Forms :: Combo Box - Reference Another Column In A Record
Mar 19, 2013
I have a form that has a combo box (box1), Its row source is from a table (table1) than the forms record source (query1). The data box1 sources is from column1 in table1.
I then have a text box (box2). I need it so when i select a record in box1 (from column1) that it displays the corresponding data in that same record (and table) but from column2
Example:
A table has a column with equations and another column with the answer.
I select "1+1" in the combo box
Then in the text box it displays "2"
View Replies
ADVERTISEMENT
Jun 10, 2015
Need to generate a unique reference number each record wise while data entering by a form. How to do this by using a command button ? After entering all fields related to the record, when click on the command button, unique reference number for that record need to be generated and save with all other data of the records. in a later event, need to recall the record by using this reference number and also need to make relation ship with some other table by using the reference number.
View 6 Replies
View Related
Jul 19, 2006
Hey Guys!
I have a problem concerning the ability to make a reference to another column in the same query.
I have two columns. Column 1 works perfectly, but in column 2 I want the outcome of column1 (coachingdato1) inserted instead of #17-07-2006#.
How is that done???
Thanks in advance!
//JR
Column1:
coachingdato1: (SELECT Max(coaching.dato) FROM coaching WHERE sælgerdata.sælgernr = coaching.sælgernr)
Column2:
coaching1: (SELECT coaching.[1] FROM coaching WHERE sælgerdata.sælgernr = coaching.sælgernr AND #17-07-2006# = coaching.dato)
View 10 Replies
View Related
Feb 3, 2015
Basically I have this formula in excel and i'm trying to recreate it in access but i can't quite figure it out.
****a***********b**********c*********d*********e** ******f
3**Car***Cost Center****start****combining*****end*****miles
4**001*****aaa********021****=(A4&" "&C4)***030
5**002*****bbb********030****=(A5&" "&C5)***035
6**002*****aaa********035****=(A6&" "&C6)***040
f4: =IF(COUNTIF($D4:$D600,D4)=0,(E4-C4),(E4-C4)/COUNTIF($D4:$D600,D4))
f5: =IF(COUNTIF($D5:$D601,D5)=0,(E5-C5),(E5-C5)/COUNTIF($D5:$D601,D5))
f6: =IF(COUNTIF($D5:$D601,D5)=0,(E5-C5),(E5-C5)/COUNTIF($D5:$D601,D5))
So basically: If a car is using multiple cost centers for a trip it divides the total mileage among the cost center for said trip provided that the user enters the same start and end mileage on all the cost centers used. And if it doesn't have multiple cost centers it provides the appropriate amount.
=IF(COUNTIF($D4:$D600,D4)
=IF(COUNTIF($D4:$D600,D5)
=IF(COUNTIF($D4:$D600,D6)
and so on
Any way to reference a column in access while referencing a specific point within that column.
View 2 Replies
View Related
Sep 10, 2015
I have created two tables, I want to copy one column from one table to another table column with repeat value in rows.
example :- copy "Material number" column from Table1 to Table 2. In Table 2 Material number will repeat in 20 rows.
Like in excel we give one cell reference to multiple rows.
How I can link table and give reference of column.
View 1 Replies
View Related
Mar 26, 2013
I've created a form with a combo box to allow users to set the Manager of an employee. I've set the control source for the combo box to the Managers table that contains a primary key and the manager's name.
I've set the bound column to 1, the column count to 2, the column widths to 1;2 (I want to show both columns in the drop down because users can identify managers by either their name or Manager ID).After updating the combo box, the Manager ID shows rather than the Manager Name. Is there a way to have the Manager name show instead of the Manager ID without setting the column widths to 0;2?
View 5 Replies
View Related
Mar 25, 2013
I am having a problem entering the 2nd column of a combo box.This is a lookup combo looking at a table called Accessories. The combo is looking up 4 columns in the table, the first column is called "Action" the 2nd column is called "Item". I click on the combo box in the form and decide on the action I want and click that row, it then enters the action I have clicked. But it is the "Item" column I want to enter on the form not the "Action" column.
This only works if I make "Item" the first column which I do not want to do. I want to keep the combo columns in the order they are but enter the 2nd column not the first. I have tried making the bound column the 2nd column but it still enters the 1st column. I am sure access must be capable of doing this but I cannot work out how. It seems you can only enter whatever is in the 1st column.
View 12 Replies
View Related
Apr 30, 2013
In short, I have a form that has a combo box containing people type values. Then two text entry boxes, firstname, lastname. Then an add, update, and delete button...
When the person type is chosen from the cbo, and the names are filled out, and the 'add' button pressed a query sends the values back via sql insert, and a listbox next to these controls then lists the new person records. Great - No worries...
Then, when someone wants to update the record now shown in the listbox, on double click of the record in the listbox, vba repopulates the name text boxes from the listbox's columns values (easy), and then *magically* the person type combo box chooses amongst its values the value stored in the person type column from the listbox.
I can't get the combo box to be set to the value that I am grabbing from the listbox's column values.
Code:
cboContactInfoType.{magic happens here} = ListBoxOfficeContactInfo.Column(3)
txtContactInfoValue = ListBoxOfficeContactInfo.Column(4)
txtContactInfoValue2 = ListBoxOfficeContactInfo.Column(5)
Part of me wonders if I would have to program in a way to search among the combo boxes values and find out which one was selected from the listbox, find it's index value and then set the combo box to be that index/value record... but that seems like a hard way to do it... and I'm not exactly sure how?
View 5 Replies
View Related
Mar 15, 2014
There are 3 column in a combo box, ID is bound column
Part no ID Description
0040 1 class 40-1
0040 2 class 40-2
0040 3 class 40-3
0041 4 class 41-1
0042 5
0042 6
When key in part no 0040, 3 rows under 0040 will be listed out only, filter and match as value entered only. do not show others part no in the combo box selection.
View 1 Replies
View Related
Jan 17, 2014
Am I correct in thinking the only way to have a combo box with different values in each column is to create a table and then bind the combo box to the column you are referring to if you want it to represent a value from another.
For example if I have a combo box with the words January, February etc can that combo box have a corresponding month number value in a separate column (this combo would be derived from a list) or would I need to create a table holding both the month names and numbers and then bind to the name value for selection but use the month number value?
The reason I ask is I wasn't sure if for every type of list I wanted with multiple column values, I would need to create a table.
View 2 Replies
View Related
Mar 4, 2015
I have a multiple column combo box on my form, that is correctly populating. When I make a selection, it displays the result from the first column. Bound column seems correct, as my table is being populated correctly.
1 - Can I display the values from both columns after the selection has been made?
2 - If not, can I choose to display the second column (not the first) after the user has made a selection?
View 3 Replies
View Related
Jun 16, 2014
I have added a combobox to one of the forms in my customer database using the "find a record in my form based on a value in my combobox" section of the combobox wizard.I have a number of columns in the combobox (the primary key is the bound value, and I have unbound columns for first name, surname etc).
I sorted the records in the combobox by column 3 (surname) so I can scroll through the list and choose surname instead of having to memorise customer numbers. Now I have more than 1500 records (with more on the way), scrolling through takes ages, and I was wondering if there is a way to adapt the combobox so I can (for example) type the first letter of a surname into the box and be taken to surnames beginning with that letter, whilst retaining the primary key as my bound column?
My initial thought was to base the combobox values on a query, and make the query prompt for a starting letter (or string of letters) each time it runs, so it only displays the query results in the list, but I was wondering if there is a neater way to do it?
View 2 Replies
View Related
Jul 9, 2014
In my form my combo box displays a list from a query called DORP-HDR that has 3 columns
DORP-ID | CODE | NAME
and displays them like that is the drop down list
The form field that the combo is bound to takes the numeric-id field as its value. In the combo control wizard i nominated that value, and in the properties pane bound column value is 1.
and in the properties pane the row source is:
SELECT [DORP HDR].[DORP-ID], [DORP HDR].[CODE], [DORP HDR].[NAME] FROM [DORP HDR] ORDER BY [NAME];
So far so good. I have created lots of combo boxes before like this.
But this time i want the second field in the list (CODE) ALSO bound to another field in my form . So I want the combo to transfer two values not one. How do i do this?
View 4 Replies
View Related
May 28, 2013
How to change a combo box to a text box control in a subform for a field that is based on a two-column value list. I want to be able show the value in the unbound column (which is a text value instead of a number).
My subform has a field called "ProjectStatus". This field is a value list in my projects table with the following row source:
1;"Built";2;"Unbuilt";3;"Active";4;"On Hold";5;"Completed (Master Plan)";0
So, it is set as a two-column value list with a number data type for the bound column. In my forms, column 1 is made invisible (set to 0") so that only the text value is shown to the user. This works fine with combo boxes.
However, I want to change the unsightly combo box to a text box and show the text value of the unbound column (this form will only be used to show data not for entry). When I change it to a text box control, the value that appears is a number, of course.
If ProjectStatus were based on a table, rather than a lookup value list, I would query it but I am not sure how it should be done with a value list. I could just store the text value instead, I guess, and redo a bunch of stuff or I could create a "Status" table and redo a bunch of stuff (this seems like my lot in life lately) but I feel like there should be some way to do this.
View 6 Replies
View Related
Aug 14, 2015
I want to result as dlookup function in access 2007, when I use dlookup like this
=DLookUp("GPFDed","[SalaryAll]","[EMPID]='" & ![Cmb_EMPID] & "' And [SalMonth]='" & "Jan" & "' And [Salyear]='" & [me]![Label17].[Caption] & "'")
it gives #Name?
What is the problem and how can i change the label caption to Combo box column 2 value...
View 1 Replies
View Related
Mar 31, 2014
I have a form that currently uses a "catch all" table for listing available equipment to choose from for an equipment field. I call it tblEquipment. What I want to do is to make it so when I type a name in (1 of 35) in one field of the current record, the record source for the equipment field immediately looks at a different table that has equipment available only for that name. To do this I plan on making 35 different tables with limited data originally found in tblEquipment. I would call these tblEquipment1, tblEquipment2, etc. I do not use a sub form, nor do I want to.
So my questions are:
1) can this be done
2)If it can be done, how can I do it?
View 3 Replies
View Related
Oct 28, 2014
I have a problem with my database I have a combo box that will search for my record. Actually its working I input the specific number it goes to the specific record. But I want, if there no existing record in my database it will display a Messagebox that "No record Found" I try to put a code in a macro builder in a after update property field but nothing happened.
Expression code that it will display the msgbox if there's no record found.
the given code from macro builder is attached. I try to have an if else statement but I dont know how to not equal that giver conditional expression.
View 10 Replies
View Related
Jul 18, 2013
I have a query that I referenced it to a combo box in a form. In my form I created a combo box which has a list of VendorName and I want my query to opens a VendorName report based on whatever chooses in the combo box so that I use the combo box name in the criteria of the VendorName in my query. Somehow I get an error which says "The Microsoft Office Access database does not organize "[Forms]![Form1]![Vendor_Name]" as a valid field name or expression".
View 10 Replies
View Related
Apr 24, 2014
I have a form that shows multiple rows of linked/child records.The form in question is the "frmFilterNumberTypeView" form. When a particular filter is used (installed on an automobile), I would like to be able to click on the corresponding "Installed 1" button left of the filter number, so that by code, I can reduce the Qty on Hand by One, and insert the corresponding filter ID to the History table, along with the date/time the filter was used.
how to reduce the Qty on Hand, nor how to do the updates to the History table, I'll figure that out myself over the next week or two (hopefully it won't take that long). What I'm trying to figure out here is how I can associate the red "Installed 1" button with the filter to the right of whichever button I press.
how to sort the filter column on this same form. I'm fairly certain that this would be very easy to do if the subform in question was populated by means of a corresponding query, but I'm afraid that if I go that route that I'll spend another 20+ hours trying to figure out how to get the proper filter records to match the filter manufacturer, not to mention having to next figure out how to link the table so that if I modify any particular filter record, that I'll be able to have the associated table update accordingly.
Is it possible to sort the filter column without the subform record source being a query?
View 2 Replies
View Related
Aug 14, 2013
I'm very new to access so I'm not sure about the correct way to go about this. I have a table with a 'category' column, a form which hides the category column, and a combobox to filter the category, let's say R, C, and F.
What I want accomplish is to have the value of the comobox applied to the hidden 'category' column when a user enters a new record into the form.
Is there I way I can get an instance to the record as it's being entered and modify the data using VB? Or would I have to write a sort of pop() function and have it run afterInsert and then modify it that way? Can I even alter the table using VB like this?
View 4 Replies
View Related
Apr 4, 2014
Access 2010. I have a query that I referenced it to a combo box in a form.
If I rename the combo box, save it, and then rename it back to the same name it works fine for a while and then stops working again.
View 5 Replies
View Related
Feb 24, 2006
is there anyway to have the database autogenerate a random 8 digit reference number for each record.. this of course must be unique..
maybe something like
7C7CYU99, or HJUHU889... im sure you get the picture.
View 2 Replies
View Related
Sep 2, 2007
Hey guys-
Been trying to figure this out, but am stuck. Obviously I'm fairly new to Access...
I have a table of properties and the price those properties sold for. Each property is in a specific area of town. I want to take each record and display the Address, Area of town, Price it sold for, and then the AVERAGE PRICE of all the other properties that sold in that same, specific area (not all the other areas of town, but the same area that the property sold for). The result should be displayed as below-
-Address- -Area- -Sold Price- -Avg Sold Price in Area-
And then it will list every property in the database, each with the same calculation all in one grid/table/dataset.
I figured out how to write a query to average all the sold prices in each area- but I don't know how to display that in conjunction with each record. Can someone throw a hint at me here?
Thanks
View 13 Replies
View Related
Mar 1, 2006
Hi All!
I d'like to ask for your help in the following issue:
When I step the records on a form clicking on the arrows below I want refresh some field reacting on this event.
How can I refer to this event in Visual Basic? And how can I bind the VB program to the form? (Because - as I know - there's no field on the properties box for this purpose)
(Or if you know an event equivalent to this record stepping, I think it would do as well)
Thanks in advance.
BR
xxyy
View 5 Replies
View Related
Oct 23, 2007
I have entered one entry in to the database with the correct values (this is record 6) and everytime I enter a new record, the data is the same (I'm using a drop down list) it will automatically appear in the box. But when I goto the table that the data is stored in, each field just has the reference to the first record that the data came from.
Looks a bit like this:
ID Server Name Pattern Engine Program
6 LN1HOME 4.735.00 8.500-1002 5.58.0.1185
7 LN1WORK2 6 6 6
Is there a way of seeing the origonal data in those fields other than the Record ID Number as a reference. :confused:
I know its a lame question, Im just is a learning process at the moment.
thanks in advance.
View 2 Replies
View Related
Dec 30, 2007
I have a query on a form that is providing all of the information I need for everything on my form.
The problem is I don't know how to refer to a field's value in the query in VBA without having a hidden text field on the form.
I know I can reference a combo box's query to include criteria such as [Forms]![cboSelectStudent] if the control is actually on the form, but how would I refer to a value in the form's query that doesn't have a control on the form.
I've been searching for everything I can think to call this but haven't been able to come up with anything.
Thanks.
View 6 Replies
View Related
