Forms :: Access Website And Type In Search Bar

Feb 3, 2014

I am trying to get a button on my form to open two reports, and also go to a website. Once at the website I want it to type in a search bar based off of the criteria of the two reports. I currently have it able to open both reports correctly, and I can get the website to open, but I am not able to find a way to get access to type anything once on the website.

I am opening the website using:

Application.FollowHyperlink _
"enterwebsite"

View Replies


ADVERTISEMENT

Forms :: Search Form Creating Error When Type First Letter As Lower Case I

Oct 6, 2014

When I type the first letter I into the search text area I get the following error

Run-time error '2110'
Microsoft Access can't move the focus to the control SearchResults

Most of the code is below

QRY-SearchAll
SELECT Clients.ClientId, Clients.ClientFileNumber, Clients.ClientShortFileNo, Clients.Salutation, Clients.FirstName, Clients.LastName, [Group Branches].BranchCode, Clients.Phone, Clients.Mobile, Clients.Fax, Clients.BpayRef, Clients.TradingAs, Clients.EntityType, Clients.ABN, Clients.ACN, Clients.Address1, Clients.Address2, Clients.Town, Clients.State, Clients.PostCode, Clients.Country, Clients.Email, Clients.ClientGroup, Clients.DateCreated, Clients.Notes, Clients.LastModified, Clients.UserCode, Clients.BdmCode, Clients.CollLongNo, Clients.CollShortNo,

[Code] ....

View 1 Replies View Related

Forms :: Make A Button To Search Range Of Columns In Data Table With Data Type Yes / No

Apr 15, 2013

what I want to do is make a button to search range of columns in data table with data type Yes/no and display the results if the value is yes

View 9 Replies View Related

Publish Products From Access On Website

May 28, 2006

I would love to publish my product catalog from my access database on a website. it should be a browsable catalog with search field on article number range, product group, product type and should be able to display product pictures.Within my access database i have a link to the product picture stored by filename. I'm looking for an easy solution to do this, i'm using mysql as database on my hosting provider.I can do the export to mysql myself (interfacing between access and mysql) but am looking for some hot software to display the catalog easily without programming the front website myself. I already have oscommerce installed but don't want a webshop and don't know how to disactivate all the features within oscommerce to only retain the article browsing.Thanks if you have a hint

View 3 Replies View Related

Link To Website (MS Access Database)

Sep 16, 2005

Hi,
How I can link to website MS Access database?
File->Link Tables doesn't understand http or ftp.
Provider doesn't support MS Access.
Thanks for your advice.

View 2 Replies View Related

Update MS Access Datbase From An Website

Oct 2, 2007

Hi,

im new this forum and this is my first post, ive tried searching but if anyone could direct me in the right direction that will be great,

bassically i have created a basic Ms access databse for a hotel reservation system, with queries, reports etc. The database works fine.

I need to create an website which will connect to the database so that i can enter,view, query records from the website.

I have very little or no programming knowledge so whats the best solution. I was going to make the website in either dreamveaver or frontpage but ive read that these static websites cant connect to an database.

im sorry if this question problably has been asked a million times before but i need some advise as im a beginer.

any help much appreciated.

Thanks

View 13 Replies View Related

General :: Website To Get Data From MS Access Database?

Jan 10, 2013

Is it possible for a website to pull data from an Access database?

We have all our department's policies in a MS Access database on our server. Some of these policies need to be made available to the public on our website. I'm wondering if there's a way for the website to pull directly from the database rather than having to manually upload the policies to the site every time they change (annually, semi-annually).

View 1 Replies View Related

How To Open A Website URL In Pop Up Mode From A Form In Access

May 4, 2015

I am writing a program that allows users to enter customer info and I want to be able to pop up a window that will search for Postal (Zip) codes using the Postal Service URL. (I would like to position the popup so that the contents of the Address and Postal Code fields are still visible on the form). I would also like to know if there is a way to copy the contents of the Address Field in my program to the Windows Clipboard, using VBA code, so that I can paste it into the Postal Code Finder without highlighting the field contents and pressing Ctrl-C.

View 2 Replies View Related

Modules & VBA :: Using Access To Check Whether A Specific File Exists On A Website?

Aug 19, 2013

Actually what I am looking to do is have an Access application check some Web site for the presence of a number. This number could be the Serial number of the application and if this number exists to maybe show a message in the aplication or even terminate the application.

A quick and dirty way is for User Serial number 254, to put on a specific page of a Web site say arbitrary file 254.jpg (invisible on the Web site). The application would check for the existence of this file and if it is there, it could take some action. Everything would have to be done in stealth mode.

The following code can tell me if a specific URL exists, in this case [URL]

Code:

Private Sub cmdArbitray_Click()
Dim blnDum As Boolean
blnDum = blnCheckURL("http://www.VisualDentist.com")
' If blnDum = True then it exists
End Sub
Public Function blnCheckURL(ByVal strURL As String) As Boolean
Const FLAG_ICC_FORCE_CONNECTION As Long = &H1
blnCheckURL = (InternetCheckConnection(strURL, FLAG_ICC_FORCE_CONNECTION, 0&) <> 0&)
End Function

1) How can I check for file 254.jpg?

View 1 Replies View Related

General :: Connecting Access Database To Website To Import Data Automatically

Jun 30, 2015

I just created a database and need to connect it to the data source. The data comes from a http website (intranet from work). When I open the link using firefox, I can view the website with the data in it, but when I open it from Internet Explorer, I get a save as pop-up message to save a csv file which contains all the data. The extension of the http website ends with csv. So it is something like http (slash slash...) Intranetname/referral_dbase.csv

Currently, I am opening the file using firefox, copying all the data manually, and pasting it in a text file using notepad. After that, I import the file into access. The delimiter of the data is this symbol: |

I am trying to find a way to link my database to the website where the data is located so that I can skip the manual process of opening the website and copying the data and saving it into a text file and then importing that file into access. I was thinking to have like a form in access with a bottom that will automatically import that data from this link and paste it into a table in access using the delimiter symbol mentioned above.

Is this too complicated? Is it even possible in access 2010?

View 1 Replies View Related

Boolean Type Search

Oct 31, 2007

I need to create a user interface that will allow a boolean type search of a field. This would mean item1 AND item2 AND NOT item 3, item1 or item2, item 1 NOT item2, etc.

I've set up a combo box setup with the following script, but I can't figure out how to adjust it to allow the multiples.

Please advise if I should adjust this or try a differenmt interface format for my users.

__________________________________________________ ________

Option Compare Database 'Use database order for string comparisons
Option Explicit

Private Function AfterCombo(WhichLine As Integer)
Dim CBox As Control, TBox As Control, AndBox As Control, TBoxA As Control
Set CBox = Me("Combo" & WhichLine)
Set TBox = Me("Value" & WhichLine)
Set AndBox = Me("And" & WhichLine)
Set TBoxA = Me("Value" & WhichLine & "A")
TBox = Null
TBoxA = Null
Select Case CBox
Case "All", "Blank", "Not Blank"
TBox.Visible = False
AndBox.Visible = False
TBoxA.Visible = False
Case "Like", "Equal", "Less Than", "Greater Than", "Not Like", "Not Equal", "Not Less Than", "Not Greater Than", "In List", "Not In List"
TBox.Visible = True
AndBox.Visible = False
TBoxA.Visible = False
Case "Between", "Not Between"
TBox.Visible = True
AndBox.Visible = True
TBoxA.Visible = True
End Select
End Function

Private Sub Cancel_Click()
DoCmd.Close
End Sub

Private Function FormatList(ByVal List As String, FieldType As Integer)
Dim NewList As String, CommaPos As Integer, Word As String
NewList = ""
Do While Len(List) > 0
CommaPos = InStr(List, ",")
If CommaPos = 0 Then
Word = Trim(List)
List = ""
Else
Word = Trim(Left(List, CommaPos - 1))
List = Trim(Mid(List, CommaPos + 1))
End If
If Word > "" Then
Select Case FieldType
Case DB_TEXT, DB_MEMO
If InStr(Word, """") > 0 Then
MsgBox "Don't type double-quotes in the list"
End
End If
Word = """" & Word & """"
Case DB_DATE
If InStr(Word, "#") > 0 Then
MsgBox "Don't type '#' in your dates"
End
End If
If Not IsDate(Word) Then
MsgBox "Your list contains non-date characters"
End
End If
Word = "#" & Word & "#"
Case Else
If Not IsNumeric(Word) Then
MsgBox "Your list contains non-numeric characters"
End
End If
End Select
NewList = NewList & "," & Word
End If
Loop
NewList = Mid(NewList, 2)
If NewList = "" Then
MsgBox "Your list needs a valid value"
End
End If
FormatList = NewList
End Function

Private Function MakeNull(C As Control)
If Len(Trim(C)) < 1 Then C = Null
End Function

Private Function MakeSQL(WhichLine As Integer, FieldName As String, FieldType As Integer) As Variant
Dim CBox As Variant, TBox As Variant, TBoxA As Variant
Dim Condition As Variant, Delim1 As String, Delim2 As String
CBox = Me("Combo" & WhichLine)
TBox = Me("Value" & WhichLine)
TBoxA = Me("Value" & WhichLine & "A")
Select Case CBox
Case "Like", "Equal", "Less Than", "Greater Than", "In", "Not Like", "Not Equal", "Not Less Than", "Not Greater Than", "Not In"
If IsNull(TBox) Then
MsgBox "You have left a parameter blank for field [" & FieldName & "]"
End
End If
Case "Between", "Not Between"
If IsNull(TBox) Or IsNull(TBoxA) Then
MsgBox "You have left a parameter blank for field [" & FieldName & "]"
End
End If
End Select
Select Case FieldType
Case DB_TEXT, DB_MEMO
Delim1 = """"
Delim2 = """"
If Not IsNull(TBox) Then TBox = QFix(TBox)
If Not IsNull(TBoxA) Then TBoxA = QFix(TBoxA)
Case DB_DATE
Delim1 = "#"
Delim2 = "#"
Case Else
Delim1 = ""
Delim2 = ""
End Select
Select Case CBox
Case "All"
Condition = Null
Case "Blank"
Condition = " Is Null"
Case "Not Blank"
Condition = " Is Not Null"
Case "Like"
Condition = " Like """ & TBox & """"
Case "Equal"
Condition = "=" & Delim1 & TBox & Delim2
Case "Less Than"
Condition = "<" & Delim1 & TBox & Delim2
Case "Greater Than"
Condition = ">" & Delim1 & TBox & Delim2
Case "Not Like"
Condition = " Not Like """ & TBox & """"
Case "Not Equal"
Condition = "<>" & Delim1 & TBox & Delim2
Case "Not Less Than"
Condition = ">=" & Delim1 & TBox & Delim2
Case "Not Greater Than"
Condition = "<=" & Delim1 & TBox & Delim2
Case "In List"
Condition = " In(" & FormatList(TBox, FieldType) & ")"
Case "Not In List"
Condition = " Not In(" & FormatList(TBox, FieldType) & ")"
Case "Between"
Condition = " Between " & Delim1 & TBox & Delim2 & " And " & Delim1 & TBoxA & Delim2
Case "Not Between"
Condition = " Not Between " & Delim1 & TBox & Delim2 & " And " & Delim1 & TBoxA & Delim2
End Select
MakeSQL = " And [" + FieldName + "]" + Condition
End Function

Private Sub OK_Click()
Dim Where As String
Const ObType = "Form"
Where = Where & MakeSQL(1, "Lyrics", 10)
Where = Where & MakeSQL(2, "TrackTitle", 10)

On Error GoTo OKCApplyError
If Where <> "" Then
Where = Mid(Where, 6)
DoCmd.OpenForm "MasterFormQuery", , , Where
Else
DoCmd.OpenForm "MasterFormQuery"
End If

OKCExit:
Exit Sub

OKCApplyError:
MsgBox "Error " & Err & " opening " & ObType & Chr$(13) & Chr$(10) & Error
Resume OKCExit

End Sub

Private Function QFix(ByVal X)
Dim P As Integer
If IsNull(X) Then
QFix = Null
Exit Function
End If
P = InStr(X, """")
Do While P > 0
X = Left$(X, P) & """" & Mid$(X, P + 1)
P = InStr(P + 2, X, """")
Loop
QFix = X
End Function

Private Sub exitselectform_Click()
On Error GoTo Err_exitselectform_Click


DoCmd.Close

Exit_exitselectform_Click:
Exit Sub

Err_exitselectform_Click:
MsgBox Err.Description
Resume Exit_exitselectform_Click

End Sub

View 9 Replies View Related

Search Listbox As You Type In Textbox

May 26, 2005

hello guys! i hope you can help me with this.
can somebody show me how to do this in access?

here is the link of the VB version.
http://www.codeguru.com/vb/controls/vb_listbox/article.php/c2773/

my data in the listbox will be coming from a table with 3 columns, but ill be using only the 1st column (unique) during the search.

some people suggest me to use combobox, but for some reason i have to use a textbox and a listbox.

thanks in advance for the help!

View 2 Replies View Related

Modules & VBA :: Continuous Form Combobox Search As You Type

Jul 28, 2014

What i want is to have a combo box on a continuous form that as you type it filters the Query it is based on using a Like *. and drops downs so the user can see the updated list after each key press? Is this possible?

View 4 Replies View Related

General :: Combo Box Does Not Expand And Search As User Type In

Jun 30, 2015

MS ACCESS 2010
AutoExpand Property Set to Yes

I have a bound combo box that has a query as a row source, The query has 3 fields called from tblMasterItems, The ItemID , ItemDesc and ItemSupplier(related to the PK of tblSupplier).

Column Count = 3
Column Width = 0";1";0"

If I do not put a criteria under ItemSupplier, the combo box behaves just fine. The problem happens when I set the criteria under ItemSupplier, the criteria being the supplier ID, the combo box no longer expands and searches as you type, but the items in the combo box have been filtered and are there.

Summary:

When the row source qry ItemSupplier Field does not have a criteria, cbo works just fine.
When the row source qry ItemSupplier has a criteria, cbo no longer expands and searches as you type, but has the filtered data showing if you hit the expand button (that arrow pointing down in the cbo)

View 6 Replies View Related

Forms :: Search Within Access Form

Sep 12, 2014

I am trying to create a search box in Access 2010 inside a form. I have managed to create a search using the 'Surname', but what I am unable to do is to factored in multiple records with the same surname.

Currently, the search field sits within the Form Header bar. I enter the surname or part of surname and click the command button which searches. Using MoveFirst and FindFirst, it jumps the form for the first record that matches (or partially matches).

However, there will be occasions where there will be more than one record that matches. What I want to do is to be able to jump to the first record, but if thats not the one I am looking, if you click search button again, it jumps to the next matching records etc... until I hit the I want?

I have tried the MoveNext, Previous, Last commands, but they dont work. Any quick fire coding out there?

View 1 Replies View Related

Help Requested On Access Search Criteria Forms

Apr 5, 2006

hi i just signed up to this site and need some assisstance from someone

i need to create a form in access 97 that enables me to search for a keyword on a given search area, for example the cd/dvd rom drive for files and folders

is this possible in access 97?

if so could someone help me out please?:confused:

cheers

View 1 Replies View Related

Forms :: Add Time Value To Time Data Type SQL Server Field In Access

May 6, 2015

how to be able to enter time in access form the same way as if would be an access table (1p = 1:00 PM; 1.25 = 1:25 AM etc)

View 1 Replies View Related

Forms :: Access 2003 / Dynamic Search Form Very Slow?

Nov 8, 2013

I am using John Big Bootys Dynamic Search Form (built in Access 2003) as it totally met my search requirements, however when typing anything into the search box it is realy slow, taking several seconds for each letter to show in the box.

This has always been a problem now and again, however some of us have upgraded to Office 2010, (although still using the 2003 built Db as we won't move to a 2010 version Db untill March next year) and now the problem is even worse that ever. Everything else seems to work really well except for this search function, however it is the search function that is used more that anything else.

View 1 Replies View Related

Forms :: How To Open A Specific File Using Search Function In Access 2003

Dec 5, 2014

I have a access 2003 database, and i am wondering if i can't setup a search function in a form that will open a file in windows explorer?

What i would like to do is have a test box that i enter in a number for example: 1234 then have a button named "Search" hit that button and it opens a corresponding file in windows explorer named 1234, or just opens that folder directly..

View 14 Replies View Related

How To Create Search Button Using Access 2007 That Can Search From Form

Jul 10, 2012

i need to create a system that can search data using keyword.so i want to create search button that i will create it at form. currently i have 1 table and in that table i have 10 fields which are project_name, doc_ref_no, doc_title, volume, book_no, author, doc_status, box_barcode, filling_location, doc_availability.

i have create 2 forms, one form for user to add new record and another one is to search record. the user can search by enter project name, doc title, volume and box barcode. for project name and volume, i use combo box and for doc title and box barcode i'm using text box.

i want to create search function that can detect from user keyword and even user did not fill in all the form, the system still can search the record.

View 5 Replies View Related

Queries :: Add A Box On Search Forms To Search 3 Cells Of Record For A Keyword

Jun 10, 2013

I currently have a database with a few search forms. I recently attempted to add a box on one of my search forms to search 3 cells of a record for a key word. What happens is when I go to search, say for P0442, it does not bring up all of the records that contain that keyword in the 3 cells I have outlined. If I step down the code in the OR boxes of the query, it seems to work better but then for some reason my other search criteria , (Tracking number etc) does not work. I will upload the database for reference. I am currently working on the Search(View Only) and that is where you will find the query to work on.

View 3 Replies View Related

Forms :: Search Text Box With Option Box As Criteria For Search

Mar 4, 2014

I am creating a a text box where the user enters a text then clicks an option from the option that is used as the criteria for the search e.g. Last Name, Phone , address then a command button wil run a query.

View 3 Replies View Related

Forms :: Search Combo Box To Search For A Field On Form

May 7, 2013

I have a search combo box to search for a field on my form. But it just goes to that particular record. The combo box is for client id and it has more than one record. How can I have it return just the records pertaining to the client id choosen in the combo box.

View 5 Replies View Related

How To Search For Words Out Of Order In An Access Search

May 15, 2006

So basically, what I have is a bunch of words in one memo field, for example:

dog cat cowboy tree flower

To search it, this is the code I have now.

' Check for LIKE Last Name
If Me.txtLastName > "" Then
varWhere = varWhere & "[LastName] LIKE """ & Me.txtLastName & "*" * " AND "
End If

The only problem is what I search for needs to be "in order", for example, if I search for dog, I'll get the table. But, if I seach for tree, I won't because tree was not place first. Can you please help me? Thanks a lot!

View 1 Replies View Related

Synchronising A LAN BE With A Website DB

Feb 10, 2006

Hi,

The situation is that we have a split DB on a LAN using Windows Server. The BE is on the server and the FE are distributed to each user PC on the LAN. (For historical reasons there are differing versions of Access at each user which was the primary motivation to split the DB)

We also have a copy of the DB on the company website which is to be updated via FTP on a regular basis. This is used for queries only by visitors. We now want our clients to be able to update their information on line in tandem with our local users.

The question is - what is the best method to keep these DBs synchronised?

My thought is to use replication with the LAN BE as the master DB and the website having a replicated version. Then we can periodically download the website version and synchronise the two - presumably we would have to disable the updating function on the website while we do this and then reload the new replicated version up to the website.

A problem I see already is that the website DB is not split where the local version is - is it possible to rejoin a split database? Synchronise it, upload a a replica and then split the BE and FE again?

All Ideas / Suggestions welcome

Tony Randell

View 4 Replies View Related

Website Parsing

Mar 25, 2008

I need some assistance parsing some information from a web address. Here is an example of what the web address is.-http://www.websitename.com/ct20/pages2/client_bcphone_service_order.aspx?client_id=160399 4&contract_document_id=924182&cipid=206123444-What I am trying to do is get the client ID and the contract id. The client id being 1603994 and the contract id being 924182. Any ideas would be appreciated.Gregg

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved