Forms :: Button Activate Yes / No Question To Continue Commands
May 2, 2013
I have a button on my form, that runs a series of queries then closes the form. It works great!!
How can I get the MsgBox feature to continue with all commands or cancel and close the form?
Here is my code without message box action
Private Sub AcceptChanges_Click()
DoCmd.SetWarnings False
Forms!SelectCustomerNewCustomerF!MergedRecordsF!CustomerID = Me.SecondID
Forms!SelectCustomerNewCustomerF!MergedRecordsF!MergedTo = Me.IDprimary
Forms!SelectPrimaryNewCustomerF!MergedRecordsF!UserID = Me.UserIdChange
DoEvents
[Code] ....
All of these actions work great, and do not need to be modified. it is just a msg box button to continue or cancel and close the form.
View Replies
ADVERTISEMENT
Mar 21, 2015
I have two forms one simple and another sub form located in simple form and connected to query where query has parameters, while opening the simple form the sub form require the parameter values. Question is here how I can make the sub form like when I open the simple form the sub form must be disabled (not request me for parameter values) and make a button in simple form to activate the sub form and then request me the parameter values.
View 1 Replies
View Related
Nov 30, 2013
I wish to create a forms that has command button which display a drop down list. The drop down list should contain commands for reports and forms.
Lets assume we have forms named FrmStock, FrmSales and we also have Reports named RptUserLog , RptTurnover.
View 3 Replies
View Related
Sep 3, 2013
I have made a contact form where particular member credentials are coming in text boxes, i have kept a combo box also on the top to view by the phone number, if the phone number is entered the credential of the member comes, and also the navigation buttons that is first, previous, next and last.
The main problem if i select phone number by combo box on the top, the navigation button do not continue from that part, even if i press next or previous it shows no records found.
View 13 Replies
View Related
Feb 23, 2006
Per the instructions detailed here...
http://www.fontstuff.com/access/acctut08.htm
...I created a parameter query in the form of a drop down box that uses a
command button to produce a query.
The code is as follows:
Private Sub cmdCreateReport_Click()
DoCmd.OpenQuery "qryUIRFollowUp", acViewNormal, acEdit
DoCmd.Close acForm, "frmOpenUIRLookUp"
End Sub
This produces the data I need in datasheet view. I want to use this same
data to populate a form I've created that will use the above data as a
springboard to add more data to another table (also connected to my form).
So what code do I need to add to the above so that along with producing the
data the command jumps right to the next step and feeds this data
into the form and then displays that form?
Thanks for the help,
David
View 4 Replies
View Related
Oct 11, 2004
I have created a query that has the info for a quick search. What I want to do is create a form that I type the last name of my customer and then click a button that opens the query and filters out all records that don't match the criteria I enter. I want the button on the form to do both. Is thie possible? If so how? Please Help. Very much appreciated
Biz
View 3 Replies
View Related
Jul 25, 2013
I want to run multiple SQL commands on click of a button. I have these three command,
CurrentDb.Execute "INSERT INTO UserMadeDeviceT(Product, ORESector) " & _
" VALUES ('" & Me.D_NewDeviceTxt & "', '" & Me.D_ORECmb & "')"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (RatedKilowattPower, KilogramWeight)" & _
" SELECT RatedKilowattPower, Weight FROM UserSelectedComponentT " & _
" WHERE [TotalComponent] = '" & D_ComponentNameCmb & "'"
CurrentDb.Execute "INSERT INTO UserMadeDeviceT (Cost) SELECT SUM (EuroCost) FROM UserSelectedComponentT"
all of these work indevidually and return the correct value but the add three rows to the table. How can I combine these three commands into one so that it will only add one entry?
View 8 Replies
View Related
Feb 25, 2014
I have a sub form that hase multiple records. What I would like to do is if my catagory field = "(1) Constrution" the deactivate 'DC to Apply', got that to work BUT it does it for all of the record..Notice in the pic that the first record = "(1) Constrution" and id deactivates ALL of the "DC to Apply"
Here is my code
Private Sub Category_AfterUpdate()
If Me.Catagory = "(1) Construction" Then
Me.DC_to_Apply.Enabled = False
Else
[code]....
View 14 Replies
View Related
Aug 18, 2014
I have a main form that holds a tab control with a number of sub forms. One of these subforms has a pop up form for adding new records to it. After closing this pop up form I would like to initate code on the sub form where the new record now will appear. One of the things I like to do is simply to set focus to the record the user just added.
My problem is that I cannot seem to get any event to trigger in this setting (bben trying more or less all). If I understand things right the fact that I am using a pop up form and the fact that I am using a tab control both seem to interfer with the Activate event and making it passive.
How I can trigger code on the sub form (after closing the "Add New" pop up form)?
View 6 Replies
View Related
Sep 23, 2004
Does anyone have a source that lists basic Access (2000) commands. I have training in SQL server (so I am just starting out) but I am working with Access and the commands aren't always the same and the help files in Access aren't much help.
My immediate need is to find the equivelant of the go command. I am trying to build one query with multiple update statements.
View 2 Replies
View Related
May 2, 2014
tell me that can we use functional keys F1, F2,F3,,,,,,,,,,,,,,F12 in ms access to perform commands like saving a form data , for closing form refreshing form, clear form.Or is there any way to make shortcut keys combination like[(ctrl+s)(ctrl+c) (ctrl+A)] in access to perform action like saving,closing,clearing, current form.
View 1 Replies
View Related
Mar 25, 2013
When entering information into a blank form, I would like to be able to continue entering information to another additional blank form after my last entry. Is there a way to continue to a blank form after entering information into the previous blank form? I would just like to continue without having to close the entire form and then reopening another form.
View 7 Replies
View Related
Feb 27, 2006
I have an button on my form that exports the database to the A Drive. The[problem is that if the user hasn't put a disk in then an error is produced. I would like to create a message box saying 'Ensure that you have placed a disk in the A:/ Drive' then with a continue ox under it. I assume it needs some error handling with it as well, but I dont know how to do it. Anyone know?
View 2 Replies
View Related
Sep 28, 2006
i won't go into details except i am doing databases for cemeteries - very complicated
example
i have come across two people who have the same name, date of death, buried in the same grave on the same day but are not related and must have seperate records!!
my main table has 6 primary keys. [even then i have 2 duplicates who are not related]
anyway one of the problems is this
i have a main form with 2 subforms. the main form is unbounded. i need to copy information from 1 of 4 queries run by the main form [QBF] to one of the subforms. i don't know which query untill i view the data.
when i know which one, i press a command button which copies the information to one of the subforms. when i repeat the actions above instead on the new query data going into a new record on the subform it overwrites the existing data instead of pasting it into a new record.
i have tried setfocus command - this works only if i click on the subform and activate it [this defeats the object of the command as i might just as well click in a new record box on the subform].
in essence i do not need to activate this subform at all. i just need to check if a record exists and if it does goto a new record [again this works only if i physically click on the form]
any ideas how i can force the cursor to goto a new record without physically clicking on the subform??
thanks
View 6 Replies
View Related
Dec 3, 2007
I want to edit a report i Access. How do I activate the Field list so I can choose fields to insert into my report? It is gray.
View 3 Replies
View Related
Aug 3, 2007
I adapted the findform from the address book sample database. After the search is performed I would like it to be able to continue to browse (continue scrolling through) the rest of contacts rather than excluding everything but matches. More like a go to kind of search rather than a select query. I'm betting this is a simple fix (I hope), I just don't know what it would be. Any help?
View 1 Replies
View Related
Nov 18, 2013
this is a progress bar, what i need is, while execute loop (progress bar) but also execute next command = "LedgerExe:
On Error GoTo Proc_Err
Dim inti As Integer
Dim dblPct As Double
[Code]....
View 1 Replies
View Related
Jun 21, 2014
how to get the "Debts Continue from" value in a Access Query
I only need to get the answer the name of the month or count of Months Debts finally continue from.
Supplier No
Name
April
May
June
July
Debts Continue from
1
Alan
-50
0
0
-1000
July or 1
2
John
-100
-105
-115
-120
April or 4
3
Perera
-15
0
-20
-25
June or 2
View 5 Replies
View Related
Nov 23, 2005
Hi, im working on my school project for A2.
When the user clicks on say; the customer ID dropdown menu, i want the label text on the right of it to get darker (make it more visible). How can i do this?
(i have attached a picture of my form)
thanks, Robin
View 2 Replies
View Related
Sep 16, 2014
I have a Child Report with underlaying records from a SELECT DISTINCT.
I prints records of prices, I need to show "some_text" if the price is "0".
Which event should I use?
I tried ChildReport On_Activate but could not pull it off.
View 2 Replies
View Related
Jul 21, 2015
Access 2007, Sql Server 2008 R2. Problem with refresh.
Form 1, (Single Form) Parent Form, contains Property Year Detail data. PK = PropYrDetID. This is a SINGLE FORM
Form 2, (Single Form) Child form, contains land square footage data from multiple records. PK = SPYDID FK = PropYrDetID. This is a SINGLE FORM.
The code below executes every time Form 1 opens, activates or whatever. The reason is that data in Form 2 changes frequently. Thus every time Form 1 opens the end user will see the latest data.
"Form 1" receives a series of values that it obtains from VBA code that runs when it opens or activates.
"Form 2" has the data being summarized in Form 1.
All of the code and queries below run fine and return the correct values from Form 2 to Form 1. My problem is Refresh on Form 1.
I've tried the code in the On Current, On Activate, On Load of Form 1. Mostly the data shows up in Form 1. Other times parts of the data are left out. I have to hit F5 or close and reopen the form, and then the data appears. When I don't see data on Form 1, I check the underlying table and the correct data exists. I don't know how to achieve a 100% refresh success. I have tried me.refresh and different Events all over the place.
All of the code below runs when Form 1 opens. Queries are fine, Equations are fine, Tests run fine. It's the results showing up that I am having the problem with.
I don't think the issue is with the code but with the Refresh. Here it is for your review.
The term "Equations" is the customers. There are 5 equations. Some have a series of tests after the Equation to determine the result.
Code:
Private Sub Form_Activate()
Dim rs As Variant
Dim varAOProp As Variant
Dim varAOIni As Variant
Dim varAOCert As Variant
Dim varBORIni As Variant
Dim varBORFinal As Variant
[Code] ....
View 5 Replies
View Related
Aug 2, 2014
I am trying to check for certain user levels then if criteria is met it will ask to continue then clear a table..
Code:
Private Sub Command9_Click()
If strSecLvl = dev Or admin Or sprvsr Then
If MsgBox("Do you wish to clear the logs?", vbYesNo, "Clear Logs") = vbYes Then
DoCmd.SetWarnings False
DoCmd.RunSQL "Delete * from tblLogs"
[Code] ....
View 2 Replies
View Related
Jan 26, 2007
Hi Folks.
I'm having a problem with ODBC in Access.
For some unknown reason, when I click Get External Data > Link Tables
the ODBC Dialog box doesn't appear.
I have reinstalled Access and ODBC from the MDAC.
Still the ODBC dialog will not appear.
The funny thing is that existing links to my SQL Server database open fine and display the data.
Has anyone experienced this issue and what was the fix.
Thanks.
View 8 Replies
View Related
Sep 12, 2013
I have manipulated the duplicate record code found online to suit my purposes. It works for all the other subforms, however this subform has too many fields so the code goes onto the next line. How do I solve this? Online it says using "& _ " but I can't get it to work. There's basically too many fields to fit on one line so I need to continue the code onto the next line
Code with end of line problems highlighted in red:
If Me.[subformEmissionsControlTarget].Form.RecordsetClone.RecordCount > 0 Then
strSql = "INSERT INTO tblEmissionsControlTarget ( System_ID_No, EmissionsStandard, OtherEmissionsStandard, IntakeThrottle, OBDrequired, OBDVersion, DPFregenmethod, ExhaustTemperature, EGRTemperatures, EGRRates, SteadyStateCycle, SteadyStateEngineeringLimitType, SteadyStateLegislativeLimitSmoke,
[Code] ....
View 2 Replies
View Related
Jul 23, 2015
I am using Access 2007 & trying to update a database to include a check & balance.
Currently a user enters their name into a form, selects a check box (Pass or Fail) & clicks a save button. Real simple form. The actual testing is performed on a standalone piece of equipment separate or outside of the MS Access database.
Here is the challenge, if someone does select Fail, I want to ensure this person comes back into a blank form (new entry) & confirms they have eventually passed. I want to give a time limit of 10 minutes before an email is sent out to their superiors. (I have the email portion figured out already).
Other entries will take place before the failed user comes back to the entry form so the form needs to be available for other people to enter their results.
I believe this can be done using some VBA and a query but I am not sure where to start especially with the 10 minute allowance to recheck the test status.
View 8 Replies
View Related
Aug 13, 2013
Counting number of appearing records show in query
Name Drinks Date purchased Count
John Milk 8/3/13 1
->Mike Beer 8/4/13 2
John Beer 8/4/13 1
Peter Wine 8/6/13 1
-> Mike Beer 8/6/13 2
Counting conditions: counting will continue if NAME and DRINKS are the same
View 2 Replies
View Related