I am totally new to Visual Basic.I have dependent cascading combo boxes setup. The hierarchy goes:
Segment
Family
Class
Brick
Now, I need the value in the Brick field to create a varying number of other cascading combo boxes. They are the Brick Attributes. The brick attributes are the labels for the combo boxes and the brick attribute values would be the values you can chose from within the combo boxes. Depending on which Brick you chose, there are a varying number of Brick Attributes, and thus a varying number of needed combo boxes to pop up.
We've got an Access Database that I've edited in the past, I've got the cascading combo boxes set up so that, depending on which employee is selected, different "rate" options appear as work done. If I open the database afresh and select an employee (for example, employee 9 in Image 1 and employee 19 in image 3) the rates given to that employee are correct.
However, if the database remains open, I can't get the rates to update with the selected employee - even if the employee is clicked, rentered, etc.
I have been reading about how to set the table up for cascading combo boxes. Some recommend breaking down into several tables, others say keep it to one table.
Mine is broken down to 5 tables (and work) but if you go to the form (split form) and make a change in design view - even something as simple as changing the width of a field - then the split table looses 2 fields information (the middle fields) but the information is still saved in the main (studentcourse) record table.
My question is how do i make it more stable so that the split form table section does not lose the information?
I have a form with various input boxes, three of which are combo boxes. These combo boxes need to affect one another. So let's call these cmb1, cmb2 & cmb3.
Hypothetically let's say:
Within cmb1 the list is A, B, C & D
If the user was to choose A, cmb2 would show the options 1, 2, 3, 4, 5 etc.. If the user was to choose B, cmb2 would show the options 2, 4, 6, 8, 10 etc.. if the user was to choose C, cmb2 would show the options 1, 3, 5, 7, 9 etc..
(So, it is possible that if the user chooses A from cmb1, cmb2 would show 1 and if the user chooses C from cmb1, cmb2 would also show 1)
Using the example in the brackets above:
If the user chose cmb1 - A then chose cmb2 - 1, cmb3 would then show the options Option1, Option2, Option3 etc..
BUT
If the user chose cmb1 - C then chose cmb2 - 1, cmb3 would then show the options Random1, Random2, Random3 etc..
At the moment I have a table with 3 columns. Within the table is every possible combination of the drop down, i.e:
-A l 1 l Option1 l -A l 1 l Option2 l -C l 1 l Random1 l -C l 1 l Random2 l Etc...
I have tried to use the example shown on this website but i've had no luck: fontstuff.com/access/acctut10 (If you look at "Example 2", thats what I tried to do)
i have a main form which allows me to fill in Order Information within which is a subform which allows me to fill in Order Lines.My Order Lines contain the following fields:
Extrusion Length Qty etc. etc.
Elswhere in my database (tblLengths) I have set up a list of possible lengths for each Extrusion and therefore when an order is filled out I want the user to be restricted only to those lengths that are possible with the particular extrusion they have chosen. This list contains the ExtrusionID and LengthID so that I can query the available lengths for a particular Extrusion.Within my subform I have set the record source to point at the tblLengths and criteria on the ExtrusionID to point to [Extrusion]. I've also put a requery against the Extrusion field so that I can force the combobox to refresh its list of results.
My problem is that I am getting unexpected results each time I add an Order line into my form and reading up I see that what I am trying to do is a big no-no.
OK, I so I am trying to filter one combbox tbltCatch from tblLocation (which is a sub filter from tblLocationCategory). Thing is, I am trying to select "Catches" filtered from the tblLocationCategory table. Reason being is because the "Catches" are the same the location types (example below). I know the code I am trying to utilize is incorrect and needs to be modified.
how to create the cascading combo boxes that I need. For this, I have three tables:
Locations -- All store locations Products -- Part Number and DESCRIPTION of any type of item that is available for rent Serial Numbers -- (Unique) Serial number for each individual product, with its Product ID (foreign key) and Location ID (foreign key)
Each location has its own set of products available for rent, each with their own serial number. There may be more than one of the same TYPE of product at a location, but there will never be a repeated serial number.
I would like to have three (cascading) combo boxes. The first would allow the user to select a LOCATION. The second will have a list of all the types of products available at that location (DESCRIPTION). The third should have the list of SERIAL NUMBERS available at that LOCATION for that type of product (DESCRIPTION).
My goal is to have two combo boxes the first filters the second. it controls the semester that I am viewing. This works if i don't use continous forms but when i do it requeries every record in the form instead of the current record. I am not an access or vb guy but i have picked a lot up. please help!!!
I'm having some issues using the cascading combo box technique on my form.
I have a form, which contains a subform in continuous view, which contains a few combo boxes.
One of those combo boxes (available resources) should be filtered depending on the value of 3 other combo boxes (task types, source languages, target languages).
What I would like to be able to do is run the filtering routine on this resources cbo (currently VBA code that changes the row source value) when the user clicks on it.
It's kind of working right now: when I click on the arrow to open up the drop down list, the values are indeed filtered. The problem I'm having though is that, if I then click on that same cbo for another record (or any other cbo in another record for that matter), the resource cbo of the record I previously set gets deleted.
I've got a form (frmMain) with two combo boxes (cmbCategory and cmbProducts). I have set the combo boxes up to be cascading, so that when you select a value in the cmbCategory box, it influences what is visible and selectable in the cmbProducts box. What I wanted to happen is this:
1. User selects a category 2. cmbProducts defaults to the most recently entered Product within that category, and the form pulls up that product's details.
I have the cascading combo boxes set up so cmbCategory has an AfterUpdate event that runs a macro. In the macro is the command to refresh the cmbProducts box, and the cmbProducts box's RecordSource is set to a query that filters the Products based on the value of the cmbCategory box. I then set the cmbProducts Default Value to a DMax command that pulls the largest ID number from the query. Everything works great, except when I choose one category (the correct product comes up, the latest one entered for that product), then go back and choose a different category without reloading the form. The cmbProducts box stays showing the previous Product, and doesn't automatically update with the latest product for the new category. So it works the first time out of the gate, then just stops working, and won't work until I close and reopen the form again.
I've tried the refresh command, and I've tried adding an AfterChange event to the cmbCategories box. Nothing seems to work! I also tried running a close form/open form command in cmbProducts' After Update to enable the DMax command again, but this blanks out my Categories and Products boxes (which it's supposed to... I don't want anything to come up when you first open the form, both should be blank until you start selecting values).
I have three boxes Type/Sub-Type/Item. They all filter down to the next one, the problem is, when I get to the 3rd box, it filters ONLY from the 2nd box and loses the filter from the 1st. What do I need to do to get it to maintain the filter from the first box and then ADD the filter from the second box when populating the 3rd box?
tried following Microsoft example and several others but my problem comes up when I click on Group in Ticket list, I get a parameter value popup. I know I'm getting it from my Where statement that is supposed to setup the row source for Category. I tried using numbers and text but I messed up somewhere when it comes to the vba.
Me.cboCategory.RowSource = "SELECT DISTINCT Category.Categories FROM" & _ " Category WHERE GroupName = " & Me.cboGroup & _ " ORDER BY Category.Categories" Me.cboCategory = Me.cboCategory.ItemData(0)
I have a cascading combo box working fabulously in a form. However when I embed that form into another form, the cascading combo boxes quit working. After doing some searching around on the web I think my issue is either in the query that the dependent combo box references and/or in the "after update event procedure" but I just can't seem to figure out the exact changes to make to my database. Details:
Tables with data for combo boxes:LOOKUP TABLE - Veg Species - Species Type, LOOKUP TABLE - Veg Species - Species Name. Related together based on common field: SpeciesType
[code]...
When the form with the combo boxes is embedded as above, I can select the species type from the dropdown but when I try to select the species common name value I am asked to
"enter parameter value - Forms!SUBFORM2a - Enter Specific Veg Info!cmbSpecies_Type".
I am trying to create a Cascading Combo Box for my Form in Access 2010. I ahve written the code:
Private Sub Combo11_AfterUpdate() cboCombo13.RowSource = "Select TblAcc.SubFamily " & _ "FROM me.TblAcc " & _ "WHERE me.TblAcc.Family = '" & cboCombo13.Value & "' " & _ "ORDER BY me.TblAcc.SubFamily;" End Sub
But keep getting the same "Run time error message 424: Object required"
And when I define the error it says "Identifier under cursor is not recognized" (the yellow arrow comes up and is pointing at the "ORDER BY" line.
I would like Combo Box 13 to give me the SubFamilies of the certain Families choosen from Combo Box 11. (Each Family has different SubFamilies). But if I ignore the error, Combo Box 11 lets me choose a Family and Combo Box 13 gives me options to choose any SubFamily in my DB.
Currently, I have a form with a combobox that lists all of the names of the tables inside my database. Depending on the table selected in the first combobox, I would like to have another combobox which allows the user to choose from the field names inside that table.
I have a set of cascading combo boxes. When a value is selected in Cat 1 ID, it narrows down the selections in Cat 2 ID which narrows down the selections in Cat 3 ID.
However, the values don't show up for columns Cat 2 ID or Cat 3 ID until I enter the row. Then I have it set to requery the fields because the underlying data isn't populated. But then when I leave the row, the values go away.
Why doesn't it show the underlying value from the table? Each column is bound to a field in a table - I would assume that the recorded value would show up. Did I miss something easy?
What I am trying to do is create a data entry form to an "order table" using 2 cascading combo boxes. I have created a data entry form based on a query. I can't get the cascading combo boxes to work properly.Here is the code:
Private Sub Combo0_AfterUpdate() Combo2.RowSource = "SELECT L2_ID,L4_Element_name,L5_Category FROM qry_ord WHERE L3_ID = Combo0.Value;" Combo2.DefaultValue = [Combo2].[ItemData](0) Command4.SetFocus End Sub
I'm wondering is it possible to create a multiple parameter query which will return results even if you leave some of the parameters blank ?. I'm trying to set up a Form which will allow users to select parameters using combo boxes but at the moment you need to fill them all in or you'll get no results...
I need some help setting up my tables to allow cascading combo boxes. I need to document when a Pharmacy IV room and chemotherapy room are cleaned. Each Room requires different cleaning procedures.
Here is my table structure: TblCleaningDuties DutyID-Auto# (PK) Duty - text (Example- mop floor, clean hood, wash ceiling, wash sink) Frequency-text
If the user selects Clean Room I don't want them to see wash sink and anything else not pertinent to the Clean Room. How do I set up the tables? Thanks, Jason
Just wondering if anyone can help Im creating two combo boxes where the first one determines the values in the second one.
The tables are made up of the following;
Line
Line number (PK) ..... ....
Main Setting
Part Number (PK) Press Line (FK)
Now ive took the advice of previous threads but im having the following error message when im creating this;
The record source 'SELECT [Main Settings].[Part Number] FROM Main AS Settings WHERE [Main Settings].[Press Line]=[Forms]![Example]![Line]' specified on this form does not exist.
I know that this doesnt exist but im typing it correctly. Access seems to be changing my statement i.e. inserting the AS command. Any help will be much appreciated
Right I have followed one of the sample databases and modified it to create cascading combo boxes like i needed.
Now all i need to do is use them in the context i need.
Basically I have country, region and sub region. These cascade to each other in the form which has been created. If you select a country, then in region you in only see the regions in that country, etc.
What i need is to be able to use the cascading combos boxes in conjunction with the "Location table". So someone can put in a project number and then use the cascading combo boxes to to chose the country, region and sub region boxes saving all of the data into the location table .
Please can someone help, as it took me allmost three hours to create the cascading combo boxes but now i cant even use them for what i wanted them for,.
I have trawled this forum searching for help with cascading combo boxes, it was very helpful but alas I need that bit more.
I have 2 combo boxes and the result is displayed in a subform. The problem is that it will only display one selection made from the Combo boxes and I need multiple selections on display in the record.
It is a parts job worksheet in a garage where multiple work is required on a vehicle. It is based on Work Type and Work Codes which then bring up the detailed description.
The first Combo Box is Work Type and this allows you to select letters. The second Combo Box is Work Code and this allows you to select numbers.
I used the example I found on here but haven't changed the field names as I daren't alter the coding until I know it will display multiple selections in the subform of the record.
I attach the database to see of anyone can help me, ppllleeeaaassssee. I woul dbe most grateful if you could make the changes and zip it back up as I ain't no VB programmer.
i currently have 4 combo boxes that each has its own table, and setup as cascading. Now what i want to add is an <All> in each combo to box to give any results in that table.
i have
combo 1 SELECT [tblProductManufacturer].[ProductManufacturerID], [tblProductManufacturer].[ProductManufacturer] FROM tblProductManufacturer UNION Select "<All>", "<All>" as Bogus From tblProductManufacturer ORDER BY [tblProductManufacturer].[ProductManufacturer];
combo 2 SELECT tblProductModel.ProductModel, tblProductModel.ProductModelID FROM tblProductModel WHERE (((tblProductModel.ProductManufacturerID)=[Forms]![MainScreen]![MainWindow].[Form].[CboProductManufacturer])) UNION Select "<All>", "<All>" as Bogus From tblProductModel ORDER BY tblProductModel.ProductModelID;
combo 3 SELECT [tblProductVersion].[ProductVersion], [tblProductVersion].[ProductVersionID] FROM tblProductVersion WHERE ((([tblProductVersion].[ProductModelID])=[Forms]![MainScreen]![MainWindow].Form.CboProductModel)) UNION Select "<All>", "<All>" as Bogus From tblProductVersion ORDER BY [tblProductVersion].[ProductVersionID];
combo 4 SELECT [tblProductSize].[ProductSize], [tblProductSize].[ProductSizeID] FROM tblProductSize WHERE ((([tblProductSize].[ProductVersionID])=[Forms]![MainScreen]![MainWindow].Form.CboProductVersion)) UNION Select "<All>", "<All>" as Bogus From tblProductSize ORDER BY [tblProductSize].[ProductSizeID];
in place of UNION Select "<All>", "<All>" i have also tried
UNION Select Null as AllChoice, "(All)" as Bogus
And in place of UNION Select "<All>", "<All>" as Bogus i have also tried
UNION select distinct null, null (And added distinct after the first Select of the query)
I have 4 Combo Boxes on my form (cmbo1, cmbo2, cmbo3, cmbo4). I have successfully managed to get the cascading down as long as the user starts with cmbo1.
What I would like to be able to do is have the user select any combo box on the form and have the rest of the boxes filter automatically, e.g., a user selects a value in cmbo2, the afterupdate would then filter/lookup the values of cmbo1, cmbo3, cmbo4 based on the value selected in cmbo2.
Is this possible and if so, does anyone know how to do this?
