Please see the attached. I am receiving a fatal error when I attempt filtering my report. It reads "Data Type Mismatch". Can someone take a look at this and tell me what I need to do to make this work ???
View RepliesI need to be able to embed an interactive word document in an access form. The need is to put in text that has underlines and strikethroughs to indicate name changes to policies.
The user creates a new proposed update by designating the policy number but I need a word file attached to this update that can show more punctuation than access can show.
Of course I want to make this as automated as possible so the user doesn't have to work in two different places to get this done.
Including check boxes (representing the query fields) in an interactive access form, in order to decide which fields should be visible.
I think the solution is building an invent in VBA for each check box, however I'm not an expert in Access VBA and don't know how to write the code.
In the example that I've uploaded, in the Form1, when I run the query, all fields are displayed, i.e. VENDOR, REGION, CUSTOMER and MATERIAL are displayed. How can I manage it in the form with a listbox to display only the REGION or MATERIAL for instance.
what i have is a form with a report inside of it (i just drug it in and dropped it). the report filters off of a field in the form. So upon opening the form, the report filters correctly. however as i browse through the form records, the report doesn't update. i can't figure out how to get it to update with the form its on. i've tried report.requery in the form_current area but it doesn't seem to re-apply the filter.
View 2 Replies View RelatedHi!
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
Thanks.
I have a report "Work Order Details" that that is based on a query and opens along with a form that is used to set filters. Based on samples I have looked at and reading, I cannot figure out what is missing. When I select my item form one of 5 unbound combo box 's and click the "Set filter" button, it brings up a paramter box?? If I cancel out the box, I still don't get a result. Just for the heck of it, I filled in a name in the paramter box, still no luck. The report property has "Filter On" as YES. The close button, clear button, and drops downs operate perfectly.
Here is the On Click Event info from my "set filter" button:
Private Sub Command28_Click()
Dim strSQL As String, intCounter As Integer
'Build SQL String
For intCounter = 1 To 5
If Me("Filter" & intCounter) <> "" Then
strSQL = strSQL & "[" & Me("Filter" & intCounter).Tag & "] " & " = " & Chr(34) & Me("Filter" & intCounter) & Chr(34) & " And "
End If
Next
If strSQL <> "" Then
'Strip Last " And "
strSQL = left(strSQL, (Len(strSQL) - 5))
'Set the Filter property
Reports![Work Order Details].Filter = strSQL
Reports![Work Order Details].FilterOn = True
End If
End Sub
Hello all.
I would like to place a "Print Report" button on my primary form that allows a Filter By Selection (OR Filter By Form) first, then when selecting the button will view or print my already-created primary report but only for the records that were selected by the filter.
I looked and looked, but am not sure even what to search for in the forum. I know this has to be simple.
Form is called PrimaryForm.
Report is called PrimaryReport.
Thank you.
Tom
My problem I am having is that in my database you can click around to different customers info on forms and from there you can click on a button to get to another form that lists all of the customers vehicles. From there I have a billing report that I created and I am trying to filter the report to get what I want on there.
I have been searching around and have found codes to filter reports so that right now I have it when I click on Billing Report it filters by the customers form i am on. But now where i am having some issues is that I am also looking to filter by a yes/no field so that anything clicked yes for that customer will be filtered to show on this report.
When I have a value in "WorkCenter" everything works great and graph looks fine. When I leave blank in order to see all records, I get a blank graph.
Here's the code:
Private Sub Open_Downtime_Graph_Click()
Dim strCriteria As String
If IsNull(Me.WorkCenter) Then
strCriteria = "[WorkCenter] Like '*'"
[Code] .....
I am using a form to filter information so that I can open a report. The report displays information pertaining job costs. Each month the company I work for records their labor, costs, and travel in a form with a year to date amount. Right now, I am having a problem opening up a report for one specific job and a specific month. So what I want the dialogue box to do is to pick from a list of jobs then pick from a list of months, click a button that prompts a preview of the report.
View 14 Replies View RelatedI have a report based on a query, the report loads filter based on dates input to the query from Form1 when report loads. I want to filter this report further from a listbox on form2, but I want the listbox rowsource to populate based on a field in the loaded report. Is this possible?
View 2 Replies View RelatedI would like to have a user enter a start date and an end date into two
textboxes on a form. The two dates will be used to query a table. I
would then like to print a report that was created from that query.
Here is the query created as a stored procedure:
SELECT Transactions.*, Hoods.*
FROM Hoods INNER JOIN Transactions ON
[Hoods].[ID]=[Transactions].[BoxID]
WHERE ([Transactions].[Date] Between [@StartDate] And [@EndDate])
ORDER BY [Transactions].[Date];
What would be the best way to pass txtStartDate to @StartDate and
txtEndDate to @EndDate in the VBA code of the form? How would I open or
print the report created from that query filtered on that date range?
Any suggestions? Am I going about it wrong? Should I have created the
report from the above query, or should I do it another way? Can anyone
direct me to some code that does all of the above or something
similiar?
Thanks.
I am able to filter a data on a continuous form using drop downs and then the following code attached to a cmdbutton to create a report of the filtered data.
Code:
Private Sub Command30_Click()
Dim strWhere As String
If Me.Dirty Then Me.Dirty = False
If Me.FilterOn Then strWhere = Me.Filter
DoCmd.OpenReport "rptconveyorerrors", acViewReport, , strWhere
End Sub
On the same form where I filter the data i can sort it by clicking the headings aswell, however when i generate the report using the above VBA it doesn't take the sort with it and just generates it without the sort.
I am using the following VBA to sort my form
Code:
Me.OrderByOn = True
If Me.OrderBy = "[empname] DESC" Then
Me.OrderBy = "[empname] ASC"
Else
Me.OrderBy = "[empname] DESC"
End If
Me.Refresh
I thought it may be possible to use the following sort of VBA to pass the sort however i cant get it to work:
Code:
Private Sub Command30_Click()
Dim strOrder As String
Dim strWhere As String
If Me.Dirty Then Me.Dirty = False
If Me.FilterOn Then strWhere = Me.Filter
If Me.OrderByOn Then strOrder=Me.OrderByOn
hi,
I have a plan to a list that the user can sort the records with up/down buttons. I'm not to sure how to do this in Access. I need some column to sort by. I could simply make a marco to a raise and lower this.
Then there is the other records to neighboring the sort record. And if the record is the first/last in the list. I'm a bit new to access so i don't know all the tricks yet.
thanks
I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.
The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?
I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.
For example:
ClientID: 1 = Client: ABC Corp
In my report ClientID 1's data is grouped along with all other client ID's.
In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...
I have a report based on a query that I put inside a form. What I want to do is create 4 comboboxes from which users can choose options that will filter the report without leaving the form or opening the report in a separate window. Also, I want to make the filters dependent on each other, meaning if a select option A on combobox 1, the options i will select on combobox 2 will only be based on the earlier filter on combobox 1 ...
So far I'm able to do at least 2 of the comboboxes to filter the report, but they aren't based on which one was used to filter the report first. So if i filter the records by choosing option A on combobox 1, combobox 2 will still filter every record.
here's my 2 codes so far:
Private Sub cboLocation_AfterUpdate()
On Error GoTo Proc_Error
If IsNull(Me.cboLocation) Then
Me.qrySalesByLocation.Report.Filter = ""
Me.qrySalesByLocation.Report.FilterOn = False
Me.qrySalesByLocation.Report.Requery
[code]....
the other 2 comboboxes, I can't apply the same code cause the enter parameter dialog keeps popping out.
I'm trying to use a command button in a form to filter and open a report. I am able to get it to open the report, but I cannot get it to filter the report based on a combobox in the form. I've tried every combination of code I could think of and find. Here is what I currently have:
Code:
Private Sub FilterReport_Click()
DoCmd.OpenReport "Report", acViewReport, "First Name='" & Me.FName & "'"
End Sub
Code:
Option Compare Database
Private Sub Report_Open(Cancel As Integer)
Me.RecordSource = Me.FName
End Sub
"FilterReport" = Form Button
"Report" = Report
"First Name" = Report Field
"FName" = Form Combo Box
I am using MS Acess2000 and need to make a report that will be passed around with production work. My primary key is the invoice number of the work order. Currently to open an invoice i have a macro, attached to a query with the following qualifiers; Like [Enter invoice]
This pulls up the current record fine.
for the form and flags the folloing in the property filter sectin of the form
(((([CustomerTableMasterRef].[Invoice]) Like [Enter invoice])))
PART 2
Now I am trying to use microsofts how to filter a report using a forms filter...
This picks up on the Invoice query as shown above but does not just insert the query results...
Is there better code or another way to approach this... Currently i am using:
Name:cmdOpenReport
Caption: Open Report
OnClick: [Event Procedure]
Private Sub CmdOpenReport_Click()
If Me.Filter = "" Then
MsgBox "Open an Invoice First"
Else
DoCmd.OpenReport "rptCustomers", acViewPreview, , Me.Filter
End If
End Sub
Using this code not only does my report not detect the correct fields to import data (no data is filled in) but it requerys the invoice or atleast should, which I could do with out all of that code...
Where should i go from here?
I have been searching the web for a solution to this problem. I have created a scheduled task on Windows 7 to automatically run a macro from a command line, however, it seems to only run when the user is logged onto the machine. Is there a way to run Access without the interactive logon? I would rather not leave the machine logged in with this account, but if that is the only solution, so be it.
View 7 Replies View RelatedThe company I work for has branches in multiple states and we use Access to organize all their tax requirements. We print out reports for every month, and my company would like to create a pop-up window that will let us filter the report when it starts up so that it automatically shows only the dates that we wish it to. How do I create a filter that pops-up when the report starts?
View 1 Replies View RelatedHow can I create a "Filter Button" on a form and filter my records? I create a textbox on a form and a filter button on the right. Then I click the filter futton, the filter function will search/match the content in the box through the datasheet. And then the results of the filtering will be pop up on the split form datasheet.
View 3 Replies View RelatedI have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
Hi there,
I have a QBF, and when user inputs the search criteria and clicks on print button, a report prints out based on that search criteria. I would like that report to include the search criteria as well. How can I do that?
I am not so good in Access, so please be as much specific as one can get, when suggesting a solution.
Thank you so much.
I'm a new user with access and I'm trying to build a "Status" report based on criteria within the database.
I've setup a form where the user would choose which "Status" they want to print on the report but in all my reading
(two days worth) I can't figure out how I should accomplish this task.
I'm attaching the database and the form is "frmStatusReport". If someone could take a look at it and give me an
idea of the best possible solution, it would be greatly appreciated.
Maybe someday I can pass my knowledge on to another newbie...
THis has to be an easy issue.
I have a subform that in the on curren event i passes the ClassId out to my main for in an unbound text box
Forms![Student]![ClassID] = Me![ClassID]
I know this part works
I then have a command button that should pass ClassID to a report so that it can be filtered. Here is the on_click code
Private Sub cmdReprintAccom_Click()
On Error GoTo Err_cmdReprintAccom_Click
Dim stDocName As String
Dim strReptCriteria As String
strReptCriteria = ClassID
stDocName = "Forms - Accomodations"
DoCmd.OpenReport stDocName, acViewPreview, , _
"[ClassID] = '" & strReptCriteria & "'"
My problem is that I keep getting a type mismatch error. I know that it is because CLassID is a number and it is getting passed as a string i just can't figure out the syntax to the highlighted code.