Is there some kind of Time picker function , i can see the date picker however i am using a booking system and have a field named 'time of booking' and i need something that can dump the exact system/online time into the field.
View RepliesI have been tasked with creating a system for booking instructors with clients. Customers will book in for a lesson which can be anything from 30 mins to three hours long in half hour chunks. There are up to seven instructors available and I need to be able book up to six months in advance and hopefully display a daily screen with a grid showing who is booked out with who at various time of the day.
Can anyone suggest some piece of freeware or example database to get me started?
Many Thanks
Is there still a hotel/room booking system sample database available on the forum?
I remember seeing one a while back in the samples forum but can't find the thread now.
If it's not here anymore does anyone know of any samples I can look at?
Hi hope someone can help me out here,
I have been asked to research and then produce a simple seat booking system for a movie showing in a small lecture theatre using MS Access. I'm a relative Access newbie and have had little luck in finding information on how to go about producing this system.
If anyone could provide or link me to anything which could be of use that would be great.
Many Thanks,
Ross.
Hi,
I am going to do an online airline reservation system, and the database is going to be done using MS Access. The database contains 4 tables: Customers, Payments (Credit Card details), Booking, Flight.
Can someone help me do the relationships among the tables.
My personal e-mail is russcami@yahoo.com.
Thanks in advance.
Hi, here is the general schema:
tblCat, tblCustomer, tblPen, tblVisit, tblTreatment, tblCarePackage, tblEmployee
When a customer makes a booking, all I need to do is check that there is less than 20 cats in the cattery for every day of the customer's intended visit range. This isn't the same as a car-hire system where if a car is out for one day during the intended hire, then the booking can't be made - it doesn't matter which pen a cat is put into, as long as there is a pen free for each day of their visit.
i.e. a customer wants to hire a ford escort from 1st-10th january but it is already booked for the 9th onwards - the booking can't be made.
a customer wants to put their cat in ANY pen from the 1st - 10th so it just depends on ONE pen being free for every day of this visit.
Any suggestions? My teachers are hopeless and I need to have implemented my system by 20th January!!! :eek: Thanks, Jayce
So I'm trying to do this database for my ICT coursework and its a full system for dog kennels.
So in actuality the rooms are kennels.
I have a table tblbookings that amongst others has fields:
Kennel No
Date In
Date Out
I need a way of users entering the requested dates for a new booking and getting an output of a list of all kennels that are available to book for that full date range or even better, a way of running this straight from the form for a new booking frmbookings to just leave the first available kennel no. in the field KennelNo?
so i created a system to have events booked, and i am trying to check time availability of the event room available, but i dont know what wrong. it either my query or vba code. i have attached the attachment,
View 5 Replies View RelatedI want to let the user to select the date and time by showing a control/screen fot this. I used the MS access control: Microsoft Date and Time Picker Control 6.0. however, this doesnt show the date properly.
Is there any Fully Free software that I can use to show a screen to allow the user to pick the date and time?
Thanks,
Hi
I'm using the activeX control Date and Time Picker which work fine. I'm having trouble though to set the MaxDate and MinDate from VBA.
For instance me.DateTimepicker12.MaxDate="01.01.2008" returns an error 'Invalid date......'.
I have tried many different formats for the date, but not the right one.
Is there someone who can shed some light on this?
Thanks in advance
Here is what i need help with i have the basic lay out but i just need someone to help me figure out the rest of this. Attached is a sample database with what i am trying to do. if someone would be so kind to help me figure this out that would be great.
thanks
chad
in access xp, there was a handy active x DTP. it doesn't seem to be available in access 2003. is calendar control 11 there only option here?? it really isn't as convenient as the DTP. maybe there's a way I can make the calendar control operate in a similar way to the DTP?? or maybe there is a DTP but its called another name in the active x list.
any ideas are appreciated.
Hi
I am using the Date Time Picker in MS Access. When I transfer my database to another computer the control shows as a blank white box. I have already done
regsvr32 to register the relevant ocx and ticked the Microsoft Windows Common Controls -2 6.0 (SP6) in the reference box. Is there any other way to repair
this control without having to reinstall the whole thing.
Thanks - Rob
Hi All,
I know there are several examples of calendar date and time pickers about so I thought I would offer mine up for critique.
No modules, very little code, code used is simple and can be called from subforms as well as forms.
I used these forms in an application where the users find filling in date and times in the correct format difficult with limited keyboard skills.
If it can be improved let me know..... :)
Garry
PS I think the contributions Banana has been making to this forum are invaluable.
Keep up the good work.
How do I change the ms date/time picker control 6 to have a default null
value?
I can make the DATE picker work, but I need to add the TIME to the same picker. At least that would be preferred.
View 6 Replies View RelatedHi all
This isn't the standard problem with DTPickers & Tab to which I've found lots of references!
I have a form with a Tab control, each page of which has a subform on it. There are several MS Date & Time Picker (6.0) controls on each tab. My problem is this: whenever you change tab when one of these DTPickers has the focus, you then can't type text (into a text or combo box, for instance) on the new tab until you have been into and out of another DTPicker control! (The KeyPress etc events do get triggered though). Once you've selected a DTPicker, you can then select another control and type text in OK.
The forms/controls aren't bound if that's relevant. It may be that the problem is caused by moving between subforms rather than between tabs.
Has anyone else had trouble with this? Is it a bug or expected behaviour (though I can't see why it would be)?
And most importantly, how can I get around it? Hope someone can help.
Dave
Hi
I use the Date and Time Picker. i know that i can get many other calendars, however, my theory is that i would rather use something that is directly supported by microsoft. but as i found out now that may not be the case.
on of my users updated his Office 2003 after he was having problems using my database (created on 2002 sp3). i know that the same database works on 2003 sp1. however, now microsoft is serving 2003 sp2. so after the update he he can't use the database.
so my questions:
1. how do i generally prevent users from getting update errors. i would like to atleast alert them with a meaningful message that their version of Office needs to be updated.
2. is this true that the Date and Time Picker doesn't work anymore? and if so, why isn't backwards compatible? and how do i prevent this from happening with other controls or scripts?
thanks,
sam
I have a problem in the copyfile function. It says "CompileError - Expected =" and I am not sure if I am even setting this correctly. This is my code:
Dim fso As Object
Set fso = VBA.CreateObject(filesystemobject)
fso.copyfile(me.txtPath,me.txtarchivepath & me.txtnewfile)
I think the problem is the "filesystemobject bit in the code ....
Hello,
I have a form that displays the system date and time for every entry.
When the data gets stored in the table, the date and time do not get stored. How can i save the date and time with all the other information.
Also, everyday when i open the form, it shows me all the data from the previous day but the date for all that data has changed to taday.
I want that everyday when i open the form, it should be blank and all data from the previous day must be stored in the table along with the date and time.
Hope someone can help me with this
Thanks
I have a time tracking system where users can clock in and clock out. I want to have an error message when they clock in and then accidently clock in again. Therefore, they can only clock out after they have clocked in. The data goes into the table called "Timeclock Table". The fields in that table are SSN, Clock-In, Clock-Out, and TimeStamp. the clock in and clock out are check boxes. can you guys help me??????
View 1 Replies View RelatedHey all,
I'm trying to find a solution to a problem. Is there any way using VBA to generate a random number, based off the current system date and time? The theory is that a random number seeded by the system date/time will be truly unique and the possiblity of it ever occuring again will be nearly nil.
Or is there a better way to create unique ID's (such as member ID's, or something similiar) based off the system date/time that can be used as a primary key in a relational db.
I need to develope a system that will allow for employees to login and imput their "time card". I found one post on here about something similar, but it didn't give much info. I am very very new to Access so please give info in simple terms or very well explained. I am hoping that I can have a login and password so employees can't access eachothers time card. All it will need to track is
Date
Type of work
Hours
Rate
Comments
I am hoping that this is going to be an easy task, but I need some help. Anyone have any ideas or directions... or even better know where I could just download a template.
Thanks,
Chrissy
I need a query run that brings up a list of customers that need maintence after 6 months after their last maintence service. As soon as you open the DB, the event/query runs and if there are any customers past due to display them. And if there are none, to not even show the query at all.
I have very little experience with timers and if/then statements and don't know how to set this up.
Any help would be greatly appreciated. Thanks in advance.
I have an Access 2010 application running on Win 7 Pro which connects to a Back End SQL Server database. I am trying to get Access to synchronise the client pc system date & time with the Sql server date and time. Please note, the date/time does not necessarily have to be correct, it just has to be consistent between the server and all the pcs running the Access application.
I have tried two methods as follows. But both only work if Access with Administrator privileges, which isn't really practical.
Method 1:
Code:
Dim MyDateTime As Date
'Some Code here to get MyDateTime
If MsgBox("Change date & time to:" & vbCrLf & vbCrLf & MyDateTime & "?", vbYesNo, "Change") = vbYes Then
Date = DateValue(MyDateTime)
Time = TimeValue(MyDateTime)
End If
Method 2:
Code:
Private Type SYSTEMTIME
wYear As Integer
wMonth As Integer
wDayOfWeek As Integer
wDay As Integer
[Code] .....
Access 2007 - Win7
I have two textboxes in my form bounded respectively to check-in and check-out dates of my Hotel_Bookings table
When a user enters the check-in date, I'd like the date-picker of the check-out date to display the same month of the check-in date instead of the current month.
I know that the built-in date picker cannot be manipulated. I cannot work on check-out default value because it will not be updated on the current record.
The only way that I've found until now is to set the check out value to check in + [some days] but I do not like it because it could generate data entry mistakes
How can I solve? If there is no way to get the job done with the built-in date picker, what kind of ActiveX control could I use instead? And where to find it?