I have a continuous form in my database that depending on the criteria used will display any number of records. Each record has a check box so the user can select a record for printing. Quite often the user wants to select all of the checkboxes.
Is there a way to do that in vba off of a command button.
I have a continous form that contains text boxes, combo boxes and a check box. Upon clicking the check box, I have added code to disable the text and combo boxes on the corresponding row. However, when I click the check box, all rows are disabled (which is want I don't want).
Is there any way to only have the row, where the check box is checked, to be disable, and none of the other rows (where the check box is not checked)?
hi guys, i have a continuous form with a check box and a button on each record's row.
now if i dont bind the check box to a control source when you tick it, it gets ticked for each record, i am using the tick box to pass a state to the button ( uses an if statement ) so that it will done different things if it is ticked when the button is pressed.
can anyone help me to get this to work without having to bind the check box to a control source?
best regards
Working with Access 2000
I have a Continuous subform based on a query based on few linked tables.One of those tables has a Yes/No field which shows in the subform.
I want to be able to change the status of this field for each record independently, so I placed an unbound check box in the subform Detail section and a Command button on the subform Header section. However when I click one record check box, all of them change, I did not expect that. How do I move forward to get this done?
how can i make a image appear in my form when there is a check in the check box from the table?
View 14 Replies View RelatedI have a bound continuous tabular form,However, based on data content in one field of a record, I want a checkbox in the same record enabled, so the user can check it if necessary. I have created a record set using the form as shown below, and I am looping through each record. To show that my code is referring to the field with required data content, I display it as a message box and it works, yet my checkbox does not enable.
I have the code in the form_load event, however, for testing purposes I have it behind a button.If I am seeing this properly, the code behind the button enables the checkbox for ALL records once the criteria in the required field is true, and based on the last record, which has no data content, it disables the checkbox in ALL records. I also have the PK ID for each record hidden in the form. Can I utilize that to target the checkbox of each individual record??
Form Detail
-Form does not allow additions or deletions. Edits allowed
-All fields are disabled and locked
-I only want the check box to unlock if data is found in the "RequiredField" as referred to below. I have also tried if not isNull(requiredfield.value) then -enable checkbox, which yields the same results
Here is my code
Code:
Dim rstMyForm As DAO.Recordset
Set rstMyForm = Forms!MyForm.Form.Recordset
rstMyForm.MoveFirst
Do While Not rstMyForm.EOF
If Not RequiredField.Value = "" Then
[code]...
I want to use buttons on a form to change the sort order on a continuous form. In the buttons click event I am using a public function (named Sort_1) to change the sort order. The first element of the event call is the name of a generic query (named Sort_1_Query1) and the query field to sort (LAST_NAME OR FRIST_NAME, depending on the button.)This is the Click Statement.
=Sort_1("Sort_1_Query1","LAST_NAME")
This is the Public Function
Public Function Sort_1(SortName As String, FieldName1 As String)
DoCmd.ApplyFilter SortName, FieldName1 & "between 'A' and 'Z'"
End Function
I think the problem is in the use of quotation marks or trying to pass the query field name to the Do Command or the use of an ampersand.
I have a continuous form in which I put a command button for each record called "detail". I would like to click on the "detail" button and make it open another form containing all (and only) the info on this record.
At first I refused to use an "id" to link both forms, but finally I added the "id" in the table... however still does not work.
continuous form: "04 - GASTOS_BUSQUEDA"
id field on continuous form: "Gastid"
pop-up (details) form: "GASTOS_EDITAR"
id on pop-up (details) form: "editar_id"
This is what I have tried on the "click" properties of the "details" button field (called "btn_editgs"):
1)
DoCmd.OpenForm "GASTOS_EDITAR", acNormal, , "[editar_id] = " & Me.Gastid
2)
DoCmd.OpenForm "GASTOS_EDITAR", , , "[editar_id]=" & Me.Gastid
3)
stLinkCriteria = "[editar_id]=" & Me![Gastid]
DoCmd.OpenForm "GASTOS_EDITAR", , , stLinkCriteria
4)
Private Sub btn_editgs_Click()
On Error GoTo btn_editgs_Click_Err
Dim strWhere As String
strWhere = "[editar_id] = " & Me.Gastid
DoCmd.OpenForm "GASTOS_EDITAR", , , strWhere
btn_editgs_Click_Exit:
Exit Sub
btn_editgs_Click_Err:
MsgBox Error$
Resume btn_editgs_Click_Exit
End Sub
I have a continuous form that displays all my customers .I want to be able to dble click a customers ID and go to there customer details form.
View 14 Replies View RelatedHow to populate the parent form's PK to multiple records in a child subform set to a default view continuous form?
In other words, how to auto populate the primary key to multiple records displayed the subform?
I have a continuous form sfrmAddress which is based on my table tblAddressList. What I am trying to achieve concerns the date fields DateFrom and DateTo.
DateFrom is a bound text box txtDateFrom
I am trying to put an IIf function in the Control Source of unbound text box txtDateTo
=IIf([txtDateFrom]=[qryAddressHistory1]![LatestFromDate],Date(),[tblAddressList]![DateTo])
qryAddressHistory1 returns the LatestFromDate , so the most recent address.
The idea being if it is their most recent address, they have lived there until today, if it is not their most recent address it will display the date contained in the table (when they moved out or DateTo).
I have tried this a few different ways, double and triple checked my references and I'm usually OK with IIf so I don't understand where it's going wrong!
I should add I'm getting the #Name? error all the way down the column when I open the form.
I have the following code that is intended to use the three fields obtained from a record on a continuous form and display the details of the record on a single form. I have not used the findfirst method because I am having enormous problems with it. Instead I am defining a query based on the recordsource of the continuous form. This sql query gives one record as result and that record is to be used as recordsource by the single form.
Code:
Public Sub SboxSelectForm(ForName, ParName, QryName)
On Error GoTo NotFound
Debug.Print "SelectForm ForName="; ForName; " ParName="; ParName; " QryName="; QryName
Dim ResultQy As String, F As Form, P As Form
Dim db As DAO.Database
Dim Prsc As DAO.Recordset, Frsc As DAO.Recordset
[code]....
I have a listbox which contains a list of schools. I would like the user to be able to select 1 or all the records from that list box. From that list of selected records, my goal is to allow the user to use each school selected and use that as a record source for a continous form so I can allow the user to input a integer next to it, like school size.
Example:
Listbox (Schools)
ID, Name
1, Thomas School
2, Jefferson School
3, Washington School
4, Madison School
5, Franklink School
User select Thomas, Washington and Madison
In a Continuous Form it would list,
Thomas School, Text Box (Allow User to input School Size)
Washington School, Text Box (Allow User to input School Size)
Madison School, Text Box (Allow User to input School Size)
I then would save those records into a table.
use a continuous form to allow users to quickly enter any number of records. One of the fields in this continuous form is an ID (not a foreign key, actually not a key in the database but crucial for other purposes) which is incremental from the last one stored in a table.
I am able to use a combo box and a query to get the ID but I cannot save the value to the text box on the first record, and then requery and get the next id when the user moves onto the next record..and so forth..
I have a continuous Form named frmBirthdays that lists People with a [DateOfBirth] field.
In the Form Header I have 2 Unbound Combo Boxes 1- cboMonthFilter which list the 12 Months of the year in Text NOT Number and 2- CboAgeFilter that has a list of Ages 0 -30 (which is all i require) and a Clear Filter Command Button.
I would like to be able to filter the people list by cboMonthFilter for anyone that has a Birthday in any given month.
OR
I would also like to filter the people in the list by their age.
But never both at the same time.
I have a form I would like to sort by:
first - by App_Flag (a yes/no field) - have all the clients with "yes" on top
second - by App_Date - from the earliest to the latest
The query sorts it fine but the form does not - even if I requery the form (added a requery button).
Can a macro or coding make it sort it the way I need it?
I have a continuous form with a number of unbound fields and bound fields. However, I would like to sum an unbound fields (Text28). Text28 is an unbound calculated field based on another calculated unbound field (Text22). I would like to sum Text28 in the footer or somewhere in the form.
Here are the codes for my field:
Code:
Text28 = iff([Text22>0], [Text22], [Text20] --- This works
Text29 =sum(iff([Text22>0], [Text22], [Text20]) --- this is not working
and it did not work.
I have three tables (Group, Customer, Savings).
Every member of a group do savings once every 15 days and each group has maximum 20 members, group has one to many relationship with customer and customer having one to many relationship with Savings (there is no direct relationship between group and savings) i have created a continuous form for saving entry. in this form i select a group which is unbound and based on that group, its members are listed in the combo box named CusID, after selecting customer other saving details are entered.
What I want, is that for every group i want a total saving for all that specific group's members selected in the mentioned unbound combo box in that continuous form, this total should be based on the group selected in the mentioned unbound combo box, in case i select another group the total should also be based on newly selected group.
I have a continuous form that I need to appear as a datasheet (one record per row). The data fields are "locked" to the left edge of the form. How do I free them for realignment inot a row (instead of a stack)?
View 4 Replies View RelatedOn a continuous form, I would like the user will add a new record via button click instead of popping open a blank record at all times. With AllowAdditions set to False on Form load, and turning it back on button click I can get a new record added. I am having trouble determining where to turn it back off. After Insert - doesn't seem to delete the blank row until I move to the blank row, so this doesn't accomplish what I am looking for.
AfterUpdate (for each field on continuous form) - this did what I wanted, but I was only able to update one field on the form for the new record. The combo boxes then were viewable, but I could not make a selection.
combo boxes and continuous forms.I have a continuous form (works great), with two combo boxes that navigate (rather than limit/ filter the list) to the desired selection.One for suburb and one for postcode.
I have expanded the select criteria for the suburb to include postcode as some suburb names are used in more than one state. (I do not want to have to select a state, then suburb).I changed the column count to see the postcode next to the suburb, however when the selection is made only the first instance is selected.
Example.
Epping 2121
Epping 3076
If I chose Epping 3076, Epping 2121 is selected and the continuous form navigates to that suburb (rather than the one with 3076).Can I change this so that I can still search by postcode, or search by suburb and have the form navigate to the corrected suburb postcode combination?
Is there any way to identify the Top row in a continuous view form?This changes of course as you scroll down. What I'm thinking of doing is a page jump page forward, or back. The form is based on a query and has a line number field, but I can't figure outhow to get at it in code.
View 4 Replies View RelatedI am in Access 2010 and on a continuous form I am getting alternating light and dark bands on the background of the form. How do I turn that off?
View 4 Replies View RelatedI have a Continuous form that is used to place orders in my Purchase order Database. I have a combo box with a Textbox over laid, so the users can type in the Textbox and it filters the combo box as they type. This is to search Nominal ledger codes that the current user has set up.
This has been working fine, but now finding issues as people have 400+ Nominal coeds set up. So there is a lag when the user is typing.Is there a better way of doing this? i have a similar setup to search a supplier but this is not a continuous form and the majority of objects are un bound.
Code:
Private Sub lstSelect_AfterUpdate()
Me.lstSelect.RowSource = "qryCurrentNominalNew"
End Sub
Private Sub lstSelect_BeforeUpdate(Cancel As Integer)
Me.lstSelect.RowSource = "qryCurrentNominalNew"
End Sub
[code]...
I wish having only one record display in a continuous form, after an "On Click" event. The database in which this question lies is attached.
On opening, the user first interacts with Table 1 (Continuous Form), then by clicking on ID on the details for that particular record appear.
What I would like to do is: When the user clicks on ID, only that record whose ID has been clicked on displays first on the continuous form, and then the PERSONAL form opens. To clarify further, my wish is that the sequence of events is:
User Opens Table 1 Form
User Clicks on ID (for example, let's take 2)
Only Record with ID 2 remains on the Continuous form.
Then details for record 2 display on the Personal Form that opens next.
The problem I currently have is with step number 3 above.
I have a continuous form with unbound controls. These controls write new records into a table using rec.addnew
If possible, I would like for the user to only be able to add/edit the new record only and not to edit the continuous form below. When I turn off edits on the form, I only get the new record to show. I found some pages that reference using code like .allowAdditons, .allowEdits and .allowDeletions but unsure of how to implement them since I have more than one control the user is entering data into. I also found another site that says to use a control to determine if the record is writable to: I do have a control that is set to =Date() on the default value.