I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I'm creating a database about Vets and I need to make a button on my menu form that will open something like message box that will allow me to type in something (in my case Customer ID) which will then apply the filter on the customer form and allow me to do edits. I have only done the macro that will open the customer form but can't figure out how to do the filter part.
I want to create a navigation form, or any form for that matter that has an embedded report. The report has data arranged by ClientID. I would like to create buttons down the left side of my form (why I thought a navigation form could work) where I can put the client name on the buttons and when I click them the report will filter to only show that clients data. I have client tables and the report data linked in queries, but just need to know how to get started with these buttons acting as ID sorters.
For example: ClientID: 1 = Client: ABC Corp
In my report ClientID 1's data is grouped along with all other client ID's.
In my form I'd like buttons down the left side with ABC Corp written on it (followed by buttons for the other clients) and then when I click the ABC Corp button only ABC Corp's data shows on the page from the embedded report...
How do I apply a filter that automatically loads when a form is opened? For example, I have a check box and I only want to load records where the box is checked.
I am trying to filter a subform based in a combobox. What im doing wrong, is it the Sintax? This is what i have so far..
Private Sub Buscar_Click () Dim strFilter As String strFilter = Me.CombNomes.Value Me.subfrmBANCO.Form.Recordsource = "[Nome]=""&strFilter&""" Me.subfrmBANCO.Requery End Sub
'subfrmBanco is a subform based on a table called "BANCO"' '[Nome] is the field in BANCO that im trying to filter on 'CombNomes is the combobox im using as filter parameter
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
I am trying to create a form with control buttons on the form for all the letters of the alphabet. When a user clicks on the button for A, I would like them to only see records that starts with an "A". I assume that I should apply an event to the button's OnClick-property, with a filter, but I can't seem to get it right...any suggestions would be very much appreciated!
Hello everyone. I am having trouble with applying filter on 2 date fields in form. I have succeeded by applying fiter on report by Date, but I just can't seem to work it out on Form! I believe there has to be something to do with the DoCmd code.
I have a main form (frmRate) which has fields (txtDate & txtValidity) that contain dates. I have a subform called (frmSearchRateCustomer) which has 4 fields (txtStartDate, txtEndDate, txtStartDate2, txtEndDate2) where the data range should be filled in as search criteria. I have also an additional combobox (cboCustomer) where user can select customer as a search criteria as well. I have a button that has to do the Search in frmRate. The combobox criteria works very well, just the date filtering is not working. I am pasting my code as follows:
Code:Private Sub cmdSearch_Click()On Error GoTo Err_cmdSearch_ClickDim strCustomer As StringDim strFilter As StringDim stDocName As StringDim strForm As StringDim strField As String 'Name of your Order field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#dd/mm/yyyy#"Dim strField2 As String 'Name of your Arrival field.Dim strWhere2 As String 'Where condition for OpenReport.Const conDateFormat2 = "#dd/mm/yyyy#" strForm = "frmRate" strField = "txtDate" strField2 = "txtValidity" ' For the Order Date Search Criteria Date range If IsNull(Me.txtStartDate) Then If Not IsNull(Me.txtEndDate) Then 'End date, but no start. strWhere = strField & " < " & Format(Me.txtEndDate, conDateFormat) End If Else If IsNull(Me.txtEndDate) Then 'Start date, but no End. strWhere = strField & " > " & Format(Me.txtStartDate, conDateFormat) Else 'Both start and end dates. strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) & " And " & Format(Me.txtEndDate, conDateFormat) End If End If ' Debug.Print strWhere 'For debugging purposes only. ' For the Arrival Date Search Criteria Date rangeIf IsNull(Me.txtStartDate2) Then If Not IsNull(Me.txtEndDate2) Then 'End date, but no start. strWhere2 = strField2 & " < " & Format(Me.txtEndDate2, conDateFormat2) End If Else If IsNull(Me.txtEndDate2) Then 'Start date, but no End. strWhere2 = strField2 & " > " & Format(Me.txtStartDate2, conDateFormat2) Else 'Both start and end dates. strWhere2 = strField2 & " Between " & Format(Me.txtStartDate2, conDateFormat2) & " And " & Format(Me.txtEndDate2, conDateFormat2) End If End If If IsNull(Me.cboCustomer.Value) Then strCustomer = "Like '*'" Else strCustomer = "='" & Me.cboCustomer.Value & "'" End If ' Build filter string strFilter = "[txtCustomerName] " & strCustomer DoCmd.OpenForm strForm, acNormal, , strWhere ' for date DoCmd.OpenForm strForm, acNormal, , strWhere2 ' for date stDocName = "frmRate" DoCmd.OpenForm stDocName, acNormal ' Apply filter to report With Forms![frmRate] .Filter = strFilter .FilterOn = True End WithExit_cmdSearch_Click: Exit SubErr_cmdSearch_Click: MsgBox Err.Description Resume Exit_cmdSearch_Click End Sub
I have used the same code as I have used for my Report, just changed few things like rpt --> frm etc...
I Have 2 combo box on a form: Product_Type (6 values) and Product_Name (30 values and each belongs to a type), I want to narrow down the Product_Name to related Product_type whenever I select a type in the first field. Is there anyway to do this?
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
I have a query where on an IIF result a field is displayed or an "OK"
I have an imported field of 6 chrs where I only want the left 5 so I use Loc:=Left([Location],5) ,
I then compare the result in, MoveTo: to another fixed field [PreferLoc]
MoveTo: IIf([Loc]=[PreferLoc],"OK",[PreferLoc])
I wish to citeria out all the "OK" values so I have <>"OK" in the critria section but when I try to run the query I am presented with a selection box asking for Loc This Query feeds a report so I set the filter to yes in the report properties and use [MoveTo]<>"OK" as the filter and this works great until I close and reopen the app where the filter has gone ? Can anyone advise where I am going wrong with my query and or my report ?
I have a navigation form which has two subforms on it (ie 2 tabs linking to different forms). I have got aq filter working for one of the forms but not on the other. This is using
If IsNull(Me.txtoperationscontract) Then MsgBox "Please type a contract number into the textbox!", vbInformation + vbOKOnly, "Incorrect Details" Else Me.OperationsSubform.Form.Filter = "[Contract]='" & Me.txtoperationscontract.Value & "' " Me.OperationsSubform.Form.FilterOn = True End If
The problem is that it does not work on subform B because the Contract field does not exist.
I am working on an ADP ( first time working with this ). I have a form that is based on a parametized query.
The record source for the form is the parametized query which works fine the first time it is brought up. When the user wants to change the client number, a button "change client" is clicked and the event that gets triggered is openform=("edit client")...... Well, instead of being prompted, I get the error "The ApplyFilter action contiains a filter name that cannot be applied".... When I do a right -click on that same button, and "remove filter "I can get my prompt, but I dont want to keep doing that. I am not sure how to remove the filter from this button. I am not sure what the error message is telling me. Thanks for your help.
I have created a runtime setup package for a friend to let her use my Access 2010 application, without having to purchase Access 2010. However, the ApplyFilter macro in one of the forms doesn't work in the runtime environment. The message suggested I use a SelectObject before ApplyFilter but that gave me another error.
I have an issue trying to apply a filter to a record-set. Here's the code:
Dim choice As String Dim rset1, rset2 As DAO.Recordset Dim dbs as DAO.Database Dim var As Variant
[code]...
Whenever the last line is executed, i.e. rset2=rset1.OpenRecordset, I get the following error message:<<<Too few parameters, Expected 2>.. It used to work before? Maybe an issue with my library?
I am using the Navigation form and I have a tab that has all the sales quotes for a particular salesperson. Because my salespeople like to work with paper I have created sub tabs which contain a report with the same information but filtered based as follows: this Month, this year, and Last year. This report needs to be printable based on the filtered information so I created a print button within the report however when clicked it prints the entire report not the filtered report.
The filter criteria is located in the navigation button, navigation where under the data properties. I have the on click event of the button set to open the report in print preview but I need to know how I filter the where in the macro to read the criteria from the active navigation button property?
New to the navigation form: I need several forms in the navigation form to all relate to the same client ID field. I have this information on the main form but the form with in the navigation form will not pick it up.
I have tried =[Forms]![Frm Client Information Navigation Panel]![ClientID] But just cant get it to pick up that information...
I would like to have something like the master link fields and, child link fields but when I add a form to the navigation form this option in not available.
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
I am attempting to create a Navigation Form to allow another computer in my network to be able to utilize necessary forms within a database (through RunTime). I was hoping this would be a clean task by simply loading the forms into the tabs of the Navigation Form, however that is clearly not the case.
For starters, When attempting to use a form that has some VBA behind it (Docmd.ApplyFilter based on a selection from a combo box), I am given the error stating: "The action or method is invalid because the form or report isn't bound to a table or query."
After searching on this error, I believe it's because my Navigation Form does not have a record source. If this is the case, then I am confused as to what record source it should have, as with the 3 forms I need to access through the Navigation Form all pull data between various tables and queries within the database (some not related).
Now I've also come to the conclusion that my VBA references now must change in order to correctly use my forms. A correct reference would look something like:[Forms]![Navigation Form]![NavigationSubform].[Form].[My Form's Control]..Is this necessary in order to write any events, such as an AfterUpdate on a combo box?
