I am trying to filter a subform based in a combobox. What im doing wrong, is it the Sintax? This is what i have so far..
Private Sub Buscar_Click () Dim strFilter As String strFilter = Me.CombNomes.Value Me.subfrmBANCO.Form.Recordsource = "[Nome]=""&strFilter&""" Me.subfrmBANCO.Requery End Sub
'subfrmBanco is a subform based on a table called "BANCO"' '[Nome] is the field in BANCO that im trying to filter on 'CombNomes is the combobox im using as filter parameter
Hello everyone. I am having trouble with applying filter on 2 date fields in form. I have succeeded by applying fiter on report by Date, but I just can't seem to work it out on Form! I believe there has to be something to do with the DoCmd code.
I have a main form (frmRate) which has fields (txtDate & txtValidity) that contain dates. I have a subform called (frmSearchRateCustomer) which has 4 fields (txtStartDate, txtEndDate, txtStartDate2, txtEndDate2) where the data range should be filled in as search criteria. I have also an additional combobox (cboCustomer) where user can select customer as a search criteria as well. I have a button that has to do the Search in frmRate. The combobox criteria works very well, just the date filtering is not working. I am pasting my code as follows:
Code:Private Sub cmdSearch_Click()On Error GoTo Err_cmdSearch_ClickDim strCustomer As StringDim strFilter As StringDim stDocName As StringDim strForm As StringDim strField As String 'Name of your Order field.Dim strWhere As String 'Where condition for OpenReport.Const conDateFormat = "#dd/mm/yyyy#"Dim strField2 As String 'Name of your Arrival field.Dim strWhere2 As String 'Where condition for OpenReport.Const conDateFormat2 = "#dd/mm/yyyy#" strForm = "frmRate" strField = "txtDate" strField2 = "txtValidity" ' For the Order Date Search Criteria Date range If IsNull(Me.txtStartDate) Then If Not IsNull(Me.txtEndDate) Then 'End date, but no start. strWhere = strField & " < " & Format(Me.txtEndDate, conDateFormat) End If Else If IsNull(Me.txtEndDate) Then 'Start date, but no End. strWhere = strField & " > " & Format(Me.txtStartDate, conDateFormat) Else 'Both start and end dates. strWhere = strField & " Between " & Format(Me.txtStartDate, conDateFormat) & " And " & Format(Me.txtEndDate, conDateFormat) End If End If ' Debug.Print strWhere 'For debugging purposes only. ' For the Arrival Date Search Criteria Date rangeIf IsNull(Me.txtStartDate2) Then If Not IsNull(Me.txtEndDate2) Then 'End date, but no start. strWhere2 = strField2 & " < " & Format(Me.txtEndDate2, conDateFormat2) End If Else If IsNull(Me.txtEndDate2) Then 'Start date, but no End. strWhere2 = strField2 & " > " & Format(Me.txtStartDate2, conDateFormat2) Else 'Both start and end dates. strWhere2 = strField2 & " Between " & Format(Me.txtStartDate2, conDateFormat2) & " And " & Format(Me.txtEndDate2, conDateFormat2) End If End If If IsNull(Me.cboCustomer.Value) Then strCustomer = "Like '*'" Else strCustomer = "='" & Me.cboCustomer.Value & "'" End If ' Build filter string strFilter = "[txtCustomerName] " & strCustomer DoCmd.OpenForm strForm, acNormal, , strWhere ' for date DoCmd.OpenForm strForm, acNormal, , strWhere2 ' for date stDocName = "frmRate" DoCmd.OpenForm stDocName, acNormal ' Apply filter to report With Forms![frmRate] .Filter = strFilter .FilterOn = True End WithExit_cmdSearch_Click: Exit SubErr_cmdSearch_Click: MsgBox Err.Description Resume Exit_cmdSearch_Click End Sub
I have used the same code as I have used for my Report, just changed few things like rpt --> frm etc...
I Have 2 combo box on a form: Product_Type (6 values) and Product_Name (30 values and each belongs to a type), I want to narrow down the Product_Name to related Product_type whenever I select a type in the first field. Is there anyway to do this?
Is there anyway that we can do cascading combobox in the same datasheet view of subform? Basically I'd like to filter "Account Name" based on "Plan#" selected in the same record of subform.
I am having an issue trying to show all records when I load my form. It loads correctly when I don't have a record source for the main form. However, the combobox filters will not work. My goal is to have users be able to use the datasheet, subdatasheet and combobox filters. I can get the form to work just fine when I link the Main form and subform, but when the form opens it is filtered on the first record. I have been successful with this approach when using other forms, but they didn't require a subdatasheet.
Is there anyway I can have the comboboxes to filter yet be able to show all records until the user selects filters? Is this possible?I finally got my Manager to agree to use a database instead of Excel files based on this form setup and I need to make as "user friendly" as possible (look and function like a spreadsheet) I attached some pics of the form along with the code for the filter.
I have a form with a bottom that has a macro that uses applyfilter to filter the current form based on what is within a textbox located on the form.
I used the macobuilder and have my where condition as
[num] Like "*" & [Forms]![frm_Main]![Text181] & "*" Or [name] Like "*" & [Forms]![frm_Main]![Text181] & "*"
This works when I open the form by itself but when I try adding the form to a navigation form I get prompted to put in "num" and "[Forms]![frm_Main]![Text181] " etc. when I click the bottom.
I'm creating a database about Vets and I need to make a button on my menu form that will open something like message box that will allow me to type in something (in my case Customer ID) which will then apply the filter on the customer form and allow me to do edits. I have only done the macro that will open the customer form but can't figure out how to do the filter part.
I have a form with data fields and a list box, data is coming from a query. When I add a toggle button to apply a filter to the data on the form, the data in the fields are filtered, but the list box still shows all the data items. How do I use a toggle button or something on the form that when activated it filters the data in the list box and the list box only shows the filtered content.
I'm trying to implement a macro to filter through accidents to see if my company has already been hired on a particular case.
In the first form the user enters the date, location, and last name of one of the drivers. Then they click a button which opens a new form as a datasheet with accidents that match ANY of the three controls. Evidently, I need a filter that contains some form of a series of OR operators.
However, whenever I try any variation of a button that opens the second form and then applies the filter, I always get no matches.
I have a table contains 5/6 column. now i need to filter the table on a form randomly.
Suppose I have 6 different combo box for 6 column. Now on the sub form the control shows the whole table. i this case i have clicked the 3rd combo box, then it will show the whole column in its list. if i select any one of it the table will show the common values below. then i will click the second combobox which will populate the present data shown into the subform table after the first filter.
After that i wish to filter the fifth column where the fifth combobox will populate the data after the second filtering.
By all means the active data into the column will ony populate into the combobox.
Currently I have a main form w/ subform. In the main form, a user selects a bond's serial number from a combo box and the subform displays the bond's returns for the months owned along with a start date (each month has its own start date). So if I enter bond ABC in combo box, the subform will display "13-01-01, 4%" for January, "13-02-01, 8%% for February..etc.
So if we owned a bond from January to March, it will display the three months' returns. I want to add two combo boxes: begin and end date so that I can filter the subform to only show a particular set of months' returns.
I have three tables right now: Cusips, which lists each bond's serial number, CusipStartPK, which lists the monthly returns for each serial number, and ParameterDates, which is a list of four start dates--ie 13-01-01 for January, 13-02-01 for Feb, etc.
I've tried parameter queries and vba codes from other threads but I can't get this to work.
I have a form called frmSearch with an option group called grpSearch ,a combobox called comboNyaba and subform called subform_CasesSearch has a checkbox called CaseClosed
The combobox filter the subform based on option group choice and value in textbox called NyID ... it works fine except that if the combobox is empty it give me error the code in main form i put it on Load and on current
Code: Private Sub Form_Load() With Me.subform_CasesSearch.Form If Me.grpSearch.Value = 1 Then .Filter = "NyID = " & Me.ComboNyaba
I have a form in datasheet view, with a date column. When I filter for last week it gives me all the entries for that week, but when I try and filter on a single day it only gives me 1 entry even though I know there are several entries for that day. Why would it be doing this? It also is the same when I go directly to the table and try to filter. I know the underlying data that was imported is a full date and time stamp, which I'm displaying as just the date portion, but surely it should show me all that are on a particular date, not just 1?
Just checked to see whether it would give me "yesterday", and while it seem to be able to when I checked 2 days ago, now it's not even giving me those.
I have a query where on an IIF result a field is displayed or an "OK"
I have an imported field of 6 chrs where I only want the left 5 so I use Loc:=Left([Location],5) ,
I then compare the result in, MoveTo: to another fixed field [PreferLoc]
MoveTo: IIf([Loc]=[PreferLoc],"OK",[PreferLoc])
I wish to citeria out all the "OK" values so I have <>"OK" in the critria section but when I try to run the query I am presented with a selection box asking for Loc This Query feeds a report so I set the filter to yes in the report properties and use [MoveTo]<>"OK" as the filter and this works great until I close and reopen the app where the filter has gone ? Can anyone advise where I am going wrong with my query and or my report ?
I am working on an ADP ( first time working with this ). I have a form that is based on a parametized query.
The record source for the form is the parametized query which works fine the first time it is brought up. When the user wants to change the client number, a button "change client" is clicked and the event that gets triggered is openform=("edit client")...... Well, instead of being prompted, I get the error "The ApplyFilter action contiains a filter name that cannot be applied".... When I do a right -click on that same button, and "remove filter "I can get my prompt, but I dont want to keep doing that. I am not sure how to remove the filter from this button. I am not sure what the error message is telling me. Thanks for your help.
I have created a runtime setup package for a friend to let her use my Access 2010 application, without having to purchase Access 2010. However, the ApplyFilter macro in one of the forms doesn't work in the runtime environment. The message suggested I use a SelectObject before ApplyFilter but that gave me another error.
How do I apply a filter that automatically loads when a form is opened? For example, I have a check box and I only want to load records where the box is checked.
I have an issue trying to apply a filter to a record-set. Here's the code:
Dim choice As String Dim rset1, rset2 As DAO.Recordset Dim dbs as DAO.Database Dim var As Variant
[code]...
Whenever the last line is executed, i.e. rset2=rset1.OpenRecordset, I get the following error message:<<<Too few parameters, Expected 2>.. It used to work before? Maybe an issue with my library?
I have a continuos form (list of records) with a tool bar with "filter by form buton". This buton allow to users filter the list of records showed by the form by diferent field criterias.
After applied a filter I need a buton in the tool bar to print the filtered records on a report with a specific design: logo company, header, footer, etc.
I don't know how to apply the same filter used by the form to a report. Notice the filter by form continuos change depending the user.
I have not too much experiencie in programming. So I appreciate in advance any help.
I am trying to create a form with control buttons on the form for all the letters of the alphabet. When a user clicks on the button for A, I would like them to only see records that starts with an "A". I assume that I should apply an event to the button's OnClick-property, with a filter, but I can't seem to get it right...any suggestions would be very much appreciated!
