I need to close a form after checking a condition in the Form_Open event.
I expected that by setting Cancel = True that the form will close but this does not happen.
DoCmd.Close also does not close the form.
How can I play a sound with event On Open Form.
View 13 Replies View RelatedI have some code on a button that opens a form and changes the caption of a label:
Code:
DoCmd.OpenForm "frmRepair", , , , , , "CancelNo"
Forms![frmRepair].Form.[lblmain].Caption = "Missing Parts"
This code works well and frmRepair opens with the updated label caption. The original value was "Return/repair Information"
A few other things need to change on frmRepair depending on this caption as well as the values of some other fields, so I use the following code in the onload event (although I later tried the onopen even)
Code:
'Disable labels button if there is no RMA and the item is a repair
MsgBox Me.lblmain.Caption
If Me.lblmain.Caption = "Return/Repair Information" Then
Me.txtRMA.SetFocus
MsgBox Me.txtRMA.Text
[Code] ....
However, I cannot get this to work as the "if" statement always returns "Return/Repair information" and not the modified caption. The message box confirms that this is the case.
I suspect that this has to do with the point in time that the frmRepair loads or opens and when my code enters the modified values.
I have a table that holds the SQL texts for ca. 1000 Select queries (mostly minor variants that are used to programmatically swap out RowSource strings for combo boxes). I'd like to have a quick and easy way to open/review/modify these queries.
One strategy would be to display the SQL strings in a field on a Datasheet form, then use an onClick event on a text box linked to the SQL-holding field (or perhaps an onClick event tied to an unbound text box on the form) to open the associated query. That would allow me to view the SQL of the query that I want to open, allow me to quickly scroll through the list of stored SQL texts, and give me options for sorting or limiting the SQL-texts displayed in the datasheet form.
But, I can't seem to get the onClick event to work. The problem seems to be that I can't figure out how to pass the SQL string contained in the field to a function that will use that string to open the query .
Making a small database, Got 1 Table.
1. ContactDetailTable
Got 3 forms.
1. ContactIDForm
2. ContactInfoForm
3. NewContactFrom
In ContactIDForm it contain 1 textbox name 'TextBox' with Button Name 'Btn'
In ContactIDForm there is only 1 Text Box ContactIDTextBox and 1 Button. User Enters ID in TextBox and On Button Click Event it should check data from TextBox in Table name (ContactDetailTable) in field ContactID and if there is record matching, ContactInfoForm should Open else NewContactForm should open with ContactIDTextBox value in it.
I'm trying to open a form based on another form and have the following code in the Open Event:
Private Sub Form_Open(Cancel As Integer)
On Error GoTo Err_FormOpen
Dim strForm As String
strForm = "frmProductionBatch"
If IsLoaded(strForm) Then
Me.ProductName = Forms![frmProductionBatch]![ProductName]
Me.BatchNum = Forms![frmProductionBatch]![BatchNum]
Else
End If
Exit_FormOpen:
Exit Sub
Err_FormOpen:
MsgBox Err.Description
Resume Exit_FormOpen
End Sub
It works however I get an error message stating that I cannot assign a value to this Object?
What is going on here?
I've taken a break from Access for a while, but I'm back at it again and having some difficulty. I am trying to open a form with a timer to state that the database is going to shut down in five minutes if they don't respond. I'm obviously using the wrong code. I've been trying to use the following:
Private Sub Form_Timer()
DoCmd.OpenForm "frmWarning"
If Forms!frmHidden!chkActive Then
Forms!frmHidden!chkActive = False
Me.TimerInterval = 300000
Else
DoCmd.Quit
End If
End Sub
It crashes on the 'DoCmd.OpenForm "frmWarning"'
I have code for a button click event. Essentially I have a main table form that I use to enter customer data and info. I also have a button that I use to add that customer to a separate table that I use for special Customers. My code copies all the data I need copied to my other table, so I wont waste space here typing my code that actually copies the data to the new table. What I will list are the two commands I am using after that code, to close the current form (the one with the button) and open the form for entering special customer information (the form to edit data on my other table). It works flawlessly, but when it opens the other form, it opens to the first record. I want to know how to make it open to the record which I was viewing when I clicked the button to copy the data.
DoCmd.OpenForm "Special Customer Data Entry", , , Number = Me.Number
DoCmd.Close acForm, "Customer Data"
I have a report that tracks scores for our employees. From the report, you can click a button to add a new score in a form or edit an existing score(frmscoretracker). On this form there are two subforms, in a tabbed control to track additional information about the score; what areas were marked down(Trends), and was it a failing score(AutoFail).
When this form opens I have it programmed to only show the subform if there is data in it. The goal being, if I am adding a new score and there is no existing trends or Autofails for this new record, neither subforms will show - I will add an after update even to show either trends or autofail depending on the score recorded. Also, if someone chooses to edit the score, whatever subform with data, will show as well.
When someone clicks to add a new score, opening this main form to a new record, both of the tabs show. However, if the form opens to an existing record, the appropriate tab shows. Here is the code
Code:
Private Sub Form_Open(Cancel As Integer)
'If the subform has a record, the tab is visible, if not, the tab is not visible
If Me.frmtrends.Form.Recordset.RecordCount > 0 Or IsNull(Me.Trends) Then
Me.Trends.Visible = True
Me.TabCtl33.Visible = True
Else
Me.Trends.Visible = False
End If
[code]...
Both tabs are set as not visible in the default settings. Is there something in this code that is triggering then to be visible when there is no record in the main form?
I have some code for a button on click event to open a form and select the record which corresponds to a value in an unbound text box. The code is:
Private Sub Command25_Click()
On Error GoTo Err_Command25_Click
Dim stDocName As String
Dim stLinkCriteria As String
stDocName = "frmOpenPatientRecord"
[Code] ....
This works fine when I put in a 10 digit NHS number but opens a blank record when I enter a four digit or six character/digit PatientNumber. Both patient number and NHS number are text fields in the underlying table.
Hello all,
I have a form where I want to validate enties before moving off the record.
I put my validation in the BeforeUpdate event of the form. If validation fails, then I set Cancel=True. So far, so good.
But if the user closes the form (either with my close button, or the standard close button), or presses 'Page down' to move to the next record, then even if validation fails, the form will close (or move record). What I want is for the user to be left with the form open, on the current record.
Can someoneon point me in the right direction ?
Thanks,
StepOne
Hi,
I have a form with a text box using a mask edit. How would I go about "exiting" the form by pressing on a button?
DoCmd.Close will not override any incorrect entries in the textbox - Is there a way to "undo" anything in the textbox so that I can exit the form after clicking on the command button.
DoCmd.Close will only close the form if the entered data in the mask edit is either correct or there is not data. (An error pops up if there is incomplete data in the textbox).
Hello, I am trying to find a way to open a form with a subform on a specific record (for the form and the subform), I came up with the following but keep getting a mismatch mistake which means me think I am not doing it right.
What would be the apropriate way to achieve what I am trying to do?
Dim stDocName As String
'To Link to 1) Drawing File ID on main form
Dim stLinkCriteria As String
'To Link to 2) Drawing ID on subform
Dim StLinkCriteria2 As String
stDocName = "FrmDrawingDetail"
stLinkCriteria = "[DrawingFileID]=" & Me![DrawingFileID]
StLinkCriteria2 = "Forms!stDocName!SFrmDrawingDetail.Form!TxtDrawingI D=" & Me![DrawingID]
DoCmd.OpenForm stDocName, , , stLinkCriteria And StLinkCriteria2
I have a form in which job times for individuals is entered. As the data is entered, a macro fires to calculate various costs (Nat Ins/Pension/Total cost etc etc), and that data is stored in a table.
I now have written code to enable the inputting of the data into the database directly from the Excel sheet in which the data is first entered - this is great as it cuts out a data entry repeat and will be a big big time saver.
when i open a form i want to open another frm at the same time. i have a main form with some buttons in it. when i click on a button and a form opens then i am not able to click on a button to open other forms from the main form.
View 2 Replies View RelatedI have a continuous form with a button 'Cmd1' & a textbox 'txtMail' which is set to visible no.
When the user clicks Cmd1 - then txtMail becomes visible.
I can do it using vba on the buttons click event but when it executes txtMail for all the records become visible.
How do I use a button's click event on the form's current record - Private Sub Form_Current() so that when the user clicks Cmd1 on the current record only txtMail for that record becomes visible.
I'm using Access 2007.
I've got a DB, which has 3 forms ( all 'under' 3 navigation buttons/tabs ). The main form ( Client's form ) is set to show first, and currently has a recordsource of about 1350 records. I think the size of the recordsource, and the fact it 'loads' the other two forms all 'in one go', is slowing it down ( between 5 and 10 secs. to load ).
I read I should set the Visible properties of forms, not shown immediately, to false, only setting them to True in the On_Load event - when Tab is selected. Ideal I thought. However, I can't find this property in the Form's property sheet.
I am having problems with my subform. I have a table that has events with dates. When I create a subform with eventnames, it shows up. However, I cannot get the eventdate to populate in the case form.
I have attached the database ...
I want to add an event on Form Header when double click it will filter the values, which i did with macro, but could it happen on second time double clicking it it refreshes whole as original?
View 2 Replies View RelatedSome of the things that bring me screeching halt really surprise me. I swear, this sounds like it should be so easy....
What I need to do is check, when the user clicks on a button, whether a specific table that is going to be modified/deleted later in the click code is already open. If it is open, I will msgbox the user to close the table first and exit the sub.
Any ideas?
All help, as always, is much appreciated!
John
How to structure some MS Access 2007 Forms for the following scenario.
My table structure is as follows:
Product
++++++
ID (pk)
ProductName
...
Tag
++++
ID (pk)
TagName
ProductTag
+++++++++
ProductID (fk)
TagID (fk)
I want to have a main form that allows me to search for and displays a list of all products (and the dozen or so attributes for each product) that meet that criteria (I'm thinking a continuous form view of products).
So far so good. No problems.
Now I want a "tagging" form to the right of my continuous forms product list that is linked to the product which currently has focus. The tag panel should always show a complete list of all Tags. I want a checkbox next to each tag that I can switch on and off whether that tag applies to the currently selected Product. I also want to be able to add tags on the fly (without leaving the main form).
I think I have three forms in play :
Main Form
Product Form (subform to Main) my product search criteria is probably on this form header.
Tag Form (also subform to Main)
But with this approach I'm have trouble linking the two sub forms to each other. Actually, I'm having huge trouble figuring out how to display the list of all tags with a check box that when checked on and off creates / deletes a record in the ProductTag table and I really want Access to do as much of the CRUD as possible. I would prefer to avoid writing screeds of SQL INSERTS/DELETES on events. Am I asking too much of Access?
I am working with 2 forms and a subform.
frmTaskTracker -subfrmInbox (Datasheet View - based on a query)
frmUpdateInboxItem
subfrmInbox displays a summary of tasks on a task list. The user navigates to frmUpdateInboxItem from frmTaskTracker. After updating a record from frmUpdateInboxItem, it is possible that it the record in question will no longer meet the requirements to have it listed on subfrmInbox.
I have attempted to add code to the on close event of frmUpdateInboxItem to requery the sub form on frmTaskTracker but am not getting the syntax correct.
correct my code? Alternatively is there is a more correct way to do this, I'd be happy to learn it.
Code:
Option Compare Database
Private Sub cmdClose_Click()
Me.[frmTasktracker]![subfrmInbox].Requery
DoCmd.Close acForm, "frmUpdateInboxItem"
End Sub
I have a Main form with a combo box that pulls names from a table. Alongside the combo box is a command button that opens a form which allows the user to edit the names in the table.
The problem: When a user edits a name and closes the edit form, the edit is not immediately displayed in the combo box. However, when the Main form is closed and reopened, the edit is properly displayed. Can I somehow refresh the combo box in the On Close event of the edit form?
I have a simple data entry form on which there are about 30 to 40 data fields to be update by users. One of the field is called "Stage" which is a combo box with 2 entries "Formal Case" and "Informal Case" with no default value whien a form is first opened.
Users will normally create a data entry which updates the table and save.
However if in future users open any one existing record and try to change Stage field from Informal to Formal or vice a versa I would then like this action to
1) update a time stamp concatinated with the stage change value in a text field perhaps
2) save/close the form
3) open a new form with all the existing entries(plus changed status of "Stage Field") with a new record ID and new time stamp.
I have tried using a timer event to not show a form until it is fully loaded, to no avail.
Code:
If CurrentProject.AllForms("FONNewEdit").IsLoaded = True Then
Me.Visible = True
Me.TimerInterval = 0
End If
I have tried using the onload, onopen but the form still displays before being fully loaded.
I have a report, on a control tab, on a main form.
On the form are two buttons: one to show all items, and one to filter them based on a boolean field called showitem.
The buttons work with the code below.
What I want to do but cannot seem to figure out is to have the report default to no filter.
The bound query has no criteria.
I'm trying to set the filter property via the on open or on load event and even if I isolate the report, cannot seem to reach it.
Code:
Private Sub b_hide_items_Click()
Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem <> 1"
Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = True
Me.Profile_Timeline_wNotes_subreport.Requery
End Sub
Private Sub b_show_all_Click()
Me.Profile_Timeline_wNotes_subreport.Report.Filter = "timeline.showItem = 0"
Me.Profile_Timeline_wNotes_subreport.Report.FilterOn = False
Me.Profile_Timeline_wNotes_subreport.Requery
End Sub