Forms :: Change Command To Toggle - Run Time Error 2115
Apr 14, 2015
I have a routine than has been working perfectly up to now. My save routine was called by clicking a Command Button called cmdAdd.
I tried to change this Command Button to a toggle button by deleting it then creating the toggle button, naming it cmdAdd and clicking on the event property to link it to the existing procedure. PS It is an UnboundForm
BTW, I've done this for several other commands without a problem but with this particular case I get the following error
Run Time Error 2115.
The macro or function set to the Before Update or Validation Rule is preventing Access from saving etc."
It seems likely that I need to do something to the toggle properties.
It allows the docmd.save but still says "You must save the current field before you run the Requery action"
The system is looking to save/update and something is stopping it. Funny though that this doesn't occur with Command Button
I have tried decompiling, compact and repair, commenting out every line that involved updating a field or variable (Except for a recordset operation that does correctly do the updates required)
BTW the Toggle button has no Before or After Update events - Only the On_Click
Just tried out ControlTip Text on some command and toggle buttons. The text pops up on some but not on others and I cannot determine what the difference is (the properties are essentially the same except for name, caption etc). What buttons work and what do not seems random but if I copy/paste a button that works, the copy always seems to work.
What to do, I have a form that will reset online user of my system the field is yes or no type boolean and i using combo box that will show only online people but my problem is how to reset the yes to no when i choose from the combo box a username I want to logout. I use command button also.
I have a tabbed form in a navigation form with a chart on it. The records source of the chart is a query. The query runs when you click the tab and takes a long time. I changed the Row Source of chart to "" and that eliminates the query running on form load. I've read many posts on changing that row source when a command button is clicked. I tried
in the onclick event of the command button. This doesn't work. I've tried many variations of the syntax. I don't know if I have to tell the query to run after the row source is changed.
On a side note, the query criteria is based on beginning and end dates entered into text boxes on the form. This all works if the query loads when the form is opened.
I have a form and I want the dates to be displayed based on predefined time. In this case, I want my form to show present date from present day's 7:00 AM to next day 7:00 AM.
I have a form where I am capturing StartTime and EndTime of certain events. I have set the input mask as 99:00 >LL;0;_
My users think it is too much to enter am or pm. What they want is the system to calculate the am pm based on the time entered.
If the time entered is between 8:00 to 11:59, the system should save it as 11:59 am and if the time entered is between 12:00 to 7.00, the system should save it as 7.00 pm.
Can I use the Like command in an If Then statement? I'm getting a syntax error
If [Primary1Name] Like 'PO*' Then MsgBox "You cannot use a post office box address. Use a residence address.", vbOKOnly, "Incorrect Address Information" DoCmd.GoToControl "Primary1Address1" Else End If
I am needing to design a form that allows a user to add or overwrite a number of records by copying and pasting the information from an Excel Spreadsheet, however one of the problems is that the information being sent has times stored as text - so, for 04:45, it is simply stored as 0445 on the spreadsheet.
Is there a way to have these autocorrect once pasted into the datasheet?Also, is there a way to make a datasheet form that copies a number of records into itself depending on a user selection? The basics of what I am trying to achieve is:
I have a number of services that operate on a number of services (public transport), each vehicle has a unique identifier (Bonnet), and each place in the schedule has a unique identifier (RunNo); there are different schedules for different day types (Saturday, Sunday, Monday, Tuesday to Thursday, Friday and so on), and the times that each RunNo goes out and comes in differs depending on the day type.
At the moment, I have a table which has the following fields:
ID (Autonumber, PK) DayType Route RunNumber TimeOut TimeIn
My idea/hope is that a user will be able to open a vehicle allocation datasheet for the day, select the day type (lets say, Saturday) which will then populate the relevant number of rows with the schedule information (looking at a Saturday, that would be 128 rows), and then a blank column to add to the records a vehicle ID that is being used for each RunNo for the day.
Now, on top of all this, I need to also cater for vehicles being substituted during the course of the day - - - if one breaks down, it will have to be de-allocated from the list (so presumably by changing the TimeIn to the current/actual time rather than the scheduled time) and the user will need to be allowed to add a further row to show which vehicle was used next against that RunNo.
Just to further complicate things, there is quite a number of vehicles that will have a time in which is in the following day (ie after midnight) - whilst this isn't a problem in storing the times, I also want this table to be looked up to determine whether a vehicle is currently allocated or not.
The fields for the AllocatedVehicles table are:
ID (Autonumber, PK) RunNumber Bonnet Number DateOfService TimeOut TimeIn
It is hope that all of these with the exception of Bonnet Number can be populated by selecting the day type?
I am attempting to create a form (Access 2013) that will include buttons to open the hyperlink menu to add a hyperlink into a table. It works if you click "Ok" without issue, however, if you click "Cancel" or click on the "X" I get a "Run-time error '2501' - The RunCommand action was cancelled". This is obviously referring to the RunCommand in the VBA code. The code does not reference the cancel or close option of the hyperlink editing box. I don't know how to correct this error.
Code:
Private Sub Command9_Click() Me.[Hyperlink].SetFocus DoCmd.RunCommand acCmdInsertHyperlink Command9_Click_Exit: Exit Sub
[code]....
Also, is there a way to get the hyperlink to populate as the full network path and not the drive letter?
The following code is in the Form Current. As you can see if BranchCode = 2 I want to do a DLookup on the SystemPreferences table that holds a number Branch fields that hold document archive numbers for that branch. I want to move the number in the CroArchiveNo field into the field ArchiveNumber. I then run an Update Query on the system preferences table to add one to the relative branch archive number.
If Me.[BranchCode] = 2 Then Me.[ArchiveNumber] = DLookup("[CroArchiveNo]", "SystemPreferences", "[SysPrefId] = 1") DoCmd.SetWarnings False DoCmd.OpenQuery "UpdateCroArchiveNo" DoCmd.SetWarnings True End If
My problem is that I get an error
Run Time error 2448 You can't assign a value to this object
What's the best way to trap the error I get when I don't input the time correctly in a date/time control?? I have a the following as an input mask: 99:00 >LL;0;_...02:30 PM
I created a form that has about 200 fields and all the fields are utilized at a point depending on the work order assigned to us. I wanted to know if it's possible to put like a toggle box or a check box etc. next to the field so if it is checked it would be in a Dark color and the ones not utilized are in a shade of gray. All the fields are coming from the same table. Another thing it's an estimate worksheet so a row would have something like, Labor, QTY, HRs, Overtime, total as columns, so I would want a check box to have control over those but one for each row, EX contractor, locksmith.
Is there a way to show the toggle buttons in an option group as NOT selected when the form first loads up? I've cleared all the default value properties in the table and the form but it always loads as showing one of the buttons pressed/selected. I want the form to load and both buttons in the group look the same.
I am making a specialty form where it must toggle on or off when the user clicks on a boxed area. Since toggle backgrounds cannot be set to transparent, I need to do it some other way. I thought of either using a button to control a hidden checkbox, or just writing code altogether. The problem is that I don't know what code to use to programmatically change the state each time the box is clicked.
I am attempting to create a toggle on a form that would instruct a query which criteria to use.
Specifically they are date criteria. I want to be able to toggle between evaluating on a start basis verse a ship basis.
If the toggle is set to 'Start Date', the query would use the start date as its criteria. If the toggle is set to 'Ship Date" it would use the ship date.
The other complication is that within the query, "Start Date" and "Ship Date" are two separate fields always contained in the query, so how do I write the query so that it only applies criteria to the appropriate field based on the toggle setting?
I would like to create a command button on the header of a form. The button should perform a toggle switch: click once to activate the task and click it again returning original state. I can create the command button to perform a task but do not know how to return to original state. The button should have indicator showing which state is in.
I have a form with about 40 Toggle buttons on it. I want the form to populate from a table. This table stores the status from rooms.
My table name is [Room] Fields [Room] and [Room_Status]
I want to call the button BtnBS1 (Room BS1) and if the status for that room is occupied the button when loaded will be RED, and if it is available it must be green.
I want the form to be an graphical overview of what rooms are occupied and what rooms are available. By clicking on a green room I want another form to open to allow me to fill it with data.
I have a form with about 10 subforms on it, all of which have queries as source objects. All of these queries are based off the same table which contains a field for Customer. What I would like to do is have a toggle button on this form that, once pressed, essentially adds a "not like" criteria to each of these subforms' queries EXNot Like "Customer_A"). When depressed, the queries/subforms should exist as is.
My first issue is that when I add a toggle button, the control wizard does not start. It starts up fine for any other control, however. For example, I imagine that on the After Update event of the toggle button I would requery each of the subforms, but I'm not sure how to add the "not like" criteria to each of the underlying queries.
I currently have two forms. One being my main form and the other being a pop-up form to update e-mail addresses. On my main form, I have a button that is currently programmed to generate several e-mails. Before those e-mails are generated, I would like the pop-up form to appear asking for any updates to e-mail addresses. Once the pop-up form is closed, I would like the code on my main form to continue.
I have a form. On this form is a tab control with 5 tabs. Four of these tabs have subforms on them. The 5th tab is sort of a "settings" page. What I would like to do is have a button on the 5th tab, that toggles the subforms on the other four pages between the regular form view, and datasheet view.I know I can use the "DoCmd.RunCommand acCmdSubformDatasheet" to do this, however I am unsure as to how to apply it to the subforms on the other tabs. They aren't "in focus" so the command won't work properly.
I have a tab control at the bottom of my main form, and some of the tab pages contain subforms. On one of the subforms I have created a filter to divide the content into "complete" and "incomplete." I have also added a toggle button option group to the subform to toggle the filter (one button for "complete" and one for "incomplete"). I'm using a macro to apply the filter, but it isn't working. The filter does work properly if I use the "Toggle Filter" button on the Ribbon, but I want to create something a little more user friendly.
If [tgl_Complete_Incomplete]=-1 Then ApplyFilter Filter Name Where Condition =(([tbl_Action_Items].[Completed])=True) Control Name [Forms]![Search_by_name]![sfctlActionItems].[Form]![tgl_Complete_Incomplete] Else RunMenuCommand Command RemoveFilterSort End If
I get the error message "The 'ApplyFilter' action requires a valid control name that corresponds to a subform or subreport."
If I remove the content of the Control Name field and open the subform independently (i.e. not as a subform), everything works fine.
I have this command which copies the contents of a field in a report to a field in a form which is acting as a filter and to requery. (from within the report)how to apply the call command from within my report
Call txtfilter_change
When I try: call [forms]![shop touch screen].txtfilter_change I get errors
