I am using my form to add job descriptions and if the user checks the check box for current, it adds the description to the table as the current job description. I need to clear the check box for the next entry but the box retains the choice so when the user selects another description, the form saves it as current even if the box shows no check in the box. I tried the code below, but that only changes the state of the box, but not the reality of the state of the box.
I'm completely new to Access and would greatly appreciate your help in this problem.
I have a form name frmDataEntry with 10 fields, which enters data through an append query in Access. Firstly I was wondering whether I could do mutiple data entries, say 5 different entries of 10 fields each at the same time? Secondly, I wanted the form to clear all the entries after the user has submitted the data(I have made a submit button for this). I would greatly appreciate it if you could help me overcome these problems.
In that form I would like to have different check-boxes (three of them), representing actions done that day.
Let's say each form represents a contact, and I need check-boxes for:
- Called - E-mailed - Visited
This is something I am now able to do. But.... I would like these check-boxes to be cleared automatically the next day.
So when the database is opened the next day, these check-boxes start unchecked.
And I would also like that as soon I check a check-box on a certain day, there is an entry for that action and date is being entered in the record of that contact, so I am able to check later on what day, what action was performed.
Im doing an attendance in Access database , i have a Staff table and AttendanceMain table for keep all the staff attendance ...
I also created a query to append the data into AttendanceMain table ... the problem is , I always reuse the staff name , so i created a Staff form , but everytime i open the staff form the previous record still there , anyway to clear the "Tick Box" in staff table and without affecting the name ?(Name also is a record in row by row)
Using Access 2013.I have a Search Form with a Run Query button. I would like to add a button that clears the criteria entered into the search text boxes. Right now to change the criteria I have to manually delete everything entered, closed the current query it had open then go from there. I have tried using the command button wizard, form operations, then refresh form data. When I click that button a window pops up "The command or action 'refresh' isnt available right now".Is this not the correct way to set up what I need? What other options should I look into for setting this up?
I'm having trouble getting my form to be "blank" except for the labels upon loading. I've tried putting in some code "on load" but it doesn't clear everything. I haven't had this trouble on some of my other db's, the only difference here is it's a switchboard. I don't know if that matters.
I have made a form with a subform to search for existing records based on inputting a postcode then selecting the relevant address from the subform which then fills the form with details of that chosen record ready to issue a further package linked to that original record.
To prevent errors and confusion by the users I coded the following:
Private Sub CmdFindAddress_Click() If IsNull(Me.TxtPostcode) Then MsgBox "You need a Postcode to use this button. Please type one in." Me.TxtPostcode.SetFocus
[Code] ....
'Where the postcode entered does not exist in records or if there is a mistake typing in the postcode, below will remove residual record details from previous postcode ready for a new postcode search:
For Each ctlCurr In Me.Controls If ctlCurr.Tag = "clear" Then ctlCurr = Null End If Next ctlCurr Me.Refresh End Sub .........
The problem is that if I test the system by inputting a postcode where I know there are no records, the CtlCurr is highlighted and the error message is:
Compile error: variable not defined ..........
This does not happen if I have already selected a postcode so the record fields are filled and then change the postcode - so the record fields are cleared.
Previously, entering a postcode which did not match existing records generated the "there are no records...." error message instead. How do I define CtlCurr?
In creating a form with checkboxes created using the "option group" control type,
I am trying to find a way to clear all the checkbox options in an option group after having checked an option. For instance, if the user checks one of the options but then decides they actually want to skip that question altogether and leave it blank - is there a way to clear all options, or reset the question?
I am currently working on a main form in Access 2010 which includes quiet a lot of fields, therefore i choose to create parts of it (which are as well optional, as they do not apply to all records) as different forms which i linked to the "mother" form afterwards through a checkbox by using the following code:
Private Sub chkMajor2_Click() Dim strformname As String If Me.chkMajor2 = True Then strformname = "Major 2" DoCmd.OpenForm strformname, acNormal End If
[code]....
to make the next form visible for selection after filling in the current one...something like an "add more.." field actually, which i choose to represent as checkbox.The issue that i encounter is that when i click the "Add New" button in the main form, it doesn't clear also the fields in the linked forms. Is it possible to do that with a VBA code? Or how should i proceed?
The current code that i have for the button is:
Private Sub cmdNew_Click() DoCmd.GoToRecord , , acNewRec End Sub
I have a timesheet form that pulls from a query that pulls from a table I want to clear my daily charges and reset back to the default value of 0 when my form opens ...
I have a tabular form that is based on a select statement (Query) in the source property. It filters & sorts from this select statement. permanently
I have just added a Me.Filter = "[Form1].[InDate] = #" & MyValue & "# " Me.OrderBy = "Indate DESC"
This all works fine, filters & sorts on the existing results.However this new filter & sort seems to remain no matter what I do.I have used every variation one me.filter ="" with Me.FilterOn = True, False & every combination.
Me.Filter="" & Me.FilterOn = False does initially seem to clear the lsit to show all records but as soon as type anything that filters the Form on the original, existing underlying select statement the extra Filter Property & Sort properties are occupied with the last filter/sort.
I have manually deleted any remaining Filter Or Sort properties direct from design view, saved, compacted & saved again.Once I use the new me.filter it will always returned as soon an any filter on the form is applied.I definately am not setting it again anywhere. Is there something better than me.filter ="", seen clearallfilters mentioned but not sure if this would apply just to the current form but reluctant to use a blanket clear as I do have quite a lot of other things going on.
Not sure when but many months (If not years) ago my form source stopped being a query and started using the query (sql) direct from the source property.I have left it this way as not sure if any consequence of moving back but don't remember how or how it happened. What are the pros cons of using a separate query.
I have a search form that's slightly modified search form modeled after the one available here on this site. It's a main form with a list box. I use the listbox to narrow down the results I want from the search function.
The search details are shown in a sub form that contains sub-sub forms
As seen in the code below, I am using the listbox to set a filter on the subform . Works famously until I search for something that does not exist in the database. I then receive runtime error 3075.
I believe it's related to the way I'm showing the details in the subform (by enabling a filter). If there is no record in the database that match the search criteria, I don't want any error messages or pop-ups and preferably would like the listbox to be blank.
Attached a screenshot of my form. red = main form green = subform blue = sub-subforms tan = obscuring the search results
Code: Private Sub SearchFor_Change() Dim vSearchString As String vSearchString = SearchFor.Tex SrchText.Value = vSearchString Me.SearchResults.Requery
Created a button through button wizard that is supposed to open a form to add a new record, but all of the fields don't clear out. Only some fields clear and other fields actually populate data from another record.
Snip1 shows my form with a record selected. When I click the 'New Waste' button, you can see that the record ID goes to '(New)', but the fields actually populate data from another record.
This even happens if I set 'Data Entry' to yes for the form.
here's the code behind my button:
Code: Private Sub btnNewWaste_Click() DoCmd.GoToRecord , , acNewRec End Sub
I even commented out my code for duplicating my record just in case but that didn't make a different.
Code:
Private Sub btnDuplicateRecord_Click() Dim ctrl As Control For Each ctrl In Me.Form.Controls If ctrl.Tag = "DefaultMe" Then ctrl.DefaultValue = """" & ctrl & """" End If
[Code]....
edit: this problem persists in a backup database that only contains one test record. The button pre-populates data that doesn't exist in the back-up database.
I have a multi select listbox that I rebuild as I index thru some products in another listbox. This listbox then gives me the ingredients I can use. Works well, but the ghost selections in the listbox stay hilighted even after the rebuild.
I can select and de-select at will if there are actual items in the list box, but the ghosts remain.
Here is the code to clear the listbox
Dim _ ctlSource As Control, _ varSelected As Variant, _ intListCount As Integer Set ctlSource = Forms.frm_select_UPC_LoinGrade!lstBox_ColdStorage For intListCount = 0 To ctlSource.ListCount ctlSource.Selected(intListCount) = False Next intListCount Forms.frm_select_UPC_LoinGrade.Refresh Forms.frm_select_UPC_LoinGrade.Repaint
I have a listbox "lbxMP" that holds names of forms and a subform "ctrlMP" that opens selected form (ctrlMP.sourceobject = lbxMP). I also have some various master cbx that control criteria in each form. I am trying to create a button that will not only clear/null all the cbx values (which works fine), but I am having a hard time telling me.ctrlMP to go back to null or unbound (i want it to blank out the subform to make it look fresh). I have tried requry and also me.ctrlMP = null and ctrlMP=unbound with no luck.
I've created and tested my database. What step or steps do I take now to make it so it's a program that only shows the forms and menu's I created, not all the Tables, Queries etc and the formatting options? Is there a link that explains what to do step by step?
I have a form with a subform. On the subform I have a field that has customer number in it, on the main form there is a field that will need to say "none" if the field with the customer number is empty, and empty if the customer number field is filled in. the field will not print out in the letter if there is no data on it.
the customer number comes from the table "CustomerNumbersData" the the field that needs to be empty on the main folder comes from table "CustomerData"
I am a beginner and this question might seem stupid, but here it goes...
I want to put a few check boxes on a form...Basically I want to have week 1 to week 10 check boxes to register student's attendance. I would them export data to excel and use pivot table to generate a report. What I could not figure out yet is how to link a check box to a field on a table...
please see attachment. I created a small database to help explain my issue.
When I click on the check box in box 1(train), the text box turns blue...great...and even better the other records stay clear when I scroll down, which is what I want to happen. But when I scroll back up, from dog to train, the blue in the train box has gone- not what I want! I would like the blue to stay in every box that I click on. Any ideas?
