I have a table called Neutron2015. I want the current date and time to complete when entries are made in two other fields. So I am looking for this date and time to populate in EXLStart when an entry is made in Processed By, and also the current date and time to appear in EXLEnd when an entry is made in Completed By with the bold word being the field names.
Is this possible, and how difficult is it?
I'm currently building my first database for a research project. When we enroll a participant, we need to have an enrollment date/time as well as an activation date/time (and they are not allowed to be the same because, rules). I was able to figure out how to auto-populate the current date/time when we've marked a person as enrolled. What I'm wondering is if it is also possible to auto-populate another field with the date/time, ten minutes in the future?
View 3 Replies View RelatedI have a form that contains a subform. On the main form, there are 3 fields: [IncidentNumber], [OpenDate] and [OpenTime]. The subform, [CtrlLog Detail] , contains the log entry details for each incident number. Every incident number can have many log entries. Two of the fields on the subform are [EntryDate] and [EntryTime]. The fields work correctly and the forms are fine.The issue Im having is when a new incident number is created the [OpenDate], [OpenTime] and [EntryDate], [EntryTime] MUST be equal because of some filter queries for statistics. Right now the user must physically type in the date/times in these 4 fields when they create a new incident number, which means I'm having lots of data entry errors.
Using default value on either [EntryDate] or [EntryTime] on the subform doesnt work because it doesnt create a primary key for the underlying table and the subform will not allow any other entry (due to some other linked values) until that PK is created. The forms are based on tables linked by [Activity_ID] as the primary key. I want to create some VBA code to see that if the Incident number is a new number (meaning the user must type in the new incident number creating the primary key for [Activity_ID]), that access will automatically populate the [EntryDate], [EntryTime] fields to match the [OpenDate], [OpenTime] fields on the main form. The user will manually populate the [OpenDate], [OpenTime].
If the number is an existing number (and the user is simply adding a log entry to the incident number) then I want [EntryDate], on the subform to default to the system date/time ([EntryTime] should remain blank for user entry) while keeping [OpenDate], [OpenTime] unchanged. When the [EntryDate], [EntryTime] fields are populated on creation of a new incident number, I want the PK for the underlying table ([Log_ID]) to be generated.
Hi. I tried to find out if this issue was already posted, but did not find. If anyone can help me, I am trying to auto populate two fields on a subform. The field I want to populate is the description of a role. So if the user selects the role name from the combo box, the description field will automatically update. Thanks.
View 14 Replies View RelatedI have a database that stores information for lab testing. Each time a tech does a "step" in the test process he logs it in the table, using an input form. There are different categories, for example preparation, testing, analysis, etc, and each of those steps take time. I have the form autopopulate the date and time with NOW() evertime the form is updated. What i want to do is calculate the time it takes to do each in days. I can easily get how many days it was from now since they logged the test, =NOW()-TestDateTime. What I want to do is get the number of days it took to do each step, ie the number of days between each event. Is there a way to do this?
View 3 Replies View RelatedI have made a database. I have gotten to the point where I use a form to get the information. I am trying to get the information to auto populate fields after using 3 drop menus. They are department name, shop and shift. All of the information comes out of tbl department name, tbl shop and tbl shift.
I also have a table with department name, shop, shift, line, employee total, shift leader total, ratio of shift leaders per line and total employees off. I am trying to figure out once use the 3 drop down how can I Auto populate the remaining fields. Also I am trying to figure out where and how to put in the code.
I am trying to add the current date and time into separate fields after an ID is entered.
Code:
Option Compare Database
Private Sub ID_AfterUpdate()
Me.Date_Received = Date()
Me.Time_Received = Format(Now(), "hh:mm AMPM")
End Sub
In my UpdateForm I have 3 fields. PartNumber, Description and SerialNumber. I use 2 tables for these. My MainTable and PartsList Table.
In my PartsList table I have the list of PartNumber in Column (0) and Description in column (1).
In my MainTable I have 4 fields: TransactionID (autoNumber), PartNumber(text), Description(text) and SerialNumber (text).
Now, In my UpdateForm I want the user to just select the PartNumber with a combo box (that also show the "Description" (I created this using the combo box wizard)). But I want to auto populate the field in my "Description" text box every time the user will enter new record and will also update my MainTable with all the values they entered in my UpdateForm.
I tried this codes in the after update of PartNumber combo box (properties):
Description = Partnumber.Column(1)
I tried also:
me.Description.value=me.PartNumber.column(1)
both codes unsuccessful.
How can I auto populate fields based on a payment term & amount?
example: client has 9 monthly payment of $150 term due every 15th of the month. (I would like it to be able to max out at 30 months)
So what I want to do is populate 9 monthly fields with dates and $150 payments fields next to it. Now, the payment fields even after auto populate, must be flexible in the sense for me to add a different amount just in case client makes an over payment that month too. In, addition I would like a check mark box to auto populate along if possible based on the 9 month term, this way I can manually check TRUE when payment is received in office.
I have created a basic Volunteer Events and Hours Volunteered tracking database.
I created a form Volunteer Hours to allow an end user to use that form to record the volunteer and hours volunteered on a specific Event. There are two tables needed in the form Volunteer Hours to be used for the end users to record the Event, Volunteer, Date and Hours. The form has drill down fields from two tables:
Table A - Volunteer Events (event name, date, descr, owner, co-owner, loc, status)
Table B - Volunteers (name, co, div, emp#,title)
I want to be able to select the Volunteer Event and have the event date automatically populate in the Volunteer Hours form date field when the Event is selected to eliminate the end user from having to enter the date in.
Also; I would like to be able to add more than one volunteer at a time to an event on the form, this would also decrease the data entry time.
Are one or both of these things possible?
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
View 8 Replies View RelatedI have a date/time field on a form that has the default set to "=now()" which puts in the system date and time. I need to change it so that the date changes to the next day any time after 11:00 PM (instead of midnight). This is because our third shift starts their day at 11:00. If they start entering data right away, alot of their work shows up on the wrong (to them anyway) workday date. I'm struggling with the expression builder to get this to work.
One way is changing the time to be an hour ahead but that will affect the entire day when I just want to change the date for one hour per day.
We have a form, which has a field linked to a "Recipients" table through a lookup. The field is bound to the recipient's name, but the lookup displays additional columns for user to identify the correct recipient in the case of duplicate names.
The "Payment" table's Recipient field only displays the recipient's name. So where duplicates occur, it's impossible to know which recipient is the correct one associated to a payment.
I would like to add an additional field to the "Payment" table called "RecipientIDNo". I need a way to auto-populate this field, based on the already existing Recipient field. Is this possible?
Why I just don't modify the recipient field on our payment form to be bound to the user ID number, there are two reasons.
(1) The field is linked to too many other reports and queries at this point. I believe it could cause an enormous amount of work to modify.
(2) the form likes to display whatever it is bound to. There may be a workaround for this, but I'm not aware of it and don't want the form displaying a number instead of a recipient name.
I am building an Access database for a client. It is an employee staffing database. With that being said they would like the ability to automatically populate the "T2PPCD" date field based on what is entered into the "Report Date" field. (Same table)
The date is the Monday after 180 days from the report date.
I already know how to get it to auto fill 180 days from the "Report Date" but I'm not sure how to tell it to give me the Monday after 180 days.
Looking to create two command buttons or two keystrokes sets in an Access 2007 form that will allow me to place a current date and time in any allowable field where the Cursor is presently placed. Similar to what was in Access 2000, ctl: (for the current date) and ctl shift : (for the current time).
View 2 Replies View RelatedI have a form with lots of combo boxes and text boxes. They are all linked to various MS Access tables and some of the fields are mandatory. I would like do an check to see if all the mandatory fields are not null i.e. are populated with a value and then run an update query for my master table in the database to flag the records as being complete if all the mandatory fields are populated.
If (IsEmpty(tab1.cmb_a)) Then do something
But I am just blank at the moment on how to proceed, especially on how I can do all the checks and then populate the database.
I am building a database to track contract of employees so that I can know which contracts are valid and which are expired.
My table has the following fields:
ID (Primary key)
Employee ID (Foreign key to link to the employee table)
Start_Date
End_Date
Status (Either valid or expired)
Challenge
I want when I enter the end date, the system checks the end date against the current date and fills in the status field with either valid or expired as appropriate. For instance if the contract end date is March 10,2016, the status must be filled in the word valid.
I am trying to auto populate a text box when i click on the button to add a new record. This is the code for the addnewsequence button.
Private Sub addnewsequence_Click()
On Error GoTo Err_addnewsequence_Click
DoCmd.GoToRecord , , acNewRec
Exit_addnewsequence_Click:
Exit Sub
Err_addnewsequence_Click:
MsgBox Err.Description
Resume Exit_addnewsequence_Click
End Sub
In this form is a text box called degree name that is link from the table degree. It autopopulates with the degree upon the sequence form first opening button clears the text box when i click add new sequence
any help greatly appreciated...
Thank you
In a form, I have a comboBox with 3 columns.I update the field and with this piece of code, I update two more fields based on this comboBox data/columns.
Code:
Me.EUR.Value = Me.Combo37.Column(2)
Me.USD.Value = Me.Combo37.Column(3)
I wonder if I can update fields which are not parts of a combo.For example, suppose I have a form with two fields, DATE and USD, Once I update the DATE field, this event, auto populates the USD exchange rate field.
Hi,
Im having a problem adding the date and time to a new record using a form. The 1st method i used was by inserting the default value set to Date() & Time() functions, this worked fine for over a year, but now on some computers on the network the following error pops up "function is not available in expressions in table-level validation expression".
The 2nd method I tried was to add a macro with 'setvalue' commands to the After Update event of one of the first field's that was entered, this entered the same information into the Time & Date field once the first field was updated. This now brings up the macro fault screen and the 'Halt' button has to be pressed to clear the error.
This only happens on the older computers that access the database, the new computers don't bring up any errors.
Can anyone help me with this problem??!
PTDAccess
I have a table called Jobslog which contains records for my permanent jobs I have to do for customers in one week.Structure is like:
JobID
TeamID
DayName
JobDescription
Instructions
Each job is assigned to a team, but is following same schedule every week.Can I create like a module or query to autopopulate the table with next week jobs, but putting the date as well, not only day name.For example, each Monday job should have a date field which should be 8/12/2014, Tuesday jobs should have 9/12/2014 and so on until Sunday.Usualy they are more jobs for each day (not day and job).
I'm creating a DB for tracking time. I have a form with a subform. The main form is the employee data, the subform is their time sheet. What I would like to do is when I enter the date on the subform the pay period number will auto populate in a text field. I have created a table with three columns - PK auto number, Date, and Pay Period Number. I created a relationship between that table and the time sheet table using the date. I don't know if that's right or not. I have read about auto populating from a combo box but that's not what I want.
View 4 Replies View RelatedIn my form I have a calculated field that works out the time elapsed for a job, worked out as the QTY/RUN RATE which gives me the time in hours. However I couldn't format the box as a date/time, as it is a calculation and the times may go over 24 Hours which results in the date/time giving me something like 31/12/1899 16:00 for example.
I've got around this now and I've formatted the results as HH:NN:SS using a public function in a module, but the problem is this is now stored as a text field. I've tried setting this to a number field but the formatting doesn't carry over. I've tried setting a custom format in the table as HH:NN:SS but then all I get is just a bunch of 0's, no calculation results.
So how to format this as a number field properly?
Also for any extra information:
- I know you're not supposed to store calculated results, but this is slightly different, the calculated field is a standalone text box and the bound field is a formatted text box.
- The reason I have to store the calculated results is because my boss wants to eventually see a chart of the total hours of jobs each day, hence why I'm asking if this can be done as a number field.
I have three tables with the following columns:
MoldReq
Mold_NoPart_NamePart_NoMaterialDateWork_Ord(Pri Key)
MoldLog
Log_IDMold_No(Pri Key)Part_NameLog_DateTime_InTime_OutHours
Molds
Mold_No(Pri Key)Part_NamePart_No
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code:
Private Sub cboCombo31_Change()
Me.txtPart_Name.Value = Me.cboMold_No.Column(3)
Me.txtPart_No.Value = Me.cboMold_No.Column(4)
End Sub
I have a database with date and time each stored in a separate field. Now I want to query the database based on a start date/time and an end date/time. I started with the code below but it only returns events within the same time range on each day when what I really need is every event from a specified date and time through a specified date and time.
SELECT myTable.ID AS myTable_ID, myDate, myTime, FirstName, LastName
FROM Staff INNER JOIN myTable ON
Staff.ID = myTable.StaffID
WHERE myTable.myDate >= #3/2/2014#
AND myTable.myDate <= #3/3/2014#
AND myTable.myTime >= #8:00PM#
AND myTable.myTime <= #11:00PM#
ORDER BY myDate desc
In the above example what I want is every event from 3/2/2014 8:00PM until 3/3/2014 11:00PM. But what I get instead is every event between 8:00PM and 11:00PM on 3/2/2014 and every event between 8:00PM and 11:00PM on 3/3/2014.
I would like a date field I have set up to auto populate the current date when I click on another field to enter information.. how would I do that?
View 5 Replies View Related