Forms :: Auto Populate Subform Based On Selection In Parent Form
Apr 30, 2015
I've got a Parent form (frmProspectDetails) with a subform linked (fsubProspectSkill).
This form is for users to enter general information on a prospect (names, position, height, weight, etc) on the parent form and skill levels on the subform.
Currently the subform is set so the user has to manually select the specific skill set for the prospects position, and then enter a value for each skill level(1-99).
I'm trying to get the subform to auto populate with a specific skill set based on the position selected in the parent form, so the user only needs to input the skill level without selecting each specific skill.
This data is then stored in a table (tblProspectSkill)
To add, I've created a form (frmPosition) that lists the specific skills set for each position.
I'm not sure how to get this subform (fsubProspectSkill) to auto populate with the specified skill set from frmPosition.
What I have is a form that takes in information regarding test data. Each test run can record data for multiple requirements. I am able to pull all data fine, however in order to make it easier on the user i was hoping to populate the requirements subform based on a selection of "test group" in the main form.
Commonly run together requirements can fall in to groups. I have a selection box for these groups in the main form and a table that stores these group id's and group setup. Is there a way to autofill the tables records that the subform is linked to based on the selected test group?
I have two tables: tblWeightTickets and tblWasteType.
I want to create a form: frmWeightTickets, where a user can enter information and the data is stored in tblWeightTickets.
There are two fields in particular that I am working on ... "WasteType" and "Rate".
On the form, I want "WasteType" to be a combobox "cboWasteType" and when I select a type of waste I want the "Rate" textbox on the same form to auto populate with the rate amount for that particular type of waste (i.e. recycling, garbage, etc).
The Rate amount is located in the table: tblWasteType under the field name "Rate". How can I do this and at the same time store the information in the tblWeightTickets? I already have the combo box loaded with the types of waste - I just need it to populate the rate text box and store it in the Weight Tickets table.
I'm creating a form that when the user selects the following categories in the same combo box (Date Received, Date Reviewed, Date kitted, In Work, Complete) it auto populates dates in the respective fields. As I mentioned, it's only one combo box. The dates will be spread out, so the user will change the combo box selection based on when these events occur. I already have a field for each category both on the table and form. Also, I do have multiple tables for other parts of data, but these categories all fall into the same table.
I am trying to build a form in the MoldReq section so when the user selects the mold number(combo box) it will auto populate the Part_Name and Part_No fields by pulling the data from the Molds table.
I have tried following this video where I create a change event:
Code: Private Sub cboCombo31_Change() Me.txtPart_Name.Value = Me.cboMold_No.Column(3) Me.txtPart_No.Value = Me.cboMold_No.Column(4) End Sub
I am trying to populate multiple text boxes from combo box using one table. First text box is getting populate on base of combo box value while 2nd text box is not getting populating.
I have used the following to populate the text boxes, even row count is correct, But why is not 2nd text box is not populating ?
=[Combo2].[Column](1) =[Combo2].[Column](2)
One thing I noted when I provide the control source then selection gets stop from combo box...I am giving the valid control source is customerID but its not working.Could it be the reason ? Why selection gets stop from combo box when provide the control source ? If remove the control source then 1st text box is getting filled on basis of combo selection and 2nd text box value is not getting filled as describe above.
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
I have a Customers table and an Orders table. My Customers table is a bit different than the norm because I couldn't figure out any other way to do this.
My client's customers are either businesses (companies) with a contact person, or individual customers. So, in the Customers table, I have the following fields (there are others but do not apply to my problem):
Customer ID Company Contact Customer
So, if it is a company the data entry person would enter the company name and the full name (EX: Doe, John) in the contact field, but if it is an individual customer, then they would leave Company and Contact blank and enter just the Customer name (Ex: Doe, Jane).
So, in the Orders table, I have combo boxes for look ups for the fields Company and Customer.
That works okay, but I would really like for the Customer ID to post into a text box once the Company or Customer has been selected. In other words, the input person would enter the name, then it would show that Customer's ID #.
I have an unbound combobox on a form that is used to filter the records of a subform based on who they have been assigned to. The combo box is based off of a query to the personnel table and utilizes a UNION querry to add the option "**ALL**" with a id number "111111" as the first option in the combo box.
In other words: the combo box has a list of names to choose from and the word "ALL" at the top as the first selection. The idea is that when "**ALL**" is selected, the subform should display all records regardless of who they have been assigned to. I'm trying to accomplish this with VBA. I've started developing the code to try to impliment this, however currently when "**ALL**" is selected, I'm getting a datatype missmatch that seems to be caused by my use of recordset.
I have a form with a subform in a navigation menu. Something like:
Navigation Form NavigationSubform ParentForm (header data and some unbound calculation fields) Subform (Multiple lines tied to query)
I have some fields in the ParentForm (i.e PF1, PF2) that would effect the values on the Subform (i.e. SF1, SF2). Also, there are some user editable values on the subform that will calculate the remaining fields on the subform (still using data from parentform).
My calculations work fine for the changes made on the subform. However I need to be able to calculate all the children lines on the subform when the form loads or a change is made to certain fields on the parentform. My On_Current event only wants to recalculate the first line.
Parent Form PF1=10 PF2=3 Subform QTY ADJ SF1 SF2 Line 1 5 .05 10.6 112.89 Line 2 8 .14 10.38 105.15 ... Line N SF1=PF1+(PF2/QTY) SF2=SF1*(SF1+ADJ)
So if PF1 or PF2 were changed then all the lines is subform would recalc SF1 and SF2. If changes were made to QTY or ADJ, then that line would recalc SF1 and SF2.
So, I have a form and I need it so that when one field is selescted, the other 2 auto fill based on my selection. The form is based off of a Table, "TblClient" and The fields are ClientID (PK), InventoryType, Policy, and DueDate.
I want the user to type in the ClientID, and then once they select InventoryType, Policy and DueDate are autofilled. I have another table, "TblData" that has the data for InventoryType and the coresponding Policy and DueDate associated with each one. So far, I have a combobox for InvnentoryType with a query for rowsource for InventoryType with the width of these additional columns to zero so they are not displayed in the combo. Then, I added unbound text boxes to my form (one for each additional field) and in the Control Source of those text boxes I put:
In the first unbound text box;
=[InventoyType].Column(2)
This worked for me, but now I realize that I want to give it the option that once these are autopopulated, they can be edited. For example, the policy most of the time is exactly the same for a certain inventory type, but sometimes, a word or two needs to be changed. Is this possible?
I want to create a text box within a form that automatically populates a contact number based on a selection from a combo box, also in the same form.
For example, I have a Bidders Table (tblTenders), this form includes information regarding the Tendor like the company name and a main contact within that company and a phone number for that contact.
I've created a separate table for all the contacts called tblContacts. This table holds all the contact information for each contact. I have a simple form called frmTenders that asks the user to input the Customer (which is the company who are bidding) and the Main Contact, which is a combo box to select the main contact from tblContacts. Below that combo box is a text box called 'Contact Number' - I want this box to display the contact number for the main contact automatically when a main contact is selected from the combo box.
The contact number text box isn't storing that information in any tables etc. It's just for viewing purposes when we need to make a call to that specific tender.
I have a form called frmPO based on a table called tblPO One of the fields in tblPO is linked to the field idAddress in the table tblAddresses
The following fields exist in both tblAddresses and tblPO Company Address1 Address2 City ZP State
The form contains controls for these fields on tblPO. I would like to give the user the choice to either enter a shipping address manually, or selecting a preregistered address from tblAdresses. For this I would like a combo box showing the values of idAddress. I f a user selects a preregistered shipping address, I would like the form to fill the rest of the fields based on the value of this control.
My understanding is that I should set a BeforeUpdate event to set the values of the different controls, unfortunately my command of VBA amounts to 0.
I have two forms - Main and StudentAdvisor (filtered by student ID#) SAdvisor.jpg
The main form originally had a combo box field to display advisor, the problem is that some students had multiple advisors during the course of their program. This problem was fixed by the creation of a StudentAdvisor (table/form) for recording ALL advisors. I set the form to display by newest term so the current advisor (or initial if no change) is the displayed record.
On the main form I then added "add" to open the StudentAdvisor form for entering information, and an unbound txtfield to display their current advisor (or initial advisor if no change).
The problem is I can not get the txtfield to display the information. I have managed to get the error ( #Name?)
Advisor Type 1=Initial, 2=Current, 3=Previous Changed 1=Yes, 2=N/A
so a record would record as: Initial and N/A Current and Yes Previous and Yes
I tried writing DLookup but could not get that to look up the combinations (above) and display either initial or current.
also tried pulling form SA = Advisor to form Main = txtAdvisor
For report purposes I need to know not only current advisor but how many were assigned during the program and also how many students each advisor was assigned during certain time frames.
How can I auto populate fields based on a payment term & amount?
example: client has 9 monthly payment of $150 term due every 15th of the month. (I would like it to be able to max out at 30 months)
So what I want to do is populate 9 monthly fields with dates and $150 payments fields next to it. Now, the payment fields even after auto populate, must be flexible in the sense for me to add a different amount just in case client makes an over payment that month too. In, addition I would like a check mark box to auto populate along if possible based on the 9 month term, this way I can manually check TRUE when payment is received in office.
In the detail of the parent form, there is a tab control block and each has subforms on them that are exactly alike for WorkOrder Notes, History, Specs When the Work Order subform is accessed (connected by SerialNumber, WorkOrderID and CertDate) the default WorkOrderID should default from the parent form, the SerialNumber should default from the parent form, and the CertDate should also default from the parent form.
What is the syntax to get these fields to default to the values parent form BUT not specifically referencing the name of the parent (because there are 5 differnt parent forms)?
Parent form/table, with a subform (separate table, 1:M link on "ID") The parent form data stays fairly constant (occasional change/update), with multiple entries in the subform for each parent record which are added to more frequently The master table has a field "last interaction" which I need to update whenever a new entry is made in the subform/subtable It updates fine when I change an entry in the parent table/form, but not when I add a new subentry for that parent
I have two subforms on a "Page"/Tabs. Subform #1 is a continuous form which accepts data about dimensions of a pattern piece. The other subform needs to update its information display each time the last control of the first subform loses focus, because it tells me how much material is required for all pieces of this pattern that are entered.
My first feeble attempt at this was to add the following code to the "Lost Focus" event of the final control on the first subform: Form.Parent.Refresh
This succeeded in forcing the second subform to re-run its calculation.
However, after the recalculation took place, I wasn't able to move to the next record on the first subform. This subform is a continuous form, and I need to be able to add another row of data and then see the second subform change based on the additional information in the first subform.
Greetings! This forum has been most helpful to a rusty Access user.
I'm creating a student group score entry form, having problems with creating the form I want. Say for example we have the following: 1. Three groups: A,B, and C. 2. Group A has 5 students, Group B has 3, and Group C has 20.
I want a form where I can select group A, and a list of the students will populate and enable me to enter scores for all of them on the same page. This will save time not having to re-enter the information for so many students. If anyone has a clue of what I'm talking about or is willing to lend me aid, I would appreciate it.
I have a Table (tblFPAData) that is being populated with entries from a form I created. There are several fields but if I can get an answer for one relationship then I can repeat it for the others.
In tblFPAData there are the fields MaterialNo and Description.
I am creating another table called tblSchedule and using a form to enter the information. I need the user to select the MaterialNo from a combo (cmbMaterialNo) and the then table auto populates the Description from tblFPAData.
Hello. I am trying to make an invoice sheet in Access 2000. My program consists a Order Sheet (frmOrder2), Delivery (frmDelivery) Sheet and a Invoice Sheet (frmInvoice). All three are linked by DoNo. The DoNo is made by frmOrder2.
I have a form that is called frmInvoice and a subform called subInvoice.
What I basically want to do is, to get the subform (subInvoice) to show records depending on the selection in the combobox DoNo in the main form.
subInvoice should show the Items, UnitPrice, Amount, TotalPrice, Remarks. These Items should show the records of frmOrder2.
I am kind of confused and totally lost, because I have no clue how to start! And I am quite a beginner so, bear with me! Thank you!
I have a parent form which has a yes/no checkbox in the form's record source. Then in that parent form I have a sub-form. If NO records exist in the sub-form I want the checkbox to be UN checked. If records DO exist in the sub-form, I want the checkbox to be CHECKED.
But I want this to happen as records are added or deleted from the sub-form. In other words, if the parent form is opened and no records exist in the subform then the checkbox should be unchecked. But as soon as the first record has been entered in the subform, the checkbox on the parent form should be checked. Likewise, as soon as the last record has been revoved from the sub-form, the checkbox on the parent form should be unchecked.
Can someone tell me how I migh find a record in a main form based a a selection in my subform?
I have a Main form called frm_ProductionSchedule.
It contains three subforms: frm_ProductionSchedule_subform frm_ProductionSchedule2_subform frm_ProductionSchedule3_subform
I would like to be able to select a record within any of the subforms and have the main form display it. The main form is linked to a SQL server Table. The subform are based on queries. The unique PK field is a date field called record_date.
I should add that the Link Child/Master fields are blank for all Subforms. Each Subform is linked to a query and displays data for a particular machine (1,2 or 3) AND is updated based on a combo selection of the Production week. The queries for one subform would look something like this:
I have an entry form for a table named [Group Members]. The form has several fields deriving data from 2 other tables [Mail List] and [Groups] I wish to automatically display a Group ID when the relevant Group Name is selected from a drop down list.The Row Source Code is as follows;
SELECT [GROUPS].[GROUPS ID}, [GROUPS].[GROUP NAME FROM GROUPS].
The Bound Column is 1.This code fails to display the [GROUPS ID] when a Group Name is entered. Which other controls do I need to modify to achieve this simple matter? I have similar code installed to achieve auto display of Member ID when Member Name is entered. That code is equally ineffective.
I have created two tables one for long term goals (tableA) and one for short term goals (tableB).Each table has its own PK but in tableB I store the PK of tableA for linking the two tables. The relationship is for each long term goal you can have many short term goals to achieve the long term. I have created a form that has the long term on a main form and the short term in a subform. and the linking of the ID's works correctly.
My problem is that on the main form I have another ID field (not a PK) that when I click a button to add additional long term goals I want the ID field copied and populated when the new data entry form is opened.The button is created with the wizard to add a new record.How can I copy the ID from the open form to the same field on the form when the new record button is clicked?
