I'm trying to create a Data Entry only form based on a small table called tblProject.
It consist of the fields Project_ID, Artist_ID, Project_Name, and Project_Notes.
I used the wizard to get me started and i know how to change the form to data entry only, but the problem is the vague data in the Artist_ID control. It shows up as a number, because it is an FK to another table (tblArtist) where more details on the artist are held. (including Band_Name)
I want to be able to make it a combobox with a list of the Band_Names from the tblArtist table. This would make creating "a new project" much easier.
I want a combo box in a form for data entry. Is the best method in doing this creating a new combo box in the form and linking it to a table, or using a lookup field in my table?
What I am trying to do is create a data entry form to an "order table" using 2 cascading combo boxes. I have created a data entry form based on a query. I can't get the cascading combo boxes to work properly.Here is the code:
Private Sub Combo0_AfterUpdate() Combo2.RowSource = "SELECT L2_ID,L4_Element_name,L5_Category FROM qry_ord WHERE L3_ID = Combo0.Value;" Combo2.DefaultValue = [Combo2].[ItemData](0) Command4.SetFocus End Sub
relationship -trainer to course (many to many) -course to programme(many to one)
I have created an input form to add new trainer. In the input form i have combo box to enter trainer's course n trainer's program.
Each time i save a new record. A new data is created in the course and program table. I dont want that to occur. I want the data to be saved in the trainer query with the existing course and program.
I have a form with four combo boxes on it, the four boxes all open the same form and return a record based on the selection from a different column from the same query.
To make it work smoothly I think I need to make it so it is only possible to enter data in one combo box at a time. I could also do with some error handling.
I have one field AccountName in customer table and another field AccountID.
In my form I would like to select from the combo box AccountName during data entry and then have the AccountID automatically update in the Account ID field.
I can't work out how to update the selections available in a combo box as follows: I use a combo box in a main form to select a record (yacht) If it's a new yacht then I use an event linked to a button to call another form to add the new Yacht On exiting the Yacht Maintenance form I return to the main form The combo box in the main form doesn't list the yacht i just added unless I exit and re-load the form
I'm not sure of the best way to refresh the combo box selections or main form without exiting.
I have a combo box that pulls account name data from tblAcctInfo. the combo box has an OnChange event which updates a textbox, txtAcctAddr.
when i have a new account that i would like to be listed in the combo box, i use a form, frmAcctAdd, to add a record to tblAcctInfo.
what i would like to do, is: 1) when i type a new value in the combo box that isn't in the list, have that string value pre-populate in the frmAcctAdd. 2) when i have added the new account info into frmAcctAdd and then saved the record, i would like the new value to pre-populate in the combo box, with the txtAcctAddr textbox also updated via the OnChange event (or maybe a different event is more appropriate?).
I have created a long version of this which requires a lot more user interaction (1-user typing in a new value into the combo box, 2-user RE-typing the SAME value into a data entry form, frmAcctAdd, 3-user saving the new record, 4-user re-clicking the combo box and selecting the newly added value) but i am trying to streamline the data entry with auto-populated fields.
I am working on creating an access database for tracking physical assets linked to locations. I need to make a combo box list to show items other than the current location of the asset. Basically I need it to refer to last enery of the user and define the new possible entries. so we have a unique relationship between location and asset. The assets and location will always remain fixed and there is never going to be any addition. I am creating a web form so that it can be uploaded into sharepoint.
I an trying to create a data entry form (IndividualsEntryFm) to input data for fields such as (First Name),(Birthdate) etc., these to be saved to the (IndividualsTbl)
I also have another table (NamesTbl) which has family names etc. The two tables are linked by a (MainID) field. I want a combo box on the individualsEntryFm so that I can select the family name. Then I wish the empty fields for the IndividualsTbl to be available to enter data.When I press the save button I then want this data saved, together with the MainID from the combo box to the IndividualsTbl.
I have set the IndividualsTbl with a (PersonID) field as an auto number each individual therefore has a unique PersonID but may well share the MainID. I'm trying to link many people to the same address.
My aim is to have my forms open to a new record, which I have done, but if my users need to then update or edit data in previous entries, they can click a button that allows this.
My thoughts were to add a button, then put in code so that the necessary properties changed the form from displaying a new record or records entered since opening it, to showing all records in the associated table....
As an example there is a table for purchase orders. When clicking on this from the main menu form, it opens up the purchase order form to create a brand new PO. At times though, we will need to revisit an order to attach a copy of an invoice, or update the cost of whatever was purchased.
My db has multiple linked tables. As time passes and work on a project continues data needs to be added to a separate table that is linked to the first table to be populated.
i.e., Initial design data is entered first, when drilling is complete more data is added to a linked table, when drilling is surveyed yet more data is added to the second table.
What I want to be able to do is to query for a particular set of existing design data, display this on a form and on the same line enable data entry to other fields from other tables which are linked to the existing design data.
I have created a form to be used for data entry, Where i have identified standard data, I have set the Combo Box on the form to be a "Value List" so as to standardise the data entry.This creates two problems for me.
1. When Using the form, instead of saving the text value to my table it is entering a numerical character?
2. On two of my combo boxes, whilst they have been configured the same, when i try to select an option for the list, it does not accept it? when i try to type the same option into the field of the form it tells me that the option is not in the list?
I've just finished model of DB and it looks like this ( ERM.png )
Now I would like to insert some data into database though form, but if I for example add New contractor ( first name, last name ) with his location , it doesnt connect in table User-Location ... so it is not matched ...
I have a continuous form that is populated from a query. The header has data entry text box for NCR#. I want to run a update query to have the header update each record found in the query.
I've tried a number of things and the closet thing I've got is the header entry updating every record. Something is wrong with my criteria but I'm not sure what.
I have a database I am using to record financial transactions. I have a transaction edit/entry form that uses combo box lists to select the different segments of my 32 digit account numbers. The issue I am running into is that when I enter a value value in the first box/field the form jumps to the very first record.I then can use the navigation buttons to get back to the last record, and all the subsequent boxes/fields work fine without jumping to a different record.
On my data entry form I have a tab control with three pages
At the bottom of the first page I have a sub form with 3 fields
Currently, when tabbing, the focus runs through the fields as per the tab order
BUT
Once it gets to the subform (datasheet view) it jumps into the first field of the first record rather than the first 'empty cell' thereby starting a new record in the datasheet.
Once the three fields in the datasheet are completed the focus tabs back to the top of the first page of the form rather than onto the next page of the form
How to correctly reference controls using VBA so I could SetFocus where I want?
The Main form is called frm_Admissions
It has three pages called Patient, Treatment & Service Providers
Patient has a subform called sub_Cluster (which may or may not hold Cluster Information)
I would like the tab order to jump from the last textbox on the form into the first field of a new record in the datasheet (rather than the first field of any existing records)
Once it has finished in the datasheet I need to tab to the first field/textbox in the Treatment's page of the form rather than back to the first field/textbox in the Patient's page.
I am around 2 months working with access. I created an application/dataentry form and it was working very well. suddenly today, I got an error which says. Run-time Error 5 "Invalid Procedure Call or Argument. together with that or may be independent, a pop up search form just disappeared. I put a msgbox in form load of pop up form and the msgbox appears but the pop up form just disappeared.
I was about to give the application to use and thats when all these happened ...
I am tasked with creating a scientific database of fish catches at various different sampling stations. I envisage the entry form having a hierarchy, ie year, season, date, sample station, species caught, and then the specific associated data with each species (weight, abundance, length etc) will be a distinct record.
As fas as data entry is concerned, I would like the user to not have to re-enter the same information over and over when entering multiple species entries at the same sampling station, on the same date and so on up the hierarchy.
How do I create a form that will allow me to enter data into three different tables?
I have a rather simple database for tracking students. When I get a new student I need to take information off their paper application and enter it into three separate tables, Student, Families, and Demographics. Each of these tables contains the fields StudentID, StudentFirst, and StudentLast.There is a relationship between the StudentID field on each table, with Student being the main table and Families and Demographics coming off of it. All relationships are one to many. StudentID is the key for the table Student.
I want to create a form to add a new record to each of these tables. I want my data to be displayed in the Columnar style. I only want to enter StudentID, StudentFirst and Studentlast once and have it populate to all three tables.
I can create a form and a query that displays existing entries exactly like how I want to enter them, but of course I can not edit or add to them. I have tried using subforms, but they don't seem to link up. Once I enter the Name, I want it to be on all the forms. I don't want to have type it three times. I also tried creating three separate forms and connect them with the Navigation Form. The issue again is that once I enter the name in one form, it is not automatically on the next form.
I have a bank of 8 machines, I need the user to enter one record for each machine in order. I currently have these machines in a combo box, but any other method would be fine.
When the user opens the data entry screen, I need it to open a data entry with that machine selected and the machine number pasted to the [Machine_No] field, when the user has finished entering the data (mainly yes/no tick boxes) I need them to click a "Next" button and have the data entry form to move on to the next record, the next machine on the list. This needs to be done in machine order as listed. I would then like the "Next" button to be hidden or disabled or changed to "Finished" (Close Form button)when at the last machine in the list.
I have a data entry form to add new records to an Access database file called Claims. An auto-incrementing sequence number (SeqNbr) needs to be kept PER YEAR. If the user enters a date the sequence number pertaining to the year of this date needs to be incremented. The first record within a new year of course takes value 1.Records can be added at random for different years.
A simple SQL-statement can be made to determine the new sequence number:SELECT max(Claims.SeqNbr) + 1 from Claims where year(this.value) = year(Claims.EventDate)...this.value meaning the value of the date control in which the user entered the date.I need to return the new sequence number to another field on the form in which also the COMPANY CODE, YYYY and MM from the EventDate, the new sequence number and the USER INITIALS are concatenated.
I have a form that request the User to enter a Parcel ID number (99-9a-99-99aaa-aaa-aaaa). The sub form asks for the subdivision number, block number, and lot number. The subdivision number, block number and lot number are normally part of the Parcel ID number but sometimes they can be different. I want the sub form to fill in the Subdivision number, block number, and lot number as a default but allow the user to change the value if needed. currently the sub form will only show what is entered into the table itself if a change is made on the main form the sub form does not reflect the change.
I have a simple data entry form with drop down facilities on 2 fields. One of these fields incorporates a drop down list from a table but there are occasions when I wish to make a free text entry for the single record, but do not wish to add it to the drop down list.
I have tried to achieve this with a Combo Box but without success, although I am sure that I have read that it is possible.
I have several comboboxes in my database from which users select values. However, in most cases, I do want to give them the option to add an item that does not appear while simultaneously updating the underlying table which stores those dropdown values. I have made use of the builtin "allow edit list items" feature of Access 2007 but the form always opens on the first record of the form on which they are to add the new item. Is there a way to specify that it should open in Data Entry view apart from using VBA?
