I have not used access since Office 97 so, I see many changes. A while back I used Access to create some minor tracking databases. Now, with 2010 I'd like to modify the database that I am currently using. I have a main form that tracks daily trips or tasking(s). Within the form are two sub forms that track:
1. People assigned to the trip through a combo box; and
2. Itinerary for this trip.
I have been asked to add a Trip justification(s) through a combo box which will have several selections avail that can be chosen and would apply to each trip. These can be added to by double clicking the justification (figured that one out). What I would like the sub form to do for each new trip that is entered is to display only these values as a single selection rather than 12 times (example) if there are 12 trips that have the reason justification as part of the trip/tasking.
I just can't seem to make this work. The personnel one and itinerary one work just fine (previously existing). I just can't seem to get the new one to work. I have checked that the new table is connected through the relationships. In the exact same manner. The new form has the ID (Key) OPID (to link each trip separately) and justification text field.
Why Access 2010 will filter some dates and not others?? When I try to filter 12/02/2014 it will not work and I have to use 12/feb/2014 but if I use 13/02/2014 it is fine...
I am trying to create a database to manage IT assets, most of the structure is done, I'm now trying to get the details done.
The issue I am currently trying to tackle is to get a control button on one form to create a new record in the sub form that sits in the main form via another pop-up form.
So I have :
>PeripheralsViewForm - that has 4 control buttons (Edit Quantity, Edit Description,Add an Item and Exit)
>> PeripheralsSubForm - (Datasheet) which is referenced to PeripheralsQuery
The Edit Quantity and Edit Description open a separate form which allows the user to update only the quantity or description respectively (I have done it this way rather than allowing edits in the data sheet as I feel that it is too easy to hit a key incorrectly and overwrite data in the datasheet view) Both of these functions work perfectly (to my amazement) - I am using the id field in the subform to link to the pop-up form which then has unbound text input boxes, which I then write back to the subform.
e.g from edit button on click event: DoCmd.OpenForm "perquantform", , , " ID=" & Form.PeripheralsSubForm!ID and then from the pop-up form "perquantform" on the "Exit & Save" button I have :
This allows the user to select the record in the datasheet form and then click either the change quantity or description button.Also also the other reason I did it this way was because I just couldn't get the subform to requery when I had the two edit popups linked to the table or query.
The problem now is that when I click on the "Add an Item" button, it overwrites whatever record is currently selected !
The code I have is this:
From the "Add an Item" button on click action: DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec DoCmd.OpenForm "addperform"
And from the form "addperform" - "Save & Exit" button on click action:
the line "DoCmd.GoToRecord , Forms!peripheralsViewForm!PeripheralsSubForm.Form! , acNewRec" is what I have added to try to solve the overwrite issue, but when I run this it comes up with the error :
"runtime error 2498 - An expression you entered is the wrong data type for one of the arguments"
I have put this line in the "addperform" exit action and it comes up with the same sort of error.
The main form has fields for Record ID, Position, and Revision. The subform has fields for ID, Position, and Revision. There is also a field for "task". I have over 15 positions and 495 tasks. Each position has a set number (around 15 or so) tasks associated with that position.
I have the Position in the main form and the subform linked so when I select a position on the main form, the subform loads the same position. The question field (drop down) is "fed" from a query which contains all positions and all tasks. What I want the subform to do is when I select a position the drop down ONLY displays the tasks associated with that position.
I tried using an event procedure "On Click" and "After Update" to no avail. The embedded macro was:
Apply Filter Where condition= [tbl_Detail Cost Information]![Position]=[qry_attempt 1]![Position].
I also tried the reverse Where condition =[qry_attempt 1]![Position]=[tbl_Detail Cost Information]![Position]
The result is a fully loaded (all tasks) drop down.
I am using Access 2010. I have a subform(continuous form) that I display as a datasheet and allow filtering. I display the record count by using Me.Recordset.RecordCount in the subform's form_current event. This value updates properly based on the column filtering except when the filtering displays 0 records.
When there are 0 records, the form_current event does not fire and I cannot figure out how to trap when this occurs so that I can display '0 records found'. How I can tell when the column filtering causes 0 records to display in the datasheet? Is there an event that fires when the user filters using the column headings arrow?
I have a tab control at the bottom of my main form, and some of the tab pages contain subforms. On one of the subforms I have created a filter to divide the content into "complete" and "incomplete." I have also added a toggle button option group to the subform to toggle the filter (one button for "complete" and one for "incomplete"). I'm using a macro to apply the filter, but it isn't working. The filter does work properly if I use the "Toggle Filter" button on the Ribbon, but I want to create something a little more user friendly.
If [tgl_Complete_Incomplete]=-1 Then ApplyFilter Filter Name Where Condition =(([tbl_Action_Items].[Completed])=True) Control Name [Forms]![Search_by_name]![sfctlActionItems].[Form]![tgl_Complete_Incomplete] Else RunMenuCommand Command RemoveFilterSort End If
I get the error message "The 'ApplyFilter' action requires a valid control name that corresponds to a subform or subreport."
If I remove the content of the Control Name field and open the subform independently (i.e. not as a subform), everything works fine.
I am trying to filter a subform on a tab control based on an input on a second form.
Mainform: frm Index Page 2 Tab Control on Mainform: tabctrlMain Subform: Customer Details Tab Name: tabCustomerDetails
The second form is basically a separate Search Form where users can look for a customer ID and returns the ID back to Customer Details form.So far I have managed to redirect focus to the correct tab on the tab control using the following code:
DoCmd.OpenForm "frm Index Page 2" With Forms("frm Index Page 2") !tabctrlMain.Value = !tabCustomerDetails.PageIndex End With
However, I am stuck with the filtering part. Everything was working fine before I began putting the forms together into one big tab control (I tried using Navigation Pane but there were too many referencing problems so I gave up on that one).
I have faced with a problem while i was filtering my main form.....my problem is when i filter the main or parent form the related sub-form also gets filtered how to manage the main form so that when i filter it the sub-form should not be filtered so that i can get the related record to my filtered one in the sub-form... as for the time being when i filter the main form the related record in the sub-form is not shown and when i press unfiltered on the sub-form its data gets appeared....
I have a pivotchart subform who's Filter Property I've set to:
Code: [EEIC_ID] In ([Forms]![MainDataControl].[EEICBuffer],0) And IIf([Forms]![MainDataControl].[TypeIDBuffer]="",[AG_TYPE_ID] Like "*",[AG_TYPE_ID] In ([Forms]![MainDataControl].[TypeIDBuffer],"")) And IIf([Forms]![MainDataControl].[AgencyBuffer]="",[AGENCY_ID] Like "*",[AGENCY_ID] In ([Forms]![MainDataControl].[AgencyBuffer],"")) And IIf([Forms]![MainDataControl].[FacilityBuffer]="",[FACILITY_ID] Like "*",[FACILITY_ID] In ([Forms]![MainDataControl].[FacilityBuffer],""))
The issue is that none of the parameters are recognizing the textbox controls even though the references appear to be correct. Per access.mvps.org/ access/forms/frm0031.htm, I've attempted several versions of the syntax.
I believe that I've done this successfully in several other forms, though none have been been via a pivotchart. What's more, this exact same filter string worked when the pivotchart was its own popup and the referenced form was a separate window. Once I embedded it (being the pivotchart) as a subform, however, I began to be presented with the "Enter Parameter Value" dialog, even though the control's address had not changed. Note: the form with the embedded pivotchart is separate from the control's parent form.
In essence: the filter property of a pivotchart subform has a parameter that references a control on a seperate popup form, and every one of the syntactual statements I've tried returns an "Enter Parameter Value" dialog (where they did not when the pivotchart was not a subform). I've also attempted to isolate this issue by putting the text box controls on the parent form (rather than the separate popup form) and referencing them via the pivotchart subform, but this provided no resolution (the same thing happened).
I've been using the following code successfully in Access 2003 & now I need to migrate to Access 2010. The purpose of the code is to use the items that the user selects in the list box to build the criteria of a query. Access 2010 keeps giving me a syntax error when I try to run the query & I don't know why:
My code is:
On Error GoTo Err_Command151_Click
' Declare variables Dim db As DAO.Database Dim qdf As DAO.QueryDef Dim varItem As Variant Dim strCriteria As String Dim strSQL As String
[Code] .....
The syntax error I get in Access 2010 is:
Syntax Error in query expression 'SELECT * FROM qryContractListSummarybyDateContract3TYPEBREAK WHERE qryContractListSummarybyDateContract3TYPEBREAK.Rep ortableName IN('Adbri Masonry NSW');'
Where can I find the Hex or RGB value for the blue colour that Access 2010 uses by default for buttons on forms? I need to change some buttons to yellow (I know the code for that) but later change them back to the previous shade of blue, which is shown in the Properties pane "Accent 1, Lighter 40%".
By clicking in the standard colors area at the bottom of the colour chooser I can find a very similar blue #D6DFEC but it doesn't look quite right. And the "accent" colour does not give me a Hex value.Is that "usual" blue even one colour? How can I reset a button to that style having changed it?
I have a MS Access 2010 application when the User opens form CONTACTS Form
◦User finds single record to be used CONTACTID is identifier to be used for selection ◦User clicks button to open form frm_MAIL_MERGE ◦Frm_MAIL_MERGE has a drop down combo box that reads the folder location where the application resides and displays all .DOTM files (that is all template files) and one more combo box which contains the CONTACTID. ◦User selects single .dotm file for merge ◦Frm_MAIL_MERGE has either drop down to select CONTACTID or UNBOUND data field for user to type in CONTACTID number ◦User enters CONTACTID to be used for the mail merge ◦User selects SUBMIT ◦Application merges selected .dotm file with the information in table CONTACTS for the selected CONTACTID ◦Merged document is saved on the user Desktop as xxx.docx
Is it possible to have a value in an excel 2010 cell be used to update an access 2010 db?
For example, if in a spreadsheet "test" cell A2=3 then in a db "test" a column "value" is 3. However, if the value in the spreadsheet changes so does the db.
I wish to work in Access 2010 with a subset of my Outlook 2010 contacts (all desktop- no network barriers), so I am exploring the Desktop Contacts DB found in Microsoft's templates. It passes contact data back and forth using the standard macros, but I wish to add more fields from Outlook. It seems I need to find the code associated with the macro. I believe I can solve the problem using a Linked table, but am wondering if there is another solution?
Calendar synchronization is another issue. Linking gets me to the Archive Calendars, but not the Current one in Outlook which is what I want.
I am using Access 2010 and have a form based upon a query (qry_student). In tihs query I have a field called Details that contains the student's address; a composite of the relevant fields from the table tbl_student. I have used chr(13) & chr(10) to create linebreaks wihtin the query field.
I have a textbox where the Control Source is set to this field of the query.
The textbox does not display the data correct and I believe this is because it is in Plain Text mode.
When I try to change it to Rich Text I get an error message.
If I remove the control source then I can change it to Rich Text but then this negates the very purpose of the textbox.
We recently updated to 64 bit Office 2010, however there is a form created by an intern who has since moved on, anyways the form was created in 32 bit. SO hence we cannot open it. We get any error message that it was created in 32 bit and cannot be open in 64 bit Office. I have tried to resaved the form on a different pc with 64 bit office. But it will not allow me to save, possibly because the form is locked down from changes. The file extension is .accde.
I have a Main (Home) form that has a sub navigation form (frmNavigationSubform).Need to access 3 forms. Forms 1,2 and 3. Also, have 1 options form.
Subform has 2 Navigation buttons. NavigationButton2 and NavigationButton3.
NavigationButton 2 Navigation Target Name = 1 (frm #1).
NavigationButton 3 has no Navigation Target Name. This is passed on when user picks Option1 or Option2 form options pop screen.
Now I can pass the name to the Navigation Buttons2 but the subform does not show it. I have to click on the Navigation Buttons2 again for it to show. What I want is when the user makes the choice in the options screen the name is passed and form 2 or 3 should load/show.
disable the data picker for every field on every form in my application - without doing it the long winded way of manually turning it off for every field?
I am very new to Access (I started two weeks ago). One problem I am having is I have a multiselect box on a form in Access 2010 and I want to base the value of a text box on the user's selection. However I would like the textbox to just be based on one of the choices and to allow the user to select any other of the choices along side this selection. How would I input this into the code?The line of code I am interested in looks like:
If Me.Reasons_For_Choosing_Physics.Column(2) = "No other ideas" Then..Could I add something like "No other ideas" + "(*)" to allow other selections alongside "No other ideas"?
I'm working with an old database and I am getting this error. I have have access 2010. I starting to receive this error after I unlinked one of the tables.
Private Sub Command9_Click() On Error GoTo Err_Command9_Click
Dim stDocName As String Dim stLinkCriteria As String
I have a unique "CustomerID" that is an auto number (this is how I link tables, forms, etc.), and "CustomerNumber", "CustomerName", "CustomerSubNumber" that could be null and could have duplicate values.
The first form I have is a Contact Info form where users will enter the contact information such as customer numbers, names, addresses, phone numbers, etc. This then links to an order form. My order form has a place to carry over the "CustomerNumber", "CustomerName", "CustomerSubNumber" values from the ContactInfo table. I would like these fields to automatically populate based on the CustomerID unique number as well as only show the information for that customer ID (including listing out any previous orders).
I have a form design where to enter a new "system" (what we call a new group of members) you have to specify the representative (the member that will represent the system).
If the system is new AND the representative is new, then both need to be entered. Typically this will be done through the "New System" form that has a combo box for you to choose the representative (but the representative won't be there!). If the representative is new as well, then the user clicks "Add New Rep" which is located next to the combo box.
This is where things get tricky, I'd like to use only 1 form to load a new rep. My idea was to use an openarg on the docmd.openform method that specifies what the control should be.
That is the code that is called when the user click "Add new rep" and in the on load event I have this code:
Code: 'Use this version if the ID is text Dim x As Variant Dim strControl As String Dim strID As Long 'If parameters exist, use them
[Code] ....
My goal was to pass the value to the combobox and turn it off, that way they can't change anything about it. This was nice because if the openargs is null (there were none passed) then the combo box would be enabled and the user could select the school that way.
But this doesn't work, for some reason, the combo box has NOTHING done to it (I have the control name correct).
Is this due to the way comboboxes work? Or am I missing something?
I should point out that the on-load event was not my idea, I found that online but makes perfect sense. I was trying something similar but was trying to use global variables because I wasn't aware that OpenArgs was a valid control!
