Forms :: Adding Breaks On A Form - Start And End Time
Jun 18, 2014
I have an input form for production. I need to be able to have a unbound box look at the start time and end time. I need it to determine if the times fall during a break or lunch. My fields in my table are - ID, Start Time, End Time. Example of what I need the control source formula to do is this. If I start at 6:00 AM and work till 10:00.AM and my break is Start Time 9:00 AM... End Time 9:10 AM. I need it to then show 10 in the box as result of the break. I have this so far as in my formula builder.
IIF([Start Time]<9:00 AM AND [End Time]<9:10 AM, 10, 0)
When I press enter it says I have an syntax error and I have checked to make sure the fields are correct. Also how would I go about adding on to this formula to add a lunch break on to it.
View Replies
ADVERTISEMENT
Sep 26, 2014
I am building a database where one Form displays records from 14 different tables. For some reason, when I recently try to add a field on to a form from a new table, the ENTIRE form loses the record source, and every single field that is already on the form gets that green dot in the corner with errors surrounding a record source that cannot be found. What am I doing wrong? Am I exceeding some limitations with forms?
View 4 Replies
View Related
Aug 16, 2007
I have a list of jobs for a report in which there are multiple jobs per page. When there is a page break in the report some jobs are being cut off and then started on the next page. I do not want any information from a job to be seperated by a page break. I just want a page break to occur after a full job listing. I don't mind if the page is short, just don't want any jobs broken up. Is there a way to accomplish this??? Thanks.
View 3 Replies
View Related
Jan 30, 2014
I have a subform in which I want to calculate the difference between a start time and finish time, the problem I am having is when the start time is on a different date to the finish time
Start 23:15 on 14th Jan finish 00:015 on 15th Jan, also I want the answer to be the number of minutes. The fields I have are
BatchStartTime Short Time
BatchFinishTime Short Time
BoilTime ([BatchStartTime] - [BatchFinishTime]) General Number.
There are many batches to enter per job and the MainForm has the StartDate as I didn't want to enter the StartDate for each batch.
View 4 Replies
View Related
Apr 10, 2015
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies
View Related
Nov 3, 2014
I have finger print machine and i already connect to it and get all log.then i tray to get data and here is the code that im using
SELECT Format(CHECKINOUT.CHECKTIME,"dd/mm/yyyy") AS CDate, IIf([CHECKINOUT.CHECKTYPE]=I,Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm")) AS StartTime, Format(CHECKINOUT.CHECKTIME,"hh:nn:ss ampm") AS EndTime, USERINFO.USERID, USERINFO.Name, CHECKINOUT.CHECKTYPE
FROM CHECKINOUT INNER JOIN USERINFO ON CHECKINOUT.USERID=USERINFO.USERID
WHERE (((Format([CHECKINOUT].[CHECKTIME],"dd/mm/yyyy"))='10/04/2014'));
how i get end time due to CHECKTYPE]=O
View 1 Replies
View Related
May 8, 2014
Currently if an employee attends a mandatory training session the details are entered individually into in a single table which contains all the employees' attendances to training, this is achieved via a bound form.
Works Fine.
My question is, if the training is carried out by a number of employees can this attendance be recorded on one form and assigned to each of the employees who attended?
Using Access 2003
View 3 Replies
View Related
Oct 23, 2013
I want to add three fields in a table namely from, to and diff .
How to add them in a form so that I can enter
The time in (xx:xx) 24hr format in the "from" and "to" fields and calculate and save the time difference in minutes to the "diff" field automatically.
I am using access 2010.
View 8 Replies
View Related
Feb 7, 2015
I'm working on a query ("Target Date of Completion") that takes the initial date started (from Step 1 of date started) and adds the EC (Estimated Completion) which is just shown in days. This will give an EST (Estimated Start time) for the next step in date format, which I would need the new column. Also, As you can see, the piece parts all have a different amount of steps, so this calculation would need to know when it's a different part.
View 7 Replies
View Related
Mar 23, 2014
I need to load my Default Form at start up of my database while office button,the Ribbon and the Navigation pane will be hidden. And when i go to form design view then i can use the ribbon and navigation pane.
View 2 Replies
View Related
Jun 2, 2015
I'm trying to calculate the difference between start and end time, which works fine with:
Total Time: DateDiff("n",[tblTaskTimes]![StartTime],[tblTaskTimes]![EndTime])
However, this is for a database that calculates billable time in 10th of an hour. So, for example, 1 hours would be 1, 30 minutes would be .5, less than 6 minutes would be .1.
The format for this expression is set up to a general number, if that matters.
It's gotta be something in the formula like multiplying this by 24 (for 24 hours) and then dividing by something. Nothing I'm trying is working.
View 7 Replies
View Related
Nov 7, 2014
I have a pair of captioned text boxes for taking the criteria for the search result. Currently the text boxes are tied with a date field. I would like to give the user's choice of a number of date fields. After some research, I believe option group control fits for this purpose. Unfortunately, I never try this function before.
View 1 Replies
View Related
Sep 18, 2013
I have a query that displays the start and finish time for an activity, I am trying to display the reults of the time between each activity....
For example
Name start End
aaa 14:07 14:09
aaa 14:11 14:12
The end time for the first activity was 14:09 and the next job was started at 14:11, so I want it to display 00:02: - (elapsed time)
Its very easy to do in excel as it would be =SUM(B2-C1) but haven't a clue how to do it in access.... is there any way?
View 3 Replies
View Related
Aug 5, 2015
I created a call logging/work tracking type Database using SharePoint 2007 lists for the backend and Access 2013 front end for about 60 users and it has been running smoothly for around two years .
We use a shared outlook calendar and I want to be able to pull meetings & appointment information into the database from the calendar so I can assign the meetings out to specific people and keep of a record that they where given the request to attend. I was able to use the import outlook folder to create a linked table and it has lots of great information from the calendar apart from the two most important things you need in a calendar Start_time & End_Time . Is there something I'm missing in regards to these two fields? I assume I'm doing something wrong but I can't figure out what, nor did I have much luck with the Search function on here or google.
This is the list of field names it does import(everything apart from the meeting time and is it a recurring appointment)
Importance
Icon
Priority
Subject
From
Message To Me
Message CC to Me
Sender Name
CC
To
Received
Message Size
Contents
Created
Modified
Subject Prefix
Has Attachments
Normalized Subject
Object Type
Content Unread
View 1 Replies
View Related
Oct 21, 2006
Hi,
I have a database that tracks jobs as they are being completed.
I have 2 tables, the first of which contains details of the jobs and the second contains details of the individual tasks that make up each job (Job and Task respectively)
Within the Job table, there are several fields, however the fields I am concerned with are JobKey, JobID, Start_Time and End_Time.
Currently, as each task within a job is completed, a new entry is added to the Job table with an updated End_Time. At the end of a job, there will be several entries in the Job table similar to
JobKey JobID Start_Time End_Time
1 1 10:00:02 11:00:07
2 1 10:00:02 11:01:14
3 2 10:02:12 11:24:45
4 1 10:00:02 11:02:34
5 1 10:00:02 11:05:25
etc
When I query the Job table, I end up with multiple references to the same job, where all I really want is a single reference to a job with the JobID, Start_Time and the End_Time the last entry relating to a particular job.
How would I write a query to give me a single reference to a JobID Start_Time and the final entry for End_Time?
eg From the above, my query should return
JobID Start_Time End_Time
1 10:00:02 11:05:25
2 10:02:12 11:24:45
Thanks for any help with this
W1dge
View 3 Replies
View Related
Sep 14, 2007
i have three fields.
StartTime, EndTIme and TotalTime,
i need to sum the StartTime to EndTime so that i will know how many hours it spent.
and also the total min.
pls could anyone help me...
thanks
View 14 Replies
View Related
Dec 18, 2005
Hi folks,
I've got two control buttons ('OK' and 'Cancel') on several forms. They work on the forms in Single Form view, but not on the one form that is in Continuous Form view. I couldn't find any mention of this behavior on this forum, but on another forum somebody mentioned that Continuous Form view makes control buttons do odd things. Any ideas on how to handle this?
Here's the code:
Private Sub OK_Click()
On Error GoTo Err_OK_Click
DoCmd.DoMenuItem acFormBar, acRecordsMenu, acSaveRecord, , acMenuVer70
Me.Visible = False
Exit_OK_Click:
Exit Sub
Err_OK_Click:
MsgBox Err.Description
Resume Exit_OK_Click
End Sub
Private Sub Cancel_Click()
DoCmd.Close acForm, "Glossary"
End Sub
View 3 Replies
View Related
Aug 10, 2015
I have the following code
SELECT Count(T_STUDENTS.studentsID) AS res1yes, T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup
FROM T_STUDENTS, T_COACHING
WHERE (((T_STUDENTS.res_vrijstelling)=False) And ((T_STUDENTS.stud_year)="1") And ((T_STUDENTS.stud_coach)=forms!F_cboCOACHING!cboCOACHING))
GROUP BY T_COACHING.COACH1res, T_COACHING.COACH1port, T_COACHING.COACHworkgroup;
It runs fine, untill the moment the count is 0. At that point it breaks the form. How can i tell access to deal with this? Somehow i need to replace the count result with 0 if there are no records that meet the criteria.
View 8 Replies
View Related
Dec 8, 2013
I am trying to write a more complex macro that will start another macro at a preset time, however I am getting stopped at the first hurdle - getting a macro to run another macro.
Here is the code i am using at the moment, all I want to do currently is click the first button, then get the second macro to execute. But no luck, getting error 2157 "cannot find the procedure"
Code:
Private Sub Command3_Click()
MsgBox "1st macro running", vbExclamation, "Note"
Application.Run "teststart1"
' Application.OnTime TimeValue("19:55:00"), "teststart1"
[code]....
View 1 Replies
View Related
Dec 9, 2004
Hello again,
I think my subject heading explains it. How would you add or subtract two short time formatted values and produce a short time value? Also, how would you change a short time value into number minutes. (i.e. 5:30 into 330) Thanks!
G
View 1 Replies
View Related
Jun 17, 2013
I want to add a new tab "Debt" in CustomerDetail form. So, I want that when I click tab "Dept" to get listing the customers who are in debt to the company.
How can I get a Dept information for that Customer in a Deptform?
What is the way to do it? Dept information are stored in Dept table.
View 1 Replies
View Related
Jun 8, 2005
Is there a way to set where the different forms will start, like location wise on the screen, when they are loaded?
View 1 Replies
View Related
Nov 26, 2013
I have a table Department
ID
DEPARTMENT
DEPARTMENT_EXPLINATION
I have a table Employee_Listing..This table includes:
Employee_ID (Primary Key)
LAST_NAME
FIRST_NAME
INITIALS
I have a table DISCREPANCY_LIST..This table includes:
DATE (Auto completes to current date)
EMPLOYEE_ID (Primary Key) (Brought over from Employee_Listing via form when initials are entered on form)
LAST_NAME (Brought over from Employee_Listing via form when initials are entered on form)
FIRST_NAME (Brought over from Employee_Listing via form when initials are entered on form)
INITIALS
DEPARTMENT
NUMBER_OF_UNITS
NUMBER_OF_DESCREPANCIES
NUMBER_OF_OK_UNITS
I have a form - DISCREPANCY_LIST..This form enters information into the DISCREPANCY_LIST table.The initials combo box is set: Limit to List Yes and Allow Value List Edits No If the user enters initials that are not stored in the Employee_Listing table they receive an error. Instead of an error I would like for them to receive a message asking if they would like to add these initials to the Employee_Listing table.If the user clicks Yes, then it will bring up the Employee_Listing form.If the user clicks No, then they are told to enter valid initials.
View 1 Replies
View Related
Apr 3, 2015
I have a table Items, ItemSizes and ItemTimes. That is for my item, I also have a table tableShowCost which is
the sales I have made at shows. I created a query from all of Items, the size of the item (from table ItemSizes) and
the ItemTimes (from tableItemTimes). Then, I created form from all of that.
So, now I have a form the displays all of the information about my item. Back to the Table ShowSales, it has multiple sales of different items, I want to know the total amount of sales I have made, so, I just did a easy query that gets me the total sales, but, I don't know how to get this information to display on my form, nor how to link an item on the query that gets me the total of each items sold, to the form.
(Should of thought of zipping it first)
Also, if some one does ask and gets the database, could they look and figure out why I cant go to the next record after opening it from the main form?
View 4 Replies
View Related
Jan 25, 2015
I am new to Access and I was trying to create database for chemical inventory handling.I have two tables. one of my tables (chemical info) has information on chemical properties. I used "Cas NO" as primary key. I have another fields such as "chemical name", 'product number" and etc.
In Second table (chemical inventory) i have "ID" field as primary key and I used lookup wizard in order to fill "Chemical Name" field. I thought it will be easy to pick up name rather than typing it because the names were complicated.After I created two forms. one form is chemicals info form based on chemical info table and other one is LAb_inventory based on chemical inventory table.
I set up Lab inventory form as main form and Chemicals info form as subform. Linking field is chemical name. So that when I chose chemical name from combo box i can see inventory data in main form and chemical properties information in subform. Now i have two problems..One of them is when I add new record to my subform I cant see this new record in main form. I suppose it is because chemicals names of each form is derived from different tables. furthermore in main form instead of chemicals name i see "my primary key CAS NO".
What i want to achieve is add new record to chemicals info form and fill up all chemical information save and in the main form to add new record choose new chemical name which i just added and fill up inventory information.
View 1 Replies
View Related
Jul 25, 2014
I am trying to add an animated gif file onto a form in access 2013.
I am trying to add a active x control Animation control but get an error,
Database doesn't support this active x?
View 1 Replies
View Related
