Forms :: Changing RecordSource Of A Form Based On Field Values?
Feb 16, 2014
I have a simple add form that will add an entry to one of two tables: Box 1-1, or Box 1-2.
They have the exact same fields. In the add form, I want the user to specify a Rack field and a Box field. Box 1-1 would be Rack 1, Box 1. Box 1-2 would be Rack 1, Box 2 (there will be more tables later, but just using two for now until I get it working).
But right now my form always adds to the table Box 1-1 - I can't get it to switch.
I've added the code I have so far below. The first part is what I'm having trouble with, the second part just uses a Submit button to add a new record - I'm just including it in case it's interfering in some way I'm not seeing. I'm running Access 2007.
Code:
Private Sub Switch_BeforeUpdate()
If Me.Rack.Value = "1" And Me.Box.Value = "1" Then
Form_Add.RecordSource = "Box 1-1"
ElseIf Me.Rack.Value = "1" And Me.Box.Value = "2" Then
Form_Add.RecordSource = "Box 1-2"
[Code] ...
View Replies
ADVERTISEMENT
Jun 11, 2014
I have a continuous form that displays data from a table. What I am trying to accomplish is to change the format of the field if the string length is equal to 11, to "@@@-@@@-@@@@-@". Otherwise if it is greater or less than 11 then no format.
I have tried it using code:
If Len(Me.FormFieldName)=11 Then
Me.FormFieldName.Format = "@@@-@@@-@@@@-@"
End If
Is it even possible and if so is my syntax correct or am I way off base?
View 8 Replies
View Related
Jan 7, 2015
I'm having a spot of trouble trying to get conditional formatting to work. I have an overview form which displays current quotes going through the system, the QuoteStartTime field is generated from the Now() command.I Would like if possible to show, 1 hour = Green, 2 hours = Amber and 3+ hours Red.
I've tried variations of
hour([QuoteStart])>1
DateAdd("h",1,[QuoteStartTime])
I've done this before with a date only field before, but working with time is taking too much time.
View 1 Replies
View Related
Jul 30, 2013
I would like to set up a picture in the form that changes based on a combobox selection, for example if you select from combo box list "design1", a picture that have a name : design1 will appear as a background to the form ..
View 8 Replies
View Related
Apr 10, 2006
Hello,
I'm trying to create navigation buttons that navigate in alphabetical order. I know that the easiest way to do this is by creating a query and using the query as the recordsource for my navigation buttons, but for the life of me I cannot figure out how to actually change to the recordsource to that query for only that navigation button.
I'd appreciate any help
Thank you
PRHC
View 2 Replies
View Related
Apr 18, 2005
Weird yet aggravating problem.
I am trying to setup a routine that will allow the user to change the RecordSource of a subform. The RecordSource is being changed yet once I move to another record the subform is reverting back to the original subform RecordSource. I am using the below command to change the subforms RecordSource...
Me.MySubformName.Form.RecordSource = MySQL
I even to make a copy of the subform and I changed the table it is linked to yet I got the same result
Me.MySubformName.SourceObject = "MyOtherSubForm"
There are no functions in the record selectors that would interfere with the subforms RecordSource.
Any suggestions as to why the RecordSource of my subform will not "stick" when I move to another record?
Thanks in advance for your help!
View 8 Replies
View Related
Jun 29, 2005
Hi
I have problems working with a 3 level form
I have one main form called Projects
Depending on the record on the form Projects, the subform called Products will display the correct info
And on the OnCurrent event of the form Products, it will display the correct info for another subform called Product_Info
The problem is, the subform called Product_Info is dependant on a field on the Projects form, and on a field on the Products form so I cannot directly link the Product_Info form with either the Projects of Products form
What I'm doing is changing the recordsource of the Product_Info subform on the OnCurrent event of the Products subform but for some reason it won't work
If I display the recordsource of the Product_Info subform, it displays the right recordsource triggered on the OnCurrent event of the Products subform, but the data doesn't display
Thanks
View 3 Replies
View Related
Aug 25, 2014
Field B is a combo with the options of : 100% Availability, 75% Availability, 50% Availability, 25% Availability, OR Not Available
If I choose "Present" in Field A, I want the "Not Available" value to disappear as an option.
View 2 Replies
View Related
Feb 5, 2014
In a form is there a way to change sort order based on which field is active?
I'm using a Split Form which gives me the ability to sort by clicking on the header name ans selecting sort. This slowing things done since my workload is heavy.
View 3 Replies
View Related
Oct 11, 2006
Hi
I have some drop downs on my form, which has some code that decides which recordsource to use.
When I first select an option from the drop down, the query takes 10 seconds to load data.
I then select another option, which runs a different query, which takes x seconds.
If I then select the original option from the dropdown, the data loads onto the form in less than a second.
Why is there a delay the first time round and not the next? Has Access saved some kind of query plan? If so, why doesn't it save it permanently?
View 1 Replies
View Related
Feb 26, 2014
I have a table listing about 20 elements as field names eg FE, CR, NI, TI and so on.
I have built a form which has a combo box listing these elements by selecting "fields" in the property settings of the combo box & next to this combo box i have 2 text box's where the user can input Min & Max values to pass on to the query.
E.g., FE (chosen from the combo box) value between (Text box1) and Text box 2.
I can run the query to give me values between the 2 text box's by using the following formula in the criteria (Between textbox1 and textbox 2).
The issue i have is to be able to select the element from the listbox, input the min & max values identified and be able to pass this to a query so the query can filter based on the field and values passed?
View 3 Replies
View Related
Sep 8, 2014
I have a table with the fields Thermometer_ID (primary key) and CalibrationType (combo box list with the options of InHouse or SendOut)
I want the user to click on a button and have an input box to input the thermometer_id. Then if the CalibrationType is InHouse open form Verification and if it's SendOut open form Thermometers.
View 2 Replies
View Related
Apr 5, 2014
I have a query that I am using as recordsource for a form. I also have a list box that I am using to change records on the form.
My issue is I need to use the same form for similar queries. For example, I want to open the form with only "Manager1" records displayed. So I need to do a different query. I don't want to use parameters or have employees type the manager in. It needs to be just a button they click.
So my two options are - make 10 copies of the form each with their own new query recordsource for each manager, or use one form and dynamically input the recordsource before the form opens..
I want to do that -- but when I try the list box gets all screwed up. Because the list box is relying on another SELECT query to populate. I have 10 buttons each with a different recordsource query feeding into the form when I click but I get so many errors in the fields when the form opens.
View 3 Replies
View Related
Mar 25, 2014
I currently have a Job Management System where the Customer Order Form displays all jobs via a main form and an order details subform. This form is used for inputting new jobs and for viewing existing jobs via links from other reports such as a job schedule or customer orders report. It is always reached via a clicking of a "New Customer Order" Button where the form is filtered to new record or via double clicking on an order number in another screen and filtered via the order number.
I am now in a position where the database is growing too large and I want to archive the data in the Orders / OrderDetails Tables into Financial Years and put them in a separate backend database. However the jobs will still need to be viewed via the customer order form in order for them to be duplicated the following year.
I have created a union query of the PreviousFY and Current Orders to allow the "search jobs by customer" query to work. This works fine, but I now need to make the record source of the Customer Order form dynamic.
I have created a CurrentFY query to feed the form if it is a current job and a PrevFY query if it's from the previous FY.
I have written code to check the OrderDate against the financial year to work out which database the job is from and set recordsource according to that result. This is currently in the OnCurrent event as I also have other code there that checks details of the order to determine if fields should be editable.
However I am finding that when I parse the order data between the forms the "new record" command or the order number is not being retained or checked. If this because I don't have a recordsource set when it opens?
I tried setting the recordsource as the currentFY on open and then do the check but that didn't work.
View 1 Replies
View Related
Feb 10, 2015
Currently we track areas of non-conformance for a fleet of flight simulators. Each flight simulator has a particular ID number. In some instance an area of non-conformance is associated with a single simulator, at other times it is a fleet wide issue and applies to all or some simulators. In order to track as well as advise leadership and the contractor responsible for maintenance of the simulators of the situation we generate individual response letters.
In order to track each instance of non-conformance my idea was to create a new record for each deficiency. In the event that it is applicable to multiple simulators I would like to fill out the form with all pertinent data and then place a checkbox associated with each simulator and when the record is saved, it creates one record for each simulator with a checkbox ticked.
Once the deficiency on each simulator is fixed, I would check a box for a field called rescinded, which would remove that particular deficiency on that particular simulator from the active list of deficiencies but the others would still remain because they are associated with unique records.
View 14 Replies
View Related
Jan 31, 2015
I need to enter workload counts for 10 people, and it is done on a monthly basis. So I have a table of Months (Jan-Dec), a table of names, and a joined table with the months, names and a field for the workload counts.
I would like to make a form where I could select the month and all the names show up so I could go and enter the counts for everyone at the same time. I've attached a diagram to show what it would look like
View 3 Replies
View Related
Mar 9, 2013
I've got a DB, which has 3 forms ( all 'under' 3 navigation buttons/tabs ). The main form ( Client's form ) is set to show first, and currently has a recordsource of about 1350 records. I think the size of the recordsource, and the fact it 'loads' the other two forms all 'in one go', is slowing it down ( between 5 and 10 secs. to load ).
I read I should set the Visible properties of forms, not shown immediately, to false, only setting them to True in the On_Load event - when Tab is selected. Ideal I thought. However, I can't find this property in the Form's property sheet.
View 1 Replies
View Related
Nov 12, 2013
I have a form with a (large) number of controls which acts as a kind of read-only dashboard of data. The data is split across a number of tables (4, for now, but may grow) I've created a query which amalgamates all of the data from the tables into a single dataset and set that as the RecordSource (Snapshot) of the form. I now want to bind each of the controls to a particular field returned by that query.
However - I have a combobox (same form) which allows users to select a date and I need the controls to update with the relevant data for that date whenever the combobox is changed. The query already returns values for each field over a range of dates so the data is available within the form's RecordSource - I just don't know how to include the date criteria, as specified by the combobox, when binding each individual control?
View 2 Replies
View Related
Feb 22, 2006
Hi.
I have
Form with 3 list boxes.
1st LB populates 2nd etc.
The 3rd LB value chooses a field.
The Fieldname Table has field "Field Type"
I want to change the Text box next to the List box to this entry in the Db.
Ie. If I choose a field in the LB, say "Done?", then to update that field it needs to offer me a "yes/no" field type
Therefore it changes the TextBox to a Checkbox (or combo with Yes and No as options)
Any ideas?
View 2 Replies
View Related
Oct 18, 2014
I have a query that is based on Property & tenants. It runs a report that gives me all the property listed with the tenants & other info for the property's. Sometimes the tenant moves out & the property is Vacant, so i have a Vacant flag in the property table.
But when i run the query it prints out the last tenant. Can i pick up the vacant flag & change the tenant name to Vacant on the report? As i don't want to delete the tenant from the tenant table.
View 3 Replies
View Related
Jun 30, 2015
I have my Assets form and the primary key is the ChargerID, in this form I have an "Add New Job For This Asset" button, which opens up the Jobs form at a new record.
How do I make it so that the ChargerID field is automatically filled with whatever the previous record was instead of being blank.
For example if I have Charger12345 open in the Asset form, I'd like to click the Add New Job button and it automatically have Charger12345 in the ChargerID field of the Jobs form.
View 5 Replies
View Related
Jun 4, 2013
I am making a very simple 'registration' database for a children's event in a couple of weeks.I the table/form there is a checkbox field called 'consent' which, if checked, indicates that a child can leave the event without parental consent.
There is a report printed on each child (a registration page which the leaders get a copy of). I would like on this report a 'red box' to appear if the child cannot leave without permission (i.e. the consent box is not checked). I would also like this 'red box' to appear on the form. I had thought of doing it this way - but I'm not sure if it's the best, or if it's possible:
Have a field in my table called 'consentindicator'. When the 'consent' box is checked, there is a period ('.') placed into the 'consentindicator' field. It is set to turn red when a period is present. That way, when the consent box is checked, a get a red 'box'.
View 12 Replies
View Related
Sep 18, 2014
I have form named home page in this homepage form in the form header i have inserted some fields from some tables like province, district, community etc. these fields are unbound and are used for filtering purposes, when i select a province all districts related to that province displayed and when i select a a district all related communities displayed, there is a one to many relationship between district table and community table,
What I want is, when i select a district on the form header(it is unbound as i explained before) of this homepage form, the DistrictID should appear in community subform under DistrictID(as there is a one to many relationship between district and community) .
For more clarification find the snap shot attached...
View 1 Replies
View Related
May 28, 2015
I have "LossForm" to record loss of inventory items due to damage, theft, etc. It has "Loss Subform" for input of multiple items. The row has a calculated field "TotalLoss" (from qty * itemcost). The footer of subform has unbound text field =Sum(nz([TotalLoss])). This all works fine. The problem I have is that I need to pass the total to another form. I want to have a pop-up form to use some of the field values from the Loss form. I have been able to pass all of the field values except for the TotalLoss.
LossForm Close Event: "DoCmd.OpenForm "Journal", , , , acFormAdd, , Me.LossID & ";" & Me.LossDate
pop up form:
Set frmPrevious = Screen.ActiveForm
Me.TransactionID = frmPrevious.LossID
Me.EntryType = "Loss"
Me.Date = frmPrevious.LossDate
{ Me.Amount = frmPrevious.TotalLoss doesn't work }
DoCmd.Save
End Sub
I also tried to setup a global, class, and module variable but keep getting error message of undefined variable.
View 2 Replies
View Related
Jun 6, 2013
I have one table containing name of restaurant with its address etc. Then i created another table to list out the restaurant workers names and details. Just as an example,
Table:Restaurant
Restaurant name
Address line 1
Address line 2
Restaurant #
Website
Table:StaffContact
Staff Role
Name
speciality
email
phone
I have the main form that has all the restaurant details only. And i have another form containing the Staff information. Please note the two table have a relation and it works well.
Now to make it user friendly(basically easier for the lazy ones), I dragged the staff contact form on to my main form and displayed it as a datasheet(basically a sub form).
Now, my boss does not want users to add/delete on this sub form(datasheet). So,he wants me to create buttons to open new record of staff for each restaurant(new form)
My issue is with opening a new record to enter a new person to the staff list and give them a role as well in form view.The new form has
So i ran a Macro, with open form with Where condition
Code:
[Staffcontact]![Rest Name]=[Forms]![MainForm]![RestaurantName]
But, it does not work .
View 2 Replies
View Related
Sep 8, 2014
I have a combo box field called "investigations" on a patient database which can allow multiple values. Each of its values represent the different investigations a patient can do. Now those investigations are tables and forms in the database. how can i program the database to simultaneously open these forms "on update" of that field-investigations?
View 1 Replies
View Related
