Format Percent
Jun 11, 2007
Hey i have a percent field in a query which displays correctly in the datasheet view, but when make the report the percent is just a long row of numbers :confused:
anyone got any suggestions? would be greatly appreciated
View Replies
ADVERTISEMENT
Dec 8, 2005
Maybe someone knows the logic behind MS Access for the display of percents in the formating..... ie.... If you input 3 you get 300.00%. I really dont think ANY user would look at a form... with a field called...say "Commission percent" and expect an input of a 5 to return 500.00% Does this need to be corrected with coding?
View 2 Replies
View Related
Aug 30, 2005
I searched everywhere for a solution to my problem. I have to create a field and set its format property to Percent using code. I know how to create the field using code but how do i get to Format property? Is that possible?
Thanks in advance for your answers!
View 2 Replies
View Related
May 22, 2007
hi all,
i normally just go into design view in my query to change the format type, but some of my subqueries are quite large, so i'm getting 'the expression exceeds the 1,024 character limit for the query design grid.
i figured i could just multiply the subquery by 100, but the results are still calculated out to about ten decimal places.
so... how do i format a subquery directly in sql to be a percentage with two decimal places?
thank you,
mj
View 2 Replies
View Related
Feb 2, 2006
Hi,
How can format proper display for percentage values. What happens is I chose a field as percent, but if I put in 9 meaning 9 % I get 900% as the value is multiplied by 100, but if I put in 0.09 I get 0%.
I just want to put in day 9 and be saved as 9%.
thanks
dfuas
View 4 Replies
View Related
Jul 16, 2007
I have set a field in table to be a 'percent' However, try as I might am unable to type in 40 and get 40%
I seem to get either 4000% or 0. I have tried differing settings.
Has anybody else had this trouble and could offer some advice?
Thanks :confused:
View 5 Replies
View Related
Nov 8, 2005
Hi, in my query I am calculating a NET PRICE starting from the GROSS PRICE and the DISCOUNT % (Percent field). The Net Price shows incorrectly an amount which contains several decimals "invented" at the right end. For example, in this moment I have an item with Gross Price = 576,09 and Discount % = 10,00%. The Discount Amount shown by the query is 57,6090049743652 while the correct result should be 57,609. Therefore the Net Price is incorrect as well. Any thoughts about this ? Is there any known problem with the PERCENT fields ?
Thanks and regards. Alberto
View 4 Replies
View Related
Mar 13, 2006
Hello:
This is for the purchasing guy at my client's office. He has 9 vendors he wants to track their on time delivery performance. The data comes from the purchase order tables in his accounting software, to which I've linked via ODBC.
So far so good. I've created a query to pull only those 9 vendors from his total population, then ask for the date range to query by date for the date range (start and end date), and use an expression to calculate the difference between the date wanted and date received so he can tell if the delivery was on time or not. (ex: date wanted: 3/10/06 date received 3/13/06. 3 days difference = late delivery)
The twist is he wants another field so he can mark whether he considers the delivery late or not depending on extenuating circumstances he keeps locked up in his cranium, despite what the date difference results tell him. So, I created a combo box and he can select "Yes" or "No." If he selects YES, a value of 1 is written to the table in that field, if he selects NO, a value of 2 is written to the same field.
So, I need the query to group by vendor, count the total number of entries for that month by that vendor, count the number of "1"s and express that total as a percent of total deliveries.
To summarize, vendor A had 8 deliveries, 5 were on time, meaning he had a 62.5% delivery score. Vendor B had 10 deliveries, 7 on time, meaning a 70% delivery score.
Sorry for the long winded explanation, but perhaps someone can assist. All help appreciated.
View 2 Replies
View Related
May 7, 2013
I have a a table that stores various financial information such as sales receipt totals and variance totals (if actual cash in drawer did not match receipts, etc...) that I use to track cashier performance and identify possible problems. Part of this process includes a query that I pull reports against.
One such query, simplified to illustrate the concept, lists the dollar total that their receipts indicate they made, and the dollar amount that their actual drawer was off (either short or over what they should have taken in.) In this query I added fields that total Netsales (calculated from the first two fields) and another that calculates the percentage the variance is compared to their NetSales. The SQL behind the query is as follows:
Code:
SELECT tbl_OSRImport.Receipts, tbl_OSRImport.OverShort, [Receipts]-[OverShort] AS NetSales, [OverShort]/[NetSales] AS VarPerc
FROM tbl_OSRImport
WHERE (((tbl_OSRImport.OverShort)<>0) AND (([Receipts]-[OverShort])<>0));
This query works just fine. The calculated fields correctly display their results. The issue presents itself when I try to build a method for a user to run a report to see all the cashiers whose Varience Percentage (VarPerc) is equal to or within a range they specify. This allows the user to see all the cashiers who, for example, are more that 5% over or short. I have tried a number of criteria expressions in the query, with no success. I have gotten everything from a prompt asking me for paremeters to an error stating "Stack Overflow." I believe the problem has something to do with the fact that the numerical value that is calculated is a long string of numbers ending in letters and characters, which the Query displays as a neat and tidy Percentage. Below is an example of the data that I hope will explain this:
In the Query, the expression is: VarPerc: [OverShort]/[NetSales]
When the Query runs, the full numerical result is: -4.27103159497526E-02
Which visually is output as: -4.72%
Mathmatically (on a calculator using the same values) the equation is as follows:
-11.22 / 262.70 = -0.04271032
I think my attempts are failing becaue the query is trying to compare the user's input of (for example) 5, .5, .05, etc.... against the numerical value in the query result that includes the E-02 (above example.) So, rightfully it comes back with no results or an error.
View 5 Replies
View Related
Jun 19, 2014
How can I change a number column in a three digit percent one?Tried the following, however it just deletes the content of the column:
Code:
Public Sub TEST()
Dim a11 As Double
Dim year As Integer
[code]...
View 6 Replies
View Related
Sep 17, 2014
I'm enrolling medical centers in a new multi-center database. There are a number of steps that must be completed before the center is enrolled in the project. I have a form that serves as a checklist. I want the textbox at the bottom of the form to display the percentage of steps completed. I guess you would have to count the number of fields on the form that are filled in, but I don't know how to do it.
View 1 Replies
View Related
Feb 17, 2014
I wanted to assign the field "Number of magazine" with special format based on date/time format but showing only year and month in the format: "yyyy-mm".
So in property of this field in format I put yyyy-mm and in input mask I type 0000-00;;-
I also created the form based on the table containing above field and I defined format and input mask for corresponding formant in the same way like at the table.
But if I try to type date for example 2014-01 in text box of the form it comes up with the full date 2014-01-01. Why does it do like this? What do I do incorrectly?
View 2 Replies
View Related
Jul 30, 2013
I have a list of dates in the mm/dd/yyyy format and I am looking to get it into the fiscal format of yyyyww. I am able to do this with the datepart and format functions, but I need to make it so that the fiscal month begins in January but the first week starts if there are three or more days in the week. For instance if Jan 1st is a Friday then this stands as the first fiscal week, if it is a Saturday then it does not count as the first week.
datepart and format functions have the Use the first week in the year that has at least 4 days for the firstweekofyear option but I need it where it has at least three to make it work.
View 2 Replies
View Related
Jul 7, 2015
I want to format the text using format function. how i format the word apple to "apple" (With Quatation mark).
str = Format(Me.word, xxxx)
View 3 Replies
View Related
May 4, 2012
I am exporting data from access 2007 to Excel 2007 using VBA code. I have a whole number, which I want displayed as whole number. But after the export, the number is using the 1000's seperator in Excel. So for example if my original number in access table is 12000, it is showing up as 12,000 in the excel file.It has something to do with the NumberFormat property. I have tried doing this but doesn't work.
objSheet.Range("A1:A7").NumberFormat = "General"
View 2 Replies
View Related
Mar 2, 2012
We're using Access 2010 on Windows 7.We have a large database design where we send reports as e-mail attachments. We need to change the way the file is automatically created when sent. I goes to snapshot form every time we attach it to an e-mail. How can we get rid of the snapshot .snp file format? How can we change it to pdf or accbd?
View 3 Replies
View Related
Apr 18, 2006
I'm trying to use Conditional Formatting Options on a Text box called "Date". I'd like that this box become Red if its value is between value1 from Text box "Start Date" and value2 from Text box "End Date" or Green otherwise (in this way the color change dynamically every time I change the values of Text Boxes "Start Date " and "End Date"). How can I do that? What I need to type in the Conditional Formatting Windows?
Is there any other way to do that without using Conditional Formatting?
View 1 Replies
View Related
Jun 21, 2005
I really forgot how to do this, how can I change the format of my ID, I have set it up as autonumber and I need to view as
For Example
ACA001
ACA002 etc
The way I have it now is just simple plain numbers 1,2,3,4,5..etc
Thanks.
View 5 Replies
View Related
Jul 22, 2005
I have tried various suggestions posted, but still can't seem to get the result I need. I have a field I have to import to a database, SS (Social Security Number). In the database I am exporting from, it is text and does not use leading zeros. In the database I am importing into, it must have leading zeros and be in the format 123-45-6789 as a text field. I have tried input masks, formats, etc but still can't seem to make it work. I do not want to add zeros to fields that have the beginning three digits, or add too many zeros to the fields having two of the three digits. Any help would be appreciated.
View 4 Replies
View Related
Dec 11, 2007
I have a query where I extract today's date and time using now() but need the extracted file to display the date/time as YYYY-MM-DD HH:MM:SS
View 4 Replies
View Related
Jan 21, 2008
I am having difficulties converting a chart/form to from 97 to 2003.
I keep getting "Undifiend function 'Format' in expression."
The query behind the form is
SELECT (Format([Dated],"MMM 'YY")),Count(*) AS [Count] FROM [apps set up] GROUP BY (Year([Dated])*12 + Month([Dated])-1),(Format([Dated],"MMM 'YY"));
Any ideas why?
View 1 Replies
View Related
Sep 26, 2005
After I send the file using RTF format, I open the file, the border line cannot be transfer there. But, the report can show borderline. After transferring, the borderline cannot show.
How can I transfer borderline and the image?
View 1 Replies
View Related
Aug 3, 2005
Hi,
I've created a database to keep track of schedules, and have created a report that displays like a calendar.
Similar to Pat's example here
http://www.google.com/url?sa=D&q=http://www.access-programmers.co.uk/forums/showpost.php%3Fp%3D288791%26postcount%3D17
What I would like to do now, is create a DAP that will display in a similar format. But because the report uses subreports, it doesn't just tranfer over.
Does anyone have any ideas on how to create a simlar calendar format, within a DAP?
We want to use this on our intranet, so everyone can see each others schedules, and this is the only thing left I have to do. I just can't seem to get anything to work.
thanks
Chris.
View 2 Replies
View Related
Nov 21, 2005
I have a problem with one of my combo box. The format setting of the combo box doesn't change anything to the way I see my data. The row source is based on a query of which the 'data sheet view' shows my field with three decimal number. Whatever setting I change on my combo boxe parameter, the data in the list are always shown with 2 decimals. What can i do to view my data with 3 decimals?
View 13 Replies
View Related
Feb 24, 2006
I have this code for an excel file in vba, strDate = Format(Date, "mm-dd-yy") & " " & " at " & Format(Time, "h-mm-ss").
I'm trying to put colons ":" instead of the dashs "-" for the time but I get a debug error, is there any way I can make it work, or am i stuck with dashes. Thanks.
View 4 Replies
View Related
Apr 2, 2006
The date format from one of my access tables is as follows:
11051977
9101978
and I need to amend to following formats within my select query:
11/05/1977
09/10/1978
I have tried using formula:
Date of Birth: DateValue(Mid([DOB],7,2) & "/" & Mid([DOB],5,2) & "/" & Mid([DOB],1,4))
that results in an #Error messages
Can anyone help?
Thanks
View 8 Replies
View Related