Forms :: Case Sensitive Password To Display In Restricted Form
Nov 19, 2014
I found a useful password protected form using input box and tried it successfully. However there are two issues. The password is not case sensitive and the password entered displays in the box. Is it possible to turn the password to case sensitive and the entered password is displayed as *s.
'Attached to On Click event of cmdOpenEmpForm
Dim strPasswd
strPasswd = InputBox("Enter Password", "Restricted Form")
'Check to see if there is any entry made to input box, or if
'cancel button is pressed. If no entry made then exit sub.
[Code] ....
View Replies
ADVERTISEMENT
Jan 20, 2014
I'm new to access vba and I'm trying to create a login form. I have already my code to login but i want to validate the password in 'case sensitive' basis. Below is only what I've got so far.
Code:
Private Sub cmdLogin_Click() Dim login_validation As Variant login_validation = DLookup("Password", "tblLogin", "Username='" & Nz(txtUsername.Value, "") & "'") If Nz(login_validation, "") <> Nz([txtPassword].Value, "") Then MsgBox "Incorrect Password. Please try again." txtUsername.Value = "" txtPassword.Value = "" txtUsername.SetFocus Else MsgBox "Hi " & txtUsername.Value & "," & vbNewLine & vbNewLine & "you have successfully login!" DoCmd.OpenForm "frmMain" End If End Sub
View 5 Replies
View Related
May 2, 2005
Is there someone who can help me please???
I have a list with data like below
S123
s123
E456
e456
I would like to keep them separated when I do a grouping via a query, but Access does not seem to be open to case-sensitive characters. Who can help me???
Thanks!!
View 1 Replies
View Related
May 26, 2007
Is there any reason as to why, when searching a MDB file via ASP, that it would be case sensitive by default?
View 5 Replies
View Related
Jul 12, 2013
I want to make this bit of code below case sensitive :
Code:
SQL_Entire = "WHERE [" & ReplaceStringSelectedField & "] LIKE '*" & SearchedString & "*';"
SQL_Beginning = "WHERE [" & ReplaceStringSelectedField & "] LIKE '" & SearchedString & "*';"
SQL_End = "WHERE [" & ReplaceStringSelectedField & "] LIKE '*" & SearchedString & "';"
View 14 Replies
View Related
May 22, 2006
I am using the following:
SELECT CPL_CLIENTS.CODE, CPL_CLIENTS.FULLNAME FROM CPL_CLIENTS
WHERE (((CPL_CLIENTS.FULLNAME) Like "*" & Forms!frmSafeKeep_AddClient_SearchDesig!txtSearchT ext & "*"));
As the control source of a listbox, so that the user can enter something in "txtSearchText", and the listbox will be narrowed to only those those clients that have a matching part of their name.
The problem is that the user enters, for example, "duncan", and the list returns nothing, when in actual fact there are 5 matching records. If the user enters "Duncan" (note the capital letter), they get all 5 records as they should.
If memory serves, access should only be case sensitive if you tell it to be - and this is working fine on other forms.
The only difference between them is the data source. Other forms are getting data from linked tables in the backend. This form is getting it from a linked Oracle table.
View 4 Replies
View Related
Mar 20, 2014
I'm trying to open a report and highlight certain text. So I have a textbox that takes the original field and replaces certain text (based on user input) in bold red. Here is my formula:
Code:
=Replace([Language],[txtKeyword],"<font color = ""red""><b>" & Upper([txtKeyword]) & "</b></font>")
It works fine, but the only problem is, I don't know how to make it case sensitive. So let's say the user input (txtKeyword) is "contract." If it's the beginning of a sentence, I want the C to remain capitalized, but if the C is not capitalized, I don't want it to show capitalized. Is there a way to do this without making the formula really long?
View 7 Replies
View Related
Sep 13, 2006
Is there a way in a form to have a combo box that causes other fields to show based on the value of the combo box? For example, if there are 3 selections to choose from in that combo box, selecting option 1 causes 5 fields to show up in the form. 5 other fields show up if option 2 is selected, and a different 5 fields for option 3.
I'm trying to track different details for each combo box selection. Right now I have a field for every detail of every option showing, and the form is pretty cluttered. I'm trying to only show the pertinent data.
If it's a built in Access function, that'd be great. If not, and it requires some coding, please know that while I'm very comfortable with computers and have done some programming, I've never done any coding specifically in Access, so I don't even know where to go to edit the code. So if you could point me there, too, I'd appreciate it.
Thanks in advance for the help.
View 8 Replies
View Related
Jul 27, 2012
I have a report that has a link to open a a form "ProjectDetailsActive" to a specific record ID from the report. It works.
I have 3 subsets of users who have restricted access to the form "Project Details Active". By that I mean that when they open this form, it hides and rearranges some tabs, and disables certain controls. If a user from one of these 3 subsets tries to open the link to a specific record in the form, it does not work. The form opens to the first record available instead of the selected record. This is only a problem for these 3 user groups. For users who do not fall into these 3 groups, the filter works.
This is the only code in the form that does the restriction, but I don't know where the process is going wrong.
Code:
Private Sub Form_Current()
LoadBudgetPage
CancelRsn.Enabled = False
'detect number of line items for current project
Me.lblOrderCount.Caption = GetNumRecords & " line items for this project."
[code].....
View 8 Replies
View Related
Jun 4, 2014
I am having problems with my subform. I have a table that has events with dates. When I create a subform with eventnames, it shows up. However, I cannot get the eventdate to populate in the case form.
I have attached the database ...
View 5 Replies
View Related
Sep 22, 2014
I have a lengthy CASE statement in my database that displays specific text in a field based on the value of another. Simple stuff but for some reason it randomly will not work on certain values, and never the same one twice. Is there a commonly known cause for this? I have verified that the spelling and spacing etc. are correct in my code so that shouldn't be causing the problem.
View 2 Replies
View Related
Oct 6, 2014
When I type the first letter I into the search text area I get the following error
Run-time error '2110'
Microsoft Access can't move the focus to the control SearchResults
Most of the code is below
QRY-SearchAll
SELECT Clients.ClientId, Clients.ClientFileNumber, Clients.ClientShortFileNo, Clients.Salutation, Clients.FirstName, Clients.LastName, [Group Branches].BranchCode, Clients.Phone, Clients.Mobile, Clients.Fax, Clients.BpayRef, Clients.TradingAs, Clients.EntityType, Clients.ABN, Clients.ACN, Clients.Address1, Clients.Address2, Clients.Town, Clients.State, Clients.PostCode, Clients.Country, Clients.Email, Clients.ClientGroup, Clients.DateCreated, Clients.Notes, Clients.LastModified, Clients.UserCode, Clients.BdmCode, Clients.CollLongNo, Clients.CollShortNo,
[Code] ....
View 1 Replies
View Related
Jan 9, 2014
Access 2003
Trying to filter a form based on a field with wildcard. My form has a txtCustFilter control where a customer's name can be entered in part or whole. The Customer's name is in PCCustomerName
This code works but, I'd like to make it case insensitive
Dim strFilter As String
strFilter = "[PCCUSTOMERNAME] LIKE ""*" & Me.txtCustFilter & "*"""
Me.Filter = strFilter
Me.FilterOn = True
View 9 Replies
View Related
Oct 24, 2014
i have found a code that brings up a box when tab or clicking in to a box for editing as below:-
Dim strPassword As String
If InputBox("Please enter the password:") <> strPassword Then
SomeOtherControl.SetFocus
TextBox1.Locked = True
End If
its just that need to add a password as well, i have tried to put this in between the <> but this does not work. i would like a message to say incorrect password as well if possable.
View 4 Replies
View Related
May 9, 2013
I have a login button in which if the username has an empty password or the user is his/her first time to login, another form will appear which is the Set New Password. How can I change the password of that current user, my Set New Password Form has two fields which is 'txtSetPassword1' and 'txtSetPassword2' and an OK button.
The user must enter a new password and a verification password, if the 2 fields matched, the new password entered will change the password in the table. The table name is 'tbl_UsernamesQry'.
I have done it but the main problem is, it changes the other's users password not the current user.
Here is my code for the OK button of that form Set New Password:
Private Sub btnSetOk_Click()
If Me.txtSetPassword1.Value = Me.txtSetPassword2.Value Then
Me.txtSetPassword1.SetFocus
[Code].....
View 11 Replies
View Related
Jul 16, 2013
I have a password protected form that works fine. However, when you type in the password it can be seen on the screen. Is there a way I can change that so that when the password is typed in it can't be read (perhaps showing asterisks)?
This is what I'm using:
In ON CLICK event
Dim PassWord As String
PassWord = InputBox("Enter Password")
If PassWord = "MYPassword" Then
' Open Form
DoCmd.OpenForm "MYFormName"
DoCmd.GoToRecord , , acNewRec
Else
MsgBox ("You're not authorized")
End If
View 6 Replies
View Related
Apr 8, 2014
I would like to implement a login form to my DB.
I have a table db-users with three fields: empID; empName; empPassword
I have a form with an unbound combo box: cmbdbUserName
And I have a text box: txtPassword where the user will type in their password.
cmdDBLogin is the button I want to add the VBA code to on click.
Code that will compare the inputs of the two objects listed above to the data in the table fields listed above that?
View 11 Replies
View Related
Mar 28, 2014
I'm an Access newbie and I'm having trouble restricting a combo box on a subform based on the selection of the combo box on the form.The combo box (Combo1) on the main form (FrmOrganisation) gives a list of companies, I want the combo box (Combo2) in the subform (SbFrmEmployees) to list people only from that company. I then have a subform within that subform that displays information about the employee.
View 3 Replies
View Related
Mar 16, 2013
Is there any way of making data that is inputted in lower case to automatically change to the first letter of each word being a capital ...
View 4 Replies
View Related
Feb 6, 2014
I created a small database with a user login form, along with a password reset form. Running it in my sandbox as an accdr file, the password value resets just fine, but on my test machine with the Access 2010 runtime installed, the password reset form doesn't reset the password. I will try to describe the state of things as of this point.
1. The LoginF presents with a combo box for the user to choose their name, and a text box to enter their password. The code below is on the After Update of the password text box.
Code:
Private Sub txtPassword_AfterUpdate()
'Check if user has been chosen
If IsNull(Me.cboUser) Then
MsgBox "Please Select User Initials", vbInformation, "Warning"
[Code] ....
2. The password reset form has two text boxes for the new password and to re-enter the same, as well as a command button with this code.
Code:
Private Sub cmdResetPassword_Click()
If Me.Password = Me.PasswordTest And Len(Me.Password) & "" > 0 Then
DoCmd.RunCommand acCmdSaveRecord
DoCmd.Close
DoCmd.OpenForm "LoginF"
[Code] ....
As I say, this works as an accdr file, but not in the actual runtime environment.
View 1 Replies
View Related
Jan 26, 2006
Is it possible to restrict a one-to-many relationship so that the many side could be restricted to say 4 records? For example a student can take four courses (no less, no more)
View 4 Replies
View Related
Jan 26, 2006
Is it possible to restrict a one-to-many relationship so that the many side could be restricted to say 4 records? For example a student can take four courses (no less, no more)
View 3 Replies
View Related
Mar 20, 2014
What I would like to do is create a list box that will only display the information from another form that is related to the current form.So I have a form call Equipment Catalog and that form is related to Equipment features 1 to M relationship and the Equipment Features is related to a Features form M to 1.
So what I want to do is display all the related equipment features in a listbox that is related to the current PK of that form.So if there is only one feature on one form the list box will only display that one item however is there is 6 features on another it will display all 6.I have been trying SQL and Queries but I still can't get it to work.
View 1 Replies
View Related
Aug 23, 2005
Hi,
Im copying information from Excel to Acces. As I enter the information in fields in Access, this goes just fine. The problem is that sometimes I have to change the information I put in. So for example I first copied 10 record(cells), but now I discover that I have 20 records/cells. But Access refuses to let me enter more than ten. Does anywbody know why it does this and how I can fix it?
Thank u,
Stacey
View 3 Replies
View Related
Mar 8, 2005
Hello,
I have Customers recorded and a number of addresses associated with each customer.
They are in two tables linked by CustomerID and are shown in forms as frmCustomers & subfrmCustomerAddresses.
From frmCustomers, I open another form which records the orders maid by that customer. What I would like on this form is to select the customer address to be used for the order.
I can build a combo, but this shows all addresses on the database. What I would like for the combo to show only the addresses for that customer only.
I do not want two combos, one which selects the customer and then another which shows the addresses. This is not very user friendly to ask for the customer again. I would like one combo to show addresses for the customer on the form.
I would be grateful for any guidance on how I can achieve this.
Thank you.
View 1 Replies
View Related
Aug 24, 2004
hi
help is needed yet again :-)
I know when creating a text field in the format option
you can use the > or < sign so that when text
is entered it automatically changes it to uppercase or
lowercase - but i need it to be Title Case, any one know
how I can do this....
View 11 Replies
View Related
