Forms :: Button In Popup Form - Set Focus To Another Form?
Jan 28, 2015How can I make a button in a pop-up form to send enter key to a text box in another form? Do I need to set focus to the other form first? And how?
View Replies
ADVERTISEMENT
Forms :: Requery Form And Subform After Popup Form Close
Aug 19, 2013I tried all sorts of permutations of the requery command but apparently I'm too dense to figure it out.
Form 1
subform 1 > button to open pop up form
subform 2
subform 3
I'm trying to requery a combo box (inside of subform 1) based on a table that is updated from the pop up form.
On pop up form close, what's the correct syntax for re-querying subform 1?
Forms :: Setting Focus To Control On Single Form Side Of Split Form
Jun 24, 2013When I right click a row on the data sheet side of a split form an select "New Record" I want the curser to go to the first field on the single record side. I've placed this in the OnCurrent but it did no good.
Code:
If Me.NewRecord Then
Me!Descrfiption.SetFocus.
End If
Any way to set the focus to the single form Side of a split form?
Forms :: Pre-populate Popup Form After Update To Another Form
Aug 27, 2013I have two tables - Interviews & Placements.these tables have multiple foreign keys which pull information from other tables (CandidateID,ClientID etc). I have designed queries and forms (datasheet view) which display all the values that I need, For example:
The interview form shows the following fields:
CandidateName;Company;consultant;1stInterviewDate; 2ndInterviewDate;Offer;Accepted
the placements form shows the following fields:
PlacedCandidate;Company;Consultant;PlacementDate;F ee;
This query "qry_Interviews" populates these forms using the foreign keys:
CandidateID from candidates table
CompanyID from companies table
consultant from consultants table
Ideally what I'd like to happen, is when the "accepted" field is updated on the interviews form, the placements form opens as a pop up and is auto populated with the values (CandidateName;Company & consultant).So far I have tried setting the value directly, i.e on the "on Open" event of the Placements form I entered:
Me.Txtcontactname = Forms!ISISnavigationMain!navigationSubform.Form!DS .Name
This does not work. Should I be populating the placements form with the actual Foreign key values rather than the resolved names? Ideally I'd want the pop up placements form to display the actual names rather than just ID numbers.
Forms :: How To Capture SSN From First Form To Use As Focus For Second Form
Jul 22, 2013I have two forms that have a unique field (SSN).As I'm working in one form, I want to be able to pull up the other form (which isn't a problem). On the second form pulled up, I want the record to match the first form (SSN) - this is the problem.
I believe SetFocus is what I need to use but I don't know how to capture the SSN from the first form to use as the focus for the second form.
Forms :: Set Focus To Sub Form?
Sep 14, 2014On a main form I have 2 sub forms. On the main form I have a command button that asks how many guests in a booking and depending on the response populates the subform with Guest Names. However it will only do this if I click on the subform and then click the command button.
I want to include some code that sits behind the command button on the main form that will duplicate the otherwise manual selecting of the sub form. And I am thinking this is a SetFocus procedure.
I have tried this code;
[Forms]![Booking].[SubForm1].SetFocus
where Booking is the name of the form. I do not know whether the Subform is #1
Forms :: Display Value Of Control Within Popup Form
Jul 25, 2013I have a main form bound to a query. Within that form, I have a button which calls up another form (pop up form). I simply want value of the "claim#" field-control to display in the "claim#" field-control of the pop-up form.
View 4 Replies View RelatedForms :: Size Of Modal Popup Form
Aug 27, 2014I am having issues with a split form which modal and emergent (pop-up) properties are set to yes. When I open it, it is maximized or out of the size I had setup; although I saved it trying to "freeze" the height and width.
View 11 Replies View RelatedForms :: Filter A Popup Form With Subform?
Jul 29, 2015I have a continuous Form [Letter Log - All] with "LetterNo" field as the primary key. What i want to do is click the "LetterNo" and a filtered pop up form with subform should appear based on what has been clicked. But i don't have luck doing that. The name of the main form is "LetterLog" and its subform control name is "LetterLogSub"
here is what i did.
Code:
Private Sub LetterNo_Click()
'DoCmd.OpenForm "LetterLogSub", acNormal, , "LetterNo = " & Me.LetterNo, acFormEdit, acDialog <-- this one works but without the subform
'DoCmd.OpenForm "LetterLog", acNormal, , "Forms!LetterLog!LeteterLogSub.Form.LetterNo = " & Me.LetterNo, acFormEdit, acDialog
'DoCmd.OpenForm "LetterLog", acNormal, "LetterNo", "me.LetterLogSub.Form!LetterNo = " & Me.LetterNo, acFormReadOnly, acDialog
DoCmd.OpenForm "LetterLog", acNormal, "LetterNoFilter", "Forms!LetterLog!LetterLogSub.form!LetterNo = " & Me.LetterNo, acFormEdit, acDialog
End Sub
Forms :: Change A Subform To A Popup Form
Sep 24, 2013I had a subform to enter payments. It worked well. The master and child fields linked well and all the necessary data appended to a new record in the payments table.
Now to make it more user friendly, I changed the subform to a popup form (The 2 forms took up too much real estate on the screen).I deleted the payments subform and created a command button to open the payments form as a popup.
I need 3 fields on the payments form to be populated from the edit sponsor form (sponsorID, MemberID, SponsorTypeID) and then payment details to be entered and posted to a new record in the payments table.Since I've changed the payment form from a subform to a popup form, the master/child relationships are gone and the 3 fields I need for the payment record no longer appear.
Forms :: Adding New Record Using Popup Form?
Oct 25, 2013I'm working on a database that has a subform which pulls its data from a table and I'm trying to use a popup form to enter the data in the sub form. For example the table is called student debts. The form is called student debt. The pop up form is called student debt entry from. I want the inform that's in the student debt entry form to be recorded in the student debt form which is a subform on the main form. I know i have to create a add new records button to do it but not sure of the code.
View 4 Replies View RelatedForms :: Button In Form To Open Different Form And Chose A Customer Based On Last Form
Mar 26, 2013Basically I have a Customer Form, which I have a New party button on it,this button opens up the party form to a new party, what I would like it to do is open up a new party but make the new party for the customer I had selected in the previous form.I have tried the GoTo macro's but cannot seem to get it to work.
I am thinking on clicking the button it will need to get the Customer ID, and then open the party form, create new party, and paste in the Customer ID, which then updates the Name - Date - Address - Company Fields.
Forms :: Saving A Record And Closing A Popup Form
Jun 15, 2014I have a popup called by a subform to add a new record or edit a selected record. I keep getting "Runtime error 32502". The value you entered isn't valid for the field "|"
I have no required fields and all the drop down related fields have the right value type in them (That I can find)The only "|" reference I can find is in the OpenArgs content below when I load the form. If I'm adding a new record I pass two fileds via the OpenArgs
Private Sub Command52_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", , , , acFormAdd, OpenArgs:=Me![DebtorId] & "|" & Me![MatterId]
End Sub
or if I'm modifying a record from the subform on click I
Private Sub Text38_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", acNormal, , "[Transactions].[TransId] = " & Me.TransId, acFormEdit
End Sub
Below is the Popup Load code
Private Sub Form_Load()
If Me.DataEntry = True Then
Me.VariableHeading = "Add A Debtor Payment"
[code]....
Forms :: Popup Form Updating Incomplete Records
Jan 21, 2014I have a popup form that user will select for updating 4 fields in table. I have a update button that has code behind it that verifies the record is complete before closing the popup form. That works well.
However, I want to add an abort button that will close the form and save nothing entered however, I getting incomplete records and blank records. How can I code the button to not update the table and just close the form?
Forms :: Cannot Get Edit Access In Popup (Confirmation) Form
Jul 7, 2014I am designing a transactions database for some of my clerical staff. I've inserted a data entry subform into the main transactions form (which also has a subform that summarizes all the selected company's past transactions). This data entry subform actually has as it's record source a table that simply stores that one record temporarily.
So when the user is finished entering their current transaction, I have a Save button that actually just opens a popup form which displays the data they entered into the data entry subform, giving them a chance to verify their entry is accurate. This form has a Save button which runs an append query and a delete query, adding the record to the permanent Transacations table and also clearing the temp table.
The problem I have, I think, is that when the popup form opens, the main form data entry subform still has that record locked as exclusive. I believe this is the case because while I am indeed able to make changes to the fields on the popup form, none of these changes appear in the temp table. In other words, the user is not actually able to use the confirmation pop up form to make any necessary edits to their entry. This makes the form sort of useless!
Forms :: Field Focus In Modal Form
Dec 29, 2014How do you set the focus on the first field in a modal form when it opens?
View 3 Replies View RelatedForms :: Setting Form Focus Properly?
Jul 10, 2014I have a Main Form with a tab control. On each of the six tabs is a SubForm that takes up the entire tab. So basically I have a tabbed interface for my forms, just with a bit more control over the layout than if I just opened the forms separately in the Access window.
Anyway, on one of those subforms is a button. When you click it, it opens a separate form in a pop-up window, which is used to find a specific record. Once that record is found, you can click another button, and the idea is that this pop-up window closes, and you return to the underlying form, which jumps to the record you selected.
So far so good. Now, if I am working on my program in Access, and I open that subform's source form separately in its own tab, click the icon to open the record finding form, find a record, and then click the button to load that record, the following code runs, and it runs flawlessly - closing the pop-up window, and passing the information back to the main form which displays the proper record:
Quote:
Private Sub ViewRecord_Click()
Dim RecordID As Integer
RecordID = Me.ID
DoCmd.OpenForm "CDLExam", , , "ID = " & RecordID
DoCmd.Close acForm, "CDLExamCONT", acSaveNo
End Sub
Where my program falls apart is that, in actual use, this form is not open on its own. It's open as a subform on one tab of a tab control on a Main Form. So the third line of code falls apart. Access thinks I want to open CDLExam separately, but it can't because it's already open in the subform, so instead I just end up back at the main window like I want, but the form fails to move to the proper record. Basically, line 3 just doesn't do anything.
How can I make this work? I tried replacing "CDLExam" with the name of the main window, but then it tries to move to the record in the main window, which throws an error as the main window doesn't even have a record source attached to it.
how to refer to the SUBFORM which has CDLExam open, and tell THAT to move to the proper record.
Forms :: Popup Image On Rollover On Button Or Label
Feb 24, 2015I was wondering if there is any way i can popup image on rollover on button or label. if yes, how to do it.
View 2 Replies View RelatedForms :: Tabbing And Setting Focus On A Button?
Oct 21, 2013I have a form with a tab control on it. The input for respective fields are placed inside the tab control, and I have the "Confirm" button placed outside, on the main form. Now I wanted to be able to navigate my focus from a control from inside to tab control, out to the Confirm button on the form, to allow smooth flowing data entry.
However, it seems like Access separates the tab indexes for the controls in the tab control and outside on the main form, so setting tab index does not work. I tried using the code ON LOST FOCUS and SET FOCUS;
Private Sub txtPurchaseNote_LostFocus()
Forms![frm Imported]![cmdConfirmPurchase].SetFocus
End Sub
But then a dialog box appears:
Run-time error '2110'
Microsoft access can't move focus to the control cmdConfirmPurchase
(cmdConfirmPurchase is a button control)
Forms :: Set Focus To Text Box Once Button Is Clicked
May 28, 2014What do I need to put into a macro attached to a command button to set the focus to a text box once the button is clicked?
View 1 Replies View RelatedConflicting Requirements Between Popup Forms And Main Form's Fields
Jan 23, 2006I have set certain fields on my main form to be required to protect from accidnetal skipping which has occured in past. However, in middle of form, there are a group of checkboxes, which opens their correndsponding popup forms for more details. Right now, I get an error if it try to pop up a form because not all required fields are filled in.How do I make Access suspend the requirments whenever the checkboxes are checked and additional info are being inputed?Edit= tried setting it as dialog boxes, but to no avail.
View 9 Replies View RelatedForms :: Right Click Menu In Popup Form On Access 2010?
Dec 11, 2013I'm trying to do right click menu on listbox.
currently i'm trying to implement a right click menu which will show a simple messege box.
My problem is that the list box is on a pop up form which opened up maximized. Now when i'm right clicking on the list box i see the right click menu but when i'm clicking on one of the menu options, nothing happenning (it seems that it don't go to the function as it should). i've also putted breakpoints on the function but it never tips.
It's important to mention that if i'm setting the form popup option to no the right click menu works perfectly (when i'm clicking on one of the options i see its matching messege box).
I'm running the following vba code:
This is the mouse up event handler for my list box:
Private Sub Song_List_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
' Call the SetUpContextMenu function to ensure it is setup with most current context
' Note: This really only needs to be setup once for this example since nothing is
[Code] .....
setting up the "SetUpContextMenu" sub:
Public Sub SetUpContextMenu()
' Note: This requires a reference to Microsoft Office Object Library
Dim combo As CommandBarControl
' Since it may have been defined in the past, it should be deleted,
' or if it has not been defined in the past, the error should be ignored
[code].....
Forms :: Data Entry Form - Set Focus On Tab Control
Sep 10, 2014On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
Forms :: Subform Takes Focus From Top Of Main Form?
Jun 29, 2014I have a form that I created that has a tab control. When the form loads, it automatically sets the focus to a field in the subform. This wouldn't be a problem, except when it does it hides the tabs at the top of the form so I have to go and scroll back up every time I click a tab so that I can see the tabs. Is there a way to adjust this? I have tried hiding a field and setting the focus to it and that didn't work. I also tried setting the focus to the actual tab, but that also did not work.
View 8 Replies View RelatedForms :: No Focus For Unbound TextBox In Continuous Form
Oct 27, 2014I have unbound TextBox in continuous form and I would like that it never get focus. In property I specified Enabled=No and Locked=Yes. But it doesn't work.
View 8 Replies View RelatedForms :: Setting Popup Reminder On Form Load For Expiry Date
Jul 26, 2015I have a form (Access 2010) in which i insert contracts; each contract has a start and an expiry date, but instead of dd/mm/yyyy i would like the user to be able to insert just the year, while the day and month are predefined values and they are automatically inserted (i.e. 01/10/yyyy; the year being the only value that changes, and it is manually inserted by the user).
I would like to set a pop up remainder (on form load) x days before the expiry date, but, because too many of them have the same expiry date i am wondering if the reminder can be set on different days, based on another field (i.e. partner location [country]).. i.e. reminder for contracts with Austria to pop up 60 days before expiring, for UK = 67 days and so on.. or even a specific day for each, i.e. for Austria = 01/08/yyyy, for UK 01/09/yyyy).