Forms :: Check For Duplicates Based On Name
Aug 7, 2015
I have a form (MemberDetails) and I want it to check if the member I'm adding has already been added, or at least give me a warning that the member might be a duplicate. I have a FName field and LName field that I would like checked (together). I know it's possible because I've seen it done on the Address Book template, but they have it set up to where the First & Last name are saved as one field in another table.
Expression used in the template, here it is.
=IIf(DCount("*","[Contacts Extended]","[ENV_NUM]<>" & Nz([ENV_NUM],0) & " And [Contact Name] = '" & Replace(Nz([Contact Name]),"'","''") & "'")>0,"Possible Duplicate","")
View Replies
ADVERTISEMENT
Apr 2, 2013
I have a form which im using to store records about companies that I have mailings with. The company name is my unique field as no two companies should have the same name. This form is accessed by several different people and data is input so I dont want duplicates of the company name being produced. Currently, the form wont save a record if it is duplicated but by then I would have filled out the entire form and wasted my time. Is there a way to do the following:
As I enter the company name it would look up exisitng company names. eg if i wanted to enter a new company called 'Dans Plumbing', I would type 'D' and below the text box would display a load of existing records starting with D. after that when I type 'Da' it would only display records starting with Da and so on. All being well, when I have finished typing the company name there should be nothing underneath so that I instantly know its not a duplicate and vice versa.
The possible duplicate doesn't have to be underneath it could auto complete IN the text box a bit like the address bar on a web browser.
View 4 Replies
View Related
May 6, 2014
On a form I am making, I have two combo boxes. Box 1 has "Title" and Box 2 has "Full Name". In the table associated with FullName, there is a Check Box name "Still Attached".
What I am trying to do when choosing a "Title" in Combo Box 1, I would like only the people with that "Title" and a check in "Still Attached" to be available in the drop down list.
I have tried and I can get combo 2 to filter by title, but not by the "Still Attached" value.
View 11 Replies
View Related
Feb 14, 2006
Hello everyone,
This is code with which I choose records from one table and I put them to another table (OdabranaOprema),
can I add code with which I can stop choosing the same record twice?
I would like in that case have possibility to change the quantity of the record which is selected twice,
thanks
Private Sub cmdOdaberi_Click()
On Error GoTo Handler
Dim strRedak As String
Dim strOdabranaReferenca As String
Dim rsPonudjenaOprema As Recordset
Dim rsOdabranaOprema As Recordset
Dim db As Database
Dim intRedak As Integer
Dim strSQL As String
Dim strSQLOdabir As String
txtNapajanje.SetFocus
Set db = CurrentDb
strSQL = " SELECT Napajanje.Referenca As Referenca, Napajanje.Opis as Opis, Napajanje.Visina " & _
" FROM Napajanje " & _
" WHERE (((Napajanje.PickFlag)= True))"
strSQLOdabir = "Select OdabranaOprema.Referenca, OdabranaOprema.Opis, OdabranaOprema.Kolicina, OdabranaOPrema.Visina " & _
"From OdabranaOprema"
Set rsPonudjenaOprema = db.OpenRecordset(strSQL, dbOpenSnapshot, dbReadOnly)
Set rsOdabranaOprema = db.OpenRecordset(strSQLOdabir)
Do Until rsPonudjenaOprema.EOF
txtNapajanje.SetFocus
rsOdabranaOprema.AddNew
rsOdabranaOprema.Fields("Referenca").Value = rsPonudjenaOprema.Fields("Referenca").Value
rsOdabranaOprema.Fields("Opis").Value = rsPonudjenaOprema.Fields("Opis").Value
rsOdabranaOprema.Fields("Visina").Value = rsPonudjenaOprema.Fields("Visina").Value
rsOdabranaOprema.Fields("Kolicina").Value = txtNapajanje.Value
rsPonudjenaOprema.MoveNext
rsOdabranaOprema.Update
Loop
Set rsPonudjenaOprema = Nothing
Set rsOdabranaOprema = Nothing
Set db = Nothing
Handler:
Izlaz:
End Sub
View 1 Replies
View Related
Feb 6, 2006
I have a database called "Main" containing customer details and interactions.
One of the fields is the "Customer Number", whilst I know I can index the field to stop duplicates, is there a way to check for duplicates when entering the customer numbers into the form and display a warning message as opposed to just rejecting the entry? There are occassions I need to create multiple entries but would like to be notified.
Here's hoping....:confused:
View 3 Replies
View Related
Sep 10, 2014
Is it possible to have a query that will requery value of a check box based on which check box is selected? I have a form that has 5 check boxes and a text field for populating a unit price. When someone clicks a specific check box, the text field should display the unit price. I know how to accomplish this using a combo box and don't want to change the form to setup for a combo box, but rather use what everyone is currently used to. I want to add the check box is from 1 table linked to a form and the unit price is from another table not linked to a form. Both tables have 2 fields in each that will relate.
View 6 Replies
View Related
Jun 28, 2015
I have a form with 22 subforms (in about 11 tabs). Each one of these subforms has a controlling field in the main form (table) that dictates if the associated subform needs to comply with data entry rules or not.
For example:
Field in main form cboMed (Yes; No)
Subform: frmSubMeds has a list of medications
I want to be able to loop through all the records of the subform and determine if they are complete.
This check is run from a command button; that should also consider the value in the combo box. i.e. Check only if the combo has a value of "Yes"
Since i have 22 subforms and have to run the check on everyone of them, i have used the tag property to check if the record is blank or not. This is what i have so far
Code:
For Each ctl In Me.Controls
Select Case ctl.Properties("ControlType")
Case acSubform ' only look for subforms
If ctl.Enabled Then
If Not (IsNull(ctl.Properties("SourceObject"))) Then 'if it is a subform type
[Code] ....
The problem with this is that it only looks for the selected record in the subform and doesnt look for ALL the records.
View 5 Replies
View Related
Jun 17, 2015
im trying to enable/disable checkboxes based on a combobox selection for instance,
i make the selection in a combo box called terms and conditions. i want it then to only enable the business,domestic and summary check boxes for that type, with the onther check boxes staying disabled. is there a way this can be done through code like the statement "only enable if this letter type selection has been selected"
View 14 Replies
View Related
Mar 1, 2015
I have a parent form and connected to it is a subform. On the parent form I have a checkbox which enables and disables fields on the parent form and also hides the subform.
What I want to do is when the user unchecks the checkbox, this action also deletes the associated subform records, if there are any.I'm sure that this can be done with an SQL Delete query in VBA.
View 5 Replies
View Related
Aug 8, 2005
hi, I have 2 Tables: tablea & tableb. The field names in both tables are: user_id, firstname, lastname, from these i have 2 querys (querya & queryb) both of which just look at the fields from the repective tables, & from this i have 1 form (entry form) that pics up the fields from querya. I would like to be able to enter details (records) into the entry form which puts all the data into tablea then automatically copies all the information into tableb, then automatically checks to make sure there are no duplicate records in tableb and finally deletes all the records out of tablea (probably after the form closes). This might sound a bit strange why i want to do this but I hope if its possible it could be used in a larger database.
I think i need to do querys but not sure what I need to do, Any advise would be very helpful.
View 3 Replies
View Related
Nov 28, 2007
I want to insert data into a table where a symbol does not already exist for that date. I am not sure what i am doing anymore :( So please help me verify that this won't insert duplicates? Am i using the correct logic? :confused:
"INSERT INTO StocksData (Symbol, [Security Name], [Market Category], " & _
"[Reg SHO Threshold Flag], FileDate) " & _
"SELECT DISTINCT Symbol, [Security Name], [Market Category], " & _
"[Reg SHO Threshold Flag], '" & fileDate & "'" & _
"FROM " & sTableName & _
" WHERE ((Symbol Not In (select Symbol from StocksData)) AND (" & _
fileDate & " Not In (select FileDate from StocksData)));"
View 3 Replies
View Related
Aug 15, 2014
I am using the following code to check for duplicate tickets when importing multiple records into a datasheet view form by using the paste append function.
Code:
Private Sub Ticket_Number_BeforeUpdate(Cancel As Integer)
DoCmd.SetWarnings False
If DLookup("Ticket_Number", "Record_Store", "Ticket_Number= '" & Me.Ticket_Number.Value & "'") > 0 Then
Cancel = True
MsgBox "There were import errors, please open View Import Errors above."
End If
End Sub
The form is used to insert multiple records into the database at a single time.
That codes works to check for duplicates. And if there are none there are no popup messages.
If there are duplicates though it gives a popup for every single Ticket_Number that is a duplicate.
I am wondering if there is a way for it to give only a single popup once it completes checking all the records to be imported for duplicates.
View 14 Replies
View Related
Aug 20, 2007
Ok.. I have been racking my brain for hours trying to figure out how to do this. Maybe someone here can help me figure this out.
I have 2 tables. "AR94" & "RPIN"
I need a query to look at the "Provider_PIN" field of both tables in order to find duplicates between that field in both separate tables at which point I need it to say If a duplicate provider_pin exists in the AR94 table & the RPIN table Then remove that provider_pin from the "RPIN" table.
The final result should be that the only records showing in the "RPIN" table would be those provider_pins' that were NOT found in both tables.
Starting Example (Before query):
AR94 Table:
-----------
1234
12345
123456
1234567
12345678
RPIN Table:
-----------
1234
4567
45678
12345678
456789
Results that should be achieved (after running query):
RPIN Table:
4567
45678
456789
Thereby deleting the 1234 & 12345678 values from the RPIN table leaving only records that were NOT found in both tables.
Please help me as I am trying to get this done for a project and can't figure it out..:confused: Thanks.
View 7 Replies
View Related
Aug 27, 2013
want my query to count only records that are not duplicated based on a set of criteria.I have a table with customer IDs and Call dates and the employee ID. I want a count of the call dates for each customer ID for each employee. However I only want to count as one occurrence if multiple calls happened on the same day. For example
Cust_ID Call_Dt
12315 8/1/2013
12315 8/1/2013
12315 8/1/2013
14253 9/1/2013
Customer ID 12315 would only count a 1 call entry instead of 3 for the date of 8/1/2013
View 3 Replies
View Related
Dec 23, 2014
I've been playing around with a new database design and ran into a possible 'error' that I would like to avoid.
It's going to be a payroll database to store time codes for hours spent working on specific projects. I have been struggling on how to put this together to fit with what we've been doing for years and I think I hit a few breakthroughs this morning.
However I want to avoid this error of possible duplication of entry.
Simple table set up - primary key is just a running integer; Employee ID; and Week Ending Date.
I can have multiple week ending dates for a specific employee; but I want to avoid having the same employee with the same week ending date. I cannot set up either field as being unique.
Quick run of data that would be in this table:
Code:
1 ABC 11/21/2014
2 ABC 11/27/2014
3 ABC 12/07/2014
4 DEF 11/21/2014
5 DEF 11/27/2014
6 DEF 12/07/2014
7 ABC 11/27/2014
in this example, when the last row is entered I need to get a popup or some warning that this time has already been entered.
View 13 Replies
View Related
May 14, 2015
I have a query that displays this
Column1 Column 2 Column 3 Column 4
TripTitleA TravelerA N/A N/A
TripTItleB TravelerB N/A N/A
TripTitleC TravelerC TravelerD TravelerE
TripTitleC TravelerD TravelerC TravelerE
TripTItleC TravelerE TravelerC TravelerD
TripTitleD TravelerF N/A N/A
I want to filter Column1 to have no duplicates so it looks like this
Column1 Column 2 Column 3 Column 4
TripTitleA TravelerA N/A N/A
TripTItleB TravelerB N/A N/A
TripTitleC TravelerC TravelerD TravelerE
TripTitleD TravelerF N/A N/A
Is this possible?
View 1 Replies
View Related
Jun 26, 2014
how can i make a image appear in my form when there is a check in the check box from the table?
View 14 Replies
View Related
Jun 14, 2006
When a part number is set up in our manufacturing software, the user clicks a check box to mark the part as purchased. I'm creating a similar form and want to have a check box display the same information. The manufacturing database stores the check box as Y when checked and N when not checked.
I tried 2 different ways to add code in the BeforeUpdate but neither is working.
First Example:
if Purchased = "Y" then check295 = True
else checkbox295 = False
Second Example
If Purchased = "Y" then check295 = -1
else checkbox295 = 0
What changes do I need to make to this code to get it to work? Thanks for your help,
Jeff
View 2 Replies
View Related
Aug 13, 2015
I have a report that pulls a date from a query, but they'd like an option where if they don't want to enter the date, they can check one of 2 checkboxes. Check box 1 would return "N/A" and checkbox 2 would return "TBD.I've never had to do anything with more than 1 checkbox.
View 5 Replies
View Related
Nov 18, 2004
I have a table(Product Change) with these fields:
Tracking Number
Approved (a check box)
Engineering (text box that represents department)
Purchasing (text box that represents department)
Quality (text box that represents department)
Production (text box that represents department)
Customer Service (text box that represents department)
I want my query results to show all records that have the "Approved" check box...checked, and then only the records that have one of the Department fields with a null value.
So I'm looking to see only records that are "Approved" and out of those....only the records with at least one department field empty(Null).
Any help doing this is SQL view would be great...or even design view.
View 2 Replies
View Related
Sep 16, 2012
I have an access database that has 10 items that can be checked if a certain criterea is met. I need a way to generate an email that inserts a sentence relating to each checked box if that box is checked.
View 4 Replies
View Related
Feb 12, 2008
Hi this is my first post... so hi all :)
ok what i have is a table with contact details 900k plus
there are about 90k of which are duplicates.
this is the basic feilds that are important in this case.
Id, data_source, data_recived, data_code,
what i want is to have a table with unique records (no dups in data_code)
this table will look like this...
Id, data_code, Num_dups, dup1_source, dup1_date, daysbtw_Dup1_dup2, dup2_source, dup2_date, daysbtw_Dup2_dup3 ,dup3_source, dup3_date, daysbtw_Dup3_dup4 ,dup4_source, dup4_date,
I know there is no more than 4 dups of each record.
what i want from this is a table that will give me a record of how many dups for each record then all the dates that they were added and the date between each record entry.
if anyone can help it would be great .
thanks in advance.
View 6 Replies
View Related
Feb 22, 2006
Hi.
I have
Form with 3 list boxes.
1st LB populates 2nd etc.
The 3rd LB value chooses a field.
The Fieldname Table has field "Field Type"
I want to change the Text box next to the List box to this entry in the Db.
Ie. If I choose a field in the LB, say "Done?", then to update that field it needs to offer me a "yes/no" field type
Therefore it changes the TextBox to a Checkbox (or combo with Yes and No as options)
Any ideas?
View 2 Replies
View Related
Dec 22, 2014
I'm trying to find a code that will allow me to check a value of a yes/no checkbox based on a username.
What I want to happpen is:
1. The code looks to see if the username that is entered in "txtUsername" field on the form matches the "empUsername" value on the table "tblUsers."
2. If there is a match, I want it to look at the value for the field "Admin" on "tblUsers" to see if the value is checked as true.
3. If the value is true, I want it to open a specific form "frmAdmin." If it is false, I want it to open a form "frmMain."
VBA codes not recognizing the Admin field and instead taking all users into the frmMain.
View 3 Replies
View Related
May 28, 2013
I have a report with many columns in the detail listing data, and their associated titles above in the page header.What I would like to accomplish is the ability for the user to check boxes off on a form which will remove/add specific columns to the report. The form will essentially be a "build your report" style, with a button on it opening the print preview of the custom report.
Im assuming this is accomplished by the "on load" part of the form through VBA. How is the sizing handled? If the user un-check's a box to remove a column of data, how is the header and detail data "moved over" or re-arranged to accomplish a relatively decent looking layout? Any example or example code to deal with one column/setup (which I can copy and modified)??
View 4 Replies
View Related
Jun 19, 2014
I have a form with a check box. A query is run that looks at that check box and decides what the criteria are based on that. So, if the check box is checked, it should pull in all data in the field that is a Y. If it is not checked, i want it to pull all data (Y's and N's and blanks).
here is my criteria:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","*")
This does not seem to work. I have also tried:
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y",Like "*")
IIf([Forms]![frm_Query_Form]![CheckBox]<>0,"Y","like "*"")
View 14 Replies
View Related
