I have a form, that has some text fields and a couple calendars for the user to select the dates from.
What I would like to happen is, after the user enteres the data, and they hit submit. I want the form to go back to a new entry, but it's not quite doing this.
The data they type in dissapears after submit, but the calendars seem to hold whatever date they used. And when they try and enter another entry, they can't select the same date as before. They have to hit a different date first, before it allows them to re-enter the same day.
Anyone know why? Is there a way to make the form refresh, or reload after they hit submit? So it will allow them to enter something for the same day?
I have a form which is used in the Data Entry mode. I have a button on it called SUBMIT which closes the form. Of course in actual fact, as soon as data is entered on the form, it goes into the relevant tables, even if the form is closed without using the SUBMIT button.
I want the SUBMIT button to actually work like a submit button, so that no data entered in the form is actually entered into the underlying queries or tables UNLESS the SUBMIT button is clicked. Is it possible to do this?
Alternatively, if there could be a MACRO or something so that if the form is closed in any other way, the data just entered is deleted.
I have been creating an inventory control system for my small business. I am looking for a code that will generate to another form. So for example if I take out 4 aprons from the first row by hitting the '-1' button 4 times leaving 46 in total how do I generate the information from one form to another by hitting that submit button.
My other form shows Product ID, Date Taken, Product Description, Employee who has taken it, Amount Taken, and Total left in inventory. I need the correct information to show accordingly in the Inventory control form.
I have a form (called User_Input)with 2 text boxes, 5 combo boxes and a Submit button, which is bound to a table (called Submssion table) i.e the form submits its entries into the table called Submission.
I want the submit button on the form to work based on this condition:
1. Check current submission of four fields (corresponding to entries from 4 out of the 5 combo boxes on the form) in the table and confirm if the current selection on the form already occurs in the table up to two times. If this is the case, the Message Box should pop up on the form informing user to make another selection as maximum number of entries for that particular selection is already in the Submission table.
2. The checks for the four fields will be done simultaneously as the selection will be done together on the same form.
3. However, if the entries on the Submission table is not up to 2, the entries should be saved to the table and Messagebox should display "Thank you for your Submission"
I need to use Macros for this being a web database which will be published using Sharepoint and VB is incompatible with the web database.
I have this database with the purpose to storage all the tasks that are done in my team. I have a table named Tasks with all their fields. Now, I would like to set a more user friendly way for clients to update this table. I have created another table with a list of most common tasks, so when a client wants to add their tasks list they can choose one of this tasks and add it to the list. I had created a form with multiple items that contains the common tasks and next to each task a button that adds the information they choose into the table "Tasks". This works just fine. However, I would like to add a single button at the top to add all the tasks instead of having to choose one after one.
The "Add All tasks" button has this code:
Private Sub Command79_Click() Dim valSelect As Variant, MyDB As DAO.Database, MyRS As DAO.Recordset Set MyDB = CurrentDb() Set MyRS = MyDB.OpenRecordset("Tasks", dbOpenDynaset)
I double click a combo box which takes me to a new form. e.g. a purchase order form does not have an employee so they need to be added. When the employee form is closed i would like to refresh to combo box so the new employee appears in the combo box.
Hi all, How are you? I have a small problem... I have a form with 3 textboxes and 1 button. When filling these textboxes, and clicking the button, a record will be added to a table. I want when I click the button, the record to be added to the table with removing the the old record from the 3 textboxes for the new record to be added.
I have some dLookUp text boxes on a form. They don't refresh though till after I change the record I am on. There are only two fields on the form that actually change the dLookUp boxes and they are both combo boxes.
Is there some refresh code I can put in the combo boxes so that the form refreshes after someone changes data in the two combo boxes?
I encountered some weird symptons with my Access forms. I am using the form to display images(done by setting the OnCurrent and After Update property).
When my PC is just powered on, and i try to load say form "ENGLISH". Form "ENGLISH" will appear, but the focus will switch in between form ENGLISH and the MS ACCESS program window. This action will onli settle down after abt 10 secs.
When the ENGLISH form is loaded, i will attempt to switch from one record to another, but the same thing occurs again. IT will load/refresh for abt 10seconds, with the focus toggling btwn ENGLISH FORM n MS Access.. IN addition, it opens a second copy of FORM "ENGLISH" in the background as can be seen on my taskbar. When i close my 1st form ENGLISH and i attempt to close the 2nd FORM tat is appearing on the taskbar, there will be an error msg, English : MSACCESS.EXE-Application Error, Instruction at....(refer to the attached jpeg file for detailed error location)
Y is it tat this weird behaviour onli applies to the forms tat are used to display images but not those normal forms tat contains of purely text?
The entire behaviour will be eliminated after i close MS access, and reload the DB abt twice.....
I have a form that has a status, and a button that changes that status when clicked. This should remove the record from the current form and put it in another.
Is there anyway I can refresh the form after that button is clicked to show the record actually dissapearing instead of having to close/reopen the form?
I am stumped as to how to get a form to update/refresh. Heres what I have! My main form:[Daily Log From] is opened, with a subform:[DailyDSQry subform] populated by a Query. This form has a command button that opens another form: [NewDSLog] in "acAdd","acDialog". What I need is: when the [NewDSLog] form closes, the [DailyDSQry Subform] needs to requery/update so that it displays the new entry.
I have tried the following in a command "CLOSE" button in form [NewDSLog]: docmd.Runcommand AcCmdRecordSave Me!Forms![Daily Log]![DailyDSQry subform].Refesh Me!Forms![DailyDSQry subform].[Query].!Requery doCmd.close
but no LUCK.....Keep getting errors Any Ideas Thanks all, I do appreciate the help Enviva
I have a form containing a subform, as a datasheet. The form displays the full details of whichever record I select in the subform.
When I click on a button to delete a record that I've selected in the subform, it vanishes and the subform row that displayed it is cleared. I have a figure displaying the total count of rows in the subform (thanks to Ghudson for that one) and this also reflects the change. the form, however, still displays the details it previously did.
As the last line in the code behind the button I have:
[Forms]![form name].Requery
however, when the code runs and hits this line, it displays a message that says
'Runtime Error 3167: Record is deleted'
Without this line, the form doesn't refresh (obviously) and I get no error messages, but when I next select any row in the subform I get a message:
'Record is Deleted'
and all the fields in the form display 'Deleted#'. Selecting another row fixes the problem.
It seems pretty clear that I'm not refreshing the form correctly, but in spite of searching the forum and finding a fair few threads on this topic I can't work out the syntax I should be using.
Hopefully, someone more knowledgable tham me can point me in the right direction.
Okay, here is the situation that is slowly driving me crazy.Form: Clients ACTIVESubform: Clients ACTIVE - closureReport: Clients ACTIVE - closure (created by a save as by the subform)My database was created to keep track of clients in a centre. The clients files are eventually closed by a checkbox. Then a number of reasons are inputted in as for why the file is now closed by means of a combo box (lost contact, graduated, etc). After the files are closed, the users want to print a simple one-page report that they can put in their manual (paper) file. I created a subform that allows the users to preview what will be on the resulting report. I also created a button that they can click to print the report.NOW for the problem,The report will not show the new information (closed checkbox = yes, reason for closure, notes about closure, etc). I can't refresh because then the client no longer shows up in the form as it only includes ACTIVE aka open files aka Closed=No.Here is my coding for the button that I have:Private Sub Closure_Click()On Error GoTo Err_Printable_Click Dim stDocName As String stDocName = "Clients ACTIVE - closure" stLinkCriteria = "[StudentNumber]=" & "'" & Me![StudentNumber] & "'" DoCmd.OpenReport stDocName, acNormal, , stLinkCriteria Exit_Printable_Click: Exit SubErr_Printable_Click: MsgBox Err.Description Resume Exit_Printable_ClickEnd SubHELP ANYONE??? :) My only idea is to do this is something like where is matches the student numbers, refreshes the form, and prints the report. BUT no matter where I put the refresh or requery command, it doesn't work. It ends up printing a blank report as it can not find the student number in the ACTIVE form as the client is now closed.
I've got a form built on a tab control. The form is a sales order form with multiple tabs. One of the tabs is used to enter shipping information and cost. The problem I'm having is:
A field I have added to this tab which is a stored total of the sales order total plus the shipping charge is not showing up after I enter the shipping charge until I switch tabs and return back to the shipping tab.
It's been a while since I've dealt with these refreshing problems. Which event is happening when a tab control is switched so I can call it to trigger my field total?
Btw, the shipping information on that tab is a subform.
One of the directors of the company I work for would like to have a large screen display the current status of jobs that my database stores. To cut a long story short the table he is interested in is called tblJobsLogging and is updated manually by our laboratory on a regular basis as jobs are completed using a form linked to a query in turn linked to that table.
Think fast food chain order monitor. He wants to be able to look up from his desk and see the progress directly in front of him at any point.
Is there any way that I can have an access form displaying these records in a datasheet view which continuously refreshes every X seconds / minutes or updates as a record is updated in the underlying table?
I am having some minor issues with my current database. The way it works currently is having a MainMenu where you can either go to customers/ ProductList/ Product OR ProductList straight away. I have a CustomerT and a ProductT. I have made a Query where I link the two tabels to have the feature showing the customer to the specific product with the criteria: "Kunde: [CustomerName] & " " & [Subsidiary]" on the form I have a txtsearch (Textbox) connected to a button with this coding:
Private Sub Kommandoknap49_Click() Dim strsearch As String Dim strText As String If (Len(txtsearch.Value) > 0) Then strText = Me.txtsearch.Value
[code]....
This allows me to search for text in each of the boxes with information on the single product(s) for example searching for Kunde (Customer in Danish) or ProduktNavn (Name of product) HOWEVER when I do this the "Kunde" turns into "#Navn?" c..If i reopen the Form it will show with the right information. I also tried to code the "Byactivation" to
i need to be able to refresh the data on a form, when i click a button in a second form.
the onclick events runs some sql that alters the data that form a is based on, then closes form b. The changes are not reflected on form a until the form is reopened or i use a button on the form a to refresh.
is there anyway to achieve this? surely there must be an easier way than closing a form and reopening?
I have a label that I use to display certain information that will not refresh for new, but existing, records. I have prepaired/reduced an zipped Access 2003 mdb file. Would it be possible to submit this file for review in order to locate the refresh problem? The size of the file is 598KB; what is the size limitations?
Hey all, I'm in a pickle and hopefully you guys could help me out. My users are old and scared. They require things made in a familiar fashion which slows people in the know, but it's what makes them work well.My most recent request from them requires me to make a "Submit" button for one of the forms that way they "know" the data is in the table. However, I know of no way to hold data cached until a button is pressed.Is there a way to do such a thing? Cache data until a button is pressed? To the best of my very limited knowledge, data entry takes effect immediately.
Before i forget: Sorry about my three identical posts before :-(
Here is the thing: I've attached a picture of one of my forms (on a very early stage). I want to save the inputs into a table1 containing all the coworkers. I want to write the value 'X' into the column selected in the drop-down menu. But only at the coworkers whose numbers are entered into the textboxes 1-6.
I have a simple data entry form...when the user enters in something and tabs to the next field, it automatically adds the data into that field. Is it possible to dissalow or turn this automatic update off? I ultimately want the user to complete the whole form, then click submit. At that point in time and only then will the data be updated into the table....(the submit button simply goes to a new record to add)
Or, same thing, when they tab down to the last field, and then tab to the first again (rolls over to new record)
I currently have a form with textboxes and 2 combo boxes. I have a submit button at the bottom of the page and would like this to take all the infomation from the form and add to a master table.
I was hoping to be able to create a pop up message to say "This item has been added to the database"