I have created a form and insert, delete some columns, controls in layout view. When all 's completed, i saw a dark vertical line on top right of the last colulmn but i could not delete it. I deleted column, set property but they all did not work. What i have to do now? Below is a screen capture from my situation.
View RepliesHere's the statement
Code:
sqlfinal = "SELECT Employees.ID, Employees.Name "
sqlfinal = sqlfinal & "FROM ((qryDeptVBA INNER JOIN qrySkillVBA ON qryDeptVBA.ID = qrySkillVBA.ID) "
sqlfinal = sqlfinal & "INNER JOIN Employees ON qryDeptVBA.ID = Employees.ID) "
sqlfinal = sqlfinal & "INNER JOIN qryAreaVBA ON Employees.ID = qryAreaVBA.EmpID "
sqlfinal = sqlfinal & "GROUP BY Employees.ID, Employees.Name;"
If i simply remove the GROUP BY line and stick the semicolon at the end of the previous line (.EmpID; ) it works just fine. How is adding a group by line causing an error?I tried adding another parenthes at the beginning ((( and ending the joins as EmpID); and that failed with the exact same error.
I am creating a form that is a letter. This letter will get printed off a lot. A line at the bottom of the sheet makes it look tacky. I am told this line prints on our other databases also. How do you get rid of it? Our company uses access 97 :mad:
View 6 Replies View RelatedI have a continuous form and having trouble with the layout. When i fill in the record and then tab to the new record it displays the textboxes on top of the last one instead creating a new line bellow?
View 2 Replies View RelatedI have a main form with 3 sub forms. The main form is tied to a table called QUOTES_MASTER. The first sub form is tied to a table called QUOTE_ LINE_ ITEMS_DIRTGLUE. It calculates the subtotal when selecting items. The relationship is one-to-many linked on QUOTE_ID.
The second sub form adds up total of all line items and is not tied to a table.The third sub form adds ESTIMATED FREIGHT to the PRODUCT TOTAL and is not tied to a table. how to get the values from the line items form inserted into the QUOTE_LINE_ITEMS_DIRTGLUE table as they are added.
I also want to insert the total value from ESTIMATED DELIVERED into the LINE_TOTALS field in the table QUOTES_MASTER.I tried this code on the product total sub form but it doesn't do anything and there are no errors:
Private Sub PROD_SUB_AfterUpdate()
DoCmd.RunSQL "UPDATE QUOTE_LINE_ITEMS_DIRTGLUE SET QUOTE_LINE_ITEMS_DIRTGLUE.SUBTOTAL = Me.PROD_SUB WHERE QUOTES_MASTER.QUOTE_ID = " & Me.QUOTE_ID
I programming a eBay upholder, and having an issue with the description, as there cant be any line breaks in the column. I have little knowledge of Vba programming. I think I can use the replace command to change the line breaks to spaces.
View 4 Replies View RelatedI can change multiple things on a line graph with VBA.
Me.Graph47.chartType = GraphType ' take 65 for line
with me.graph47
.SeriesCollection(1).border.Color = vbblue ' change the line color
.SeriesCollection(1).border.Weight = LineWeight ' change the line weight to for example 3
.SeriesCollection(2).MarkerSize = MarkerWeight ' Change the marker weight, for example 4
.SeriesCollection(2).MarkerBackgroundColor = vbblue ' Change the marker color,
.SeriesCollection(2).axisgroup = 2 ' put this series on the secondary axis
end with
SeriesColection(1) is line with markers. This is correct.But now I want the seriescollection(2) without line, so only the markers. I cheched the MSDN site from Microsoft. The Excel trick with the macro does not work for me.how to hide the line with VBA for only SeriesCollection(2) in Access?
I currently have a database that has the following tables:
t_Employees
t_Cost_Centers
t_Changes
The [t_Changes] tracks what cost centers the employee is in with a start date and end date:
Change_ID
Employee_ID
Cost_Center_ID
Start_Date
End_Date
I want to run a query that will show a single line per employee, and different columns for each of the cost centers the employee was in. If the employee was in 3 different cost centers, the query would have 4 columns (1 for the employee, 1 for the first cost center, 1 for the second cost center, 3 for third cost center).
I saw another thread to linked to a concatenate example by Allen Browne, but that places multiple values in a single cell. I want different columns per cost center.
I am teaching myself Access 2007. I have a successfully imported my database to a table, and now I want to design Forms and Reports. It seems Access wants to basically display the data in either one of two formats, either Columnar, or Tabular. One Form displays the data in columns, with one field per line, and the other displays the data in rows, with one whole record per line. I need a Form (and Report) which will display more than one field per line, and use more than one line. For example, some lines will have 2 or 3 fields, then the next line may have only 1 or 2 fields. Following is a print-out of a record from my existing database (stored in a comma delineated .txt file and read and printed by a program written in DOS, QBasic):
.
461-1036 :c: Assignment of O&GL
Feb 28, 2008 Filed: Mar 20, 2008
Grantor(s): Plains Exploration & Production Company;
Plains Resources Inc.; Pogo Producing Company LLC;
Pogo Panhandle 2004 LP; Latigo Investments LLC;
Latigo Gas Services LP; Latigo Petroleum Inc.;
Latigo Petroleum Texas LP
Grantee(s): Oxy USA Inc.
Comment: Assigns 50% of Assignors' interest;
CORRECTION ASSIGNMENT at 466-493 deleting certain
properties from the description
[The attached .pdf file shows a better view of the print-out]This data is abstracted version of a document recorded in the public record in a courthouse. On the first line there are 3 fields:
1) the Volume-page,
2) A notation that we have a copy of the document, and
3) the title of the document.
On the 2nd line there are 2 fields:
1) the date of the document and
2) the date the document was filed in the courthouse.
The next 3 fields are displayed one at a time in columns. How I can get Access 2007 to display like this?
I have an Orders form (frm-Orders) that includes a subform (frm-Order Details Subform). The subform has line item totals.I want to be able to sum the line item totals and show the result on the main form, but I can't get it to work. Seems like it should be an easy thing to do.
Someone suggested I try this but it didn't work:
In the footer of the subform I created this expression - =SUM([Line Item Total].
Then in the main form I created a textbox with this -- =[Forms]![frm.Orders].[Form]![frm-Order Details Subform].[Form]![txtSum].
I am looking for displaying the totals from a query onto a form.
I have a query which has a total line showing a count of the number of entry's in each column. I would like to be able to display these totals on one of my forms in text boxes (or any other way). Is this possible and if so how do I do it ?
On a continuous form, I would like the user will add a new record via button click instead of popping open a blank record at all times. With AllowAdditions set to False on Form load, and turning it back on button click I can get a new record added. I am having trouble determining where to turn it back off. After Insert - doesn't seem to delete the blank row until I move to the blank row, so this doesn't accomplish what I am looking for.
AfterUpdate (for each field on continuous form) - this did what I wanted, but I was only able to update one field on the form for the new record. The combo boxes then were viewable, but I could not make a selection.
I have added a delete button to my form but now I cannot save the form.
I get the error message:
"In order to save your changes you must remove any layouts that have empty cells in them and/or set the has module property for the form to no."
How do I locate empty cells.
i removed the DIsTINCT in my query to move some field to be updateable on the form. Once I did that my detail section of my form was empty ..why and how do I fix this problem.
View 1 Replies View RelatedI have a tab control on a form, and I want to use "Hotkeys' to get from one page to another (or more specifically, to toggle the visibility of the pages).
So, I set up the tab control with the pages I want hidden set with visible=No. Then I enable the Form.KeyPreview, so that the form will get a chance to look at all the key presses.
Lastly I have a Form.KeyDown handler, that looks like this:
Code:
Private Sub Form_KeyDown(KeyCode As Integer, Shift As Integer)
MsgBox "Key pressed (1): Shift value is " & Format(Shift)
' Detect Hot-keys for the pages in the MultiPage wizard, and make them Visible or not visible
' P/D/X/S/R/H/C
If Shift = acAltMask + acShiftMask Then
[Code] ....
This is early on in the design iteration - more will happen with the pages, but this is an easy way of reviewing various aspects of a project.
So what happens?
I put a breakpoint at the first If statement, and sure enough, it picks up the Ctrl key or the Alt key, whenever they are pressed. (I need to use the mouse to clear the msgbox, naturally!) When I press both of them (Ctrl/Alt) I get the required value of 6, but I never seem to get to the second msgbox. In addition, if I comment out the first message box, I also never seem to get to the second msgbox (ie the point where the combination has been detected.
KeyDown obviously has to fire for each component of a HotKey combination, and the Shift parameter has been shown to be cumulative. The only thing I can think of is that somehow I need to turn off keypress processing somewhere else (Used to be possible to use Cancel to do this, I seem to recall).
I'm quite new to using Access 2007 and I'm trying to create a form from different tables which have relationships. I've used the form wizard and added all the fields I need from the different tables, however, when I click form view it only shows the title and nothing else. When I'm in design view everything is showing..
View 1 Replies View RelatedI have a form that displays the quantity of plants that we are growing by genus, (marigolds, impatiens, petunias). each genus has many different varieties that can be used to make up the mix. I need to have some type of worksheet where we can put in the total qty and calculate the quantity of each variety by putting in percentages for each variety, much the same as you could do with a spreadsheet. The results of that worksheet then needs to be saved to a table for future use. Being fairly new to Access I'm not really sure what format to use. Is there a way to display the results of a query in datasheet view minipulate the numbers and update to my table?
View 1 Replies View RelatedI've got two tables - one that works like a cypher and one with all my records.
I have 2 queries. One that is a simple query that extracts data that is not so user-friendly and puts it into a user-friendly format. The Other query is for any records that the first query excludes because the new combination of data (lets just call it a code) is not in the cypher table, but needs to be added.
How do a create a form that will show the records in the 'excluded records' query and allow me to select from a drop-down list a specific set of categories to update the cypher table ?
Example :
Record Table: Cypher Table:
Ford Focus = Sedan
Ford F-150 = Truck
Ford Freestyle = Wagon
Ford Escape = SUV
Now a new model comes in, a Ford Edge which is an SUV but is not in my cypher table.
I have the query to pull in the excluded Ford Edge, but I want a form to show "Ford Edge" in the first column and be able to select from a drop-down list "SUV", and either automatically update my cypher table or require me to press a button to update the table (whichever is easier).
I am doing a worksheet for college and have been asked to create option groups on a form, but I cannot work out how to do this.
The screenshot shows what I have to do but I cannot get the option group wizard to open.
When creating my form based on the design in the screenshot I dragged the Rate field onto the design view sheet but it has only one option button connected to it, I need to add another one that will be connected to the same field and am not sure how to do it. I did try adding another option button from the control bar but I am not sure if is connected to the same field with the correct yes/no properties.
I have a form with a subform. The form shows an invoice and the subform the items to be invoiced. On this form I want to have a button that creates a credit of this full invoice.
My question is now how to add the existing invoice and details again to the same invoice table (query) and same details table (query).After clicking this button in the two tables should be the original invoice/details and its credit.
So, I have a form with 4 combo boxes and 1 field for a date.
I'd like to be able to choose an option from one or more comboboxes and create a report of all of the records matching those criteria.
Will this require VBA Coding or can I do this without it? I don't know VBA
I know I will probably have to use Queries and the Like criteria but I'm not sure where to begin and how to do it.
Is is possible to create a form that is 4 pages in length? After info is entered in first two pages I would like to print out all 4 pages to pass on to another person.
View 10 Replies View RelatedI am trying to create an input form for input to tables.There is a main TblContacts table with fields such as: LastName, FirstName, Address, etc. There are also ID fields for the Company and Country and joins to the Company and Country tables, each with just ID and name fields.I want to have all the fields from the TblContacts table and the Name fields from the Company and Country tables on the form. I want to be able to select the Name fields from the Company and Country tables from combo boxes and for these also to populate the Company and Country ID fields (from the TblContacts table).
To create the form, I selected Create Form whilst the TblContacts was open. Then, I added the combo boxes pulling the names from the Company and Country tables.My problem is that the selection of the Company and Country names above is NOT populating the Company and Country ID fields on the form (taken from the TblContacts table. I have checked in relationships that the joins have been created.
I am creating a database that has a transport aspect to it.
Basically, I have a table with the list of buses, and tables for routes plied by each of the buses.
What I would like to do is that on a datasheet form, I would wish that if at the point of entering data, the data entry person selects Bus Number 1, then in the next field where the route goes, ONLY the options for the routes that this bus plies show up as what has to be selected from the look-up menu that appears. The same for the other buses and routes. Is this possible?
The database is attached....
I have a relationship between two tables; the parent table is "Client Information" with a primary key of "Client_ID", the child table is "Event Information" and the foreign key is "Client_ID".
I know that within the Event Information table I can select which Client_ID to use as the link. I want to have that done within a form, however. I have a form for Client Information with a subform for Event Information. If I go into the table and manually set the Client_ID then everything displays fine.
How can I set the Client_ID in the subform to automatically match the Client_ID in the main form? I can only assume that these solutions require the parent/child relationship to already have been established.
I have little bit problem in access here, if i want to create two textbox... first textbox for time and second textbox for unit. When I type (time) in first textbox, second textbox will appear automatically the unit number...
Example
1textbox-----------2textbox
1<time<=60 ------- 1 unit
60<time<=120 ------ 2 unit
120 < time <= 180 ------- 3 unit