I've seen code similar to below that clears all filters, but is it possible that instead of clearing all filters, I can clear just a specific one?
Private Sub cbGroup_Click()
Me.cboUnitName = Null
Me.cboGroup = Null
Me.tbl_users_subform.Form.Filter = ""
Me.tbl_users_subform.Form.FilterOn = False
Me.tbl_users_subform.Form.RecordSource = "tbl_users"
Me.tbl_users_subform.Requery
End Sub
I have a tabular form that is based on a select statement (Query) in the source property. It filters & sorts from this select statement. permanently
I have just added a
Me.Filter = "[Form1].[InDate] = #" & MyValue & "# "
Me.OrderBy = "Indate DESC"
This all works fine, filters & sorts on the existing results.However this new filter & sort seems to remain no matter what I do.I have used every variation one me.filter ="" with Me.FilterOn = True, False & every combination.
Me.Filter="" & Me.FilterOn = False does initially seem to clear the lsit to show all records but as soon as type anything that filters the Form on the original, existing underlying select statement the extra Filter Property & Sort properties are occupied with the last filter/sort.
I have manually deleted any remaining Filter Or Sort properties direct from design view, saved, compacted & saved again.Once I use the new me.filter it will always returned as soon an any filter on the form is applied.I definately am not setting it again anywhere. Is there something better than me.filter ="", seen clearallfilters mentioned but not sure if this would apply just to the current form but reluctant to use a blanket clear as I do have quite a lot of other things going on.
Not sure when but many months (If not years) ago my form source stopped being a query and started using the query (sql) direct from the source property.I have left it this way as not sure if any consequence of moving back but don't remember how or how it happened. What are the pros cons of using a separate query.
hi,
How do I clear a filter ? When I re-open a form that is based on a stored parameter query, I get a message about "apply/filter that cannot be applied..."
So, as a result, I put in some code for that command button that closes the form, then reopens it, and I get my prompt from the query. Isnt there a way to clear the filter without closing the form? It looks funny to me and I know the users will have a cow. I sure appreciate any ideas.Im digging around to see what I can do quickly, but I cant find anything that works. thanks a lot!
I am using my form to add job descriptions and if the user checks the check box for current, it adds the description to the table as the current job description. I need to clear the check box for the next entry but the box retains the choice so when the user selects another description, the form saves it as current even if the box shows no check in the box. I tried the code below, but that only changes the state of the box, but not the reality of the state of the box.
Code:
Me.CheckBox.Value = No
Hi!!All,
I'm completely new to Access and would greatly appreciate your help in this problem.
I have a form name frmDataEntry with 10 fields, which enters data through an append query in Access. Firstly I was wondering whether I could do mutiple data entries, say 5 different entries of 10 fields each at the same time? Secondly, I wanted the form to clear all the entries after the user has submitted the data(I have made a submit button for this). I would greatly appreciate it if you could help me overcome these problems.
Thanks a lot,
Vakul
I already have a form where I can enter data.
In that form I would like to have different check-boxes (three of them), representing actions done that day.
Let's say each form represents a contact, and I need check-boxes for:
- Called
- E-mailed
- Visited
This is something I am now able to do. But.... I would like these check-boxes to be cleared automatically the next day.
So when the database is opened the next day, these check-boxes start unchecked.
And I would also like that as soon I check a check-box on a certain day, there is an entry for that action and date is being entered in the record of that contact, so I am able to check later on what day, what action was performed.
Im doing an attendance in Access database , i have a Staff table and AttendanceMain table for keep all the staff attendance ...
I also created a query to append the data into AttendanceMain table ... the problem is , I always reuse the staff name , so i created a Staff form , but everytime i open the staff form the previous record still there , anyway to clear the "Tick Box" in staff table and without affecting the name ?(Name also is a record in row by row)
Code:
Private Sub Check253_AfterUpdate()
Me.Text255 = Environ("UserName")
If Me.Check253 = -1 Then
Me.Text254 = DLookup("[Lot]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text256 = DLookup("[Exp]", "[tblAutoGen]", "[Inuse] = -1")
Me.Text258 = DLookup("[Lot]", "[tblEthanol]", "[Inuse] = -1")
Me.Text260 = DLookup("[Exp]", "[tblEthanol]", "[Inuse] = -1")
Me.Text262 = DLookup("[Lot]", "[tblDPBS]", "[Inuse] = -1")
Me.Text264 = DLookup("[Exp]", "[tblDPBS]", "[Inuse] = -1")
Me.Text266 = DLookup("[Lot]", "[tblTE]", "[Inuse] = -1")
Me.Text268 = DLookup("[Exp]", "[tblTE]", "[Inuse] = -1")
Me.Text259.Value = Date
End If
End Sub
How do I clear the values in each textbox if check253 = 0 rather then going to each and clearing them?
Using Access 2013.I have a Search Form with a Run Query button. I would like to add a button that clears the criteria entered into the search text boxes. Right now to change the criteria I have to manually delete everything entered, closed the current query it had open then go from there. I have tried using the command button wizard, form operations, then refresh form data. When I click that button a window pops up "The command or action 'refresh' isnt available right now".Is this not the correct way to set up what I need? What other options should I look into for setting this up?
View 1 Replies View RelatedI'm having trouble getting my form to be "blank" except for the labels upon loading. I've tried putting in some code "on load" but it doesn't clear everything. I haven't had this trouble on some of my other db's, the only difference here is it's a switchboard. I don't know if that matters.
View 1 Replies View RelatedI have made a form with a subform to search for existing records based on inputting a postcode then selecting the relevant address from the subform which then fills the form with details of that chosen record ready to issue a further package linked to that original record.
To prevent errors and confusion by the users I coded the following:
Private Sub CmdFindAddress_Click()
If IsNull(Me.TxtPostcode) Then
MsgBox "You need a Postcode to use this button. Please type one in."
Me.TxtPostcode.SetFocus
[Code] ....
'Where the postcode entered does not exist in records or if there is a mistake typing in the postcode, below will remove residual record details from previous postcode ready for a new postcode search:
For Each ctlCurr In Me.Controls
If ctlCurr.Tag = "clear" Then
ctlCurr = Null
End If
Next ctlCurr
Me.Refresh
End Sub
.........
The problem is that if I test the system by inputting a postcode where I know there are no records, the CtlCurr is highlighted and the error message is:
Compile error: variable not defined
..........
This does not happen if I have already selected a postcode so the record fields are filled and then change the postcode - so the record fields are cleared.
Previously, entering a postcode which did not match existing records generated the "there are no records...." error message instead. How do I define CtlCurr?
In creating a form with checkboxes created using the "option group" control type,
I am trying to find a way to clear all the checkbox options in an option group after having checked an option. For instance, if the user checks one of the options but then decides they actually want to skip that question altogether and leave it blank - is there a way to clear all options, or reset the question?
I am currently working on a main form in Access 2010 which includes quiet a lot of fields, therefore i choose to create parts of it (which are as well optional, as they do not apply to all records) as different forms which i linked to the "mother" form afterwards through a checkbox by using the following code:
Private Sub chkMajor2_Click()
Dim strformname As String
If Me.chkMajor2 = True Then
strformname = "Major 2"
DoCmd.OpenForm strformname, acNormal
End If
[code]....
to make the next form visible for selection after filling in the current one...something like an "add more.." field actually, which i choose to represent as checkbox.The issue that i encounter is that when i click the "Add New" button in the main form, it doesn't clear also the fields in the linked forms. Is it possible to do that with a VBA code? Or how should i proceed?
The current code that i have for the button is:
Private Sub cmdNew_Click()
DoCmd.GoToRecord , , acNewRec
End Sub
I have a timesheet form that pulls from a query that pulls from a table I want to clear my daily charges and reset back to the default value of 0 when my form opens ...
Saturday, Sunday, Monday , Tuesday , Wednesday, Thursday, Friday
I have a continuous form based on table "INCOMES" that shows all the payments received, which mediums can be (field "PMNT_MEDIUM"):
- check
- transfer
- taxes
- cash
Table "INCOMES" is filled using another form, but in this particular form I just want to show "check", "transfer" and "cash" (not "taxes") so that I can track all the cash incomes.
Note: taxes are loaded because they appear in my invoices and I need them there to reach the invoice total amount.So my form has a search bar which allows me to search by PMNT_MEDIUM listing all "checks", all "cash" or all "transfer". I can also search by payment number (meaning: check number). To that end I have a "search" button that applies the filter. And I have another button that "cleans" the filtering by "putting a "" in the search-bar and then calling the "on click" of the search button".
What I need is, no matter if I click over the "search" or "clean" button, it NEVER shows me the "taxes".Search button, on click code:
If IsNumeric(Me.busq_chq_med) Then
Me.Filter = "[PMNT_MEDIUM_NUMB] =" & Me.SEARCH_BAR
Else
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*' or [INVOICE] like'" & Me.SEARCH_BAR & "*'"
End If
Me.FilterOn = True
Clean filter button, on click code:
[SEARCH_BAR] = ""
Call [Search button]_click
Me.Filter = "[PMNT_MEDIUM] like'" & Me.SEARCH_BAR & "*'"
Me.FilterOn = True
I have a search form that's slightly modified search form modeled after the one available here on this site. It's a main form with a list box. I use the listbox to narrow down the results I want from the search function.
The search details are shown in a sub form that contains sub-sub forms
As seen in the code below, I am using the listbox to set a filter on the subform . Works famously until I search for something that does not exist in the database. I then receive runtime error 3075.
I believe it's related to the way I'm showing the details in the subform (by enabling a filter). If there is no record in the database that match the search criteria, I don't want any error messages or pop-ups and preferably would like the listbox to be blank.
Attached a screenshot of my form.
red = main form
green = subform
blue = sub-subforms
tan = obscuring the search results
Code:
Private Sub SearchFor_Change()
Dim vSearchString As String
vSearchString = SearchFor.Tex
SrchText.Value = vSearchString
Me.SearchResults.Requery
[Code] .....
How can I loop loop through a tabular form to clear each value in a field of all rows ? I tried the below code, but it did not work.
Loopcnt = DCount("*", "Budget")
For Loopcnt = 1 To Loopcnt
[Forms]![Budget Form].[Newbudgt] = Null
DoCmd.GoToRecord , , acNext
Next Loopcnt
I want to be able to clear all the contents in my fields (which are bound to my table) with a click of a button
View 1 Replies View RelatedCreated a button through button wizard that is supposed to open a form to add a new record, but all of the fields don't clear out. Only some fields clear and other fields actually populate data from another record.
Snip1 shows my form with a record selected. When I click the 'New Waste' button, you can see that the record ID goes to '(New)', but the fields actually populate data from another record.
This even happens if I set 'Data Entry' to yes for the form.
here's the code behind my button:
Code:
Private Sub btnNewWaste_Click()
DoCmd.GoToRecord , , acNewRec
End Sub
I even commented out my code for duplicating my record just in case but that didn't make a different.
Code:
Private Sub btnDuplicateRecord_Click()
Dim ctrl As Control
For Each ctrl In Me.Form.Controls
If ctrl.Tag = "DefaultMe" Then
ctrl.DefaultValue = """" & ctrl & """"
End If
[Code]....
edit: this problem persists in a backup database that only contains one test record. The button pre-populates data that doesn't exist in the back-up database.
I have a form that is showing data from 1 table. That table has 12 different fields on it and I want to be able to filter based on selections I make in a combo box in the header of the form. The filter string must be dynamic enough to allow filtering based on 1 criteria selected, or multiple criteria selected. For example:
If I have values in filter fields 3, 5, and 9 I'd want the filter string to be created as follows:
"...WHERE field3 = field3filter.value AND field5 = field5filter.value AND field9 = field9filter.value"
If I have values in only field 7, I'd want th efilter string to be created as follows:
"...WHERE field7 = field7filter.value"
And so on and so on.
I have created some filters before but all of the different VBA syntaxes I'm using seem to come up short.
Is it possible to clear filters set on a subform using a button on the main form?
View 1 Replies View RelatedI have a multi select listbox that I rebuild as I index thru some products in another listbox. This listbox then gives me the ingredients I can use. Works well, but the ghost selections in the listbox stay hilighted even after the rebuild.
I can select and de-select at will if there are actual items in the list box, but the ghosts remain.
Here is the code to clear the listbox
Dim _
ctlSource As Control, _
varSelected As Variant, _
intListCount As Integer
Set ctlSource = Forms.frm_select_UPC_LoinGrade!lstBox_ColdStorage
For intListCount = 0 To ctlSource.ListCount
ctlSource.Selected(intListCount) = False
Next intListCount
Forms.frm_select_UPC_LoinGrade.Refresh
Forms.frm_select_UPC_LoinGrade.Repaint
I have a listbox "lbxMP" that holds names of forms and a subform "ctrlMP" that opens selected form (ctrlMP.sourceobject = lbxMP). I also have some various master cbx that control criteria in each form. I am trying to create a button that will not only clear/null all the cbx values (which works fine), but I am having a hard time telling me.ctrlMP to go back to null or unbound (i want it to blank out the subform to make it look fresh). I have tried requry and also me.ctrlMP = null and ctrlMP=unbound with no luck.
View 1 Replies View RelatedI am using MS Acess2000 and need to make a report that will be passed around with production work. My primary key is the invoice number of the work order. Currently to open an invoice i have a macro, attached to a query with the following qualifiers; Like [Enter invoice]
This pulls up the current record fine.
for the form and flags the folloing in the property filter sectin of the form
(((([CustomerTableMasterRef].[Invoice]) Like [Enter invoice])))
PART 2
Now I am trying to use microsofts how to filter a report using a forms filter...
This picks up on the Invoice query as shown above but does not just insert the query results...
Is there better code or another way to approach this... Currently i am using:
Name:cmdOpenReport
Caption: Open Report
OnClick: [Event Procedure]
Private Sub CmdOpenReport_Click()
If Me.Filter = "" Then
MsgBox "Open an Invoice First"
Else
DoCmd.OpenReport "rptCustomers", acViewPreview, , Me.Filter
End If
End Sub
Using this code not only does my report not detect the correct fields to import data (no data is filled in) but it requerys the invoice or atleast should, which I could do with out all of that code...
Where should i go from here?
I have placed a filter button on a form as a filter and written the following on-click event procedure:
DoCmd.SetWarnings False
DoCmd.RunCommand acCmdApplyFilterSort
Me.Filter = "ACCOUNT_DO_NOT_EMAIL = 'HS'"
Me.FilterOn = True
When I click the filter button I get a blank message box titled 'Microsoft Access" and an OK button, when closed the filter works perfectly.I have checked this procedure in other forms and it works without showing the blank message box.The only difference with this form is that its control source is a union query.
I've created and tested my database. What step or steps do I take now to make it so it's a program that only shows the forms and menu's I created, not all the Tables, Queries etc and the formatting options? Is there a link that explains what to do step by step?
View 2 Replies View Related