I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
View RepliesI am trying to create a form with control buttons on the form for all the letters of the alphabet.
When a user clicks on the button for A, I would like them to only see records that starts with an "A".
I assume that I should apply an event to the button's OnClick-property, with a filter, but I can't seem to
get it right...any suggestions would be very much appreciated!
Access 2010 64bit
I have an issue with the Access "Toggle Filter Button" being ticked whenever I open a form from a listbox (dbl click)...
[tblOrders] - (Key) [ID] - [Date] - [Consignee] (Text) - [OrderComplete] (Yes/No)
[tblPurchaseOrders] - (Key) [ID] - (Key) [AssignedID] - [ProductName] - [Weight]
This is just an example and it is not exactly what my database looks like however it allows me to explain easier.
tblOrders and tblPurchaseOrders are related One-to-Many ( tblOrders.[ID]->tblPurchaseOrders.[AssignedID]).
Anyways, I have a listbox on my primary form that lists tblOrders by ID, Date, Consignee and OrderComplete. When I first built the form and I bound the listbox to column 0 ([ID]) and created the event on double-click which the code looked like this:
Code:
Private Sub listOrders_DblClick(Cancel As Integer)
Dim stDocName As String
Dim stLinkCriteria As String
Dim intLinkID As String
intLinkID = Me.tblOrders.Value
stLinkCriteria = "[ID] = " & intLinkID
Debug.Print stLinkCriteria
stDocName = "frmManageOrders"
DoCmd.OpenForm stDocName, , , stLinkCriteria
Exit_Command23_Click:
Exit Sub
End Sub
Now, for whatever reason - either something I've changed or a bug somewhere... when I double-click the list item, it opens as a new record rather than the corresponding record. I noticed that the "Toggle Filter" button on the access ribbon was ticked so I unchecked it and it immediately switched to the proper record. Why does this happen and what (if common) changes can make this appear or work this way? I am a novice with Access and I am still learning VBA. I struggle with not knowing parameters by heart, although the syntax seems to be similar to other languages I've worked with.
I had somehow enabled "Data Entry" which is located on the Property Sheet of a Form under the "Data" tab. Apparently this mode removes your ability to actually filter values properly and is intended for what you'd assume it means - Data Entry.
I have a form that opens with a filter on depending on what the user is supposed to see. When I deploy this, I don't want them to see the "toggle filter" button at the top. I tried making a custom ribbon like this:
Code:
<customUI xmlns="http://schemas.microsoft.com
/office/2006/01/customui">
<ribbon startFromScratch="true">
<tabs>
<tab idMso="TabHome" visible="false" />
[Code] ....
But it didn't seem to have any effect. When I applied it, it didn't even create "A Custom Tab". That might be because I have disabled everything that I could disable on the "Current database" options, I'm not sure.
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I am trying to filter a subform based in a combobox. What im doing wrong, is it the Sintax? This is what i have so far..
Private Sub Buscar_Click ()
Dim strFilter As String
strFilter = Me.CombNomes.Value
Me.subfrmBANCO.Form.Recordsource = "[Nome]=""&strFilter&"""
Me.subfrmBANCO.Requery
End Sub
'subfrmBanco is a subform based on a table called "BANCO"'
'[Nome] is the field in BANCO that im trying to filter on
'CombNomes is the combobox im using as filter parameter
I'm creating a database about Vets and I need to make a button on my menu form that will open something like message box that will allow me to type in something (in my case Customer ID) which will then apply the filter on the customer form and allow me to do edits. I have only done the macro that will open the customer form but can't figure out how to do the filter part.
View 2 Replies View RelatedPrivate Sub Form_Load()
Forms(0).ServerFilterByForm = True
End Sub
This 2002 code is producing an error ?
I am trying to apply a filter to a datasheet subform using a combo box.
This is the code I have used on the "after update" event:
[Ordering - Price list items].Form.Filter = "[Secondary Category]=" & Combo72.Column(1)
[Ordering - Price list items].Form.FilterOn = True
When I run the query i get the following error:
Runtime error 3021:
No current record
I am not sure why it isn't working as this is how I have set up other combo box filters and it worked fine.
I am using an apply filter in a form to find records in a split form.
The macro which I am using is:
[SLIDE] Like "*" & [Forms]![SALES]![ENTERREFDATA] & "*"
However I the filter to return only records which match the text exactly.
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
Is there a way to show the toggle buttons in an option group as NOT selected when the form first loads up? I've cleared all the default value properties in the table and the form but it always loads as showing one of the buttons pressed/selected. I want the form to load and both buttons in the group look the same.
View 3 Replies View RelatedI am making a specialty form where it must toggle on or off when the user clicks on a boxed area. Since toggle backgrounds cannot be set to transparent, I need to do it some other way. I thought of either using a button to control a hidden checkbox, or just writing code altogether. The problem is that I don't know what code to use to programmatically change the state each time the box is clicked.
View 14 Replies View RelatedI have a navigation form with a combo box. The combo box has a running list of manifest numbers. I select a manifest number, then click a button that brings up a new form with data related to the selected manifest.
However, I have to click and unclick the 'Toggle Filter' button on the new form to show the correct data each time I open the form.
I have a form with about 10 subforms on it, all of which have queries as source objects. All of these queries are based off the same table which contains a field for Customer. What I would like to do is have a toggle button on this form that, once pressed, essentially adds a "not like" criteria to each of these subforms' queries EXNot Like "Customer_A"). When depressed, the queries/subforms should exist as is.
My first issue is that when I add a toggle button, the control wizard does not start. It starts up fine for any other control, however. For example, I imagine that on the After Update event of the toggle button I would requery each of the subforms, but I'm not sure how to add the "not like" criteria to each of the underlying queries.
I have a continuous form based on table "INCOMES" that shows all the payments received, which mediums can be (field "PMNT_MEDIUM"):
- check
- transfer
- taxes
- cash
Table "INCOMES" is filled using another form, but in this particular form I just want to show "check", "transfer" and "cash" (not "taxes") so that I can track all the cash incomes.
Note: taxes are loaded because they appear in my invoices and I need them there to reach the invoice total amount.So my form has a search bar which allows me to search by PMNT_MEDIUM listing all "checks", all "cash" or all "transfer". I can also search by payment number (meaning: check number). To that end I have a "search" button that applies the filter. And I have another button that "cleans" the filtering by "putting a "" in the search-bar and then calling the "on click" of the search button".
What I need is, no matter if I click over the "search" or "clean" button, it NEVER shows me the "taxes".Search button, on click code:
If IsNumeric(Me.busq_chq_med) Then
Me.Filter = "[PMNT_MEDIUM_NUMB] =" & Me.SEARCH_BAR
Else
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*' or [INVOICE] like'" & Me.SEARCH_BAR & "*'"
End If
Me.FilterOn = True
Clean filter button, on click code:
[SEARCH_BAR] = ""
Call [Search button]_click
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.FilterOn = True
I have a query where on an IIF result a field is displayed or an "OK"
I have an imported field of 6 chrs where I only want the left 5 so I use
Loc:=Left([Location],5) ,
I then compare the result in, MoveTo: to another fixed field [PreferLoc]
MoveTo: IIf([Loc]=[PreferLoc],"OK",[PreferLoc])
I wish to citeria out all the "OK" values so I have <>"OK" in the critria section but when I try to run the query I am presented with a selection box asking for Loc
This Query feeds a report so I set the filter to yes in the report properties and use [MoveTo]<>"OK" as the filter and this works great until I close and reopen the app where the filter has gone ?
Can anyone advise where I am going wrong with my query and or my report ?
thanks in advance
S
Hi !
I have in Form textBox and toggle button.
How could i Filter Form by Value in TextBox? (when toggle button is pressed, Form show records filtered by texbox, when unpressed - shows all records.)
Thank You in advance!
Hi,
I am working on an ADP ( first time working with this ). I have a form that is based on a parametized query.
The record source for the form is the parametized query which works fine the first time it is brought up. When the user wants to change the client number, a button "change client" is clicked and the event that gets triggered is openform=("edit client")...... Well, instead of being prompted, I get the error "The ApplyFilter action contiains a filter name that cannot be applied".... When I do a right -click on that same button, and "remove filter "I can get my prompt, but I dont want to keep doing that. I am not sure how to remove the filter from this button. I am not sure what the error message is telling me. Thanks for your help.
I have created a runtime setup package for a friend to let her use my Access 2010 application, without having to purchase Access 2010. However, the ApplyFilter macro in one of the forms doesn't work in the runtime environment. The message suggested I use a SelectObject before ApplyFilter but that gave me another error.
View 5 Replies View RelatedHow do I apply a filter that automatically loads when a form is opened? For example, I have a check box and I only want to load records where the box is checked.
View 1 Replies View RelatedI have an issue trying to apply a filter to a record-set. Here's the code:
Dim choice As String
Dim rset1, rset2 As DAO.Recordset
Dim dbs as DAO.Database
Dim var As Variant
[code]...
Whenever the last line is executed, i.e. rset2=rset1.OpenRecordset, I get the following error message:<<<Too few parameters, Expected 2>.. It used to work before? Maybe an issue with my library?
I have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
Is there a way to apply a different filter to each column in a table without the filters affecting each other?
View 2 Replies View RelatedHi!
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
Thanks.
I have a form with 2 list boxes, part number and modification. There is a subform containing another list box that is supposed to show the part information (bpn,vendor,status,etc.) that corresponds to the selected part number/modification in the parent form list boxes.
The part info list box has multiselect enabled and what i want to is be able to select multiple line items and press a button which then sets all of the selected line items status to "Request Removal". This is my code for the button:
Private Sub removeButton_Click()
Dim varItem As Variant
With Me.acbModList
For Each varItem In .ItemsSelected
MsgBox (Me.Status.Value & Me.[Part Number].Value)
Me.Status = 6
Next
End With
End Sub
The msgbox was for debugging purposes. Here's my issue; the for each actually does iterate through each selected item but the value for the line item doesn't change along with it. For example, when I selected 3 items, the msgbox will pop up 3 times but each time will have the same information (first item in the table) even when that item isn't selected.
My next issue is that I am receiving an error message with "Me.Status = 6" stating "You cant assign a value to this object". 6 refers to the id of the status i want to set it to.