Form Text Alignment
Nov 24, 2004I have created a form and want to turn the text in a header to a vertical read. I have tried all I know even pasting from excel and it just stays horisontal? Any help would be great.
View RepliesI have created a form and want to turn the text in a header to a vertical read. I have tried all I know even pasting from excel and it just stays horisontal? Any help would be great.
View RepliesI have a form with many fields on it. For some reason some of the text in the form fields don't line up vertically with other text even though I have aligned them to the grid and to each other. I have Access 2013.
View 14 Replies View RelatedHi All
I dont have room on my form to read a text box from left to right so can it be rotated? so i read the text from bottom up as you can do in word text boxes or excel cells?
regards in advance
I have a series of Unbound control boxes in one row. some text extend to two lines and I want everything to be centered both horizontally and vertically.
Can't figure out how to vertically align the contents of the controlb boxes...
I have a multicolumn listbox on my form. It works, but the second column is an amount, and I would like that column to be right-adjusted. Is there a way to do that?
Thanks,
David
I have a report that was created on my computer. When this report is opened on other computers (2 that I've tried) the text alignment is way off. Originally I thought it had to do with printer margins dictating something but that is not the case as the margins remain identical on all computers. It's not a font issue because it's Arial which all computers have. The text is written inside a "label".
View 5 Replies View RelatedI'm creating a tabbed form in Access 2007, and in the first 3 tabs, when I dragged the field controls onto the form, they stretched to the width of the form and all stacked nicely underneath each other.
Now on the next tab they are coming out as much smaller. I don't want to stretch them to fit as I want them a uniform size and I just want to find how to get that setting back! I've been messing with the anchoring buttons to what seems like no avail!
G'Day again everyone,
I would like to justify everything so it is in the centre of the cell in the datasheet. Can this be done?
Also is there any way that you can wrap text in a text box?
Thanks a lot - Elliot
:confused:
is there any way you can align text and data within msgbox's, with vbtab etc.
i suppose its a matter of forcing several text strings to occupy a similar length of screen real estate.
can you achieve this in a msgbox?
While using list boxes i noticed that numeric fields were getting left aligned in the columns. Is there any way to get them right aligned ?
View 2 Replies View RelatedHow can change column color in list box and also how to make alignment left or right for cells data.
View 1 Replies View RelatedI am trying to make use of the OpenForm command to open a form to a record where a textbox matches the value of a text box on another form.
On Form1, I have a textbox called txtRtnRef, and it contains a reference number in a similar format to SWR-9
On Form2, I have a textbox called txtReOrderRef (control source ReOrderRef) which also contains a reference number in the same format (SWR-9)
I am trying to have a button next to the text box on Form1 that has an OnClick Event that opens Form2 to the record containing the same text reference number.I have tried, to no avail, a number of variations of the OpenForm command, the most recent being
Code:
DoCmd.OpenForm "Form2", , , "ReOrderRef = '" & Me.txtRtnRef & "'"
The form opens, but to a blank record?
My database has Main form and a Sub form. On main form i place one unbound text box named investigations. In subform of which datasheet there is a column named TestCode. I want unbound text box (Investigations) to display row values which selected in a column (TestCode) of subform.for example:Investigation field should display "CBC,HB,ALP".
View 5 Replies View RelatedI am using Access 2007 and 2010. I would like a text box (or label) on a report to autofil using fixed text from a label on a different (closed) form.
View 8 Replies View RelatedI have a Form Display Data in my Access Database, which is working really well. However, users was asking if there is a way we can make Font Color Could/would change if The text in A field or Any field in my display form contained the word "SAD or MAD". Is there code for such thing in display form?..
View 3 Replies View RelatedI am trying to search on EmployeeID field and populate corresponding data like EmployeeName, EmployeePay in other text boxes in the same box .
In my Unbound Form I have three unbound Text Boxes and one Command button:
txtEmpID
txtEmpName
txtEmpPay
cmdFind
In my table EMPLOYEE i have three fields
EmpID -- Autonumber
EmpName -- Text
EmpPay -- Text
I have a form where I want a textbox [txtMaxOrdLimit] to be visible only if another text box on the same form [PaNumber] contains the letter D in the string. This is the code I have on the forms On Current property but I'm missing something because textbox [txtMaxOrdLimit] doesn't show on the form at all.
If Me.PaNumber = "*D" Then
Me.txtMaxOrdLimit.Visible = True
Else
Me.txtMaxOrdLimit.Visible = False
End If
So i have made a query which filters the text you type in your text box on a form. This is working great, but then this morning I had some records that contain some blank fields. My query does not show those records even if they contain the same text that I would type in my search form.This is my expression in my query of one column:
Like [Forms]![searchform]![Qprojectomschrijving] & "*"
Dear All:
I have created a form with a checkbox. This checkbox returns a message when checked. Is it possible that when this check box is checked that specific text can appear on ANOTHER text box on the same form? The name of the desired textbox is called "NOTES."
Sorry about using checkbox repeatly!
Any ideas on how to get started?
Thanks in advance,
Dion
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website
Table:StaffContact
Staff Role
Name
speciality
email
phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]
But, it does not work .
I am very new at Microsoft Access. I have two forms, A and B, that are filled out by two different users. Form A gets filled out first than form B gets filled out. Each has a name box as well as a birthdate box and a few other similar text fields. However, each form also has a few distinctive fields. I was wondering how I could input the common information in Form A to Form B so the user of Form B does not have to spend time retyping the name and birthdates again. In other words, I want to synchronize the similar records between the two forms. I would like the values to appear in a table as well. I would greatly appreciate it if someone could help me with the visual basic code. Thank You.
View 1 Replies View RelatedI currently have two forms: frmE_SAFind and frmE_SAOrder
frmE_SAFind shows results from a query including fields [txtIDPO] and [dtmDate]
Example:
IDPO Date
btnOpnFrm 6543 2/1/05
btnOpnFrm 5681 1/1/05
frmE_SAOrder shows order details including [txtIDPO] and [dtmDate]
I have a open form command button set up on [frmE_SAFind] that opens [frmE_SAOrder]. Is it possible for me to modify its properties so that when the open form command button is clicked, the order details in [frmE_SAOrder] will represent the order that the user is selecting via the btnOpnFrm command?
Example: If I click btnOpnFrm for 6543, [frmE_SAOrder] will show me PO 6543 details.
Hopefully I made myself clear enough to understand. Thanks for your help!
There are two forms invoolved in thi
pfrm_AddClientPrimary
pfrm_AddClientDuplicateCheck
On a command button in pfrm_AddClientDuplicateCheck I have the following code.
Code:
Private Sub cmdAddNewClient_Click()
DoCmd.OpenForm "pfrm_AddClientPrimary"
DoCmd.Close acForm, "pfrm_AddClientDuplicateCheck"
End Sub
This works great
On the onOpen event of the pfrm_AddClientPrimary form I have this code
Code:
Private Sub Form_Open(Cancel As Integer)
Me.FirstName = Forms!pfrm_AddClientDuplicateCheck!txtFirstName
Me.LastName = Forms!pfrm_AddClientDuplicateCheck!txtLastName
Me.SocialInsureanceNumber = Forms!pfrm_AddClientDuplicateCheck!txtSOcialInsureanceNumber
Me.FirstName.SetFocus
End Sub
This fails on the first line with this error
Run-time error 2147352567 (80020009)
You can't assign a value to this object
I am aware of the incorrect spelling of Me.SocialInsureanceNumber this is the way it is in the db.
I have a button that opens a second form and filters that form based on a text box on the first form(which remains open). the problem is that it does not filter the second form unless the second form is already loaded for some reason.
For example if i click on the button it opens the form Unfiltered then i go back to the previous form without closing the first form, click the button again and it is then filtered .
I attached the screen shot of the macro for the button and there are no other events on the second form.
What I'm trying to accomplish is some sort of 'Order Confirmation' (filled with the info i have entered in my order form and sub_form fields) that i can copy and paste as a reply to their email-order.
I have taken 2 failed approaches so far:
1) I used a report to display the info
Private Sub Command103_Click()
DoCmd.OpenReport "Order Confirmed", acViewReport, , "OrderID = " & Me!OrderID
End Sub
This worked fine until the information was copied and pasted into outlook which upon doing so changed the column titles and layout
2) I used another form with a text box to fill with the data entered on the Order form
DoCmd.OpenForm "frm_Order_Confirmation"
[Forms]![frm_Order_Confirmation]![txtConfirmation_Text] = "Ref.:" & " " & [txtCustomer_Order_Reference_Number] & [vbNewLine] & "Item No.:" & " " & [cboProductID].[Column](1)
I got stuck here when trying to reference the data in the sub form... Also each order can have one or more colours and how to allow for this?
I have a text box in a form that is linked to a Table in another database. The Field name is "notes" and the Data Type is "Memo". When I fill in notes in the main form I only get 255 characters. The “memo” setting is supposed to give me thousands of characters. What’s up? Is it due to the linking between the two databases? :confused:
View 6 Replies View Related