Forms :: Combo Box Not Getting Focus When Opening Via Navigation Bar
Aug 13, 2014
I have a combo box combo51.
If I open the form directly from the left pane (all access objects)
forms engineering entry
the form opens and combo51 has focus (the cursor is in it)
If I open it from the Engineering tab on the navigation bar the Engineering Entry is the default left hand form and opens, but no focus as in the screen dump.
If I go to the code on Engineering Entry, On Load, Combo51.SetFocus This doesn't seem to work as I would expect.
How can I get this combo box to get focus when opening this form via the navigation bar.
In a form, I go to a textbox with setfocus. The whole text is selected then. But how can I place the cursor after the existing text, so that I can begin writing immediately?
Can I use combo boxes placed in the detail area of a navigation form, above the sub menus but below the navigation? I am not able to get one to work properly . I can set it up but when I run the form, and try to pick an item from a list, it will not work...
I'm trying to get a combo box & button to work together. On the main form of the attached database, I just want the button to go to the associated record based off my selection (or entry) in the combo box.
I've tried the following:
- Looked through the Northwind sample database for a close example. Tried my best to replicate the functions but it didn't work - Looked through other examples posted and tried to manipulate the code to no avail - Tried using [Forms]![Main Form]![cmbLastName] in both the filter & criteria section of the macro
I have a user login form wherein my users authenticate their employeeid as well as their person PIN. If the user authenticates with a valid username/ password combination, then the employee id and the role (permissions) for that user are stored on the form and it is minimized to stay open. If the user that authenticates has "Admin" role then I want to unhide the navigation pane. For all other roles I want the navigation pane to remain hidden.
That said, the default setting in the database is for the navigation pane to remain hidden. I have a piece of code on the login form as follows:
Code: If Me.role = "Admin" Then DoCmd.SelectObject acTable, "NavigationPaneObject", True DoCmd.RunCommand acCmdWindowUnhide Else Exit Sub End If
This is successfully unhiding the navigation pane, but I'm getting the following error message and I don't know how to get it to go away."Run-time error '2544':
"Microsoft Access cannot find the NavigationPaneObject you referenced in the Object Name argument."The code is unhiding the navigation pane.
I want to have my users open the database to a windowed navigation form. Maybe a shortcut but how would I set it to when the database first opens it goes strait to that windowed(or dialog) box.
I am not able to disable NavigationButton when i login navigation form using login form. I am using MS access 2007 - 2010.i am using below code but getting error.
I have a Form opening from Access Options. I would like to close this Form using the Timer. The following is the code I have used but it is not working.
Private Sub Cover_Page_Form_Load() OpenTimer = Timer End Sub Private Sub Cover_Page_Form_Timer() If (Timer - OpenTime) = 5 Then DoCmd.Close acForm, "Cover_Page_Form", acSaveYes End Sub
Next question. If I can get this to work can I then use a DoCmd to open new Form within the code above or do I need a new process.
I am trying to do a search for my Access form using a combo box. It works when I search by a field called institution. But I want the records to be displayed in descending order by date rather than by Id. What should I add to my code.
Code: Private Sub Combo21_AfterUpdate() Dim rs As DAO.Recordset Set rs = Me.RecordsetClone rs.FindFirst "[INSTITUTION] = """ & Me.Combo21 & """"If rs.NoMatch ThenMsgBox "No Act Account for company selected."Else 'Display the found record in the form.Me.Bookmark = rs.BookmarkEnd IfSet rs = NothingEnd Sub
Also I want users to perform a search by selecting an institution from one combo box then a date from another box. Any help on this would be greatly appreciated.
I have been tasked with creating a tool to analyse mobile phone bill data and present the analysis, and our recommendation, to a customers. Being new to Access (other than basic tuition) this has been a slow uphill task, which is finally nearing completion, however there is a problem which I have not yet been able to overcome.
The requirement is for the DB to open first on a splash screen (lets call it Form A) with fancy picture where our customer is selected from a combo box, the customer is then telephoned, a linked computer screen is established and our staff then click "Go" to proceed to a second form (Form B) showing an account overview and more details.
The problem I have is when "Go" is clicked, the second form loads via on click event, and even populates the correct customer in its combo box. Unfortunately that is as far as it gets - the combo does not look up the information. The customer needs to be selected again for the subforms and subreports to load with the customer overview. To clarify, form B just sits there blank until the customer is re-selcted from the combo box in form B.
On a main form I have 2 sub forms. On the main form I have a command button that asks how many guests in a booking and depending on the response populates the subform with Guest Names. However it will only do this if I click on the subform and then click the command button.
I want to include some code that sits behind the command button on the main form that will duplicate the otherwise manual selecting of the sub form. And I am thinking this is a SetFocus procedure.
I have tried this code; [Forms]![Booking].[SubForm1].SetFocus where Booking is the name of the form. I do not know whether the Subform is #1
i have a button that allows you to "edit" the show that is selected. You can double click the show name from the list box, and it opens that show in viewing mode, but you cant edit it. You can click the edit show button in the form that you view the show with, but I want to be able to edit that show from the main form with the list box. But, the problem im having, is if someone clicks the "Edit show" button without have a show selected, they get a error.
If lstShows has focus Then DoCmd.OpenForm "frmEventsEdit", , , "EventID = " & Me.lstShows
Else 'do nothing, since having no code here, it does nothing
End If End Sub
That is what I want, but I cant get access to open that show up if its selected.I need to be able to tell if it has focus on it, and to open that selected show up.
If i open a form with a sub form on can i open it so that the focus go directly to a control on a sub form.I have tried to do it with a macro on the on open event to go to control but it comes up that the control don't exists on the sub form.i am using access 2010.
I have a customer provide his or her SSN. If the SSN matches a record in a table the form opens specifically on that record (no problem). If the SSN doesn't match a record, the form adds a new record (again, no problem).
The issue I'm having is with the new record. The customer is able to scroll through other records (page up, page down), which is a no-no. I need the form to be locked on the new record. I've posted my code below.
Private Sub Command543_Click() On Error GoTo Err_Command543_Click Dim strCriteria As String Dim rst As DAO.Recordset Set rst = Me.RecordsetClone
Is it possible to open a report using a combo box. At the moment all my reports are opened using cmd buttons. This is just a question of curiosity, I will continue to look into it myself of course.
and two sub-forms called "frm_fabricator" & "frm_engineer"
On the sub form "frm_fabricator" I have a combo box and after updating this combo box (called fabricator) I would like the cursor to jump into a field called “ApllicationsEng” on the other sub form "frm_engineer"
I have a continuous form with a combobox and a text box. In the after_update event of the combobox I want to setfocus on the text box - of the specific record that I'm on. I tried using Me.CurrentRecord but that returns me to a completely different record than the one I was on. How can I setfocus to the text box of the record I am on?
I have a subform that I use to scan in products using a barcode reader, when the item scans it moves to the quantity (Qty) field where I have this code:
Code: Private Sub Qty_GotFocus() Qty.Value = 1 DoCmd.GoToRecord , , acNewRec txtOrderNo.SetFocus End Sub
I am simply trying to set the Qty value to 1 and move onto the next record ready to scan another product in.
I have a Dynamic Search form, which I use to search for client, on the double click it takes me to the client, at which point I have the Forms Visible set to False.
When I click on a button to open that Form, the Visible turns back to True, however it shows my last search results, how do I clear it so that when I call it back up it is ready to search again, and my focus is set to the SearchFor box.
When the client clicks in a text-Box or Combo-box in a sub-form, the field seems to jump to the side. in this image it jumps to the left, but jumps to the right to..., it is quite irritating, especially attempting to open a combo-box list, and see the button jumping aside.We renewed the file many times, so I don't think it is corrupted, but go know..the file can be accessed via network or terminal server, the pic is from terminal, but happens via network too.
I have a single main form with a datasheet subform. When I scroll through the records shon in the main form, each has a different set of child records shown in the subform.
I want the focus to be on the last record of the subform each time.
On the main form, I have a button and this code
Code: Private Sub cmdLast_Click() Me.frmRevisionsSub.Requery Me.frmRevisionsSub.SetFocus Me.frmRevisionsSub.Form.txtRevTag.SetFocus DoCmd.GoToRecord , , acLast End Sub
which works perfectly, when I click the button.
If I call this code from main form's OnCurrent, focus remains on the first line of the subform instead of going to the the last. I have an inkling that it has to do with when the requery of the subform takes place, when I scroll through the records on the main form.
I am having trouble setting the focus on my forms... I have a parent form with two labels that are coded like this.
Private Sub Advisory Messages_Click() Me![ Advisory Messages].Visible = _ Not Me![Advisory Messages].Visible End Sub
[code]...
I have the visible property set to no on the subform allowing the user to toggle the visibility when the label is clicked. The problem though is when I click inside the subform to use the scroll bar to view records, it transfers the focus to the subform making it almost impossible to close by clicking the label again because the label is on the parent form. I found the "me.parent.setfocus" command and a few other set focus commands but I don't know what I should be applying the command to in order to make it work.