Forms :: Checking For A Filtered Duplicate Value On A Form Before Closing
Apr 11, 2014
Below is some code that I'm struggling with and I get an error message "Type Mismatch".
Description: The database contains multiple projects and the subset of each project is a release. The "PublishedNumber" can't be a duplicate within a release, but it can be a duplicate within the table where the data is stored. There can however be multiple occurrences of 0.
Here's my code:
Dim stLinkCriteriaRelease As String
Dim stLinkPublishedNumber As String
Dim DuplicateNumber As Variant
stLinkCriteriaRelease = "[AssociatedRelease]=" & [AssociatedRelease]
stLinkPublishedNumber = "[PublishedNumber]=" & [PublishedNumber]
[Code] ....
View Replies
ADVERTISEMENT
Jan 29, 2014
I am looking to check 3 sub forms for values and if they contain any then delete them. After a bit of googling I discovered that you should use recordset.recordcount - to which I tried but I get method or data not found - is this a valid method?
My code to which Im using is:
If Me.NoneChargeable_Admin_subform.Recordset.RecordCount >= 1 And Me.NoneChargeable_Manufact_subform.Recordset.RecordCount >= 1 And Me.NoneChargeable_Research_subform.Recordset.RecordCount >= 1 Then
DoCmd.RunSQL "DELETE NoneChargeable_Admin.*, NoneChargeable_Manufact.*, NoneChargeable_Research.* " & vbCrLf & _
"FROM NoneChargeable_Admin, NoneChargeable_Manufact, NoneChargeable_Research;"
End If
DoCmd.Close acForm, "NoneChargeableHrs_frm", acSaveNo
End Sub
View 1 Replies
View Related
May 10, 2005
Hi,
I have a form in a database for our products (doors). I have a button that duplicates one of these records (all new products are based on standard template records).
When this record is created a new product number is produced by the system which was the number of the original (template) record plus the customer enquiry number.
I want to be able to warn the user if they are trying to save this newly created record with a product number that already exists so that they can alter the number to be unique. It will also warn them if they re-number an existing record to another already existing product number. Since the field is defined as unique, at present the system says absolutely nothing and just doesn't save the newly created record which seems is a touch annoying!
I have tried several things with dlookup, dcount arguments but can't seem to get anything to work.
Hopefully someone here can point me in the right direction?
Thanks in advance
John
View 2 Replies
View Related
Jan 31, 2006
I have a form in which new equipment is added. I want to be able to check when the ID number is added (first field on the form) that there is not a duplicate ID number. If I wait till the end of the form and save, then Access tells me that there is a duplicate present but by then I have spent time putting in all the rest of the data.
If have added this code in the before update section for the relevent field, but it doesn't seem to work. Can someone please help clarify or suggest an easier way
Dim IntIDCheck as integer
Dim Response
IntIDCheck = DCount("[EquipmentID]","Equipment Inventory","[EquipmentID] =" & Me.EquipmentID)
if IntIDCheck > 0 then
Response = MsgBox ("Duplicate Present")
Me.EquipmentID.SetFocus
Cancel = True
Exit Sub
End if
Thanks
View 2 Replies
View Related
Dec 28, 2006
Hello,
I'm new to using VBA for MS Access. May I enlist your help, Please.
I'm working on a human resources database for a group of employees. I'm trying to automate their login process after they have opened the database so that each employee's privacy is respected. Using an initial form, employees are separated into "New User" or "Returning User". My problem concerns setting up the "New User" in the database.
The New User is directed to form "frm_NU". The form has several unbound fields which are later carried to the table "tbl_Employees". Two of the fields on the form are used to create the EmployeeID. Those are Initials [INI] and Phone Extension [EXT]. The EmployeeID will be used in a filter so that only that employee's information is made available to the user (simulated Privacy).
Because the employees are unfamiliar with MS Access and its cryptic error messages, I need to create a message box which will give a plain English warning when a user attempts to use an existing ID to create a new record. [EmployeeID] is a field in the table. it is set as a key and does not allow duplicates.
When a new user enters his/her initials and phone extension I want the new ID to be compared to the table and if found, a message should appear. This is a preemptive strike to prevent the user from getting to the more cryptic MS Access error message.
I've tried using Dlookup and Dcount to try to pass some meaningful data to the If statement variable VarX to trigger the message box; assuming that Varx should be something other than Null or Empty
Dim EmpID As Variant
Dim VarX As Variant
EmpID = [INI] & [EXT]
VarX = DLookup([EmployeeID], "qry_Employees", [EmployeeID] = [EmpID])
If VarX <Is Not Empty> Then
X = MsgBox("Another record already exists by that name", vbOKOnly)
Else
Y = MsgBox("Passed", vbOKOnly)
End If
I keep getting an error at the DLookup formula or DCount formula saying: Run-time error; 2001 You canceled the previous operation. It also appears that the DLookup never looks up anything nor does DCount count anything even though I'm purposely entering duplicate information which exists in "qry_Employees". I was expecting VarX to be either the duplicate ID or a record number or record count or something.
Any ideas or constructive suggestions?
Thanks,
Goh
View 4 Replies
View Related
Jun 29, 2013
What would be the Access 2007 VBA code for checking for duplicate records?
View 14 Replies
View Related
Jun 15, 2013
I'm using Access 2013. I want to check duplicate data. I have a form where from insert data into table but before insertion I want check multiple criteria with form. How can I do this
Field are:
BatchID
BillNum
CIH
IH
back end form code is:
Private Sub cmdCheck_Click()
Dim criteria As String
criteria = "[BatchID]=" & Me.cboBatchID & " AND [BillNum]=" & Me.txtBillNum & " AND [CIH]=" & Me.txtCIH & " AND [IH]=" & Me.txtIH & ""
[Code] ....
Finally I'm getting this error: Run Time Error 3075 Syntax Error Missing Operator in qry Expr.
View 3 Replies
View Related
Apr 6, 2015
I've got an attendance form set up with check boxes for each day I want to check attendance. I have two problems with this form.
1) All the boxes start out with little squares (I want them to be blank)
2) If I try checking a box for one person, it checks all the boxes in the column (same with unchecking).
View 3 Replies
View Related
Aug 14, 2013
I have a Listbox on a fprm which has a button attached to it, the button allows you select one of the items in the listbox and append it to a table. the problem is that it currently allows you to add the item as many times as you like. How can I check for duplicates?
Code:
Private Sub CmdAdd_Click()
'Add new record to tblShootingTasks
strSQL = "INSERT INTO tblShootingTasks ( ShootID, ContactName, Task ) " _
& "SELECT [Forms]![frmTasks]![ShootDateiD] AS ShootID, [Forms]![frmTasks]![Combo15] AS ContactName, [Forms]![frmTasks]![Frame17] AS Task;"
DoCmd.SetWarnings False
DoCmd.RunSQL strSQL
End Sub
View 14 Replies
View Related
May 14, 2015
I filter my table with a query - where the Invoiced Date is NULL. In the vba ADD RECORDS code I may INSERT new records which should then also appear - but are not showing up. The records ARE added to the table, but don't show up unless I close the form and reload it and then the query filter picks up the added records.
View 5 Replies
View Related
Jan 7, 2015
I am developing a form where students have to enter their ID number but I want my form to check through a table of students and their IDs and flag up if the ID number does not exist in the table.
View 10 Replies
View Related
Oct 23, 2014
I want a form which allows data entry into a main table but also displays a list of records filtered from the same table. There is also an additional, calculated field displayed with the list.
The filter criteria are a date and a name, a list of which are in a separate table.They are separate fields for first and last name but i would like to filter with both and display them concatenated in the list.
View 6 Replies
View Related
Apr 9, 2014
I'm trying to open a form with filtered criteria using this code:
Code:
DoCmd.OpenForm "Edit_Mission", acNormal, , "[Report_Date]=# " & Format(Me.Date, "dd/mm/yyyy") & "# And [Supporter_Name]='" & Me.Supporter & "'"
it used to work on access 2010 but now on access 2013 I get a blank form.
View 2 Replies
View Related
Nov 25, 2014
I want to open a report with the results from a filtered form.
I want to use a similar format to the attached Allene Browne search2000 as the base to filter the records initially, but not sure how to get the filtered results into a report and the most efficient way.
View 8 Replies
View Related
Sep 13, 2013
I have a form that displays records from a table.
When opened it displays all records (no selection yet).
I put would like to put 2 buttons to filter records (Male/Female).
I'm thinking of 2 possible options:
1-on click run a script that will close current form, then reopen it with selection criteria
2-directly apply a filter on the current form that would automatically refresh itself with the right records
Another (heavy, inelegant?) solution would be to create duplicates of this form. they would be loaded from separate queries that select the right records in either choice.
View 4 Replies
View Related
May 6, 2013
I have faced with a problem while i was filtering my main form.....my problem is when i filter the main or parent form the related sub-form also gets filtered how to manage the main form so that when i filter it the sub-form should not be filtered so that i can get the related record to my filtered one in the sub-form... as for the time being when i filter the main form the related record in the sub-form is not shown and when i press unfiltered on the sub-form its data gets appeared....
View 11 Replies
View Related
Dec 24, 2014
I have created a form with buttons which runs queries. The parameters I need for the query are being passed through just as I wish and the relevant query is run correctly. However, if I then press the button on the form with different parameters I get the results from the previous query. I can only solve this by closing the query before pressing the button. Is there an easy way to close the query to prevent this from happening. In case this is relevant, the only data which I am returning from the query is stored in the windows clipboard.
View 6 Replies
View Related
Jul 8, 2014
I have a form with a subform. There is a close button on the main form which I have applied a key command of Alt + c and when the focus is on the main form it closes the form as you expect. But if the focus is on the subform, using Alt+c does nothing. I am trying to give the user a way to avoid using the mouse (so they do not have to click on the button from the subform. Also it is confusing that the key command doesn't always work in the view of the user, and in reality he is on the subform.)
So my thinking is:
1. Can I create a close button on the subform (and give it the key command of Alt + c) and in the code close the form and subform, if so - how to I refer to the form/subform?
2. Is there some way to apply the key command of Alt + c on the subform to activate the close button on the main form?
View 4 Replies
View Related
Mar 14, 2013
I am using Access 2010 - Version 14.0.61.29.5000 (32-bit)
I am building a custom Export Wizard to export data to Excel using the Report Wizard for the basic ideas.
All I am trying to do is have a [Back] button on a form to open another form and close the current form.
Private Sub cmdBack_Click()
DoCmd.OpenForm "frm_ExportWizardPage2", , , , , , Nz(Me.OpenArgs)
DoCmd.Close acForm, "frm_ExportWizardPage3"
End Sub
The new form is opening but then the current form is not closing. All forms are the same size, shape and positioned centrally although this should not make any difference.
Could this be anything to do with which form has the focus when I open the new form?
View 2 Replies
View Related
Feb 4, 2014
I have a bound form with a few fields. I would like to run a sub after some of these fields are modified, but not others. I would like it to run only once, after user finishes his work on the form.
When using the Unload event - the form on the form is not there anymore (or did I get something wrong?).
Is there a way to trap Data on form just before the form closes?
View 4 Replies
View Related
Oct 18, 2014
I'm constructing a database to record appointments. I want my users to input their appointments on one half of a form (I can manage that bit) but on the other half I want them to be able to see a list of the appointments they already have booked that day (with any patient) or what the patients already have booked that day (with themselves and any other therapists).
The appointment fields they will need to see are:
start time
end time
patient/therapist (depending on if they are viewing their own or the chosen patients' appointments
type of appointment (physiotherapy etc)
location
The date won't need to be seen but will dictate which day's appointments are listed.
At it's simplest I could get away with a list of the day's appointments for the patient and date the therapist has typed into the form to start the record.
Ideally I'd like them to be able to choose whether to see a list of the patient's appointments for that day or their own. If there's room I would display both.
Here's the final, 'moon-on-a-stick' bit... it would be great if I could show the appointments in time slots rather than just as a list. From what I can tell that's quite tricky to pull off but i thought I would ask anyway...
At the moment I don't even know what keywords to look up - is this 'embedding a report in a form' or 'inserting a filtered list' and so on.
View 1 Replies
View Related
Oct 9, 2013
I have an A2007 application running on XP. From main form, Form1, another form, Form2, is opened.
When I attempt to close the application by clicking in the cross in the rh-corner of Access window, I get a crash midway through the OnLoad of Form2. I cannot figure out why the heck the On Load event fires when the form is being closed, and have some difficulties stepping through the code.
I recall having heard of OnLoad firing when trying to close a Form.
View 6 Replies
View Related
Jul 9, 2013
I have a form (frmAuditEntry) that includes a subform (sfrmAuditDetail). The user will enter audit information on the subform. There is a check box on the subform to identify containers that had errors in selection. When the box is check by the user, a pop up form opens where the user can enter the details regarding the type of error. The audit number and the container ID are carried over from the main form to the pop up form to link the information.
This is the code I have in the AfterUpdate event of the checkbox:
Private Sub Errors_AfterUpdate()
Dim rs As Object
Dim strBookmark As String
strBookmark = Me.ContainerID
Me.Requery
[Code] ....
This works great and keeps the focus on the record the user checked having errors so the right information transfers tot he pop up form fields. When the pop up form is closed, the focus goes back to the subform but keeps the focus on the container ID control of the record that the user previously checked as having errors (hope that makes sense).
What I would like to happen is this: When the pop up form is closed, I want the focus to go back to the subform but to go to the last blank record on the subform (if the user moved off the record before checking the error checkbox) or go to a new record (if the user did not move to a new record already before checking the error checkbox).
View 1 Replies
View Related
Apr 14, 2014
I have two ways to enter work placements for students, I need to refresh a subform on one form while closing another.
The issue here is the form with the subform may not be open as mentioned above.
So is it possible on closing one form to refresh a subform only if it's parent form is currently open?
View 1 Replies
View Related
Jun 15, 2014
I have a popup called by a subform to add a new record or edit a selected record. I keep getting "Runtime error 32502". The value you entered isn't valid for the field "|"
I have no required fields and all the drop down related fields have the right value type in them (That I can find)The only "|" reference I can find is in the OpenArgs content below when I load the form. If I'm adding a new record I pass two fileds via the OpenArgs
Private Sub Command52_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", , , , acFormAdd, OpenArgs:=Me![DebtorId] & "|" & Me![MatterId]
End Sub
or if I'm modifying a record from the subform on click I
Private Sub Text38_Click()
DoCmd.OpenForm "AddDebtorPaymentFrm", acNormal, , "[Transactions].[TransId] = " & Me.TransId, acFormEdit
End Sub
Below is the Popup Load code
Private Sub Form_Load()
If Me.DataEntry = True Then
Me.VariableHeading = "Add A Debtor Payment"
[code]....
View 8 Replies
View Related
Sep 12, 2013
I have a search form (Form1) that sends the results to another form (Form2) using OpenArgs.
When Form2 opens with the filtered records, it may display 1 or more records (for example, the order number searched for in Form1, the customer may have bought 2 items)
So with my 2 records displayed in my continuous Form2, I have included a bound check box that can be checked by a sales team member of staff if we need to send a replacement item(s).
If the sales person has started the process and checked the box for both records but decides to close the form instead of reordering the goods for the customer (hometime) and decides to Close Form2.
How do I program Access to uncheck both boxes so the table is not updated with the check for each of the items, as this will start a chain reaction and the goods will get packed and shipped. It currently just unchecks the first record if I include Me.ItemSelectedResend = False in the Close form vba code.
I thought about just including a message box on the screen prompting the user to uncheck the boxes before closing, but surely there must be an automatic way in which I can do it.
View 1 Replies
View Related
