I'm having a bit of a problem with a database I'm trying to create, what I am trying to do is create a database to handle jobs in an IT workshop. The idea is that you generate the job card and then at the bottom you have a section to enter in the parts that are required for the job, and then have a report that prints out a list of all the parts required for all the jobs under a heading of the job card number.
The problem I am having is how to add this sub form / table to the job card sheet. I tried putting in a sub table, but that wont let me make additions to it, and I tried putting on a form but that wont retain more than one entry per job card (I have put it on continuous form).
productId ( which is filtered from combo boxes on main form) . productId contains two columns 1 bound column(id) ( hidden with width 0 ) 2 column (desription) ( shown with width 2 )
Now after entering the data when i come back to the form again . It hides the data from the productId field on subform , because data in combo box (on main form) doesn't match. Although the row is showing up , only the text in field (productId) is hidden.
Now when i change data in combo box on main form to match the ProductId , then the productId field text shows again. after changing combo box it hides . What i need is the existing data should not hide when i change the combo box selection.
see pic 1 where product matches and pic 2 where not. please note i am using master child relationship on the form/subform.
I'm trying to add a combo box field to an existing table and form. I added the new field to my existing table and set it up as an combo box added my row sources. Then added the new field to an existing form and now am getting a error stating "The record source "Table name and added field here" specified on this form or report does not exist. When I just make the new field a text box instead of combo box it works just fine.
So, I have two forms that I am trying to make work the same way.
With F1Entry I can use the combo box in the header to select different request numbers.
With F2Finance I cannot do this. It works if I set the Form Record Source to T2FIN, but when I try to Add Existing Field, something about selector combo box breaks and I cannot select different request numbers.
I am modifying an existing form that has some tabbed pages(subforms) in it and I am wanting to know how to add another page. I have created another subform that I am wanting to add to this main form as another tabbed page.
I have an existing Main form that has a sub form that the user uses to enter multiple records into a table....it works fine EXCEPT that I need to make it even easier and more intuitive and add a lot of labels. Basically the user selects items from a drop down list that adds items to a Work Order. I need to add some labels to the form to make it more descriptive for the user.
So, what I want to add multiple records using a single main form.
Is is possible to?:
1. simply turn the subform into a single main form? Can this be done by using a Command button or something similar?
2. copy all of the controls etc from the sub form into a new main form and have it all work nicely?
Hi. I have a table with a NAME field and a GENDER field.
How would I code a query so that if the gender is MALE than MR. would be added to the front of the existing data in the NAME field? MRS. if gender is FEMALE?
i.e., the result would be MR. SMITH, MR. JONES, MRS. CARSON...
Please bear with me, first post, trying to get to grips with Access for work!
We (a primary school) had a "bespoke" database set up using MS Access by someone who has long left the area and now we need to make changes and I, as the most computer literate person on site, have been volunteered to make these changes.
My level is beginner (for now) and my first job is to add some new options to a "Titles" table, four columns, six records. Column1 = ID#, Column2 = Male Titles, Column3 = Female Titles, whilst Column4 seems to hold items from Columns 2 & 3.
If I add a futher option, I get the error "Can't perform cascading operation: Entry must be one of the Titles as featured in the drop-down box or in the Titles table.
Now, as far as I can tell, I HAVE added the new option to the Titles table, and they DO show in the drop down box in the main spreadsheet display, BUT the error comes back as soon as I try to confirm the new title.
I found this wonderful code and would like to add Proper Case upon save. Have tried several variations to no avail. Any help would be appreciated.
Private Sub cboDayshiftPatent_NotInList(NewData As String, Response As Integer)
On Error GoTo Err_ErrorHandler
' provide text constants to reduce text later and allow for faster execution ' due to added speed from the compilation of constants Const Message1 = "The data you have entered is not in the current selection." Const Message2 = "Would you like to add it?" Const Title = "Unknown entry..." Const NL = vbCrLf & vbCrLf
'connection and recordset object variables Dim cn As Connection Dim rs As ADODB.Recordset
' show message box and evaluate if the user has selected Yes or No If MsgBox(Message1 & NL & Message2, vbQuestion + vbYesNo, Title) = vbYes Then ' open a connection to the connection object Set cn = CurrentProject.Connection ' initialise the recordset object Set rs = New ADODB.Recordset ' using the recordset object With rs .Open "lkupDPatent", cn, adOpenStatic, adLockPessimistic ' open it .AddNew ' prepare to add a new record .Fields("Dayshift") = NewData ' add unfound data into field .Update ' update the table .Close ' close the recordset connection End With Response = acDataErrAdded ' confirm record added Else Me.cboDayshiftPatent.Undo ' clear the entry in the combobox Response = acDataErrContinue ' confirm the record is not allowed End If
Exit_ErrorHandler: ' de-initialise our object variables Set rs = Nothing Set cn = Nothing Exit Sub
Err_ErrorHandler: ' display error message and error number MsgBox Err.Description, vbExclamation, "Error #" & Err.Number Resume Exit_ErrorHandler
I was tasked by my CFO yesterday to add a new element to my existing database. I will try to keep what I am trying to do simple.
Basically we do finance for multiple projects. each project has employers.
My database records these employers names, SSN, dates registered, program they are in, and a few other elements as well.
What I have been tasked to do is create a new table with the project managers in that table. this way in a query or report i can pull "sally sue's" projects or whoever I needed to. There are many PM's who have more than one project.
Here is what I have for relationships:
On the Project Managers table I have a PK for ID and then the PM Name as a second field. the ID field is linked to the Programs table which has a PM ID and Program name
The Program table is also related to the employer table which has all of the employers and their info. the relation between the two tables is the Program Name.
So when I run a query or report my goal is to be able to pick any project manager and get the associated count of employers under all of that projects managers programs. I have gotten errors when running queries. Perhaps I have the relationships set up wrong?
I have a form with a subform (in continuous) I have on the main form a few unbound text boxes which once im happy with the results i press a command button on mainform which adds the unbound text boxes to a new record on subform im struggling with this one. I have done similar before but that was with the unbound text boxes in header of the actual form i was adding record too.
I have a database with a form and a sub form it works great. However I needed to add a tab or page to the sub form when I returned to the form view the sub form is there but you cant see anything. change back to design view and its there. I didn't change any properties on the sub form. and If I delete the page I added it works just like it did before I added it. also the sub form is linked to the main form master and child. would I have to link the tab also??
ITEM has a one to many relationship with ITEM CREATOR. CREATOR has a one to many relationship with ITEM CREATOR.
I have added a subform to the data entry form for ITEM. The fields in the subform are the fields in the ITEM CREATOR table, i.e. Item ID and Creator ID. The purpose of the subform is to link an Item to a Creator and populate the ITEM CREATOR table.These are the subform properties:
Record Source: Item Creator subform Link Master Fields: Item ID Link Child Fields: Item ID
The subform contains a combo box for Creator ID. These are the properties.
Control Source: Creator ID Row Source: Item Creator Subform query Bound Column: 1 Column Count: 9
When a user clicks on the combo box drop-down, the first 9 fields in the CREATOR table are displayed. The purpose of this is to give the user more information when linking ITEM to CREATOR, so that the correct Creator ID is chosen and the Item is linked to the correct Creator. Two of these fields are Creator Surname and Corporate Creator.
The issue is that CREATOR now contains over 2500 records. When trying to link an Item to a Creator the drop-down list that appears when the Creator ID combo box is clicked is very long and the user is potentially faced with a long time spent scrolling the list. I would like to filter the drop-down list by Creator Surname so that the user enters a surname and only the Creator IDs for the Creators that have that surname appear in the list.
I suppose a field could be added to tblProspectSkill, and the command button code could include that field in the SQL, but I keep thinking there should be a better way than copying the values. However, my attempts to link have led either to multiplying the record count by 9 or a recordset that cannot be edited.
the idea is that a position in football will be assigned nine key skills that are important to the team that is thinking about acquiring that player. For a position (quarterback, for instance) there will be a master list of nine skills, along with an importance rating (1, 3, or 5, which is essentially high, medium, or low) for each skill.
Then the prospect (the player being considered) is assigned a position such as quarterback. A command button creates nine records in a Prospect Skills table that is related to the Prospect table. The nine records that are added are the nine skills described in the previous paragraph. Each skill in this listing is assigned a grade, which has a numerical value as well as a letter grade. The numerical value is then multiplied by the skills importance rating (1, 3, 5) and the results are then averaged for a final value.The difficulty I described in the first paragraph is that when I try to link to the importance rating I end up with 81 records (9 skills * 9, apparently), but I can't sort out how to change that in a writable query.
What I have is a database that I have done some tweaking on and in the meantime the original db has been in use which has added around 200 or so more records in the table.
What I would like to do is to just update the db that I have been working on with the older db table(the one who has the additional 200 records).
EX. DB A(Old DB, Newer Table) DB B(New DB, Older Table)
I want to put DB A table into DB B
Is this a simple fix? Or do I need to write some sort of query to update the records in the old table? I've tried to export the excel file and then import but it puts it in unrelated objects and then my switchboard or nothing works.
tblProductFacilityMM - ProductToFacilityID - ProductIDFK (combined with FacilityIDFK to make a PK) - FacilityIDFK
As I'm writing this out, I am realizing that tlbProductFacilityMM.producttoFacilityID is probably not necessary, but that I don't expect that to have much significance to the issue. So I've setup a query between the two tables:
Code: SELECT tblProductInfo.ProductID, tblProductInfo.ItemNumber, tblProductInfo.JDEDescription, tblProductFacilityMM.FacilityIDFK, tblFacility.FacilityDescription FROM tblFacility INNER JOIN (tblProductInfo INNER JOIN tblProductFacilityMM ON tblProductInfo.ProductID = tblProductFacilityMM.ProductIDFK) ON tblFacility.FacilityID = tblProductFacilityMM.FacilityIDFK;
And used it to create my subform which is simply a drop down box for tblProductFacilityMM.FacilityIDFK. My main form is one that has already been in use for 6 months or so, it is based off the tblproductinfo table and needs to have the option to select multiple Facilities for each ProductID. I inserted the subform, but when I try to select a facility I get an error that reads:
Quote: Cannot Join Records; Join key of tblProductFacilityMM not in recordset.
I have a simple database that I inherited, that contains basic customer contact info. We want to start adding more functionality to the database, so I've done alot of research to learn about how to begin normalizing my data.The existing table does not contain a useful primary key, since we may have multiple individuals from the same company, companies with very similar names, etc.
I would like to add an AutoNumbered field to use as a CustomerID/primary key, but I can't seem to find a way to do so. Here is what I've tried so far:
I have tried to add a field to the table, and make it an AutoNumber data type. When I do so, I can error message saying that I cannot make a field AutoNumber if any other field in the table already has data entered in it.I have tried to create a new table containing only an AutoNumber PrimaryID field, and then import data from the existing table, but that just creates a 3rd table.
I am in the process of making a database and basically I have everything done but this saving, loading and adding/removing part.
Would it be possible for me to allow end-users to run queries that they could save, load, add to the existing table or remove from the existing table?
When I say Add/Remove what I mean is could a user of the database run a search of every customer in the state and then remove everyone in County X or on the other hand could they run a search of every customer in the state and then add every customer in a neighboring state.
Kinda like layers and again I have all of the criteria set up I just need the Save, Load and Add/Remove buttons on the form. I should add that I do not want users to save over the main table I want them to save it as there own text file they can upload later.
I'm having difficulty updating an existing record in my form. I can enter a docket number on my form and when i hit my button (Find Docket) it brings up all the customers info (name, date, invoice, vat, total, etc.) What i want to do then is be able to amend/update the record. Just wondering do i need to put vba code in my save button and how to code it and is it similar to my find data code below.
Here is my save function code:
Function SaveData() As Boolean Dim db As Database Dim rs As DAO.Recordset
Set db = CurrentDb Set rs = db.OpenRecordset("Skips Delivered")
Each month I receive a new excel spreadsheet (alpha Roster), Last month I created a form so that I can track certain things off of the Table (spreadsheet), I just received the new Spreadsheet for this month and was wondering if I can use the existing form and how hard it is to link it to the new spreadsheet? Is that even possible? I don't want to have to re create the form every month, I would like to just bring the new alpha roster in and be ready to work.
I have read where you can drag fields onto the tab pages to create a form or you can place a subform onto a tab page, but can you drag an existing form onto a tab page?
I have done it and it is working, but I just wanted to know if this is ok to do or would it lead to problems.
