will allow us more control over the data and will also allow me to check that everything is running okay.

My main forms include a number of subforms, including one which includes a second tier of nested form: Pin Maps for (electrical) Connectors.

What I need to achieve is fairly straightforward: as the user navigates around the form, I'd like a 'delete' button which is specific to that subform to become visible and for any other 'delete' buttons to become hidden. Once tested, the buttons would be 'stacked' in the same position at the top of the main form, so the user just thinks they're deleting the relevant record in the sub, or main, form.

View 7 Replies View Related

Forcing A Zero Value

Apr 13, 2006

I have a quick query question. I have a table that lists employees and workcodes and time spent at the workcode, by date. There are multiple workcodes and I'm trying to create a query that lists each employee and total time spent in each workcode. The poblem I'm having is this: Unless the agent spent time in all the workcodes, he doesn't show up on the query.

For instance: Agent A, spent 200 minutes in Code A, 220 minutes in Code B, and 10 minutes in Code C. Agent A shows up fine in the query. Agent B, though, spent all 430 minutes in Code A. He doesn't show up at all.

I think it's also worth mentioning the format the information comes to me in. It's an Excel file broken up into 4 columns, Date, Agent, Code, and Duration. As much as I would like it to be Date, Agent, Code A, Code B, ect, I have no control or say in its format.

Any help or ideas would be greatly appreciated.

View 1 Replies View Related

Forms :: Clicking A Record On A Datasheet Form To Open Record In A Pop-up

Apr 23, 2013

I have a form "IntUnderwriterSearchByName" which is based on the query "Search by Name". This form opens with a parameter (please enter name of broker) and is set out like a datasheet with the following fields- "Broker Name", "Domicile", "Broker Code" and a couple of others. I'd like to be able to click on a record and open the form "IntUnderwriterPopUp" so that the details of that specified record are displayed.

Broker Code is what I'd like the form to look for and this Broker Code is unique for every one of the 900 or so records. This code can be numerical e.g. 01233 but also can be a mixture of both e.g. EU2885. It is also worth noting that this code is not the primary key- i have an autonumber (called ID) that does this- but this field does not appear on the form.

View 7 Replies View Related

Open Record In Main Form By Clicking Record ID In Subform

Dec 16, 2014

I am creating an events database. In my main form, I have all the details of a single event (billing code, fees, customer, support personnel, etc.). Then, I have a subform (form view) that lists each of the other services which share an event ID (this ID comes from a separate, unrelated events management suite). In the subform, I display the most-commonly-edited fields so that they are editable without navigating to a different record.

However, there will be instances where it becomes necessary to navigate to one of the records listed in the subform. I would like to make this a quick process by just clicking on the primary key in the subform, and have the corresponding record appear in the main form.

In my searches I've found a common suggestion to use a DoCmd.OpenForm method where the form opens to that specific record -- in effect filtering by the primary key number. I don't prefer this method because it disables the ability to navigate to other records using the previous, next, find records, (etc.) buttons without closing and re-opening the form.

Is there a way to make the main form 'jump' to a specific record by clicking on a control in the subform, without limiting the ability to navigate in the main form?

View 10 Replies View Related

Update A Form Field By Double Clicking A Query Field

Apr 25, 2013

I have 3 peices of data that I am working with: Group number, plans and benefit elections. On my form I have fields for the group number and plan and 2 queries. When I enter a group number the first query displays a list of plan descriptions for that group. From there I can enter the plan description into the form's plan field and that runs the second query to give me a list of valid elections for that plan. This all works fine but I want to make the plan selection a little less tedious. What I would like is to be able to double click the query field housing the plan description and have it copied to the form's plan field. I could use the ID instead of the plan description but I work in a production environment and very key stroke counts so I would really like to have a simple double click process.

Is this even possible? If so how would I set that up? I tried using the double click on event macro builder but it does not seem to have this kind of option.

My form contains fields for group number and Plan. The same form houses 2 querys, one that pulls plans based on the group number and the other to pull elections based on the plan field (not the plan query). Would like to double click a plan within the plan query and have that description populated into the form's plan field.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved